Used Doosan Hp 6300 for sale (308)

Condition: used, color: orange, Year of construction: 2021, operating hours: 3,450 h, Equipment: air conditioning, Year of manufacture: 2021 Empty weight: 36.000 kg Dimensions (LxBxH): 1141 x 300 x 364 cm Godpfxsxqn N Es Ah Eobw Track width: 60 cm Digging depth: 6.94 m

Condition: used, Year of construction: 2012, machine/vehicle number: MB0001-000031, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,200 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, feed length Y-axis: 6 mm, feed rate X-axis: 6 m/min, feed rate Y-axis: 6 m/min, feed rate Z-axis: 6 m/min, controller manufacturer: FANUC, controller model: 32i Model A, workpiece diameter (max.): 2,550 mm, workpiece weight (max.): 7,000 kg, total height: 4,200 mm, total length: 5,540 mm, total width: 5,930 mm, table width: 1,400 mm, table length: 1,600 mm, overall weight: 29,000 kg, spindle speed (max.): 3,000 rpm, distance table center to spindle nose: 1,750 mm, spindle motor power: 26 W, spindle nose: BT50, number of slots in tool magazine: 60, tool length: 600 mm, tool diameter: 250 mm, tool weight: 30 g, B Axis: 1 degree Gedpfxoxm Sxvo Ah Eebw Control: FANUC 32i-Model A Distance from Spindle Nose to Table Top: 0 - 1500mm Distance from Spindle Nose to Table Centre: 550 - 1750mm Machine Dimensions: 5540 x 5930 x 4200mm Machine Weight: 29000kg Maximum Cutting Feedrate: 6m/minute Maximum Tool Diameter: 250mm Maximum Tool Length: 600mm Maximum Tool Weight: 30kg Maximum workpiece weight: 7000kg Rapid Feedrates: WXYZ: 6 x 12 x 12 x 12m/minute Spindle Diameter: 110mm Spindle Motor Power: 26/22kW Spindle Speed: 3000rpm Swing: 2550mm Table Size: 1400 x 1600mm Tool Change Capacity: 60 Station Tool Size: BT50 Traverses XYZ: 2000 x 1500 x 1200mm W Axis: 500mm Coolant, Low Volt Light, Swarf Conveyor, Long Reach Right Angled Milling Head, Tool Length Measurement Probe, Renishaw Work Probe, Fully Enclosed machine guards.

Condition: ready for operation (used), Year of construction: 2020, General Data Measurements width 3517 mm Measurements depth 2300 mm Measurements height 2805 mm Machine weight 12000 kg Control Unit Brand FANUC Model FANUC 31i-B Godpfx Ahjxrwk Ie Eebw Main Drive Number of axis 9 Workpiece Workpiece drm over bed 750 mm Additional Equipment Full licenses for MasterCam software available for programming Mastercam Lathe Mastercam Mill 3D Mastercam Multiaxis Mastercam DOOSAN PUMA MX2100ST Machine Environment Additional Mastercam Mill 3D license available for an extra price This 9-axis DOOSAN MX2100ST turn-mill centre was manufactured in 2020, featuring a swing over bed of 750 mm and a maximum working length of 1020 mm. It supports a bar working diameter of 65 mm and includes comprehensive Y, A, C1, C2, and B axis movements for versatile machining capabilities. If you are looking to get high-quality turning and milling capabilities, consider the DOOSAN MX2100ST machine we have for sale. Contact us for more information. Application Types Turning

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 3 h, load capacity: 3,000 kg, lifting height: 4,730 mm, free lift: 1,400 mm, fuel type: gas, mast type: triplex, construction height: 2,165 mm, fork length: 1,200 mm, empty load weight: 4,580 kg, total length: 2,800 mm, drive type: Treibgas, construction width: 1,200 mm, LPG forklift Load centre of gravity: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Technical condition: New Front tyres type: Superelastic Front tyres condition: 80 - 100% Rear tyres type: Superelastic Rear tyres condition: 80 - 100% Gedpfx Ahetnpaio Ejbw Description: New device Side shift, 3rd valve, 4th valve, rear work light, front work light, full free lift, CE certificate,

Condition: excellent (used), Year of construction: 2013, Doosan Puma MX2600ST Fanuc 31i-A with Manual Guide i Swing over bed: Ø 1000 mm Max turning diameter: Ø 760 mm Max part length: 1540 mm Bar capacity: Ø 76 mm Movement: X1: 630mm Z1: 1585 mm Y: 230 mm (± 115 mm) X2: 220mm Z2: 1515 mm A: 1550 mm Left/right spindle: Spindle speed: 4000 rpm Spindle nose: A2-8 Spindle power: 22/26 kW C-axis: 360° (0.001) Milling spindle: 12,000 rpm Spindle power: 15/18.5/22 kW Gjdpfx Ajv Hyf Ujh Ejbw Spindle taper: Capto C6 B-axis: 0.001° Lower turret: 12 stations, 4000 rpm, BMT65P Tool magazine: 40 positions Automatic tool measurement Swarf conveyor Coolant for driven tools Coolant through milling spindle 1.5 KW , 2.0 MPA , 21.6 l/min Coolant pump for lower turret 2.2 KW , 1.0 MPA , 30 l/min Cutting force monitoring

Condition: used, Year of construction: 2019, operating hours: 4,542 h, Serial number: D1N0DA30LK074xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21136 Gsdsw Rkcpepfx Ah Eebw Specifications: Model year: 2019 Hours: approx. 4,542 Power: 270 kW / 375 hp Drive: 6x6 Tires (see photos) Road registration (white plates) High tailgate Central lubrication Reversing camera LED work lights Radio / CD Air conditioning / AC Length: 955 cm Width: 299 cm Wheelbase: 411 / 177 cm Operating weight: 24,600 kg Max payload: 26,825 kg Description: 2019 Doosan DA30 articulated dump truck.The machine is equipped with central lubrication, high tailgate, and a reversing camera.It has been under a service agreement and is well maintained.Ready for delivery on short notice. HK: 375 Hours: 4542 Own weight: 24600 Model: DA 30 Dumper

Condition: used, power: 127 kW (172.67 HP), lifting height: 2,750 mm, Year of construction: 2015, operating hours: 6,620 h, Year of manufacture: 2015 Godpfx Ahjxavako Ejbw Empty weight: 14.400 kg Dimensions (LxBxH): 772 x 264 x 328 cm Engine type: Doosan Doosan DL06K Tier IIIB Bucket volume: 2.5 m^3

Condition: used, Year of construction: 2014, operating hours: 9,395 h, * Doosan DX 180 LC-3 tracked excavator * Year: 2014 * Operating hours: 9,395 h * ??Dozer blade?? * Air conditioning * Weight: 18,040 kg * 1 x Verachtert quick coupler * More photos and videos available via Whatsapp * Information supplied without guarantee; subject to prior sale. Gbodpfx Ajxvhc Nsh Eew

Condition: ready for operation (used), Year of construction: 2012, General Data Measurements width 2100 mm Gsdpfxjxtq T So Ah Esbw Measurements height 2000 mm Measurements depth 4000 mm Movement X-Axis Movement 2400 mm Z-Axis Movement 800 mm Y-Axis Movement 960 mm This 3-axis DOOSAN VM 960L was manufactured in 2012. It features a working area of 2400 × 960 mm and axis travel of 2400 × 960 × 800 mm. Equipped with a spindle speed of 5000 rpm and an ISO 50 tool holder, it includes FANUC CNC control and magnetic tables. If you are looking to get high-quality milling capabilities, consider the DOOSAN VM 960L machine we have for sale. Contact us for more information. Application Types Milling

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 170 h, load capacity: 7,000 kg, lifting height: 3,500 mm, free lift: 205 mm, fuel type: gas, mast type: simplex, construction height: 2,745 mm, fork length: 1,500 mm, empty load weight: 10,700 kg, total length: 3,700 mm, drive type: Treibgas, construction width: 2,110 mm, LPG forklift Load center: 600 Gbodpexp S Euofx Ah Ejw Mast type: Standard Technical condition: very good Front tires type: Superelastic Front tires condition: 80 - 100% Rear tires type: Superelastic Rear tires condition: 80 - 100% Sideshift, fork positioner, 3rd valve, 4th valve, front work lights, roof cover, front windscreen, load guard, twin tires.

Condition: used, Year of construction: 2017, operating hours: 4,505 h, load capacity: 2,000 kg, lifting height: 4,500,000 mm, construction height: 2,170,000 mm, power: 33 kW (44.87 HP), gearing type: automatic, overall weight: 5,170 kg, empty load weight: 3,170 kg, total height: 22,500 mm, color: orange, first registration: 07/2017, maximum load weight: 2,000 kg, number of seats: 1, driver cabin: other, wheelbase: 1,400 mm, Equipment: cabin, front guard, head guard, sideshift, * German vehicle * Condition see photos * Completely new tires * only 4505 operating hours * TYPE: G20SC-5 LP Gjdpfx Asvhpr Hoh Esbw * 1.565 kg lifting capacity at 500 mm heavy load distance * 905 kg lifting capacity at 1,700 mm heavy load distance * Lifting height: 4,500 mm * Load capacity: 2,000 kg * Mast type Doosan FFT with load protection grid * Fork length: 1,700 mm * Fork width: 80 mm * Integrated sideshift with hydraulic fork adjustment * Adjustment range up to 850 mm * 2.4 L LPG engine (HMC) * Automatic powershift transmission * Oil-cooled multi-disc brake * Full cab with protective roof * Driver's seat with restraint system * Windshield wiper * Towing device * Clear instruments * Ergonomic driver's seat * Turning radius: 2,050 mm * OSS (safety shutdown system) * Maximum speed 18 Km/h * Unladen weight: 3,170 kg * Tare weight: 5,170 kg If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: used, Year of construction: 2017, operating hours: 24,500 h, Serial number: DIN0DA30LH074xxxx Please contact ATS Norway for more information Gbodpsw Ruyxjfx Ah Esw Please provide reference number upon request: 21134 Specifications: 2017 model Approx. 6870 hours Approx. 24,500 km Power: 270 kW (375 hp) Tires (see photos) Road registered (white plates) High tailgate Central lubrication Length: 955 cm Width: 299 cm Wheelbase: 411 / 177 cm Curb weight: 24,300 kg Max payload: 27,125 kg 6x6 Reversing camera LED work lights Radio/CD Air conditioning Description: 2017 Doosan DA30 articulated dump truck for sale.Equipped with central lubrication, high tailgate, and reversing camera.Ready for quick delivery. Hours: 24500 Own weight: 24300 Model: DA 30 Dumper

Condition: used, fuel type: diesel, color: orange, lifting height: 4,050 mm, Year of construction: 2015, operating hours: 6,470 h, Year of manufacture: 2015 Empty weight: 6.000 kg Gbjdpoxb Ayasfx Ah Eew Dimensions (LxBxH): 567 x 198 x 255 cm Engine type: Yanmar Yanmar 4TNV94L

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 530 h, load capacity: 3,000 kg, lifting height: 4,700 mm, free lift: 1,400 mm, fuel type: diesel, mast type: triplex, construction height: 2,145 mm, power: 42 kW (57.10 HP), fork carriage width: 1,190 mm, fork length: 1,200 mm, empty load weight: 4,850 kg, drive type: Diesel, Diesel forklift Load center: 500 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Torque converter Speed class: 20 Technical condition: very good Front tires type: Superelastic Front tires condition: 80 - 100% Rear tires type: Superelastic Rear tires condition: 80 - 100% Sideshift, 3rd valve, 4th valve, half-cabin, full free lift, twin tires, Gbedpfsukxcvjx Ah Esw

Condition: used, Year of construction: 2016, operating hours: 9,085 h, Hydraulic S. W. system from 2018, Rototilt R8 suitable for units from 28,000 to 32,000 kg, grab and hammer function, boom approx. 3,000 mm, air conditioning, surcharge for trenching bucket. Vehicle may have advertising stickers and/or lettering applied. Price without Rototilt and without bucket!! Our offer generally does not include a new roadworthiness inspection (TÜV). If a new TÜV inspection is required, we will be happy to provide you with an offer from our partner workshops! Vehicle may have advertising stickers and/or lettering applied. Our general delivery and payment conditions apply. Gedpfx Ahevy Rido Eobw We are happy to provide a financing or leasing offer for this item. Please contact us!

Year of construction: 2020, condition: ready for operation (used), General Data Measurements width 1785 mm Measurements depth 3035 mm Measurements height 1715 mm Machine weight 4050 kg Gbjdpfjxnr Nksx Ah Eow Control Unit Brand FANUC Main Drive Spindle speed range 3500 rpm Spindle motor power 15/11 kW Spindle bore 86 mm Movement X-Axis Movement 255 mm X-Axis Rapid Traverse 24 m/min Z-Axis Movement 790 mm Z-Axis Rapid Traverse 30 m/min Workpiece Workpiece drm over bed 651 mm Additional Equipment Coolant tank capacity: 160 liters Tail Stock Tailstock travel: 775 mm Tailstock quill diameter: 80 mm Tailstock quill travel: 120 mm Morse taper: MT4 This DOOSAN LYNX 300M was manufactured in 2020. It features a maximum swing over bed of 651 mm, turning diameter of 461 mm, and a turning length of 712 mm. The main spindle supports speeds up to 3,500 rpm with a spindle bore of 86 mm. It includes a 12-position turret and rapid traverse rates of 24/30 m/min in X- & Z-axes and Milling function with the C axis. Consider the opportunity to buy this DOOSAN LYNX 300M horizontal turning machine. Contact us for more information. Located in Denmark. Application Types Turning

Condition: excellent (used), Year of construction: 2011, FANUC 32i A CNC Control Spindle Hours: 8,541h Technical Details Travel over Slide: 900 mm Turning Length: 3,200 mm Travel over Bed: 1,030 mm Standard Turning Diameter: 750 mm Spindle Bore: 110 mm X Stroke: 471 mm Godpfxewqpn Ej Ah Esbw Z Stroke: 2,100 mm Rapid Feed - Longitudinal/Transverse: 15/20 m/min Spindle Speed: 3,000 rpm Spindle Motor: 45 kW Turret: 12/6 BMT 85 Electric Motor: Tools: 7.5/5.7 kW Driven Speed: Tools: 3,000 rpm Total Power Requirement: 62.2 kVA Machine Weight: Approx. 22 t Dimensions: 7,357 x 2,710 x 2590 mm Accessories: 12-position turret for driven tools Hydraulic tailstock Sandvik Capto C6 tool holders – 4 pcs Hydraulic chuck Ø630 mm SMW Autoblock Hydraulic steady rest (min. 110 mm, max. 530 mm)

Condition: used, Year of construction: 2013, operating hours: 8,935 h, Serial number: 4084xxxx Please contact ATS Norway for more information Please provide reference number upon request: 16505 - Is certified or delivered certified - 8,935 hours - 112,400 km - Good tires - 6-wheel drive - Good box - Central grease - Webasto - Reversing camera - Extra light Gbsdpjvg Nq Hsfx Ah Esw - 360 kW motor - Radio/cd - 2 seats - Delivery by agreement Dump trucks have a history that the owner can confirm is in his possession. Low hours and seems to be well taken care of Can be delivered by agreement Hours: 8935

Condition: used, lifting height: 4,650 mm, Year of construction: 2017, operating hours: 6,610 h, Year of manufacture: 2017 Empty weight: 8.500 kg Digging depth: 4.175 m Gbjdpjxqfhljfx Ah Eow

Condition: used, Year of construction: 2007, operating hours: 21,000 h, functionality: fully functional, spindle speed (min.): 60 rpm, spindle speed (max.): 6,000 rpm, position of the milling head: Horizontal, feed length X-axis: 2,000 mm, feed length Y-axis: 1,500 mm, feed length Z-axis: 1,250 mm, workpiece weight (max.): 2,000 kg, total height: 1,250 mm, Table size 1000x1000 mm Gjdoxvtxcjpfx Ah Ejbw 1 Degree pisition Max. 2000 kg loading Fanuc 18iMB ATC 90 pieces Iso 50 CTS 20 bar

Year of construction: 2014, condition: ready for operation (used), Control Unit Brand FANUC Model 31i-MODEL B Main Drive Spindle speed range 5000 Spindle motor power 18.5 / 22 kW Tool taper A2-6 Gjdpoxn U D Rjfx Ah Ejbw Number of axis 9 Movement X-Axis Movement 165 mm Y-Axis Movement 100 mm Z-Axis Movement 770 mm Additional Equipment LNS bar interface the robot is not included Control Unit Brand FANUC Model 31i-MODEL B Main Drive Spindle speed range 5000 Spindle motor power 18.5 / 22 kW Tool taper A2-6 Number of axis 9 Movement X-Axis Movement 165 mm Y-Axis Movement 100 mm Z-Axis Movement 770 mm Additional Equipment LNS bar interface the robot is not included This 9-axis DOOSAN PUMA TT 1800 SY was manufactured in 2014, offering advanced capabilities for horizontal turning. Ideal for complex machining tasks, this machine ensures precision and efficiency. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA TT 1800 SY machine we have for sale. Contact us for more information. Application Types Turning

Condition: used, power: 127 kW (172.67 HP), fuel tank capacity: 255 l, color: orange, lifting height: 2,750 mm, Year of construction: 2014, operating hours: 5,420 h, Year of manufacture: 2014 Empty weight: 14.400 kg Dimensions (LxBxH): 772 x 264 x 328 cm Gbjdpoxqfciofx Ah Eew Engine type: Doosan Doosan DL06K Tier IIIB Bucket volume: 2.5 m^3

Condition: ready for operation (used), Year of construction: 2012, operating hours: 37,513 h, General Data Machine weight 9500 kg Main Drive Tool taper BT40 Number of axis 3 Movement X-Axis Movement 762 mm Gbsdpfoxg Ui Dsx Ah Eew Y-Axis Movement 516 mm Z-Axis Movement 570 mm Tools Number of index 40 This 3-axis DOOSAN VC 510 was manufactured in 2012. It features a twin pallet vertical machining centre with a table size of 2 x 860 x 570mm, a maximum workpiece height of 520mm, and a spindle speed of 10,000rpm. It includes a 40 tool ATC, X-axis travel of 762mm, Y-axis travel of 516mm, and Z-axis travel of 570mm. Consider the opportunity to buy this DOOSAN VC 510 vertical machining centre. Contact us for more information. Application Types Milling

Condition: used, color: orange, lifting height: 3,410 mm, Year of construction: 2019, operating hours: 3,030 h, Year of manufacture: 2019 Empty weight: 3.500 kg Dimensions (LxBxH): 465 x 170 x 252 cm Godpfx Ahoxqfb Ej Ejbw Digging depth: 4.88 m

Condition: ready for operation (used), Year of construction: 2013, operating hours: 29,083 h, General Data Machine weight 9500kg Control Unit Brand FANUC Main Drive Spindle speed range 10000 Tool taper BT40 Number of axis 3 Movement X-Axis Movement 762 mm Y-Axis Movement 570 mm Z-Axis Movement 570 mm This 3-axis DOOSAN VC-510 was manufactured in 2013. It features a twin pallet vertical machining center with a table size of 2 x 860 x 570mm, a maximum workpiece height of 520mm, and a spindle speed of 10,000rpm. The machine includes a 40 tool ATC, X-axis travel of 762mm, Y-axis travel of 516mm, and Z-axis travel of 570mm. Consider the opportunity to buy this DOOSAN VC-510 vertical machining center. Contact us for more information. Gbjdpfx Ahsxg Ui Re Esw Application Types Milling