Used Doosan Hp 6300 for sale (269)

Condition: ready for operation (used), Year of construction: 2014, operating hours: 19,865 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: FANUC, controller model: Series 31i-model B, total height: 3,422 mm, total width: 7,297 mm, table load: 1,500 kg, overall weight: 18,000 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 40, tool weight: 30,000 g, product length (max.): 3,780 mm, number of axes: 4, This 4-axis DOOSAN NHP6300 was manufactured in 2014. It features an impressive X-axis travel of 1,050 mm, Y-axis travel of 900 mm, and Z-axis travel of 1,000 mm. The machine includes a maximum pallet load of 1,500 kg and a tool capacity of 40 tools. If you are looking to get high-quality machining capabilities, consider the DOOSAN NHP6300 horizontal machining centre we have for sale. Contact us for further details. Csdpjzh Hpfjfx Akteri • Distance from top of pallet to spindle center: 100–1,100 mm • Distance from pallet center to spindle nose: 75–975 mm • Pallet • Type: Indexing (rotary) • Indexing angle: 1° • Size: 630 × 630 mm • Maximum load: 1,500 kg • Mounting pattern: 24 × M16 × P2.0 {5–18H8} • Maximum workpiece size (Ø × H): Ø1,050 × 1,350 mm • Spindle • Speed: 10,000 rpm (options: 6,000 / 15,000 rpm) • Taper: ISO 50 (7/24 taper) • Maximum torque: 489 Nm (options: 599.8 / 350 Nm) • Feed rates • Rapid traverse (X/Y/Z): 60 / 60 / 60 m/min • Maximum cutting feed: 30,000 mm/min • Automatic Pallet Changer (APC) • Number of pallets: 2 • Type: Rotary shuttle • Change time: 12 s • Drive: Servo motor • Automatic Tool Changer (ATC) • Tool interface: BT / CT / DIN (HSK optional) • Magazine type: Chain • Standard capacity: 40 tools (options: 60 / 90 / 120 / 150) • Matrix magazine capacity: 196 / 256 / 316 / 376 tools • Maximum tool diameter: Ø130 mm (Ø125 mm per note) • Maximum tool diameter with adjacent pockets empty: Ø320 mm • Maximum tool length: 630 mm (HSK: 700 mm) • Tool-to-tool change time: 2.0 / 3.5 s • Chip-to-chip change time: 5.0 / 6.5 s • Motor power and utilities • Spindle motor: 25 / 30 kW (options: 22 / 30, 50 / 55 kW) • Compressed air supply: 0.54 MPa • Tank capacities • Coolant: 925 l • Lubrication: 7.2 l Additional equipment • Fastems automation system Technical Specification Taper Size ISO 50

Condition: good (used), Year of construction: 2014, functionality: fully functional, DOOSAN Horizontal Machining Center Model: NHP 5500 Year: 2014 Control Unit: FANUC 31I-MODEL B X-axis travel: 800 Y-axis travel: 750 Z-axis travel: 850 Table length: 500 Table width: 500 Max. workpiece size (length x width x height): D.850x1100 Table surface: Tapped holes Max. workpiece weight: 800 kg Spindle: 10000 rpm with oil-cooled, double-contact flange Spindle connection: ISO 50 Torque (cont. / 10 min): 600 NM Rapid traverse rate (xyz axes): 60,000 Number of tools: 60 Coolant pressure: 70 Bar Coolant tank capacity: 500L Height: 3495 Width: 3930 Depth: 6520 Weight: 18000 Pallet size: 500x500 Chip conveyor: Scraper type -EXTERNAL 4-WAY HYDRAULIC LOCKING SYSTEM, 70 BAR, WITH LOCK/UNLOCK SWITCH -INTERNAL/EXTERNAL AIR BLOW FUNCTION, ADJUSTABLE "M" FUNCTION -AUXILIARY PUMP FOR SHOWER WASHING, CALPEDA 15 BAR Crodpfx Aez Apb Toktji -PREPARATION FOR ROBOT ELECTRICAL CONNECTION (FANUC) -INTERNAL TOOL LENGTH AND RADIUS OFFSETTING SYSTEM, RENISHAW TS27R. A NEW, IDENTICAL UNIT IS AVAILABLE IN STOCK IN CASE OF FAILURE. -PREPARATION FOR WORKPIECE MEASUREMENT AND OFFSETTING PROBE WITH RENISHAW RMP60 CYCLES (RADIO TRANSMISSION)

Condition: used, Year of construction: 2015, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 750 mm, Doosan HP5100II Horizontal Machining Center Year of manufacture: November 2014 Control: Fanuc 31i Travels: X-axis: 850 mm Y-axis: 700 mm Z-axis: 750 mm B-axis: 0.001° Automatic pallet changer Table: 500x500 mm Codpox Sq Uvefx Aktsri Spindle max. 14,000 rpm Spindle taper: BT40 Tool magazine for 60 tools Renishaw workpiece measuring probe Chip conveyor Through-spindle coolant (IKZ)

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, CNC Fanuc 18i - MB TRAVELS: X axis: mm 850 Y axis: mm 700 Z axis: mm 750 Distance from spindle center to pallet top: mm 50 - 750 Distance from spindle nose to table center: mm 150 - 900 TABLE: Pallet size: mm 500 x 500 Pallet loading capacity: kg 500 Pallet surface: 24 – M16 x P 2.0 Pallet index degree: deg 1 SPINDLE: Max spindle speed: Rpm 14.000 Spindle taper: ISO 40 Max spindle torque (25% ED): Nm 220,5 Credpfxovw Uyuj Aktji FEEDRATE: Rapid traverse rate (X, Y, Z): m/min 60 Cutting feedrate: mm/min 30.000 AUTOMATIC TOOL CHANGER: Type of tool shank: MAS403 BT40 Tool storage capacity: 120 Max tool length: mm 400 Max tool weight: kg 10 Method of tool selection: Fixed address Tool change time (tool-to-tool): sec 1 Tool change time (chip-to-chip): sec 3,5 AUTOMATIC PALLET CHANGER: Number of pallet: 7 Type: Rotary shuttle Pallet change time: sec 7,5 Pallet rotation in loading station: deg 90 MOTOR: Spindle motor (30 min): kW 18,5 / 22 Feed motor (X, Y, Z, B): kW 7,0/7,0/7,0/2,7 MACHINE SIZE: Machine height: mm 3.000 Machine dimension: mm 5.600 x 2.700 Machine weight: kg 15.000 Machine equipped with: • High pressure through the spindle 35 bar • Chip conveyor • Instruction manuals and CE declaration

Condition: good (used), Year of construction: 2013, Excellent horizontal machining center with Fastems automation system for 10 pallets. Built in 2012, first used in 2013. Cjdpfeypb Srjx Akteri Including: Automatic pallet changer Internal cooling Renishaw tool sensor Chip evacuation Through-spindle cooling (IKZ) Machine can be seen in operation upon appointment. Immediately available for delivery. More info and videos available on request. Control Fanuc 31i X-axis 850 mm Y-axis 700 mm Z-axis 750 mm B-axis (rotation) 360° Table 500x500 mm Spindle Maximum 14,000 rpm Spindle taper SK40 Number of tools 2 x 60 positions Spindle hours ca 12000h Machine weight approx. 16 tons Floor space required approx. 9000 × 9000 × 2850 mm (including FMS) Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: like new (used), Year of construction: 2017, operating hours: 2,450 h, functionality: fully functional, Machine with 4+1 axis operation CNC FANUC Like new condition, with only 5,000 operating hours and 2,450 spindle hours Spindle DIN 12,000 rpm with coolant system Chip conveyor 60-position tool changer High-pressure coolant through the spindle RENISHAW TS-27 tool presetter Roof with motorized top opening for crane loading Overhead table, 700mm diameter, with threaded holes for fixture positioning (removable) Crsdpfxo Ah T Nno Aktoi

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, feed rate X-axis: 45,000 m/min, controller manufacturer: HEIDENHAIN, controller model: TNC530, spindle speed (max.): 12,000 rpm, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, Specifications Chip conveyor and set of tool holder. With hydraulic clamp with control unit. Credpfxs Ah S Etj Aktsi Table dimensions: 1200x540 mm Capacity Longitudinal X-travel: 1270 mm Cross Y-travel: 670 mm Vertical Z-travel: 625 mm Spindle Spindle nose: SK40 ISO Spindle speed: 12000 giri/min. Motor power: 18,5 Kw Rapid X,Y,Z axis: 45000 mm/min Tool Stations: 30 nr.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: MV0083-000047, overall weight: 5,500 kg, DOOSAN DNM 200/5AX – CNC 5-axis machining center – Year of manufacture 2015 For sale is a well-maintained DOOSAN CNC machining center, model DNM 200/5AX, in very good condition. Technical data: Cedpfxj Ahkdqj Aktjri Year of manufacture: September 2015 Travel distances X / Y / Z: 400 / 435 / 500 mm Spindle speed: up to 12,000 rpm Spindle power: 18.5 / 11 kW Rotary table diameter: 200 mm A-axis: +30° to −120° C-axis: 360° Rapid traverse rate X / Y / Z: 36 / 36 / 30 m/min Machine weight: 5,500 kg Connection: 380 V, 50/60 Hz

Condition: used, Year of construction: 2012, Doosan Puma TT1800SY Twin Turret Multi Axis CNC Lathe (2012), 230mm Swing, 230mm Max Turned Diameter, 230mm Maximum Turning Length, 12 + 12 Station Turrets, 65mm Bar Capacity, 5000rpm 15KW Main Spindle, Fanuc 31i Control, C Axis to both Spindles, 5000rpm Sub Spindle, +/-50mm Y Axis, Coolant, Swarf Conveyor, Tool Setter, Parts Catcher, Hydrafeed Multifeed Magazine Bar-feed. S/No. ML0177-000555, Machine Weight: 9000kg. Country of Origin: Korea Crodpfx Akj Ah E Nnetei Location: This lot is located in Leicester, UK. A charge of £350 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: used, Year of construction: 2013, Doosan DNM650 Vertical Machining Centre (2013), Traverses X Y Z: 1300 x 650 x 510mm, Table 1200 x 540mm, Spindle Speed 12,000rpm, BT40 Spindle Taper, Spindle Motor 17kW, FANUC Oi Control, 30 Station ATC, Low Volt light, Through Spindle Coolant. S/No. MV0011-000877, Machine Weight: 8500kg. Country of Origin: Korea Csdpfxj Ah E S Ho Aktori Location: This lot is located in Leicester, UK. A charge of £250 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 570 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, torque: 118 Nm, controller manufacturer: FANUC, controller model: FANUC I SERIES, spindle speed (max.): 12,000 rpm, distance table to spindle center: 150 mm, spindle nose: BT40, number of slots in tool magazine: 30, Equipment: chip conveyor, CNC milling machine of medium dimensions, intended for both rough and fine processing. A powerful motor in combination with high rigidity and a high-precision base spindle enable large removals and precision. The machine is a suitable answer to a wide range of requirements in production, especially in toolmaking. The machine is sold as a set with the equipment described in the listing. Machine is is good condition and regularly maintained. -15 " display -2MB part program storage - 1000 programs - 12.000 RPM spindle 18,5kW, 118Nm -BT40 -30 tools magazine - 12 bar through the spindle cooling -oil skimmer belt type -ethernet connection -coolant gun -ball screw nut cooling -tool breakage detection in magazine -automatic doors -robot interface -4th axis preparation -Hiwin RCV 250 rotary table -HIWIN RTS 250 suport -Hidraulic aggregate 200 bar 2 A+B -4th axis fixture support hydraulic (3x oil, 2x air) -seat air check -level sensor for coolant liquid Codpfx Ako Af U Ezoteri -LNS MH500 chip conveyor -mist collector interface

Condition: used, Year of construction: 2006, MAKE DAEWOO DOOSAN, MADE IN KOREA MODEL MYNX SERIES NM 410 YEAR 2006 CONTROL FANUC 0iMC TABLE SIZE 920.0 x 430.0mm TRAVERSES (X, Y, Z axes) 762.0 x 410.0 x 510.0mm SPINDLE SPEED Upto 8,000rpm SPINDLE SIZE BT 40 ATC 20 stations SPINDLE POWER 11.0Kw/15.0HP MAX. TABLE LOAD 600.0kgs MACHINE DIMENSIONS 2200.0 x 2600.0 x 2600.0 mm MACHINE WEIGHT 5000kgs PLUS SIDE ARM TOOL CHANGER Crsdpfe Ah Td Sex Aktei COOLANT SYSTEM SET OF MANUALS

Condition: used, Year of construction: 2013, functionality: fully functional, turning diameter: 370 mm, spindle bore: 76 mm, spindle speed (max.): 3,500 rpm, rotational speed (max.): 712 rpm, Equipment: rotational speed infinitely variable, DOOSAN LYNX300M (32,000 euros) - CNC: FANUC - Chuck diameter: 250 mm - Swing over bed: 651 mm - Max. turning diameter: 370 mm - Max. turning length: 712 mm - Spindle bore: 76 mm - Spindle speed: 3,500 rpm - C-axis - Main spindle motor: 15 kW - Rapid traverse rates X/Z: 30/24 m/min - BMT 55 turret: 12 positions Crsdpfs Ady Htsx Aktei - Rotating tool speed: 5,000 rpm - Machine weight: 3.6 t - Overall dimensions: 3 x 1.8 x 1.7 m

Condition: ready for operation (used), Year of construction: 2012, overall weight: 3,500 kg, bar diameter (max.): 32 mm, controller manufacturer: FANUC, controller model: Series 31i-MODEL A, number of axes: 7, This 7-axis DOOSAN Puma ST32G was manufactured in 2012. It features a maximum machining diameter of 32 mm and includes a main spindle with a Z1/C1 axis. The machine is equipped with 6 turning tools and 4 driven cross-machining tools, providing versatile capabilities. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma ST32G swiss type turning machine we have for sale. Contact us for further details. Crodps Ahzbdsfx Aktoi - Completely overhauled in 2022- Maximum Machining Diameter: 32 mm- Number of Axes: 7 (X1, Z1, C1, Y, X2, Z2, C2)- Main Spindle (Front Side): 1, Z1 / C1 Axis- Turning Tools (Front Side): 6 pieces (12 x 12 x 120)- Cross-Machining Tools (Front Side): 4 pieces (ER16) driven- Tool Holders (Front Side): 4 pieces (ER16M) driven- Sub-Spindle (Rear Side): 1 piece, X2 / Z2 / C2 Axis- Rear Tool Holder: 2 fixed tools and 2 driven tools- Deep-Hole Drilling: 2 tools- CNC Control Unit: FANUC Series 31i-MODEL A- Power Supply: AC 200/220V, 3 Phase, PE, 50/60 Hz- Rated Power: 21.04 kW- Interrupting Current: 5.0 kA- Full Load Current: 33.18 A- Short Circuit Current: 10.0 kA- Circuit Diagram Version: ST20H31AA09- Machine Weight: 3,500 kg- Optional Equipment:Profluid High-Pressure Coolant System (Model: PFMF-7015-S4)Bar feeder FMB TURBO 3-36 / 3200 (2012) Technical Specification Counter Spindle Yes

Condition: like new (used), Year of construction: 2022, operating hours: 400 h, functionality: fully functional, turning length: 1,030 mm, turning diameter: 460 mm, spindle bore: 81 mm, spindle speed (max.): 3,500 rpm, travel distance X-axis: 265 mm, travel distance Z-axis: 1,100 mm, Doosan Puma GT2600LM, 2022. Machine with only 400 operating hours. Excellent condition. Fanuc 0i-F Plus iHMI-Touch control with Manual Guide. Max. turning length: 1030 mm Max. turning diameter: 460 mm Chuck: 250 mm Spindle bore: 81 mm Spindle: ASA A2-8 Max. spindle speed: 3500 rpm Motor: 18.5/22 kW 12-tool turret, BMT 55 Axis travels: -X: 265 mm -Z: 1100 mm -C: +-360° Live tooling Renishaw tool probe Tailstock Csdpfx Ako Aba D Hjtsri Part catcher Included with the machine: - Chip conveyor with collection tank - High-pressure pump - Documentation - 4 live tooling holders (2 angular, 2 straight)

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, controller manufacturer: HEIDENHAIN, controller model: TNC-620, workpiece weight (max.): 1,300 kg, total height: 3,100 mm, total length: 4,400 mm, total width: 2,450 mm, table width: 670 mm, table length: 1,600 mm, overall weight: 9,000 kg, spindle speed (min.): 80 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, distance table center to spindle nose: 775 mm, spindle nose: ISO 40, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, Used 3-axis vertical machining center with Heidenhain TNC-620 CNC Codpfx Ae Afpq Roktori

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 1,525 mm, travel distance Y-axis: 762 mm, travel distance Z-axis: 625 mm, overall weight: 13,500 kg, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis DOOSAN Mynx 7500 was manufactured in 2011. It features an impressive X-axis travel of 1,525 mm, Y-axis travel of 762 mm, and Z-axis travel of 625 mm. The machine is equipped with a spindle speed of 12,000 rpm and a tool changer capacity of 30 stations. If you are looking to get high-quality machining capabilities, consider the DOOSAN Mynx 7500 vertical machining centre we have for sale. Contact us for further details. - Control Unit: DOOSAN-FANUC i Series - Tool Changer Capacity: 30 stations - Through-Spindle Coolant (TSC): 20 bar - External Coolant: Yes - Measuring Probe: Renishaw probe - Operating Hours - Cutting Time: 40,592 h - Operating Hours - Cycle Time: 2,760 h - Operating Hours - Part Count: 277 - Power Supply: AC 200/220V, 3 Phase, PE, 50/60 Hz - Rated Power: 38.35 kVA - Full Load Current: 137.34 A - Interrupting Capacity: 5 kA - Short Circuit Capacity: 10 kA - Total Machine Weight: 13,500 kg Technical Specification Crodj Ah Exdopfx Aktei Taper Size SK 40

Condition: excellent (used), Year of construction: 2022, operating hours: 1,400 h, spindle bore: 81 mm, DN Solutions PUMA 2600YII, year 2022 Fanuc i series Plus Axis travels: Crjde Ahxl Rjpfx Aktoi Z-830mm X-260mm Y-105mm B-830mm Max. Turning diameter: 376 mm Max. Turning length: 760 mm Standard chuck size: 10 inches Diameter when working with bar stock: 81mm Max. Spindle speed: 4000 rpm Max. Spindle power: 22 kW Built-in spindle (electric spindle) BMT65 turret with 24 positions C-axis driven tools Tailstock Tool probe Chip conveyor Prepared for bar feeder 4 driven tool holders (2 angled, 2 straight) 8 standard tool holders Chip conveyor with tray and pump Documentation Specification – PDF file

Condition: ready for operation (used), Year of construction: 2024, operating hours: 54 h, travel distance X-axis: 1,630 mm, travel distance Y-axis: 762 mm, travel distance Z-axis: 650 mm, controller manufacturer: FANUC, controller model: i-Series, total height: 3,170 mm, total width: 3,850 mm, table width: 1,630 mm, table length: 760 mm, table load: 1,500 kg, overall weight: 13,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 28,000 W, number of slots in tool magazine: 30, tool weight: 8,000 g, product length (max.): 3,480 mm, number of axes: 3, This 3-axis DOOSAN DNM 750 II was manufactured in 2023. It features a generous X-axis travel of 1,630 mm, Y-axis travel of 762 mm, and Z-axis travel of 650 mm. The machine has a maximum table load capacity of 1,500 kg and a spindle speed range of up to 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 750 II vertical machining centre we have for sale. Contact us for further details. Crsdps Ahpqmefx Aktoi - Manufacturer: DN SOLUTIONS- Model: DNM 750 II- Year of Manufacture / Build Date: 12/2023- CNC Control: FANUC i-Series (Fanuc F0i Touch with Manual Guide / EZ Guide and Fanuc HMI)- Screen Size: 15" Touch Screen- Operating Hours:* Control On (STRG EIN): 299 h 5 min* Operating Time / Run Time: 53 h 54 min 14 s* Machining Time: 40 h 15 min 28 s* Cycle Time: 0 h 0 m 0 s- Travel X-Axis: 1,630 mm- Travel Y-Axis: 762 mm- Travel Z-Axis: 650 mm- Table Size: 1,630 x 760 mm- Table Surface: T-slots (5 - 125 x 18H8)- Max. Workpiece Dimensions / Height: 725 mm- Max. Table Load Capacity: 1,500 kg- Distance Spindle Nose to Table Surface: 150 - 800 mm- Rapid Traverse (X / Y / Z): 30 / 30 / 24 m/min- Max. Cutting Feedrate: 12,000 mm/min- Acceleration / Deceleration Time (X / Y / Z): 150 / 160 / 150 ms- Axis Drive Motor Power (X / Y / Z): 4 / 4 / 4 kW- Ball Screw Diameter x Lead (X / Y / Z): 45 x 12 mm / 45 x 12 mm / 45 x 10 mm- Positioning Accuracy (X / Y / Z): 0.014 mm / 0.008 mm / 0.008 mm- Repeatability (X / Y / Z): 0.007 mm / 0.005 mm / 0.005 mm- Spindle Speed Range: Up to 12,000 rpm- Spindle Drive Type: Direct Connection (Type 2)- Spindle Motor Power (Continuous / S3 25%): 11 kW / 28 kW- Spindle Base Speed: 1,500 rpm- Max. Spindle Torque: 159.3 Nm (S3 15%)- Spindle Clamping Force: 7.35 kN- Tool Holder Taper: SK40 (converted to SK40 per order confirmation DIN 69871 / ISO 7388-3; convertible to BT40 / BBT40)- Spindle Cooling Tank Capacity: 40 L (Cooling capacity 1.56 kW at 50 Hz / 1.76 kW at 60 Hz)- Tool Storage Capacity: 30 tool stations- Tool Selection Type: Memory Random- Max. Tool Diameter (Continuous): 80 mm- Max. Tool Diameter (Adjacent Pots Empty): 125 mm- Max. Tool Length: 300 mm- Max. Tool Weight: 8 kg- Max. Tool Moment: 5.88 Nm- Tool-to-Tool Time: 1.6 s (50 Hz) / 1.3 s (60 Hz)- Chip-to-Chip Time: 4.0 s (50 Hz) / 3.7 s (60 Hz)- Through-Spindle Coolant (TSC / IKZ): Middle pressure, 4.0 kW pump, 20 bar, 25 µm cyclone filter- External Flood Coolant: 1.8 kW pump, 7 bar, 30 L/min- Coolant Flush Pump (Inside Flushing): 1.1 kW, max. 0.75 MPa (50 Hz), 20 L/min- Coolant Tank Capacity: 520 L- Coolant Gun: Included (with separate pump 0.6 kW)- Air Gun: Included- Spindle Compressed Air Blow: Compressed air outlet above spindle for chuck/fixture cleaning- Oil Skimmer: Belt type- Mist Collector / Oil Mist Extraction: Dormatec AF-30P (0.75 kW, 29 m³/min capacity, 200 mm inlet, H13 filter, 99.

Condition: used, Year of construction: 2007, functionality: fully functional, spindle bore: 52 mm, spindle speed (max.): 6,000 rpm, spindle motor power: 15 W, overall weight: 3,500 kg, For sale: DOOSAN LYNX 220MA CNC turning center, year 2007, equipped with driven tools, C-axis, and FMB SL 80 S automatic short-bar feeder. Technical specifications Manufacturer: DOOSAN Infracore Model: LYNX 220MA Year of manufacture: 2007 CNC control: DOOSAN-FANUC Maximum turning diameter: 250 mm Maximum turning length: 290 mm Maximum bar capacity: 51 mm Main spindle speed: 6,000 rpm Main spindle motor: 15 / 11 kW Chuck size: 6" Turret: 12 stations Driven tools / live tooling: Yes Maximum live tool speed: 6,000 rpm Live tooling motor: 3.7 kW C-axis: Yes Cedpfx Aks Aay Ntetori Included equipment FMB SL 80 S automatic short-bar feeder Driven-tool turret C-axis for milling and drilling operations Chip conveyor Tool holders visible in the photographs The machine is suitable for automatic bar machining, including turning, drilling, tapping, and milling operations. Location: Slovenia, EU

Condition: used, Year of construction: 2007, operating hours: 67,434 h, functionality: fully functional, machine/vehicle number: PT18SY0210, turning length: 300 mm, turning diameter: 230 mm, spindle motor power: 18,500 W, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 205 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 350 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 6,000 rpm, feed length Z-axis: 350 mm, feed rate Z-axis: 30 m/min, chuck outer diameter: 250 mm, bar diameter (max.): 65 mm, overall weight: 8,800 kg, We are offering a high-performance and reliable Doosan TT1800SY CNC turning center, ideal for demanding serial production as well as complex precision machining. Key Features: Dual spindle (main + sub spindle) Y-axis for off-center and complex machining Twin turret system (upper + lower turret) Live tooling capability Full spindle synchronization (simultaneous machining) High productivity with reduced cycle times Technical Specifications: Max. turning diameter: approx. 230 mm Max. turning length: approx. 300 mm Bar capacity: approx. 65 mm Spindle speed (main/sub): up to 5,000 rpm Spindle motor power: ~18.5 kW Y-axis travel: ±50 mm X/Z axis travels: approx. 205 mm / 350 mm Rapid traverse rates: up to 30 m/min Turrets: 2 × 12 stations Live tooling speed: up to 6,000 rpm Codpfx Ajy D Rypoktjri Tool holders: BMT55 Control system: FANUC 18iTB C-axis: both spindles

Condition: used, color: other, Year of construction: 2019 Operating hours: 3.096 Power internal combustion engine: 2856 HP (2101 kW) GVW: 36.200 kg Codpfx Aet Uyxaokteri Make of engine: Doosan CE mark: yes Serial number: DWGCECEBVK1020400 Machines for Sale Browse our website for a variety of machines ready for purchase. We have more options than what you see online, so feel free to call or email us anytime. All our machines are fully maintained and checked for reliability. Need pictures? Just contact us, and we'll share them promptly. We're here to assist you in Dutch, English, French, German, Spanish and Russian. Discover our wide range of reliable machines.

Condition: used, Year of construction: 2018, functionality: fully functional, turning length: 760 mm, turning diameter over cross slide: 630 mm, turning diameter: 376 mm, spindle motor power: 33,000 W, spindle speed (max.): 4,000 rpm, spindle bore: 91 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 53 mm, travel distance Z-axis: 830 mm, bar passage: 81 mm, controller manufacturer: Siemens, controller model: 828D, number of tool stations in tool turret 1: 24, number of driven tool stations in tool turret 1: 12, CNC turning machine with counter spindle, driven tools, and Y-axis. • Max. turning diameter over bed: 780 mm • Max. turning diameter over slide: 630 mm • Max. turning length: 760 mm • Torque of the main spindle: 719 Nm Codps Ad U Uxsfx Aktjri • Spindle mounting (main spindle): a2 #8 • Speed of the counter spindle: 6000 rpm • Power of the counter spindle (30 min): 18.2 kW • Torque of the counter spindle: 220 Nm • Spindle mounting (sub): a2 #5 • Number of stations: 24 (12 driven) Additional equipment: • Renishaw Equator • Rotary turret magazine • Portal robot • Portal loader (Mekiload) Machine can be inspected while powered on. Portal loader can also be sold separately.

Condition: ready for operation (used), Year of construction: 2000, overall weight: 12,500 kg, Vertical, heavy-duty CNC turning machine with Fanuc control; 630 power chuck; 850 mm turning diameter; no driven tools; good condition; chip conveyor; various tool holders; machine manuals and documentation; without coolant tank and pumps – can be retrofitted if required; ideal for dry machining. Crodpo Aggdhsfx Aktji

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, controller manufacturer: Fanuc, controller model: Fanuc, table width: 670 mm, table length: 1,500 mm, table load: 1,300 kg, spindle speed (min.): 12,000 rpm, number of spindles: 1, Manufacturer: Doosan Model: DNM 6700 Year: 2018 Condition: (Used) Excellent Control: Fanuc Control Accessories: Kitagawa 4th Axis, Renishaw Spindle Probe, Tool Probe, Swarf Conveyor, Mist Extraction Unit & Manuals. LOCATION: COVENTRY, UNITED KINGDOM MACHINE SPECIFICATIONS Control: Fanuc Control X Axis Travel: 1300mm Y Axis Travel: 670mm Z Axis Travel: 625mm Credpfx Akjzwhtkjtei Max Workpiece Weight: 1300kg Spindle Speed: 12,000rpm Table Size: 1500 x 670mm Tool Change Capacity: 30 ATC Tool Size: BT40