Used Counter Bracket for sale (3,701)

Condition: good (used), Year of construction: 2020, operating hours: 3,015 h, load capacity: 2,000 kg, lifting height: 1,660 mm, fuel type: electric, mast type: duplex, construction height: 1,315 mm, empty load weight: 1,200 kg, mileage: 3,015 km, This Still electric stacker from 2020 is in good condition;The capacity is 2,000 kg;The stacker lifts to a height of 1,660 mm;Drive-through height 1,315 mm;Equipped with an INITIAL LIFT and therefore ideal on uneven floors;Only 3,015 hours on the counter;The battery from 2020 is equipped with an automatic filling system and an external charger Make an appointment for a test drive.Video to followFINANCIAL LEASE POSSIBLE, ask for the conditions Calculation is subject to credit acceptance and interest and rate changes, final calculation via our external partner* Hfjdowhld Repfx Ak Usn

Condition: used, machine/vehicle number: 55191-08, equipped with a 2-axis digital display, manufactured by HEIDENHAIN, with an angular milling head, 2 indexing tables, an additional clamping table, counter support, 3-jaw chuck, various change gears, machine light, and a steel transport cart. Hjdez Nhndjpfx Ak Usfn

Condition: used, Year of construction: 2017, operating hours: 3,500 h, Equipment: Base package AK635 Central axle trailer chassis with 3 axles, 80 km/h road approval Brake system incl. ABS and lighting according to EC directive Tyres 385/65 R22.5 Permissible total weight 25,000 kg Hydraulically adjustable support leg Splash guards (inner and side fenders) Mercedes-Benz diesel engine OM502LA, 440 kW at 2,000 rpm, compliant with EUROMOT IIIB emission standard Load-dependent feed control including automatic scraper floor reversal Separate drives for feed roller and scraper floor (twin drive) Fuel tank 750 litres Feed roller: length 1,690 mm, diameter 510 mm, with mounted toothed segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: flail tip “Streusel” Additional hydraulic connection 20 l/min Centrally arranged wear strips Electric pump for operating cylinder functions (e.g. raise/lower support leg and open/close rear basket, fold/unfold rear conveyor, release drive) when the engine is off 24 V electrical control Separate control box at the rear of the machine Hfsdpfey D Nktjx Ak Ujn Hydraulically folding fine shredding basket with flap (mesh size from 30 - 280 mm, gradation on request) Rear conveyor: belt length 6,150 mm, belt width 1,500 mm, discharge height 4,500 mm, hydraulically foldable, with anti-magnetic centre section Lower conveyor: belt length 1,700 mm, belt width 1,400 mm Scraper floor with 34 slats Radio remote control incl. transmitter, receiver, 230 V charging station, 12/24 V charging cable, transmitter bracket. The following functions can be controlled: engine stop, engine speed +/-, material feed: on/off/reverse, fine shredding basket: open, rear/lower conveyor: on/off, feed roller: reverse, scraper floor stop/reverse/forward, support leg: raise/lower, drive preparation: stop/reverse/forward/release Drive preparation Acoustic start-up warning Paint finish: RAL2011 deep orange Fine shredding basket 60 mm Optional equipment: Impact plate with impact bar Overband magnet -Neodymium- Frame for overband magnet Smooth feed roller Scraper floor with cleaning holes Delivery date to be agreed

Condition: used, Year of construction: 2015, functionality: fully functional, NAKAMURA NTJ-100, CNC turning and milling center with FANUC 31i-B control • C-axis on the left spindle • C-axis on the right spindle • Milling drive on the upper turret • Milling drive on the lower turret • B-axis on the upper turret +/-91° • Y-axis +/- 40 mm on the upper turret • Y-axis +/- 32.5 mm on the lower turret • Bar capacity left 42mm A2-5, 6000 rpm • Bar capacity right 42 mm A2-5, 6000 rpm • 12/24 + 6 stations under 45° turret, top • 12/24 stations turret, bottom • 90° inclined bed • Interface for bar loader magazine, Hommel • Air blow-out, right spindle • Drive power left, FANUC AC11/7.5kW • Drive power right, FANUC AC 11/7.5KW • Chuck pressure monitoring, right and left • 19" touch monitor • Door lock • Clamping force control • Helical interpolation • NT-Nurse 2 • NT-Work navigator • Feed rate and rapid traverse adjustment switch • Transformer • CE marking • Memory capacity 2560 meters • Tool offset memory 99 items • Program management 2000 programs • Extended editor function • Background editor • Macro B • Direct input of drawing dimensions • G52-G59 • Polar coordinate interpolation • Cylindrical interpolation • Current documentation • Machine color RAL 9002, light gray • Door color RAL 7011, iron gray • Chip conveyor RAL 7024, graphite gray Hodez Iy Uropfx Ak Uofn Machine options NTJ-100 Air and coolant blow-out through the right spindle Ø 65mm NTJ-100 Chuck blow-out, left spindle NTJ-100 Intelligent handwheel NTJ-100 Polygon turning function Manual tool probe, removable for left and right Workpiece unloading NTJ-100 Unloading with gripper hand on the upper turret for parts up to Ø 65 mm x length 150 mm / 3.0 kg NTJ-100 Material collection tray type A with enclosed collection box, left, for material remnants and finished part ejection, part size up to spindle bore 65 mm NTJ-100 enlarged main spindle, left, Ø 65 mm, spindle nose A6 NTJ-100 enlarged counter spindle, right, Ø 65 mm, spindle nose A6 Chip disposal Hinged belt chip conveyor for NTJ-100, discharge right. Manufacturer: AME. Color: RAL 7024. Motor right, in the direction of travel.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 10,245 h, spindle speed (max.): 6,000 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 406 mm, spindle motor power: 11,200 W, total height: 2,060 mm, total width: 1,780 mm, overall weight: 3,600 kg, controller manufacturer: HAAS, controller model: NGC, product length (max.): 3,200 mm, number of slots in tool magazine: 12, number of axes: 2, Horizontal turning machine manufactured in 2019. This HAAS ST-10 features a maximum turning diameter of 229 mm and a maximum turning length of 355 mm. It includes a spindle power of 11.2 kW and a maximum spindle speed of 6,000 rpm. If you are looking to get high-quality turning capabilities, consider the HAAS ST-10 machine we have for sale. Contact us for further details. Main spindle • Spindle nose: A2-5 • Max bar capacity: 44 mm • Max turning diameter: 229 mm • Max turning length: 355 mm • Max swing over bed: 413 mmTurret and axis travels • Number of tool positions: 12Tailstock • Type: Manual • Quill taper: MT3 Hfjdpsz Izyijfx Ak Uen • Tailstock travel: 508 mm • Quill travel: 95 mmElectrical supply • Voltage: 440 V (per machine nameplate) • Phases: 3Options included: • Measuring probe • 175 mm three-jaw chuck • Hainbuch SK52 collet chuck Technical Specification Counter Spindle No Driven Tools No Taper Size VDI 40

Condition: ready for operation (used), Year of construction: 2012, operating hours: 41,280 h, travel distance X-axis: 165 mm, travel distance Z-axis: 700 mm, total height: 2,200 mm, total width: 1,630 mm, overall weight: 9,000 kg, controller manufacturer: FANUC, controller model: Series 31i-MODEL A, product length (max.): 2,800 mm, number of axes: 8, This 8-axis DOOSAN PUMA TT 1800 SY was manufactured in 2012. It features a maximum turning diameter of 230 mm and a maximum workpiece length of 700 mm. The machine is equipped with two spindles and two turrets, providing enhanced machining capabilities. If you are looking to get high-quality turning and milling capabilities, consider the DOOSAN PUMA TT 1800 SY turn-mill centre we have for sale. Contact us for further details. - Operating Hours: 41,280 h (as of Spindle Hours: 24,632 h (as of Total Machined Parts (TEIL GESMT): 14,162 pcs- Number of Spindles: 2 (Main Spindle & Counter/Sub Spindle)- Main Spindle Speed Range: 50 - 5,000 rpm- Counter Spindle Speed Range: 50 - 6,000 rpm- Number of Turrets: 2 (Tool holders)- Powered/Driven Tools: Yes- C-Axes: 2- Y-Axes: 1 (Upper turret)- Max. Turning Diameter: 230 mm- Max. Workpiece Length: 700 mm- Power Supply Voltage: AC 200/220V, 3-Phase (PE, 50/60 Hz) / 400 V, 50 Hz- Rated Power (Nennleistung): 75.21 kVA- Full Load Current (Volllaststrom): 197.37 A- Interrupting Capacity (Unterbrechungsstrom): 13 kA- Short-Circuit Current (Kurzschluss-Strom): 25 kA- Schematic Output (Schaltplan-Ausgabe): PT1H31AA02- Additional Equipment & Accessories: * FMB turbo 8-80/3200 bar feeder * Chip conveyor * Coolant system with belt filter * Internal coolant supply (IKZ) & supply via turret head * Hydraulic power unit * Large selection of tool holders, collet chucks (REGO-FIX / ER), and turning inserts Technical Specification Counter Spindle Yes Driven Tools Yes Hfsdez I Rbvjpfx Ak Uon

Condition: like new (used), Year of construction: 2021, operating hours: 1,400 h, CNC turning machine MT RENT T25FSY Year of manufacture: 2021 Hjdpfoz I R Sbjx Ak Ujfn Control: SIEMENS 828 D Operating hours: 1400 h Technical data: * Year of manufacture: 2021 * Control: Siemens Sinumerik 828D * Operating hours: approx. 1,400 h * Max. swing diameter over bed: 600 mm * Max. turning diameter: 460 mm * Max. turning length: 558 mm * X-axis travel: 310 mm * Z-axis travel: 620 mm * Y-axis travel: 110 mm / ±55 mm * B-axis travel / counter spindle: 650 mm * Spindle bore: 77 mm * Max. bar diameter: 65 mm * Main spindle speed: max. 4,500 rpm * Counter spindle speed: max. 4,500 rpm * Main spindle motor: 23 kW * 12-station BMT-60 tool turret * 12 driven tool stations * Tool shank: 25 × 25 mm * Max. drilling bar diameter: 40 mm * Hydraulic working pressure: 40 bar Equipment: * Y-axis * C-axis * Counter spindle * Driven tools * BMT-60 turret * WTO / QuickFlex tool holder * Bar loader * Chip conveyor * Hydraulic 3-jaw chuck * Coolant system * Workpiece/part catcher * Foot pedals * Flat guides

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 8,000 rpm, overall weight: 3,750 kg, total width: 2,100 mm, total height: 2,245 mm, bar diameter (max.): 32 mm, product length (max.): 2,289 mm, number of axes: 10, This 10-axis TORNOS EvoDECO 32 was manufactured in 2022. It features a main spindle and counter spindle with a maximum speed of 8,000 RPM, and a bar capacity of up to 32 mm. The machine includes a robust tooling system with multiple rotating tools and a high-pressure coolant system. If you are looking to get high-quality turning capabilities, consider the TORNOS EvoDECO 32 swiss type turning machine we have for sale. Contact us for further details. Technical Specification Hjdpfx Ajz I Sxvsk Usfn Counter Spindle Yes

Year of construction: 2020, condition: used, Manufacturer: KAPP Model: KF3-1500-1 Hfjdpjz Iubtefx Ak Usn Year: 2020 Type: shell-and-tube heat exchanger / tubular heat exchanger Condition: new (declassified) – never put into production. Material: 316L stainless steel Heat transfer surface area: 2 m² Original working fluid: steam, Group 2 (tube) / 70 per cent glycol, Group 2 (shell) Operating pressure: -1/8 bar (tube) / -1/6 bar (shell) Operating temperature: 180 °C (tube) / 150 °C (shell) Test pressure: 17.6 bar (tube) / 16.3 bar (shell) Volume: 7 L (tube) / 10 L (shell) A bundle of around thirty tubes, flanged tube sheet Heat exchanger with expansion joint (bellows) Flanged connections on the heat exchanger side (inlet and outlet) 2 stainless steel mounting brackets Unladen weight: approximately 50 kg

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 320 mm, travel distance Z-axis: 1,097 mm, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 3, Horizontal turning machine manufactured in 2000. This Gildemeister CTX 500 S2 features a maximum turning diameter of 455 mm and a turning length of 1097 mm. It includes a robust tool system with a disc turret and a maximum chuck diameter of 315 mm. If you are looking to get high-quality turning capabilities, consider the Gildemeister CTX 500 S2 machine we have for sale. Contact us for further details. - Max. Swing Over Bed / Slide: 680 mm / 670 mm- Max. Turning Diameter over Face Slide: 455 mm- Max. Turning Length: 1097 mm / 2097 mm- Spindle Head Flange: 220 mm (Size 220h5)- Spindle Bore: 107 mm- Spindle Bearing Front Diameter: 140 mm- Max. Chuck Diameter: 315 mm / 400 mm- Tailstock Quill Taper: MK 5 / MK 6- Tailstock Quill Diameter: 120 mm- Tailstock Quill Stroke: 120 mm- Tool System: Disc Turret- Number of Slide Carriage Sets: 1- Number of Face Slides: 1- Longitudinal Stroke: 1097 mm / 2097 mm- Face Stroke: 320 mm- Max. Torque: 650 Nm / 2000 Nm- Feed Force (Longitudinal / Plan): 1 N / 8000 N- Rapid Feed (Longitudinal / Plan): 30 m/min / 24 m/min- Feed Speed Range: mm/min- Main Drive Motor Type: B3- Feed Drive X-Plan Motor: Siemens 1FK6063-6AF71-1AH0 (1.9 kW, 3000 rpm, IP64)- Feed Drive Z-Longitudinal Motor: Siemens 1FK6101-8AF71-1AG0 (4.9 kW, 3000 rpm, IP64)- Lubrication Motor: Vögele 113.50.000701C (0.13 kW, 2200 rpm, IP44)- Hydraulic Motor: 2.2 kW, 1450 rpm, IP54- Connected Load / Power Requirement: 58 kVA- Voltage: 400 V- Frequency: 50 Hz- Current: 85 A- Fuse Rating: 100 A- Control Voltage: 230 V AC / 24 V DC- Floor Space Required: 8.41 m x 4.3 m x 2.41 m (5607/6657 x 3285 x 2405 mm)- Machine Weight: 8700 kg / 10000 kg- Additional Equipment: Chip conveyor with chip container, coolant system, exhaust filter unit (IFM) Technical Specification Counter Spindle No Driven Tools Yes Hjdpfx Aksz Iqnpe Usfn

Condition: excellent (used), Year of construction: 2012, Ref:11153 . 2012 SCS Automaberg Trim & Perf Duplex Die-cut, Trim, Split, Cut, Perforate, Punch System, handling any material. Features: A highly versatile and productive line which is a genuine “ALL-IN-ONE” solution for finishing operations. The line can include different workstations for multiple tasks and process optimization. The combination of TRIM & PERF with complementary modules offers high quality products combined with reliability, allowing the needs of digital systems to be met, as well as those for binding, in particular, the production of products for single and multi-up work IN A SINGLE PASS. Features: Easily moveable. In-feed belt height adjustable for easy connection with upstream machines. Hfsdpfsz Ek S Asx Ak Uen A simple push button transforms TRIM & PERF into a regular conveyor belt, no bypass or similar equipment needed. ‘CONTINUOUS FEEDER’ Top loading, bottom feeding, rubber belt type feeder for single or folded sheets, saddle stitched products and perfect bound books. ‘3 WAY’ This module allows perfect alignment of digital sheets to a print reference mark. ‘GRIPPER’ Electronic system for pass die-cutting: reduces machine set-up times and overlaying, allows a high level of product repeatability and reduces costs of American style dinking dies. Waste ejection system allows for die cutting without waste, clean shape products. ‘THERMO STICK’ holds some sheets together on the ink reference sides by ‘thermo’ welding - improving the die cutting process. ‘PRE-CUT DEVICE’ Perfect 'spine' cutting system up to 14 mm thickness. ‘TEAR OFF - PULL AWAY’ The system pulls away mingled perforation sheets in preparation for the sewing step. ‘SIMPLE DECK’ Collects cards in series after die cutting. ‘EXIT BELT’ Shingle delivery belt with batch counter. DIE CUTTING No nicks! Connections between the cut product and the waste are not required. Automatic waste ejection. 'Clean' shapes ready to be packed. TRIMMING-SPLITTING Superior quality in splitting and trimming - also for very small dimensions. ROUND CORNER CUTTING Cutting including all four corners in a single pass. PERFORATING PUNCHING Combined perforating-punching jobs in a single pass to optimize production process efficiency. IDEAL FOR:- Flat cardboard, also laminated up to 2 mm thickness, and on plastic material up to 1 mm thickness. Folded and stitched product die cut without waste. Pre-cut device for perfect spine cutting up to 14 mm thickness. Standard corner radii from 3 to 15 mm. Stamp perforating, wire-comb perforating, tear-off perforating, single hole punching, file hole punching, euro hole. Specifications: Product size untrimmed (LxW) (sizes subject to jobs) Standard max. 500 x 600 mm Standard min. 50 x 50 mm Product thickness, Standard max. 4mm (optional max.) 14mm Mechanical speed, max. 9.000 cycles/hr Compressed air requirement: 200 l/min at 6 bar.

Condition: used, Year of construction: 2002, overall weight: 10,000 kg, rotor length: 2,000 mm, power: 90 kW (122.37 HP), rotational speed (max.): 80 rpm, Lindner Micromat MS 2000 Drive motor: 90 kW, 400 V/50 Hz Control cabinet: complete star/delta Rotor speed: at 50 Hz approx. 80 rpm Rotor knives: 80 pcs. new Rotor knife shape: blunt knife 60 mm Filling opening: LxW 2030 x 1650 mm Hfsdpfjwtbyrsx Ak Usn Rotor length: 2030 mm Rotor flight circle: 560 mm Scraper comb: yes Counter knife: yes Hydraulic unit: complete Sieve cassette: screens as per customer request Total weight approx. 10.5 t Dimensions LxWxH mm: approx. 4520 x 2970 x 2660 mm Inspection and test run possible by appointment. Incl. hopper Delivery time: immediately

Condition: ready for operation (used), Year of construction: 2018, operating hours: 1,821 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 242 mm, travel distance Y-axis: 40 mm, travel distance Z-axis: 540 mm, controller manufacturer: SIEMENS, controller model: SLIM Line, number of axes: 4, This 4-axis DMG MORI CLX 350 lathe was manufactured in 2018. It features a maximum workpiece diameter of 320 mm and a maximum machining length of 530 mm. The machine is equipped with a Siemens SLIM Line CNC and offers an X-axis travel of 242 mm, Y-axis travel of +/- 40 mm, and Z-axis travel of 540 mm. If you are looking to get high-quality turning capabilities, consider the DMG MORI CLX 350 lathe we have for sale. Contact us for further details. • Maximum workpiece diameter: 320 mm • Maximum machining length: 530 mm • Bar capacity: 65 mm • Spindle hours: 236 h • Maximum spindle speed: 5,000 rpm • Spindle power: 16.5 kW • Spindle torque: 168 Nm • Y-axis: ±40 mm • C-axis: Yes • Driven tools: Yes • Counter spindle: No • Hydraulic tailstock • 12-station VDI40 turret with driven tools • 15" SlimLine operator panel • Siemens SINUMERIK 840D SL CNC with ShopTurn • USB and Ethernet connectivity • SMW Autoblok BH-D 250/1220 hydraulic 3-jaw chuck • Chuck diameter: 250 mm • Chuck bore: 66 mm • Hard and soft jaw sets included • 12 VDI40 tool holders Hfodpfx Akjzx A Ilj Usn • 6 Block Tool boring bar holders with internal coolant • PROGRESSline & Planonlight functions, including cycle time display, remaining time display and parts counter • Chip conveyor: No Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2014, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,065 mm, spindle motor power: 22,000 W, overall weight: 6,500 kg, number of axes: 3, Horizontal turning machine manufactured in 2014. This Okuma LB3000EXII features a maximum turning diameter of 340 mm and a turning length of 1,000 mm. It has a swing over bed of 580 mm and a maximum workpiece weight of 250 kg. If you are looking to get high-quality turning capabilities, consider the Okuma LB3000EXII machine we have for sale. Contact us for further details. Capacities • Swing over bed: 580 mm • Swing over longitudinal carriage: 470 mm • Distance between spindle centers: 1,020 mm • Max turning diameter: 340 mm • Max turning length: 1,000 mm • Max workpiece weight between centers: 250 kgMain spindle • Spindle diameter: 120 mm • Spindle nose: JIS A2-6 (optional JIS A2-8) • Spindle bore: 80 mmAxes • Z rapid: 30,000 mm/min • X rapid: 25,000 mm/min • Feed range X/Z: 0.001–1,000 mm/revTurret • Type: V12 • Tool stations: 12 • Suitable for turning or driven tools (L- or M-tools) • External tool size: 25 × 25 mm • Internal tool size: Ø40 mmDriven tools / C-axis • Driven-tool speed: 45–6,000 rpm • C-axis range: 360° • C-axis indexing increment: 0.001° • C-axis rapid speed: 200 rpmTailstock Hedpfsz Ni D Tsx Ak Usfn • Taper: MT No. 5 • Travel: 1,015 mm • Motor: 2.9 kWElectrical / auxiliary • Hydraulic unit pump: 2.2 kW • Lubrication pump: 0.018 kW • Coolant pump: 0.25 kW (side chip discharge) / 0.8 kW (rear chip discharge) • Supply voltage (manual): 200 V • Transformer voltages: 220 / 240 / 380 / 415 / 440 / 480 V • Frequency: 50/60 Hz • Electrical cabinet protection: IEC IP54 Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 3,200 rpm, travel distance X-axis: 239 mm, travel distance Z-axis: 1,080 mm, spindle motor power: 29,800 W, overall weight: 5,443 kg, number of slots in tool magazine: 12, number of axes: 2, Horizontal turning machine manufactured in 2022. This HAAS ST-28L features a chuck size of 12.0 in (305 mm) and a maximum part swing of 21.0 in (533 mm). It offers a maximum cutting length of 42.5 in (1080 mm) and a spindle power of 40.0 hp (29.8 kW). If you are looking to get high-quality turning capabilities, consider the HAAS ST-28L machine we have for sale. Contact us for further details. • Working hours: 0 (Showroom machine) • Chuck size: 12.0 in (305 mm) • Max part swing: 21.0 in (533 mm) • Max cutting diameter (with BOT turret): 13.00 in (330 mm) • Max cutting diameter (with BMT65 turret): 11.75 in (298 mm) • Max cutting length: 42.5 in (1080 mm) • Bar capacity: 4.00 in (102 mm) Hfsdsz N Ergopfx Ak Uon • Rapids X/Z: 945 ipm (24.0 m/min) • Max thrust X: 4100 lbf (18238 N) • Max thrust Z: 5100 lbf (22686 N) • Spindle nose: A2-8 • Spindle torque (max): 425.0 ft-lbf @ 325 rpm (576.0 Nm @ 325 rpm) • Spindle bore: 4.62 in (117.3 mm) • Turret: 12-station BOT • Boring bar rear clearance: 4.00 in (102.0 mm) • Coolant capacity: 55 gal (208 L) • Air required: 4 scfm @ 100 psi (113.0 L/min @ 6.9 bar) • Inline air hose & coupler: 3/8 in • Minimum air pressure: 80 psi (5.5 bar) • Input AC voltage (3-phase): 220 VAC / 440 VAC • Full load amps (3-phase): 70 A (220 VAC) / 35 A (440 VAC) • Shipping dimensions: 190.0 x 90.0 x 90.0 in (483 x 229 x 229 cm) Technical Specification Counter Spindle No Driven Tools Yes

Condition: used, Year of construction: 2015, sheet width 3080 mm plate thickness 16.0 mm thickness at "Niro-steel" 12.0 mm no. of strokes 7 - 12 Hub/min cutting angle 0.5 - 2.5 ° back stop - adjustable max. 1000 mm traversing speed 200 mm/sek work height max. 840 mm down holder 14 Stück Column width 3420 mm throat 350 mm Control D-Touch 7 oil volume 450 l voltage 400 V engine output 45.0 kW Hfodpjxab Rusfx Ak Uon weight 18150 kg range L-W-H 4130 x 2210 x 2570 mm Good / well-maintained condition (!!) New price ~ €120.000 Special price upon request Features: - Robust electro-hydraulic sheet metal shear ("guided") - CNC control unit D-Touch 7 ("touchscreen") * Anti-reflective robust 7" color touchscreen control panel * Easy positioning to the desired size * Positioning accuracy 0.1 mm * Unlimited material definition in the material library * Intuitive menu navigation * Separate display for actual and target values * Backgauge retraction function * Cutting length control via adjustable stroke length * Cut counter * Automatic machine stop when the programmed cuts are reached - CNC electro-motorized adjustable backgauge * Travel range max. 1,000 mm * Backgauge adjustment via ball screws and linear guides - CNC electro-motorized cutting gap adjustment - CNC Electro-hydraulic cutting angle adjustment - Heavy-duty welded steel construction - Ergonomically positioned and clearly laid-out control panel - Hold-down clamp positioned close to the cutting edge - Front light barrier (instead of finger guard) - Self-regulating hold-down clamp pressure - Rear safety device (light barrier) - 1x side stop (L = 1,500 mm) - 2x support arms (L = 1,000 mm each) - Wide sheet supports with ball transfer rollers - Mobile foot switch with emergency stop function - High-quality, regrindable blades (split) - Rear sheet chute - Original operating instructions

Condition: excellent (used), For sale: Dräger Oxylog 2000 Plus transport ventilator – a professional mechanical ventilation device used in ambulances, medical transport, emergency rooms (ER), intensive care units (ICU), and by rescue services. Hfedpfsz Slk Aox Ak Usn The device powers on and operates correctly; the display is clear, with visible menus and parameters. Good visual condition with normal signs of use appropriate for its age (see photos). The equipment is sourced from the German market. Data and Equipment: • Model: Oxylog 2000 Plus • Manufacturer: Dräger • Year of manufacture: 2015 • Version: Transport • Module: LDS RD 228 • Gas supply (O₂ / Air) • Includes transport bags • Includes hoses and mounting bracket • CE marking, Made in Germany Features: • Adult and pediatric ventilation • Ventilation modes for emergency care • Adjustable parameters: Vt, frequency, FiO₂, PEEP, etc. • Clear display with parameter overview • Safety alarms Technical condition: • Used device • Fully functional – turns on and responds to settings • No current calibration certificate (certification to be arranged by buyer if required) Legal notice: Medical equipment – intended for use by qualified personnel only. Perfect for private ambulances, medical transport companies, training purposes, military, offshore operations, or as backup equipment.

Condition: new, For sale is a used industrial set employed in welding operations by CLOOS – a renowned German manufacturer of automation systems. The set includes: Hollow shaft (Hohlwelle kurz für W) • Markings: SA-No. 455799, part number • Solid, steel construction • Manufactured: 25.05.2018 • Very good technical condition, stored, minor traces of surface corrosion Large mounting bracket / adapter (visible fixing slots) • Heavy-duty, robust construction • Suitable for use with the shaft – positioning/rotating workpieces • No play, everything is securely held • Coded mounting and internal through-hole Ideal set for: Hjdpfx Akez Slb Uo Uofn • welding positioners • industrial robot arms • adapting drives and gearboxes

Condition: excellent (used), For sale: Mannesmann Dematic AG electric chain hoist, model DKUN 5-500 K V2. A robust, industrial-grade hoist manufactured in Germany, designed for lifting loads. The chain and hook, as shown in the photos, are included. Technical data: Manufacturer: Mannesmann Dematic AG Type: DKUN 5-500 K V2 Lifting capacity: 1/1 – 0.50 t / 2/1 – 1.00 t Lifting speed: 15.0 / 7.5 m/min Motor power: 1.40 kW Power supply: 380–400 V Frequency: 50 Hz Current: 4.00–4.20 A Motor speed: 2720 rpm Protection class: IP55 Chain: 5.3 × 15.2 8DK Factory number: 63159709 Ident-No.: 836 334 44 Year of manufacture: 2000 Weight: approx. 39 kg Country of manufacture: Germany Condition: Used hoist, in the condition shown in the photos. Hedpfxoz Sny Ee Ak Uefn Important information: one of the mounting bracket elements is partially broken off, which is clearly shown in the photos. This damage does not affect the operation or functionality of the hoist. Sold exactly as shown in the photos. PRICE INDICATED IS FOR 1 UNIT.

Condition: good (used), For sale: used industrial submersible pump, KSB KRTF 100-250/74UG2-249, complete with control box, cables, and chain. The pump features a side discharge connection with a Storz-type coupling and a base for positioning the unit. Data from the nameplate: Manufacturer: KSB Type: KRTF 100-250/74UG2-249 Capacity: 5–180 m³/h, maximum approximately 3000 l/min Head: 17.4–6.2 m Rated power P2: 7.5 kW Supply: 400/690 V, three-phase Frequency: 50 Hz Rotational speed: 1450 rpm Rated current: 15.3/8.4 A Maximum medium temperature: 40°C Degree of protection: IP68 Operating mode: S1 Insulation class: F Hfodpfx Akez Spiqs Ujn Power factor cos φ: 0.81 Impeller diameter: 249 mm Included in the set: Pump with motor. Control box with buttons, switch, and operating hour counter. Power and control cables. CEE power plug. Chain. Storz-type discharge coupling.

Condition: new, ALTENDORF Model F45 Pro Drive Offer type: New machine, FOR SALE ONLY IN AUSTRIA! Immediately available new machine with promotional price and full manufacturer's warranty. Pro Drive control: 3.5" color display with separate keyboard Automatic dimension correction on the parallel and miter fence when the saw head is swiveled Easy axis calibration Machine diagnostics, operating hour counter, USB interface Recall of the last dimension input (back function) 99 storable cutting programs Grooving: with automatic step-by-step positioning of the parallel fence 400V / 50Hz - Europe, scale: scale in mm Electromotive height and swivel adjustment 0 – 46° for the main saw blade with automatic correction of the cutting height when the saw head is swiveled Machine height 910 mm (standard equipment) The control panel of the F 45 is mounted at eye level. This allows all axes to be easily controlled, and all settings are within view. The one-hand operation of the outfeed device is easily accessible from the working position in front of the machine. Another advantage: nothing stands in your way on the smooth machine front. INCLUDES OPTIONS: M62003 Template holder M64080 Extended cutting height with saw blade projection of max. 204 mm. M51101 Single-sided swiveling saw head with 7.5 kW (10 HP) motor M24030 2-axis scoring unit with electromotive height and side adjustment M24037 LED lighting for the danger area of the scoring unit M41010 Table extension 840 mm M34204 Double roller carriage, carriage length 3200 mm M44404 Miter fence, cutting length up to 3500 m. M44443 CNC parallel fence, cutting width 1300 mm. M44450 Front support roller. M37003 On/off switch on the double roller carriage Note on used machines: • Subject to errors in technical data and prior sale. • Indicated prices are ex works, pickup only - free loading! • The machine has been cleaned and function-tested. Hedpfsiz Aufex Ak Usfn • All machines are sold as is, as viewed, without any warranty claims. • The buyer is free to inspect the machines at the location. • Special agreements are only possible in written form. (We only answer inquiries if you provide your address + telephone number!)

Condition: used, Year of construction: 2015, Swiss-type CNC lathe TSUGAMI B0206E-III Very good condition, only 6000 operating hours TECHNICAL SPECIFICATIONS: Year of manufacture: 2015 CNC control: FANUC series 32i-B Number of axes: 6 Rapid traverse rate, axis X1: 24,000 mm/min Rapid traverse rate, axis X2: 24,000 mm/min Rapid traverse rate, axis Z1: 32,000 mm/min Rapid traverse rate, axis Z2: 32,000 mm/min Rapid traverse rate, axis Y1: 15,000 mm/min Rapid traverse rate, axis Y2: 15,000 mm/min Max. bar diameter: 20 mm Minimum spindle speed: 200 rpm Maximum spindle speed: 10,000 rpm Resolution of axis C: 0.001° Spindle power: 3.7 kW Minimum counter-spindle speed: 200 rpm Maximum counter-spindle speed: 12,000 rpm Hfsdpjzp D Uuefx Ak Usn Resolution of counter-spindle axis C: 0.001° Counter-spindle power: 2.2 kW Number of positions in the front tool head: 8 Number of positions in the turret 1: 5 Number of driven positions in the turret 1: 3 Speed of driven tools in the turret 1: 8,000 rpm Number of secondary machining positions: 8 Number of driven secondary machining positions: 4 Speed of driven tools in secondary machining: 8,000 rpm Maximum cross-section of the tool holder: 12 x 12 mm Weight: 1,750 kg

Condition: new, Year of construction: 2026, neu 2026 070223 prompt, Zwischenverkauf v Türkei 25700 € 490.87 € 1 15 to 1.4 mm Hfsdpowirldsfx Ak Usn 320 mm 490 mm 130 mm 1 - 40 mm 200 1/min 4 40 mm 30 mm 210 mm 215 mm 1.5 kW 1160 mm 1180 mm 1730 mm 922 kg Welded steel frame construction 4-fold ram guide Pneumatic clutch-brake combination Protective enclosure with light barriers and side doors Two-hand and foot pedal operation Manual stroke adjustment Manual ram adjustment Variable stroke rate via frequency converter Operating modes: * Adjustment mode * Two-hand release * Foot release * 2-stroke operation via light barriers * Continuous operation Touchscreen for * Stroke counter with preselection for continuous operation * Stroke rate adjustment * Lubrication intervals and duration * Alarm messages * Motor direction of rotation * Monitoring of inputs and outputs 2 free cams for connecting peripherals Automatic central lubrication Equipment in accordance with CE regulations Symbolic photos, picture incl. optional available bolster plate

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 97600 € 1844.64 € 160 to 6 mm 750 mm 1100 mm 230 mm 1 - 172 mm 45 1/min 6 100 mm 80 mm 375 mm 540 mm 11 kW 1890 mm 1950 mm 3650 mm 15500 kg Welded steel frame construction 8-fold ram guide Pneumatic clutch-brake combination Protective enclosure with light barriers and side doors Hydraulic overload protection Two-hand and foot pedal operation Manual stroke adjustment Motorized ram adjustment Variable stroke rate via frequency converter Operating modes: * Adjustment mode * Two-hand release * Foot release * 2-stroke operation via light barriers * Continuous operation Touchscreen for * Stroke counter with preselection for continuous operation * Stroke rate adjustment * Lubrication intervals and duration * Alarm messages * Motor direction of rotation * Monitoring of inputs and outputs 2 free cams for connecting peripherals Automatic central lubrication Equipment in accordance with CE regulations Symbolic photos, picture incl. optional available bolster plate OPTIONS: vibration pads € 192,00 bolster plate o.r. Hsdpfxewiqu Re Ak Usfn hydr. overload safety device o.r. etc.

Condition: good (used), Year of construction: 1989, Pressing area 2550 x 1350 mm Number of press cylinders #6 Total pressing force 140 t Opening width approx. 400 mm Hodpfxswd N Rmj Ak Uofn Operating voltage: 3 x 400 V + N, 50 Hz. Total connected load approx. 26 kW Space requirement (L x W x H) approx.: 3400 x 1600 x 2000 mm Weight: approx. 5500 kg Hydraulic hot plate press Down-piston design Electric hot platens Pressing pressure continuously adjustable via pressure switch Hydraulic pump Central control panel with all operating and Digital temperature display for both hot platens Press cycle counter Safety ripcord Rack compensation Main switch Note for used machines: • Errors in technical specifications and subject to prior sale. • Subject to change without notice. • Prices quoted are for pickup from the location - free shipping! • The machines have been cleaned and functionally tested. • All machines are sold as seen, without any warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only respond to inquiries if you provide your address and telephone number!)