Counterbalance buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
6
Forklift trucks HYSTER TYPE: H 2.00 Year of construction: 1995 Weight: 2860 kg. Engine: Gas Drive: Converter Load capacity: 2000 kg Load emphasis: 500 mm W0z89y80j Lifting height: 4500 mm Mast: Duplex-free sight height: 2780 mm Width: 1050 mm Carriage: FEM II. Gabelzingen: 1200 mm Fork carrier width: 1000 mm Side shift: more
1
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph. 3zeddq0z WYSONG 1025 Mechanical Shear -- Capacity 10' x 1/4". -- Speed 55 spm. -- Rake of upper blade 3/[...] with: -- 36" front operated power back gauge. -- Squaring arm 7’. -- Air actuated mechanical clutch. -- Optional single stroke or continuous operation. -- Full length t-slot across bed face. -- (2) spring counterbalances to ram. -- Self-compensating holddowns. -- (2) front support arms. -- (1) pair 4-edge knives. -- Bijur aut... more
3
Crane fork, charge fork, load fork, pallet fork, pallet crane fork Qkyporkpp -Tragfähigkeit1500 kg Tine length 1000 mm illuminates counterbalance Fork adjustable Weight 105 kg more
6
Vehicle data - make: Linde - type: H40T - 01 / / 2,639 h / HH 3,850 mm / 3 valve / - drive type: gas - load capacity: 4000 kg - load Centre of gravity:-lifting height: 3850 mm - range: 0 mm - built: 2012 - operating hours: 2639 - internal No.: E0036 _ Mast data - mast type: standard - height: 3850 mm - height: 2680 mm - free lift: 0 mm - carriage: 0 mm - forks: 1200 x 0 x 0 mm _ Bbgtyx8c7x Dimensions - length: 0 mm - width: 0 mm - height: 2680 mm - weight: 5970 kg _ Battery & charger -... more
4

Box & Pan Folders ROLSAN 50" x 16g / 1270mm x 1.2mm Manual Box & Pan Folder

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
ready for operation (used)
Capacity 50" x 16g /1270mm x 1.2mm Top beam rise & fall 3" / 76mm Maximum length of bend 50" / 1270mm Maximum material thickness 16g / 1.2mm Fitted with 2 x Counterbalance Weights and 45" / 1143mm Interchangeable Bending Fingers. Length 6' 6" / 1981mm Ehdxsjv Width 2' 6" / 762mm Height 4' / 1219mm Nett weight actual. 900 Kgs (0.89 Tons) more
10
Control System TX-8i Turning length [mm] 900 Spindle bores [mm] 65 / 65 Main spindle: Technology: Hollow shaft motor Speed: 5.000 rpm Power: 22,6 kW Torque: 180 Nm Bar capacity: 65 mm C-Axis: 500 U/min 3-jaw chuck: Röhm KFD-HS 170 Sub spindle: Technology: Hollow shaft motor 3xg72v3 Speed: 5.000 rpm Power: 22,6 kW Torque: 180 Nm Bar capacity: 65 mm C-Axis: 500 U/min 3-jaw chuck: Röhm KFD-HS 170 Equipment / Accessories: Chipmanagement: Chip conveyor Coolingmanagement:... more
3
Pressure:160 t stroke:20 - 200 mm no. of strokes:25 - 100 /min distance between columns:2100 mm Cap3bukn distance table/ram, max. stroke up, adjustment up:830 mm table surface area:2100 x 950 mm table height over floor:1000 mm side window:695 mm ram surface:2100 x 950 mm ram adjustment:110 mm material width of feeder:320 mm material thickness of feeder:0 - 3,0 mm feed length:0,1 - 6500 mm material cross-cut:300 mm² power requirement:22,0 + 2,2 kW weight:28,0 t dimensions (WxDxH):4,2 x 2,1 x 3,9... more
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. Nccj9 PHF series double hydraulic press is designed for forming and pressing molded, multi-ply wood components using heated or cold molds or with high frequency glue [...] PHF/120/25-13 SPECIFICATIONS:• Platen dimensions [...] x 1,300 mm (98.42" x 51.81")• Maximum opening [...] 1,000 mm (39.37")• Minimum opening with cylinders at full stroke [...] mm (13.78")• Hydraulic power [...] 3 kW (4 hp)• Number of press cylinders [...] 6• Diameter of press... more
3

Eccentric Press - Single Column EBU EBU H 160 RKFR (UVV)

Unterschleißheim, GermanyGermany dealership location
6842 km
1992
used
pressure 160 t throat 410 mm stroke 30 - 150 mm L0rb2 no. of strokes 50 Hub/min distance table/blankh.,max. stroke up,adjustm. up 555 mm table surface area 1140 x 790 mm hole in the table 450 mm table height over floor 740 mm passage to the back 450 mm ram surface 700 x 500 mm ram - range of adjustment 80 mm total power requirement 21,5 kW weight of the machine ca. 14 t dimensions of the machine ca. 1,60 x 2,20 x 3,40 m with motor, fly wheel drive, wheel guard, hydr. clutch, hydr. overload ... more
6
Vehicle data - make: Linde - type: H16T-01 / / BJ 2013 / HH 4670 mm / side-shift - drive type: gas - load capacity: 1600 kg - load Centre of gravity:-lifting height: 4670 mm - range: 0 mm - built: 2013 - operating hours: 14709 - internal No.: C0974 D2f7uuf _____ Mast data - mast type: standard - height: 4670 mm - height: 2880 mm - free lift: 0 mm - carriage: 0 mm - forks: 1200 x 0 x 0 mm _ Dimensions - length: 0 mm - width: 0 mm - height: 2880 mm - weight... more


counterbal...
daily

New machines via email!

Stay updated!
6
CNC vertical milling machine s type HM 450 CNC controller HEIDENHAIN TNC 145 Fabr. No. 82451194 built in ca. 1987 Routes x 1500 mm, Y: 630 mm, z: 630 mm Hzrsswrl Table size 2100 x 600 mm Distance spindle nose - table 600 mm Extension spindle Center - stand 640 mm Table load of Max 3000 kg ISO 50 spindle adaptor Spindle speed 60-1800 rpm in 12 steps Pinolvorschub speed 0.05 / 0.1 / 0.2 / 0.4 mm / Rev Spindle drive 22 kW Power supply 380 v, 50 Hz -Vertical head swivel +/-45° -Footsw... more
12
Hours of operation: Counter blank capacity: 2500 kg Lifting height: 4750mm Height: 2100 mm Mast: Triplex (triple) Free lift: approx. 1400 mm C7mtjnb Engine: 4-cylinder Nissan gas Gearbox: Converter Tyres: Solid rubber Front tire: 7 00-12 rear tires: 6 00-9 incl. 3 valve including forks: 1, 25 m including roof cover incl. 2 x working lights front incl. 1 x working light rear Length (without Gabelz.): approx. 2, 50m width: approx. 1, 15 m Weight: approx. 4035 kg SER. No.: UD02E7006... more
4
Pressure:160 t stroke:8 - 110 mm no. of strokes:20 - 130 /min distance between columns:1600 mm distance table/ram, max. stroke up, adjustment up:600 mm table surface area:1600 x 700 mm hole in the table:700 x 200 mm table height over floor:810 mm column travel -side:700 mm ram surface:1600 x 700 mm ram adjustment:80 mm material width of feeder:20 - 400 mm material thickness of feeder: - 5,0 mm feed length: mm power requirement:18,5 kW weight:20,0 t dimensions (WxDxH):3,0 x 2,0 x 3,3 m German Saf... more
1
Elect./Voltage: 220 V, 60 Cy, 3 Ph. Bbuvcjcy7k ROSENQUIST 838 CPP Curved Plywood Press 66" Left-to-right x 36" deep single platen Radio Frequency [...]: -- 36" Daylight opening with 36" of downward movement; adjustable limit switch controls downward movement. -- 20 kW Frequency generator. Equipped with: -- Clear side-to-side opening of 72" for ease of loading from the 66" side; -- Platens have 1-1/2" lip on all (4) sides for attaching forms; down-acting hydraulic cylinders with rod-wiper... more
- Feeder with counterbalance - Die cutting unit - Stripping unit - Delivery - Control from the touch screen - Highest pressure at a maximum of 3.0 MN (300t) - Automatic non-stop pallet feeder max.1000 mm high - Non-stop pallet feeder Nfdmh more
6
Vehicle data - make: Linde - type: H16T-01 / / BJ 2013 / HH 4670 mm / side-shift - drive type: gas - load capacity: 1600 kg - load Centre of gravity:-lifting height: 4670 mm - range: 0 mm - built: 2013 - operating hours: 14661 - internal No.: C0975 _____ Mast data - mast type: standard - height: 4670 mm - height: 2880 mm - free lift: 0 mm - carriage: 0 mm - forks: 1200 x 0 x 0 mm _ Dimensions - length: 0 mm - width: 0 mm - height: 2880 mm - weight: 3025 kg... more
2
Working width 3500 mm Working height 2450 mm Number of cylinders 6 St. loading dimensions L x W x H 4900 x 1500 x 3200 mm !! Machine on order for sale !! still in use # 2462 Frame press Hess Lux 2000 Frame press, electrohydraulic, For the main areas of application: commission-wise Production, one-off production, slanted windows, series production. Measurement via optoelectronics with program options: Manual and automatic program for dimension setting and pressing cycle. Automatic, tampere... more
15
LISEC insulating glass manufacturing plant barely used, since ur 1 person was used and operated it were manufactured for approx. 3000 piece of insulating glass in time. Mtr is 25. Long and a footprint of 3.5 x height of 4.00 needs consisting of: AKL connection zone type RTV 11/25 PSL/VK machine number 893 69048 1294 fully automatic vert. Edge processing plant AKL 25 V Machine number 161 162019 1294 Running-in zone in the con. Inlet station e.g. washing machine RTV 16/25 AE Machine number 813... more
5
pressure:0315 t distance between columns:2500 mm stroke:400 fix mm no. of strokes:18 /min distance table/ram, max. stroke up, adjustment up:1100 mm table surface area:2500 x 1400 mm table height over floor:750 mm side window:770 mm ram surface:2450 x 1400 mm ram adjustment:160 mm pressure of drawing cushion in table:63 t stroke of drawing cushion in table:130 mm height over floor:6,0 m power requirement:45,0 kW weight:55,0 t Dimensions (WxDxH):4,3 x 2,5 x 8,0 m list price: WITHOUT putting into ... more
1

STRAIGHTSIDE MINSTER E2H-250-120

North Carolina, United StatesUnited States dealership location
518 km
2012
used
Elect./Voltage: Bbuvfiorfu Minster E2H-250-120 “Hevi-Stamper” -- Press Specifications: -- Force × Distance off Bottom: [...] ton × 0.236 in wo/ ASM -- Crankshaft Extension Location: [...] -- Drive Arrangement: [...] Twin-End -- Drive Location: [...] Drive -- Lube Unit Location: [...] Leg -- Approximate Press Weight: [...] lb -- Scale and Display Units: [...] -- Shop Air Pressure, Minimum: [...] psi -- Press Slide Specifications: -- Stroke Length: [...] in -... more
6
Welding fume extraction for wall mounting PLYMOVENT type Plymoth 2100 Aspirator with adjustable and telescopic suction tube Year of manufacture 2000 Flow rate m3/h for 1550 Suction tube ø 150 mm Suction head ø 300 mm Air outlet 120 x 120 mm Extraction smart length 1000 mm Motor output 0,75 kW Power supply 400 Volt, 50 Hz. -Suction head with flap -telescopic suction arm of 1.2 to 2 meters -Extraction arm with wall bracket and counterbalanced for easy adjustment and telescope -Wall Mo... more
6
Vehicle data - make: Linde - type: H16T-01 / / BJ 2013 / HH 4670 mm / side-shift - drive type: gas - load capacity: 1600 kg - load Centre of gravity:-lifting height: 4670 mm - range: 0 mm - built: 2013 - operating hours: 15425 - internal No.: C0976 _____ Mzhed Mast data - mast type: standard - height: 4670 mm - height: 2880 mm - free lift: 0 mm - carriage: 0 mm - forks: 1200 x 0 x 0 mm _ Dimensions - length: 0 mm - width: 0 mm - height: 2880 mm - weight: ... more
Automatic Die Cutting Machine Heidelberg Varimatrix 105 CS 9wsutfm Manufacturer: Heidelberg Druckmaschinen A.G., Germany Production Year: 2007 Max. Size/Width: 750x1050 mm (29.5"x41.3") Counter: approx 20.000 hours Work Experiences: corrugated cardboard up to 4 mm, cardboard up to 2 mm Availability: end year 2018 very good condition, well-maintained, still in production More Details: feeder with counterbalance die cutting unit stripping unit delivery control from the ... more
3
• travel range: X 2400, Y 1400, Z 1250, quill manual movement 200mm • table: 3000 x 1400m, min./max. distance spindle - table: 50/1500mm • throat: 1500mm, max. table load: 10000kg • feed motors: Indramat AC, rapid traverse X,Y 10m/min, Z 6m/min • milling motor: Siemens DC 30kW; spindle-Ø in front bearing: 130mm • quill-Ø: 230mm, 4 automaticly switched gears from 40 to 4000 rpms, max. torque 4580Nm Bb909kfhgi • electrical toolclamping taper 50 DIN 2080 • headstock swivelability: ±45° • ... more
3
Pressure:63 t throat:400 mm stroke:16 - 90 mm no. of strokes:60 /min distance table/ram, max. stroke up, adjustment up:350 mm table surface area:1000 x 750 mm hole in the table:260 x 140 mm table height over floor:710 mm ram surface:600 x 220 mm ram adjustment:50 mm power requirement: kW weight:4,3 t dimensions (WxDxH):1,1 x 2,6 x 2,4 m list price: in running function in our warehouse: list price: including NEW electrical controls: list price: mechanical PARTLY OVERHAULING:mit neuer Exzenterwe... more
1
Elect./Voltage: 220/440 V, 60 Cy, 3 Ph. Wth8k BLOW SC2-150-50-36 Straightside Two Point Variable Speed Press -- Capacity 150 Ton. -- Stroke length 4". -- Speed 40 to 120 SPM. -- Shut height 16". -- Ram adjustment (power) 6". -- Slide area 49" x 36". -- Bed area 50" x 36". -- Window width 20" -- Motor 25 HP/1150 [...] with: -- Air clutch & Brake. -- Air counterbalance. -- Variable speed drive. -- Tie rod construction. -- Power ram adjustment. -- 4" T-Slotted bolster plate. -... more
2

Milling machine EMCO VMC 300

More Emco Vmc 300
Ahornweg 10, 74626 Bretzfeld, DEGermany
6655 km
1998
good (used)
VMC 300 vertical machining center, Control Siemens 810 D,. Speed range 0-5000 rpm,. 12 WerkzeugmagazinSK40 9/11 kW drive motor power automatic tool change Milling table with T-slot DIN 14 mm, 850 x 325 mm, clamping surface Vertical slide with counterbalance, Central lubrication system, Tool taper exhaust device Coolant system, Hjo0e9h Machine lamp Full fairing incl. transparent protective door more
6
Vehicle data - make: Linde - type: H25T / / triplex / HH 5515 mm / side-shift - drive type: gas - load capacity: 2500 kg - load Centre of gravity:-lifting height: 5515 mm - range: 0 mm - built: 2006 - operating hours: 11005 - internal No.: C0465 Fp87w8fei _____ Mast data - mast type: triplex - lifting height: 5515 mm - height: 2454 mm - free lift: 1811 mm - carriage: 0 mm - forks: 1200 x 0 x 0 mm _ Dimensions - length: 0 mm - width: 0 mm - height: 2454... more
5

high speed blanking press Schuler A2-125

Berkswell, United KingdomUnited Kingdom dealership location
5803 km
1972
used
One used Schuler A2-125, double sided high speed blanking press Capacity: 125 tons Fixed stroke 25 mm No of strokes per minute 100 - 300 SPM Distance between columns 1000 mm Distance table/ram, max. stroke up, adjustment up 400 mm Table surface area 1150 x 1000 mm Drop hole in table 900 x 220 mm Table height above floor 1200 mm Side window 300 mm Ram surface 1000 x 850 mm Ram drill hole x depth 65 mm Ram adjustment 60 mm Total power requirement 33 kW Weight of the machine approx 300... more
3
YOM: 1978 Total modernization: 2008 Diameter of a work piece, max, mm - The frame is max. front position, mm.: 8000 - The frame is max. back position, mm.: 12000 Kkpozrm7 Mass of a work piece, tons 400 Diameter of a disk chuck of a table, mm 7500 CNC: Siemens Sinumerik 840 Travels, mm: Z1-axis 3200 Z2-axis 5800 X1-axis 4100 X2-axis 2800 U-axis 1250 (PF2500)/ 750 (PF1500) W-axis C-axis Mass of VTL, tons approx. 650 Modernization: The purpose of modernization consisted in the following: to mak... more
4
Pressure:250 t throat:450 mm stroke:8 - 135 mm no. of strokes:50 /min distance table/ram, max. stroke up, adjustment up:635 mm table surface area:1250 x 850 mm hole in the table:355 mm table height over floor:950 mm passage to the back:660 mm ram surface:790 x 610 mm ram adjustment:120 mm power requirement:18,5 kW weight:14,0 t Dimensions (WxDxH):1,5 x 2,8 x 3,65 m list price: in running function in our warehouse: German Safety: permitted for manual loading:CE-Norm - EN 692, BGR 500 2pykgy cl... more
1
Elect./Voltage: Bbuve87lrt MINSTER "P2-200" PIECE-MAKER 200 TON STRAIGHTSIDE PUNCH PRESSThis press is being sold as rebuilt and reconditioned. Please inquire directly if you are interested in purchasing it "As Is". -- Capacity: 200 tons -- Stroke: 1.5" -- Shut Height: 20" -- Slide Adjustment: 3" (Manual) -- Strokes Per Minute: 0-300 Variable Speed -- Bed Area: 72" L-R x 44" F-B -- Ram Area: 72" L-R x 44" F-B -- Window: 15" -- Cast Iron Construction -- Steel Tie Ro... more
1
Hand Folder Weipert HKB 1050 x formed component spring for top beam lock and rebound spring for bending beam handle for bending beam rotation bending angle stop with scale up to 135° top beam tool... more
4

 Low level order picker HYSTER L02.0

Helmstedt, GermanyGermany dealership location
6606 km
used
Pallet trucks - counterbalanced trucks - stacker without battery to hobbyists Uqs8c "Pickers, called also"order picker", the loading of pallets in the pure stock operation used to." The types of LO2. 0 M and LO2. 0 are for accessing prevailing in the first level. sets, with the help of the integrated climb in the back, the operator can rest in the 2nd level access. For intensive picking in the first and the second level was the type LO2. 0 L with additional the platform lift equipped. Wi... more
3
Pressure:200 t stroke:10 - 50 mm no. of strokes:50 - 250 /min distance between columns:820 mm distance table/ram, max. stroke up, adjustment up:425 mm table surface area:800 x 1000 mm hole in the table:300 x 200 mm table height over floor:925 mm side window:550 mm ram surface:600 x 800 mm ram adjustment:50 mm power requirement:37,0 kW weight:18,0 t dimensions (WxDxH):2,4 x 2,55 x 3,6 m list price: in running function in our warehouse: German Safety: permitted for atomatic mode:CE-sign infinite... more
1
Elect./Voltage: 400 V, 60 Cy, 3 Ph. Bbux2mslcv HARDINGE VMC800II Vertical Machining CenterSpecifications: -- X-axis travels 31.50”. -- Y-axis travels 20.08”. -- Z-axis travels 20.08”. -- Y-axis throat distance 23”. -- Table width 20.00”. -- Table length 36.40”. -- Load capacity 1,540 lbs. -- T-slots (# & size) .708” x 3 x 6.3”. -- Spindle taper 40. -- Spindle speed range 10,000 rpm. -- Transmission belted. -- Motor (cont/peak) 10 /15 ... more
2
pressure:315 t stroke:20 - 180 mm no. of strokes:30 - 80 /min distance between columns:2100 / 1720 mm distance table/ram, max. stroke up, adjustment up:650 mm table surface area:2100 x 1200 mm hole in the table:700 x 250 mm table height over floor:900 mm side window:550 mm ram surface:17300 x 1150 mm ram adjustment:120 mm material width of feeder:500 mm material thickness of feeder:0,3 - 4,0 mm power requirement:68,0 kW weight:52,0 t dimensions:3,7 x 2,8 x 5,1 m list price: in running function i... more
5
pressure:100 t throat:375 mm stroke:20 - 125 mm no. of strokes:30 - 80 /min distance table/ram, max. stroke up, adjustment up:515 mm table surface area:900 x 635 mm hole in the table:280 mm table height over floor:800 mm passage to the back:570 mm ram surface:700 x 450 mm Luq0j ram adjustment:80 mm power requirement:15,0 kW weight:8,0 t dimensions (WxDxH):1,5 x 2,4 x 3,5 m list price: in running function in our warehouse: list price: mechanical PARTLY OVERHAULING:Erneuerung Stütz-, Pleuel- und... more
4
pressure:400 t throat:520 mm Ucjrpkqgi stroke:20 - 200 mm no. of strokes:30 /min distance table/ram, max. stroke up, adjustment up:680 mm table surface area:1600 x 1000 mm table height over floor:715 mm passage to the back:1000 mm ram surface:1300 x 800 mm ram adjustment:130 mm power requirement:38,0 kW weight:41,0 t dimensions (WxDxH):2,1 x 2,6 x 4,2 m list price: in running function in our warehouse: German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch-/ brake combinati... more
3
pressure:100 t throat:410 mm stroke:8 - 112 mm Izewu2h no. of strokes:52 / 78 /min distance table/ram, max. stroke up, adjustment up:467 mm table surface area:950 x 700 mm hole in the table:280 mm table height over floor:800 mm passage to the back:380 mm ram surface:560 x 360 mm ram adjustment:80 mm power requirement:7,5 kW weight:7,0 t dimensions (WxDxH): 1,2 x 2,0 x 2,8 m list price: in running function in our warehouse: German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 fri... more
2
pressure:100 t throat:315 mm stroke:20 - 180 mm no. of strokes:40 - 75 /min distance table/ram, max. stroke up, adjustment up:520 mm table surface area:840 x 600 mm hole in the table:280 mm table height over floor:900 mm passage to the back:420 mm ram surface:560 x 350 mm ram adjustment:80 mm power requirement: kW Nrsrwkb2 weight:7,1 t dimensions (WxDxH):1,7 x 2,0 x 3,1 m list price: in running function in our warehouse: German Safety: permitted only for safe tools: inclinable: infinitely va... more
1
pressure:200 t stroke:80 mm no. of strokes:50 - 150 /min distance between columns:1700 mm distance table/ram, max. stroke up, adjustment up:705 mm Ba0ucgcuwh table surface area:1600 x 1000 mm hole in the table:950 x 350 mm distance between oil collecting pans:1500 mm side window:800 mm ram surface:1500 x 1000 mm ram adjustment:125 mm power requirement:45,0 kW weight:28,0 t dimensions (WxDxH):3,2 x 2,5 x 4,55 m dimensions of switch cabinet (WxDxH):3,1 x 0,6 x 2,6 m list price: in running fu... more
4
pressure:250 t throat:500 mm stroke:30 - 220 mm no. of strokes:40 /min distance table/ram, max. stroke up, adjustment up:645 mm table surface area:1140 x 980 mm 88urqltrm table height over floor:800 mm hole in the table:450 / 500 mm Passage to the back:450 mm ram surface:800 x 500 mm ram adjustment:125 mm power requirement:18,5 kW weight:15,0 t Dimensions (WxDxH):1,8 x 2,8 x 3,5 m list price: in running function in our warehouse: German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5... more
2
pressure:800 t distance between columns:610 mm stroke:100 mm no. of strokes:45 /min distance table/ram, max. stroke up, adjustment up:460 mm table surface area:590 x 590 mm ram surface:550 x 430 mm ram adjustment:50 mm power requirement:22,0 kW weight:18,0 t Dimensions (WxDxH):2,0 x 2,8 x 3,2 m list price: in running function in our warehouse: German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 Bb8em3089e clutch-/ brake combination:pneumatic ram counterbalance:pneumatic more
3
Pressure:320 t stroke:20 - 200 mm no. of strokes:20 - 60 /min Throat:510 mm distance table/ram, max. stroke up, adjustment up:720 mm table surface area:1300 x 1000 mm table height over floor:420 x 250 mm ram surface:1190 x 990 mm ram adjustment:120 mm material width of feeder:500 mm material thickness of feeder: - 5,0 mm feed length:9999,9 mm material cross-cut:1500 mm² power requirement:37,0 kW weight:30,0 t dimensions (WxDxH):2,1 x 3,7 x 3,7 m list price: in running function in our warehouse: ... more
2
pressure:125 t throat:440 mm stroke:20 - 120 mm no. of strokes:44 / 66 /min distance table/ram, max. stroke up, adjustment up:460 mm table surface area:1030 x 730 mm hole in the table:395 mm table height over floor:790 mm passage to the back:440 mm Vizfkbm ram surface:800 x 500 mm ram adjustment:100 mm power requirement: kW weight:10,2 t dimensions (WxDxH):1,4 x 2,6 x 3,1 m list price: in running function in our warehouse: German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 fri... more
1
Pressure:125 t throat:420 mm stroke:20 - 140 mm no. of strokes:55 /min distance table/ram, max. stroke up, adjustment up:565 mm table surface area:1060 x 730 mm hole in the table:400 mm passage to the back:700 mm ram surface:800 x 500 mm ram adjustment:90 mm power requirement:18,5 kW Weight:9,5 t Ck7mvdnm Dimensions (WxDxH):1,7 x 2,2 x 3,4 m list price: in running function in our warehouse: German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch-/ brake combination:pneumatis... more
3

Crank Press - Double Column DREES ZE 500/160

Eislingen, GermanyGermany dealership location
6698 km
1973
used
pressure:0500 t stroke:40 - 160 mm no. of strokes:32 / 48 /min distance between columns:1620 mm distance table/ram, max. stroke up, adjustment up:660 mm table surface area:1600 x 1300 mm table height over floor:750 mm column travel -side:400 x 430 mm ram surface:1400 x 1200 mm ram adjustment:120 mm material width of feeder:1000 mm material thickness of feeder:- 6,0 mm feed length:350 mm pressure of drawing cushion in table:60 t Vripgm stroke of drawing cushion in table:100 mm drawing cushion su... more
4
pressure:063 t stroke:70 fix mm no. of strokes:15 - 60 /min distance between columns:1340 mm width between oil collecting pans:1180 mm distance table/ram, max. stroke up, adjustment up:328 mm table surface area:1260 x 700 mm hole in the table:1000 x 100 mm table height over floor:1000 mm column travel -side:470 mm ram surface:1300 x 650 mm ram adjustment:100 mm power requirement:27,5 kW weight:13,7 t Dimensions (WxDxH):3,4 x 2,1 x 3,4 m list price: in running function in our warehouse: German S... more
5

Crank Press - Double Column PME ZH 2500/1600 (CE)

Eislingen, GermanyGermany dealership location
6698 km
2000
used
pressure:0250 t stroke:20 - 200 mm no. of strokes:25 - 75 /min distance between columns:1680 mm width between oil collecting pans:1420 mm distance table/ram, max. stroke up, adjustment up:760 mm table surface area:1600 x 1000 mm side window:860 mm ram surface:1400 x 1000 mm ram adjustment:140 mm Bqgbpuog power requirement:41,0 kW weight:24,8 t dimensions (WxDxH):2,85 x 2,3 x 4,4 m list price: in running function in our warehouse: German Safety: permitted for atomatic mode:CE-sign clutch-/ bra... more


counterbal...
daily

New machines via email!

Stay updated!

to

to

Edit search
COUNTERBALANCE
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close