Used Okuma Lb 15 Ii for sale (226)

Condition: good (used), Year of construction: 1997, Technically in good condition and functional. Year of manufacture 1997. Godpfown Dbnox Aa Aebk Max. turning diameter 250 mm. Max. diameter over bed 530 mm. Max. turning length 500 mm. Length x Width x Height approx. 3315 mm, 1895 mm, 1900 mm. Machine weight approx. 6 tons.

Condition: used, OKUMA LB 10 II M is a CNC turning lathe, engineered for precision, high accuracy and reliability. Capacities: swing over cross‑slide 340 mm, over bed 480 mm, max turning Ø 170 mm, spindle hole 51 mm, max length 300 mm, bar passage 42 mm; travels Z350/X150 mm; rapid Z20/X15 m/min. Turret 12 pos., 12 driven tools; C‑axis res. 0.01°; spindle 50–6000 t/min; voltage 3x400 V 50 Hz; weight ~3400 kg; footprint 2000×1640×1780 mm. Accessories: lamp, coolant system, bar feeder, chip conveyor. Enables tight tolerances; suitable for automotive, aerospace, medical, watchmaking and precision machine tool applications. Gbedpfxsyxnx Es Aa Ajk

Condition: good (used), Parts shown by hand not come. Gbsdsyb R Erepfx Aa Aok

Condition: used, functionality: fully functional, The machine has not been in operation for about one year. It is not connected to the power supply. The machine is available for inspection upon request. – CNC control: OSP 5000L-G CNC system (German language) – Data transmission: RS232 – Tool turret: 12-position BOLT ON type – Chuck: 250 mm – Spindle: 70-3800 rpm (11 kW, 30 min; 7.5 kW – continuous operation) – Non-through spindle – Spindle bore diameter: 75 mm (at a depth of 70 mm, measured from the face of the chuck and without jaws) – Spindle bore diameter: 28 mm (at a depth of 200 mm, measured from the face of the chuck and without jaws) – X axis travel: 400 x 0.001 mm – Z axis travel: 500 x 0.001 mm – XZ cutting speed: 0.01-1000 mm/rev Gedpfxsyy Upae Aa Aobk – XZ feed rate: 12,000 mm/min – Power supply: 3 x 400V – Machine rated power: 21 kVA – Maximum load current: 36A – Machine dimensions (width x depth x height): 2.9 m (3.9 m with chip conveyor) x 1.8 m x 1.72 m – Machine weight: 4500 kg

Condition: ready for operation (used), Year of construction: 2022, travel distance X-axis: 260 mm, travel distance Y-axis: 115 mm, overall weight: 6,850 kg, controller manufacturer: OKUMA, controller model: OSP-P300LA, number of axes: 5, This 3-axis Okuma LB 3000 EX II was manufactured in 2022, featuring a robust horizontal turning capability. It includes an Iemca KID 80 bar feeder, a 250 mm SMW chuck, and a 170 mm Kitagawa chuck. With a main spindle motor power of 22 kW and rotational speeds up to 6000 rpm, it ensures efficient turning operations. If you are looking to get high-quality turning capabilities consider the Okuma LB 3000 EX II machine we have for sale. Contact us for more information. • Distance between spindle noses: 1085 mm • Maximum turning diameter: 340 mm • Bar capacity through main spindle draw tube: 80 mm • Sub spindle bore: 63 mm • Bar capacity through sub spindle draw tube: 52 mm • Rotational speed of driven tools: 45–6000 rpm Additional equipment • Iemca KID 80/16 Plus bar feeder (2022) — KID 80 included • 250 mm SMW chuck on the main spindle • 170 mm Kitagawa chuck on the sub spindle • 6 sets of soft jaws • 4 straight driven tool holders • 4 angled driven tool holders • 2 double turning tool holders • 4 boring bar holders • 8 standard turning tool holders • 8 straight ER holders with about 30 ER collets Gbedpfx Aaox D Rvne Aok

Year of construction: 1995, condition: ready for operation (used), General Data Measurements height 11700 mm Main Drive Number of axis 2 Gbodpfx Ajx D Du Rja Aok Spindle Speed 3800 RPM Spindle motor power 26 kW Tool taper VDI 40 Movement X-Axis Movement 230 mm This Okuma LB 25 II was manufactured in 1995. It features a maximum turning diameter of 400 mm, turning length of 1,250 mm, and a swing diameter of 550 mm. The spindle supports speeds up to 3,800 rpm with a power of 26 kW. It includes a 12 station tool turret and a tailstock with an MT5 taper. Consider the opportunity to buy this Okuma LB 25 II horizontal turning machine. Contact us for more information. Application Types Turning

Year of construction: 1998, condition: ready for operation (used), General Data Measurements width 2620 mm Measurements depth 4865 mm Machine weight 11700 kg Control Unit Brand OKUMA Model n/a Main Drive Spindle speed range 3500 Tool taper ASA 8 Number of axis 2 Movement X-Axis Movement 230 mm Z-Axis Movement 670 mm Turret Tool taper VDI 40 This 3-axis Okuma LB 25 II-M was manufactured in 1998. A robust horizontal turning machine featuring an Okuma OSP 5020L control, it offers a spindle speed of 3,500 rpm and a 12-position tool turret. It handles a max workable diameter of Ø 420 mm and lengths up to 1,250 mm. Consider the opportunity to buy this Okuma LB 25 II-M horizontal turning machine. Contact us for more information about this machine. Application Types Gedpfx Aasx D R Rfs Aobk Turning

Condition: ready for operation (used), Three Okuma CNC horizontal lathes are available. 1) Okuma LB 15 M. 2) Okuma LB 15. 3) Okuma LB 15 W. The Okuma LB 15 W is defective. On-site inspection is possible. Individual sale possible. Gsdpfx Aswmdv Nea Ajbk

Condition: excellent (used), Year of construction: 2010, turning length: 995 mm, spindle bore: 80 mm, Max. turning Ø: 530mm X-Axis: 260mm Z-Axis: 995mm Spindle bore: 80mm Speedrange: 5000Rpm Spindle power: 22kW Subspindle speeds:6000Rpm Subspindle bore: 62mm Subspindle power:11kW ATC / revolver: 12 Speed live tools:6000Rpm Tool eye: yes Hours: 2800H Length: 3000mm Width: 1800mm Gsdpfsx I Nbtsx Aa Aebk Height: 1900mm Weight: 6350kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: repair required (used), turning length: 400 mm, spindle bore: 75 mm, spindle speed (max.): 3,800 rpm, General information about the machine We are offering a used lathe from the manufacturer Okuma. The machine is offered as a spare parts carrier. The machine is running but not all functions can be guaranteed. The keys for operation are missing. The machine is in our warehouse and can be inspected under power Gbodpfx Ajugmzkoa Aek Technical data - CNC control: OSP 5000L-G CNC system (German) - Tool turret: 12 positions - Lathe chuck: 250 mm - Spindle: 70-3800 rpm (11 kW, 30 min; 7.5 kW - continuous operation) - Spindle bore diameter: 75 mm - X-axis travel: 400 x 0.001 mm - Z-axis travel: 500 x 0.001 mm - Cutting speed XZ: 0.01-1000 mm / U - Rapid traverse up to: 12,000 mm / min. - Power supply: 380V - Rated power of the machine: 21 kVA - Maximum load current: 36A - Machine dimensions (width x depth x height): 3.9 m (with chip conveyor) x 1.8 x 1.8 m - Machine weight: 4500 kg

Condition: excellent (used), Year of construction: 2017, CNC Lathe Okuma LB 4000 EX II – M C750 Control: OSP-P300LA Year of manufacture: 2017 Internal machine no.: 22 Gsdpfx Aoyk Uimoa Aebk Turning length: 750 mm Turning diameter: 430 mm Swing diameter over bed: Ø 670 mm Swing diameter over carriage: Ø 480 mm Spindle speed: 42 – 4,200 rpm Tool turret: V12 (all stations driven) Equipment: Chip conveyor Touch setter OneTouch IGF 3-jaw chuck Tailstock

Condition: excellent (used), Year of construction: 2008, CNC Lathe Okuma LB 4000 EX – MY C750 Control: OSP-P200L Year of manufacture: 2008 Internal machine number: 21 Gbedpfx Aeylkgqoa Ask Turning length: 750 mm Turning diameter: 430 mm Swing diameter over bed: Ø 670 mm Swing diameter over carriage: Ø 480 mm Spindle speed: 42 – 4,200 rpm Tool turret V12 (all stations driven) Equipment: One touch IGF Chip conveyor Touchsetter 3-jaw chuck (Kitagawa B212)

Condition: excellent (used), Year of construction: 2019, CNC Lathe Okuma LB 3000 EX II-MYW 800 Control: OSP-300LA Year of manufacture: 2019 Internal machine no.: 20 Distance between centers or spindle noses: 1085 mm Swing diameter over cross slide / bed: 340 / 580 mm X-axis travel: 260 mm Y-axis travel: 115 mm Z-axis travel: 1,010 mm C-axis travel: 360 mm W-axis travel: 895 mm Gedpoyk Tbhsfx Aa Aebk Main spindle speed: 45 - 5,000 rpm Sub spindle speed: 45 - 6,000 rpm Mounting: BMT 60 Tool turret: V12 (driven) Equipment: Chip conveyor One touch IGF Touch setter Main spindle Hainbuch Ø 65 mm Sub spindle SMW Autoblok KNCS-N 170-43 Coolant system HMF-980 with paper band filter Bar feeder / robotics interface prepared

Condition: excellent (used), Year of construction: 2018, CNC Lathe Okuma LB 3000 EX II Control: OSP-P300LA Year of manufacture: 2018 Internal machine no.: 19 Turning length: 500 mm Turning diameter: 340 mm Swing diameter over bed: 530 mm Spindle speed: 45 – 5,000 rpm Tool turret: 12 stations (driven) Tool holder: BMT 65 Gedpfjylhmujx Aa Asbk Spindle bore: Ø 72 mm Equipment: Chip conveyor Parts catcher Touch setter Programmable sub-spindle One Touch IGF 3-jaw power chuck Kitagawa Various driven and static tools

Condition: excellent (used), Year of construction: 2013, CNC Lathe Okuma LB 3000 EX II-M C1000 Control: OSP-300L Year of manufacture: 2013 Internal machine no.: 18 Turning length: 1,000 mm Turning diameter: 340 mm Swing diameter over bed: 580 mm Godpfjylh Sdjx Aa Aobk Spindle speed: 45 – 5,000 rpm Tool turret: 12 stations (driven) Tool holder: VDI 40 Equipment: Chip conveyor Touchsetter OneTouch IGF NC tailstock 3-jaw power chuck Forkardt 3QLC/K250

Condition: excellent (used), Year of construction: 2018, turning length: 565 mm, spindle bore: 80 mm, travel distance X-axis: 260 mm, travel distance Z-axis: 565 mm, spindle motor power: 22,000 W, rotational speed (max.): 6,000 rpm, total height: 1,824 mm, total length: 2,800 mm, total width: 1,790 mm, CNC Lathe with c-axis Okuma - LB3000EX-II MACH-ID 9471 Make: Okuma Type: LB3000EX-II Control: OSP-P300LA Year: 2018 Tooling package with Tool Holders Axial driven live tools holders Radial driven live tools holders Kitagawa B210 3 Power Chuck Max. turning Ø: 580mm X-Axis: 260mm Z-Axis: 565mm Spindle bore: 80mm Speedrange: 5000Rpm Spindle power: 22kW Godoywurpjpfx Aa Ajbk ATC / revolver: 12 Speed live tools:6000Rpm Chip conveyor: Yes Tool eye: Yes Hours: 4566H Pinole taper: 5Mk Length: 2800mm Width: 1790mm Height: 1824mm Weight: 4350kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 5,000 rpm, travel distance Y-axis: 120 mm, spindle motor power: 22,000 W, number of axes: 4, This 4-axis Okuma LB 3000 EXII was manufactured in 2022. It features a spindle speed of 5,000 rpm and a spindle power of 22 kW. The machine includes a 12-position motorized turret and a Y-axis travel of 120 mm. If you are looking to get high-quality turning capabilities, consider the Okuma LB 3000 EXII horizontal turning machine we have for sale. Contact us for further details. Gedpfx Aoyq Ngmsa Aobk • Control: OSP P 300LA • Spindle: ASA 6" nose (bore 80 mm, without drawbar); bar capacity 52 mm (Kitagawa SR1453 cylinder); electric spindle orientation • Axes: Y-axis travel 120 mm ; C-axis rotation 360° (0.001° increment) • Turret: 12-position radial, motorized; turret motor 6,000 rpm, 7.1 kW • Tailstock: CM5; 500 kgf thrust; rotating tip • Pedals: Separate for spindle and tailstock • High-pressure coolant pump: 0.8 kW; 6 bar; 20 l/min • Tool presetting: Manual • Programming: Conversational IGF

Condition: good (used), Year of construction: 2014, Description: Gbjdpoyycb Rjfx Aa Ask The machine is in good technical condition, with the possibility of a test run upon prior agreement. Maximum swing diameter: 480 mm (approximate to the current configuration of the parts pick-off gripper) Maximum machined diameter: 340 mm Maximum turning length: 785 mm Collet chuck + 10" hydraulic chuck B210-A06-01, 3 sets of soft jaws (Schunk KM-WBL 103), 1 set of hard jaws (Schunk SHB-J 100), hydraulic through cylinder SS 1770, draw tube Main spindle Spindle nose: JIS A2-6, bore diameter 80 mm, integrated motor Speed range: 45 - 5,000 rpm Power/Continuous operation: 22 kW / 15 kW Continuously controlled C-axis, 360° with 0.001° increment Sub spindle Speed range: 50 – 6,000 rpm Power/Continuous operation: 11 kW / 7.5 kW Spindle nose diameter: 140 mm, bore diameter 62 mm, integrated motor Continuously controlled C-axis, 360° with 0.001° increment Collet chuck + 6" hydraulic chuck B206-01, 3 sets of soft jaws (Schunk KM-WBL 62), hydraulic through cylinder SS1243, draw tube Sub spindle travel – NC W axis, stroke for W450: 595 mm Spring-loaded workpiece ejector from the sub spindle W-axis overload monitoring (drive torque) Center support (tailstock) clamping in the sub spindle Turret head Number of tool positions: 12, static and driven, BMT60 (not VDI) Tool clamping (internal): 25 x 25 mm Tool clamping (external): diameter 40 mm Driven tools Drive power: 7.1 / 4.1 kW Speed range: 45 – 6,000 rpm Rapid traverse speeds Rapid feed in X and Z axes: 25 / 30 m/min Rapid feed in C axis: 200 rpm

Condition: ready for operation (used), Okuma Opus 5000 II Main Board II A E4809-045-086-A / 1911-1509-44-90, serial number as per photo, used, normal signs of wear, 100% functional, scope of delivery as per photos Gbjdpei Eca Djfx Aa Aok

Year of construction: 2018, operating hours: 1,256 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 2189, OKUMA LB3000EX-II - is particularly suitable for universal turned parts and complete machining of complex workpieces thanks to generous flatbed guides and the high-torque drives ensure high precision and continuous accuracy TECHNICAL DETAILS turning diameter over bed: 580 mm Machinable turning diameter: 340 mm workpiece length: 950 mm traverse X / Z / Y: 230 / 510 / 120 (+70/-50) mm C axis: 360 / 0.001 ° Control: OKUMA OSP-P300LA rapid traverse X / Z / Y: 25 / 30 / 12,5 m/min riveting stroke: 1015 mm Gjdsnt T Auopfx Aa Asbk spindle speed: 4200 rpm spindle end piece: JIS A2-8 spindle bore: 91 mm diameter spindle bearing: 140 mm tool holder: M-V12 with 12 places tool size: 25 x 25 mm tool diameter: 40 mm tool change time: 0,1 s Tool speed: 45 - 6000 rpm Operating hours: 1.256 h Control on: 1.660 h MACHINE DETAILS dimensions L x W x H: 3420 x 2041 x 2444 mm weight: 6600 kg Supply voltage: 400 V, 3 phases, 50 Hz Power drawn: 38,9 kVA Spindle power (30 min/continuous): 30 / 22 kW Spindle torque: (30 min/continuous): 700 / 512 Nm Tool power (25 min/continuous): 7.1 / 4.1 kW Tool torque (25 min/continuous): 40.4 / 23.4 Nm Note: The WTOH hobbing tool holder (see document in the appendix) is not part of the scope of delivery.

Condition: excellent (used), Year of construction: 2019, operating hours: 2,044 h, functionality: fully functional, machine/vehicle number: 223697, turning length: 950 mm, turning diameter: 340 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 1,010 mm, rotational speed (max.): 5,000 rpm, Machine with Big-Bore Spindle TECHNICAL DETAILS Spindle speed: 45 to 4,200 rpm Spindle motor: 30/22 kW Gbsdpfx Aownqdija Aok Spindle mount: JIS A2-8 Spindle bore: ø91 mm Axes and Travel Turning length: 950 mm Turning diameter: 340 mm C-axis control: 360° at 0.001° increments X-axis travel: 260 mm Y-axis travel: 120 mm; +70 mm / −50 mm Z-axis travel: 1,010 mm Tool Turret Turret type: V12, radial, for L and M tools Tool holder mount: VDI Speed: 45 to 6,000 rpm Rotary tool motor: VAC 7.1/4.1 kW Control CNC control: OSP-P300LA with 15" touch panel Pitch error compensation: X-/Y-/Z-axes Workpiece ejection detection: available Smart Interface: included API Library 2: activated Virus Protection System - OSP-VPS: available Software Functions One Touch IGF Advanced M-E Kit: standard Optional IGF Advanced M-D Kit: available Multitasking coordinate conversion: available Profile generation: available Cycle time inspection and reduction: available Hi-Cut Pro: available Load monitoring, spindle & feed axes: available NC operation monitoring: available Spindle speed control: variable Y-axis turning: available Helical milling for MY machine: X/Y surface, Y/Z surface Cooling and Lubrication Coolant pump: 0.25 kW Coolant tank: L-type, replacing I-type High-pressure coolant pump: 0.8 kW Lubrication monitoring: A-1 incl. hydraulic pressure monitoring Dimensions and Construction CE marking and EMC: available IEC standard compliance: available Power supply CE-compliant: adapted to local standards Guideway extension for steady rests: available TAS-C: available Chip and Coolant Management Chip tray: side extraction Chip conveyor H-type: side, CE-compliant Fully enclosed with coolant protection: available MACHINE DETAILS Height: 2,444 mm Footprint: 3,420 x 2,041 mm Weight: 6,600 kg

Condition: ready for operation (used), Year of construction: 1997, spindle speed (max.): 6,000 rpm, travel distance X-axis: 240 mm, travel distance Z-axis: 240 mm, spindle motor power: 15,000 W, number of axes: 3, This 3-axis Okuma LB15i-M was manufactured in 1997. It features a spindle speed of up to 6000 rpm and a spindle power of approximately 15 kW. The machine includes 5 motorized front tools and 2 radial tools, providing versatile machining capabilities. If you are looking to get high-quality turning capabilities, consider the Okuma LB15i-M horizontal turning machine we have for sale. Contact us for further details. • Turret positions: 12 • Driven tools: Yes (5 front + 2 radial) • Tailstock: available (to be enabled) • Distance between centers: 500–1000 mm • Spindle nose: JIS A2-6 Technical Specification Gbodsywu Siopfx Aa Aok Counter Spindle No Driven Tools Yes

Condition: used, Year of construction: 2014, OKUMA - LB3000 EXII - 2014 - control system OSP-P300L CNC with 15" color touch screen - Power on time: 65,458 h - as of 18.03.2026 NC time in operation: 36,054 h - spindle rotation time: 19,533 h - time in cut 16,582 h - power consumption 33.1 kVA Technical data - max. rotating diameter 480 mm - max. machined diameter 340 mm - max. turning length 785 mm - collet + 10“ hydraulic chuck B210-A06-01, 3x soft jaws (Schunk KM-WBL 103) - 1x hard jaws (Schunk SHB-J 100) - hydraulic through-cylinder SS 1770, draw tube Main spindle - spindle with JIS A2-6 end, bore dia. 80 mm, integrated motor - speed ​​range 45 - 5,000 rpm - 22 kW/15 kW - continuously controlled C-axis, 3600 with 0.001° increments Sub-spindle - speed ​​range 50 - 6,000 rpm - 11 kW/7.5 kW - spindle with end dia. 14O mm, bore dia. 62 mm, integrated motor - continuously controlled C-axis, 360° with 0.001° increments - collet + 6“ hydraulic chuck B206-01, 3 x set of soft jaws (Schunk KM-WBL 62) - hydraulic through-cylinder SS1243, draw tube - travel of the secondary spindle - NC axis W stroke for W450: 595mm - spring-loaded piece ejector from the counter spindle - overload monitoring of the W axis (drive torque) Clamping of the center (tailstock) in the secondary spindle Turret head - number of tool positions 12, fixed and driven BMT60 (not VDI) - tool clamping in. 25 x 25 mm - tool clamping out. dia. 40 mm Driven tools - drive power 7.1/4.1 kW - speed ​​range 45 – 6,000 min-1 Travel speeds - rapid traverse in X and Z axes 25/30 m/min. - rapid traverse in C axis 200 rpm. Gjdpfxoyzkn Uj Aa Asbk Travels - X axis 260 mm - Z axis 510 mm - Y axis 115 mm (+70 mm / -45 mm) Machine data - width 3330 mm – without feeder and conveyor - depth 1800 mm - height 2250 mm - machine weight 5,250 kg Accessories: OSP-P300L Advanced One Touch CF-M-E set containing: - coordinate transformation function - profile generation function - advanced One Touch IGF - 3D machining process simulation - machining time overrun control - load monitoring (spindle, feed axes) - NC operation monitoring (including piece counting) - cycle time reduction function - Hi-Cut Pro function - spindle speed control function - high-pressure coolant, max. 20 bar, max. 50l/min - ILS material feeder type MUK 7012, with bar magazine 6-70 mm/1250 mm, year 05/2014, manufacturer Kurt Breuning – IRCO Maschinenbau GmbH, Steinenbronn - FILTERMIST FX4002 extraction Machine equipment: - collet holder: SMW AUTOBLOK: KSZ-DZN-065-A06 201342 (currently on the main spindle) - collet dia.(mm): 6-33, 34-36, 38-42, 44-46, 48, 50-51, 53, 55, 57, 60, 64-65 - collet with groove dia.(mm) 55-60-65 - collet holder: SMW AUTOBLOK: KSZ-DZN-042 Z140 205073 (currently on the secondary spindle) - collets dia.(mm): 6-28, 30-32, 34-36, 39-41 Holders: - axial holder - 5x - knife holder - 5x - holder on the blade - 2X - front double-sided chaser - 3X - transverse chaser - 3X - reducing insert tube (production from the meter) - reduction - silon dia.(mm): 12-14-15.5-17-20-22-24-26-28-30-31-34-36-38-40-42-44-47-50-52

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, type of input current: three-phase, We are offering this ready-to-use Okuma LB15 CNC lathe, year of manufacture 1989. Noted defects: The seal on the Plexiglas door should be replaced over time. The machine is still in operation and can therefore be inspected and tested on site. Gsdpfx Aaoyw Hnio Asbk Manufacturer: Okuma Model: LB15 Year of manufacture: 1989 Mains voltage: 380 V Number of phases: 3 Rated power: 21 kVA Frequency: 50 Hz Total rated current: 36 A Maximum motor current: 28 A Breaking capacity: 7.5 kA Circuit diagram no.: W5000-118-068 Serial number: 5813 If you have any questions or need further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, turning diameter over cross slide: 410 mm, turning length: 515 mm, turning diameter: 520 mm, spindle bore: 66 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 250 mm, travel distance Z-axis: 565 mm, overall weight: 4,400 kg, One-Touch IGF (soru-cevap diyalog programlama özelliği var) 2024 model OKUMA LB3000EXII CNC TORNA KONTROL OSP-P300LA KATALOGUNU EKLEDİK İNCELİYEBİLİRSİNİZ. 2 EKSEN ÇEVİRME ÇAPI 520 MM İŞLEME ÇAPI 410mm İŞLEME BOYU 515 mm FENERMİLİ DELİK ÇAPI 66 mm PUNTA KONİGİ MT-5 PROGRAMLI PUNTA VAR 5000 DEVİR AGIRLIGI 4400 KĞ Gbodpfx Aajywhfij Aek Almanya ve Fransa' da referans verebiliriz.