Used Balance Scale for sale (2,998)

Condition: used, This listing is for an OHaus Harvard Trip 1400/1500 Scales 2-5ib Capacity Mechanical Balance Dwsdpexv Aflsfx Ab Nsc The unit is in full working condition and is ready for immediate release The Harvard Trip series is a precision, mechanical two‑pan (comparative) balance. Its principal use is for comparative weighing (i.e. comparing masses, not simply reading off an absolute weight) — you place an unknown object on one pan and “poise” weights / sliding masses on the other pan until balance is achieved. Because it is mechanical, it requires no external power supply (no battery or electronics). The Harvard Trip balances are known for durability, low maintenance, and long service life.

Condition: good (used), Sartorious Stainless platform scale / balance trolley Stainless mobile platform scale with a Mariotti & Pecini homogenisor attachment Dodod Tw Ixjpfx Ab Nowc

Condition: used, This listing is for a Sartorius Tare CPA34001S Analytical Balance The unit is in full working condition and is ready for immediate release. This model offers a weighing capacity of up to ~34,000 g (34 kg) with a readability of 0.1 g. It includes an automatic internal calibration (isoCAL) function, allowing the balance to self-calibrate at set intervals to maintain accuracy. The weigh cell is described as “monolithic weigh cell technology” which gives stability, precision and durability. Large weigh pan: e.g., specification documents list a pan size of 400 × 300 mm for this model. The housing is designed to be robust and chemical-resistant for tough lab environments. Interface: it supports RS-232C / V24‐V28 serial interface for data logging, printing, external systems. Fast response time: average response stated < 2 s in one specification sheet. Tare function: full subtractive tare up to 100% of capacity is supported. Technical Specifications (typical) Based on the manual and spec sheet for this model: Capacity (Max): 34,000 g (34 kg) Scale interval (d): 0.1 g Linearity: ±0.2 g (typical) Repeatability (standard deviation): ≤ 0.1 g Pan size: ~400 × 300 mm Dimensions (W × D × H): ~313 × 532 × 120 mm Typical response time: ≤ 2 s Operating ambient temperature with isoCAL: 0 °C to 40 °C; without: +10 °C to +30 °C (from manual) Interface: RS-232C serial, 7-bit, various parity, 150-19200 baud. Applications & Use-Case Given its capacity (34 kg) and readability (0.1 g), this balance is suited for large-capacity analytical weighing rather than ultra-fine micro-weighing. Typical uses could include: Dwedsxrt N Hopfx Ab Nsc Weighing bulk samples, large containers or vessels (e.g., large drums, tanks) where still a good accuracy of 0.1 g is required. Industrial laboratories, QA/QC, production where large items must be weighed with decent precision. Situations where the weighing pan size needs to accommodate large items (400×300 mm is relatively large). Environments where interface to computer/printer is needed for logging and traceability. Where regular internal calibration is a benefit to maintain accuracy over time without frequent manual external weight calibration.

Condition: used, Year of construction: 2009, operating hours: 7,860 h, functionality: fully functional, total length: 2,160 mm, total width: 1,110 mm, total height: 1,600 mm, overall weight: 2,600 kg, input frequency: 50 Hz, type of input current: three-phase, input voltage: 400 V, We offer this used Officine Monzesi Monza 410, manufactured in 2009. MONZESI Monza 410 CNC 1 centerless grinder High-precision machine in excellent working condition, available for inspection under power. Ideal for high-volume precision grinding (automotive, medical, aerospace, or micro-technical components). The original configuration of this machine made it possible to perform micrometer-precision machining of highly sensitive parts (sapphire disks). 🛠️ Key Technical Specifications • Workpiece capacity (external diameter): From 3 to 100 mm. • Maximum plunging/traverse length: 200 mm • Grinding wheel: Max. external Ø 406 mm | Max. standard width 200 mm | Motor power 15 kW (1560 rpm). • Drive wheel: Max. external Ø 254 mm | Max. standard width 200 mm | Brushless servomotor 3.9 kW, variable speed (5 to 285 rpm). • X-axis (Slide Feed): Satellite roller screw (Ø 32 mm, pitch 5 mm) driven by a 6 Nm digital servomotor with a direct optical scale for absolute micrometer precision (programmable minimum increment of 0.0005 mm). 💻 Numerical Control & Automation • CNC: FANUC Power Mate iD digital with Fanuc motors and actuators. • Operator interface: Color touchscreen with graphical pages designed for quick and easy operation. • Electronic precision: Programmable minimum increment of 0.0001 mm. • CNC advantages: Absolute encoders (pulse coders) eliminating the need for referencing at start-up, statistical management of the X-axis with programmable automatic compensation for grinding wheel wear. 📦 Included Accessories and Peripherals The machine is sold with its original equipment and essential workshop accessories: • Oil mist extraction: AR FILTRAZIONI model ARNO 1 VF system (max. flow rate 1500 m³/h) for pollution control in the work area. • Mechanical equipment: Blade holder for in-line operation, grinding wheel holder (Ø 203 mm), drive wheel holder, and static balancing devices and pivots for the grinding wheels. • Safety & Ergonomics: Full sliding protective enclosure compliant with CE standards, secured by automatic locking during wheel rotation, and equipped with internal lighting. • Complete original documentation: Installation, operation, and maintenance manuals, parts catalog, and complete electrical/hydraulic/pneumatic diagrams. (Note: Machine sold without its original fabric filter unit). 📝 Sales Terms & Logistics • Year of manufacture: 2008. • Condition: Very good condition, regular geometric cycles. • Inspection: Machine available for inspection in working condition and under power for testing. • Removal: Lifting, handling, loading onto a truck, and transportation are the sole responsibility of the buyer. (Provide lifting equipment suitable for the weight of the machine base: 2,600 kg excluding the electrical cabinet). Dodpfx Abjz Ernlo Njwc • Price: CHF 30,000 (excluding VAT). Manufacturer: Officine Monzesi Model: Monza 410 Year of manufacture: 2009 Condition: Used Category ID: 26 If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 1990, grinding length 600 mm grinding width 375 mm workpiece height 325 mm grinding height 325 mm table load max. 300 kg table longitudinal travel max. 650 mm table speeds 1 - 30 m/min grinding spindle speed 1440 / 2900 U/min grinding wheel size 300 x 50 x 76,2 mm grinding spindle drive 3,7 / 4,7 kW vertical feed grinding spindle max. 180 mm/min. cross travel 350 mm cross adjustment 1 - 40 mm rapid traverse cross 1200 mm/min total power requirement 9 kW weight of the machine ca. 3,3 t dimensions of machine L x W x H 2,75 x 2,10 x 2,05 m - with autom. positioning - Accessories: magnetic plate 600 x 350 mm, grinding wheel with flange, wheel trueing attachment, DRO on Y-and Z-axis, 1 grinding wheel Dwsdpfx Ajz N Hvaeb Nec and various flanges separate, balancing scale, wet grinding attachment

Condition: used, This listing is for the Sartorius Tare ENTRIS2202-1S Balance The unit is in full working condition and is ready for immediate use The Sartorius ENTRIS2202‑1S (also referred to as ENTRIS 2202‑1SUS in some regions) is a precision top-loading laboratory balance designed for reliable, accurate weighing of samples up to approximately 2,200 g with 0.01 g readability. Key Specifications: Capacity: 2,200 g Readability (Resolution): 0.01 g (10 mg) Repeatability: Typically 0.01 g Linearity: Approximately 0.03 g Weighing Pan Size: Around 182 mm × 182 mm (7.1″ × 7.1″) Calibration Type: External calibration (requires separate calibration weight) Display: Backlit, high-contrast screen for clear visibility Interface Options: RS‑232 port for communication with PCs or printers Built-In Functions: Includes modes for basic weighing, counting, percent weighing, animal weighing, and density determination Dwedpfx Asxhfffjb Nec Language Support: Multiple languages supported such as English, French, German, Italian, Polish, Russian, Spanish Other Features: Anti-theft locking capability, easy-to-clean removable pan and draft shield Stabilization Time: Approximately 1.5 seconds Dimensions & Build: Compact size, robust design ideal for lab environments

Condition: used, This listing is for the Ohaus Harvard trip 1400/1500 series scales Dwodpfx Absxv Difo Noc The unit is in full working condition and is ready for immediate use OHAUS Harvard Trip 1400/1500 Series Scales The OHAUS Harvard Trip 1400 and 1500 series are precision mechanical beam balances ideal for comparative and direct mass measurement. They operate on the Roberval principle, maintaining accuracy regardless of pan placement, and feature durable construction suited for education, laboratory, and industrial settings.

Condition: used, Electrodynamic balance shaft balancing machine, vertical balancing machine, balancing machine SCHENCK RoTec Type EBLY Manufacturer No. 1FLY, Year of Manufacture 2000 Workpiece/Test Specimen: Balance shafts Number of measuring planes: 2 Number of balancing planes: 2 Angle of balancing components: 145 - 215° Test specimen weight: max. 10 kg Indicated unbalance: 2 gmm/square Lowest value per scale value: 8 gmm/square Balancing spindle speed: 1200 rpm Scale disc with test specimen holder Ø 320 mm Test specimen diameter max. 400 mm Vibration sensor: P01 force sensor Angle position sensor: HBBC incremental encoder Dwsdpfx Abswgnu No Nec CAB 750 microprocessor measuring device RS232 serial interface Workpiece weight: 2.2 kg Workpiece length: 250 mm Workpiece diameter: 70 mm Power supply: 400 V, 50 Hz Rated current: 16 A - SCHENCK M341 balancing indicator Space requirement: L x W x H: 2000 x 1800 x 2000 mm Weight: 620 kg Good condition

Condition: used, This listing is for the Ohaus Scout Pro Portable balance Sp4 The unit is in full working condition and is ready for immediate release The Ohaus Scout Pro SP4001 is an intuitive, durable portable electronic balance designed for a wide range of laboratory, industrial, and educational applications. This balance is easy to operate with minimal instruction and offers advanced features for precise and reliable weighing. Key Features: Simple Operation: The Scout Pro digital scales are incredibly easy to operate, featuring a high-contrast LCD display that ensures readability from any angle. Durable Design: Sealed front panel, molded spill ring, and a stainless steel platform protect the balance from spills and make it easy to keep clean. Multiple Weighing Units: Includes grams, kilograms, pounds, ounces, and a combined pound:ounce display. Switch between units with just the touch of a button. Multiple Application Modes: Enhanced Parts Counting: Allows for recalculating the average piece weight. Percentage Weighing: Ideal for comparing sample weights to a reference weight. Totalization: Allows repeated summation to the limit of the display, not just the capacity of the balance. Display Hold: Perfect for weighing large packages, only available in the Ohaus Scout Pro series. Weigh Below Hook: An integral hook allows for below-balance weighing, critical for density or specific gravity determination. USB/RS232 Connectivity: Features an easy-to-install USB or RS232 interface for quick data connection to a PC or printer, a feature unique to the Ohaus Scout Pro in this price range. Battery or AC Power: Powered by 4 AA batteries, offering up to 40 hours of operation with auto shut-off, or can be powered through the included AC power pack. Physical Lock Switch: The lock switch helps reduce operator error by locking the balance into a specific configuration. Security Bracket and Shipping Lock: Comes with an integral security bracket and a shipping lock to protect the weighing mechanism during transport. Specifications: Maximum Capacity: 4,000 g Readability: 0.1 g Pan Size: 5.6 in x 6.5 in (142 mm x 165 mm) Linearity: ±0.1 g Stabilization Time: 3 seconds Dimensions: 8.3 in x 2.1 in x 7.5 in (210 mm x 54 mm x 192 mm) Dodpexv A S Sofx Ab Newc Weight: 4 lb (1.8 kg) Power Supply: 4 AA batteries or AC adapter (included) Construction: ABS housing with stainless steel platform Units of Measurement: g, kg, oz, lb, lb:oz, t, dwt

Condition: used, This listing is for a Sartorius Combics 3 Balance The unit is in full working condition and is ready for immediate release The Combics 3 is described as a weighing terminal / indicator rather than the weighing pan or scale itself. It is designed to connect to one or multiple load‑cells / scales and manage/control them. Housing: It uses a stainless‑steel enclosure rated IP69K, meaning it is highly resistant to dust and powerful water jets — suitable for very demanding industrial or hygienic environments (food, pharma, chemical production). Djdpfx Aexv Abgeb Njwc Display & Interface: Has a back‑lit graphical LCD display for clarity in industrial conditions. Connectivity/Interfaces: Comes with standard communication ports (for example RS‑232) and various optional ones such as RS‑485, Profibus-DP, Ethernet TCP/IP, Modbus TCP, and analog/digital I/O for integration into automated systems. Multi‑scale support: Capable of managing up to three scales simultaneously. This allows e.g. combining inputs or workflows from multiple platforms. Applications: The terminal supports a number of weighing‑related functions: piece counting, recipe/formulation support (multi‑component weighing), target weight monitoring, classification, dynamic weighing (items in motion), percentage weighing, etc. Traceability & certification: Optional alibi memory (for trace logging of weighing data) is available, supporting compliance requirements (GMP, ISO, ATEX in some cases) for industrial/regulated environments.

Condition: used, This listing is for the Sartorius MSE124S Solent Scales The unit is in full working condition and is ready for immediate use The Sartorius MSE124S Solent Scale is a dependable laboratory balance designed for accurate and consistent weighing in research, education, and industrial environments. Built with precision engineering, it delivers reliable measurement performance for routine laboratory applications. Dwjdpeyypxpsfx Ab Nsc Its robust construction ensures long-term durability, while the clear digital display allows for easy reading of results. The intuitive interface makes operation straightforward, reducing user error and improving workflow efficiency. Ideal for general laboratory weighing tasks, the MSE1245 Solent Scale provides the accuracy and stability expected from Sartorius equipment, making it a practical and cost-effective solution for everyday use

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 3,000 kg, 3 Tone Horizontal Balancing Machine Maximum Rotor Weight ---3000 kg (6613.87 lb) Minimum. Rotor Weight ---30 kg (66.14 lb) Maximum Rotor Diameter ---1400 mm (55.12 in) Minimum Shaft Diameter ---20 mm (0.79 in) Maximum Shaft Diameter ---300 mm (11.81 in) Motor power ---11 kW (14.75 HP) Drive Unit (Std.) ---11 kW (14.75 HP) Balancing Speed ---0-3000 Rpm (25 Hz) (up and down adjustable) Drive Unit --- Only Belt or Shaft / Belt + Shaft Bed length ---3000 mm (118.11 in) Dwedpfx Ajr Dd Avsb Nsc

Condition: good (used), functionality: fully functional, Keyence VHX 700F Measurement Microscope in fully functional condition. - Base unit VHX 700F - Stand VHX-J20 - Objective lens VH-Z20R - Reference object (calibrated glass scale) Dwedpfxsw Ah Axj Ab Njc - User manual Camera Scanning method: Progressive Image sensor: 1/1.8-inch, 2.11 megapixel CCD sensor Total pixels: 1688 (H) x 1248 (V) Effective pixels: 1628 (H) x 1236 (V) Usable pixels: 1600 (H) x 1200 (V) Frame rate: Selectable 15 fps and 28 fps Resolution: 2 megapixels, 1600 (H) x 1200 (V), approx. 1000 TV lines Gain: AUTO, NORMAL, PRESET Electronic shutter: AUTO, MANUAL, OFF, 1/15, 1/30, 1/60, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/5000, 1/9000, 1/19000 Supercharge shutter: 0.2 seconds to 17 seconds adjustable in 0.1 second increments White balance: Auto, Manual, One-touch setting, Preset (2700 K, 3200 K, 5600 K, 9000 K) Back focus adjustment: Not required LCD Monitor: 17-inch color LCD (TFT)*1 Panel size: 365.76 (H) x 228.6 (W) mm*1 Pixel pitch: 0.1905 (H) x 0.1905 (W) mm*1 Number of pixels: 1920 (H) x 1200 (W) (WUXGA)*1 Display colors: Approx. 16,770,000 colors *2*1 Brightness: 270 cd/m² (typical)*1 Contrast ratio: 450:1 (typical)*1 Viewing angle: ±80° (typical, horizontal), ±70° (typical, vertical)*1 Hard Drive 500 GB (including 80 GB reserve capacity) Approx. 2.1 million images (with compression of a 2-megapixel image) or approx. 70,000 images (if 2-megapixel images are uncompressed) Image format JPEG/HD Photo (compressed), TIFF (uncompressed) Viewable image size: 1600 pixels (H) x 1200 pixels (V) Light source: Lamp 12 V, 100 W, halogen lamp Video output: Output format DVI-I, 1920 x 1200 pixels Output Scan frequency

Condition: used, Little used European Spraydry Technologies model 8 - 19 Tall Form Spray 304 stainless steel ATEX rated spray dryer system. Mass balance design capabilities approximately 246kgs feed @ 10% solids with 26kgs Powder @ 5% residual moisture + 220kg/h water evaporated based on Potato Proteins. Inlet temperature 190 deg.c. with exhaust temperature 90 deg.c. Mass flowrate of drying air rated 6,895kg/hr. System includes the following parts: (1) Airco model CHP inlet fan driven by 11kw motor. (1) Lanemark model DB07 propane burner with control panel. (1) Tall form spray dryer chamber with conical base fitted with dislodging hammers fitted to cylinder and cone. Access/inspection doors. Explosion suppression bottles. (1) Stainless steel feed lance with pressure nozzle. (1) 304 Stainless steel product cyclone with explosion suppression bottles. Includes DMN Westinghouse type AL250DairyMZC-11 APS rotary lock value with motor. (1) Exhaust air chamber with explosion suppression bottle. (1) Gough type GBS550 stainless steel vibratory sifter/screen, mounted on stainless steel mobile frame. (1) Feed balance stainless steel vertical vessel. (1) FBF Italia model FBF2004/P High pressure plunger pump. (1) Mettler Toledo type V4-REM industrial flow-though metal detector with Piab conveying system. Dodpfx Ajz D Efneb Nswc (1) Airco type CHP825 exhaust fan driven by 30kw motor. (1) Robbe model Atlas filling machine for bags with controls. Various small scale circulation pumps, pipework, instrumentation and ducting available. System has now been removed from installed production position and ready for loading Specifications: Material Of Construction: 304 Stainless Steel Type Of Spray: Nozzle

Condition: new, Year of construction: 2026, functionality: fully functional, Our most advanced software delivers incredibly sensitive measurements. Only 1.5 seconds to measure. Validation world-wide. Balancing speed - up to 300,000 revolutions per minute. Long lasting mechanical quality. 7/24 online support. 10 pieces of nozzles (28 - 65mm). 25 pieces of flanges. Five-stage oil filtration system. A core oil leak test. Dodpfx Asq Tr R Seb Nowc Automatic air flow control valve. Prevent turbo from running dry by controlling oil pressure and temperature. Energy-saving and cost-saving adapter system. Adapter changeover time is less than 15 seconds. Free online technical support during the warranty period and after the warranty period. Support for spare parts. Required capacity of the air tank 1/2 m³. Colour printer. (Ops) Dremel for grinding. (Ops)

Condition: new, workpiece weight (max.): 3 kg, rotor diameter: 400 mm, rotor length: 300 mm, High-Precision Rotor Balancing for Small Batch Production. The 9A710 balancing machine excels at balancing various rotor designs up to 3 kg. Its exceptional accuracy and high sensitivity allow you to detect and correct even the slightest imbalances. This makes it ideal for single-piece and small-batch production, ensuring smooth operation of your rotors. Key benefits: • High precision: Detects minute imbalances for optimal performance.   • Wide application: Handles diverse rotor designs within the weight limit.   • Simple & reliable: User-friendly design ensures long-term operation. • Increased productivity: Streamlines balancing processes in small-scale settings. Originally designed for small-batch production, the 9A710's versatility makes it a valuable asset in repair shops as well. This machine is perfect for balancing: • Small motors & generators • Shafts for various mechanisms • Impeller fans & pumps • Precision machine tool components • Rotating drive elements ! Upgrade your balancing capabilities and achieve exceptional results with the 9A710. Dwsdpfxsu Urwgj Ab Noc SPECIFICATIONS Weight range of balanced rotors 0.03 - 3 (5) kg Maximum rotor diameter (above the bedding) 400 mm Distance between centres of rotor supports 4 – 300 mm Support type Prisms Transmission element for rotor rotation Belt Minimum achievable residual specific unbalance 0.1 g*mm/kg Rotor speed range 600 – 3000 rpm Electric motor power 0.09 kW Parameters of the supply network 220V, 3 Ph, 50Hz Do you need a machine for a different load capacity, diameter or length? We manufacture balancing machines for every needs. Please contact us to get the best offer! 👇

Condition: used, machine/vehicle number: P21120H01993, Year of construction: 2017, operating hours: 8,479 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 8,255 mm Load capacity: 1,600 kg Fork length: 1,200 mm MACHINE DETAILS Mast type: Triplex mast with full free lift Dimensions & Weight Dimensions (L x W x H): 2,500 x 1,250 x 3,430 mm Own weight: 4,100 kg Year of battery manufacture: 03/2018 Battery voltage: 48 V Battery capacity: 775 Ah Rest voltage: 50.4 V Service valid until: 09/2027 UVV (Occupational Safety) valid until: 09/2027 Operating hours: 8,479 h EQUIPMENT Former Linde full-service unit 3rd auxiliary valve 4th auxiliary valve Dedpfxez Iwr Ue Ab Newc Integrated scale Integrated lifting height indicator Overhead guard LED work light, front LED work light, rear Safety light, front Rear-view camera Side shifter If the mast is too high, it can be disassembled for transport upon request and loaded accordingly. All dimensions are approximate. No guarantee is given for typographical and measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift truck on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 205

Condition: new, workpiece weight (max.): 10 kg, rotor diameter: 250 mm, High-Precision Vertical Balancing Machine for Disk-Type Rotors up to 10kg The 97V10 is a versatile vertical balancing machine designed to efficiently balance disk-type rotors without their own bearing surfaces. Ideal for serial, small-scale, and single-piece production, it ensures optimal performance and reliability of your products. HIGHLIGHTS • High Accuracy: Delivers precise unbalance measurement with an accuracy of at least 4 g∙mm/kg. • Versatile Design: Accommodates a wide range of disk-type rotors, including: - Discs of various designs - Pulleys and flywheels - Fan impellers - Brake discs and drums - Couplings - Pump impellers - Cutting tools • Efficient Operation: - Vertical axis of rotation for quick part replacement and easy access. Dwodju U Nqdepfx Ab Njc - Semi-automatic mode for streamlined operation. - Protective covers and compliance with CE and ISO safety standards. • Flexible Configuration: - Customizable with drilling or milling modules for in-situ unbalance correction. - Available with various spindle fits (cylindrical or tapered) and mandrels. - Options for pneumatic or manual collet chucks and hydraulic jacks for heavy workpieces. SPECIFICATIONS Weight range of balanced rotors 0.1 - 10 kg Maximum rotor diameter 250 mm Maximum rotor height 150 mm Minimum achievable residual specific unbalance 4 g*mm/kg Number of measurable rotor correction planes 1 & 2 Rotor speed range 300 – 1500 rpm Electric motor power 1.0 kW Parameters of the supply network 380V, 3 Ph, 50Hz For more information and to discuss your specific balancing needs, please contact our sales team. We manufacture balancing machines for every needs. Please contact us to get the best offer! 👇

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 20 kg, Maximum Rotor Weight ---20 kg (44.1 lb) Minimum Rotor Weight ---0.5 kg (1.1 lb) Maximum Rotor Diameter ---450 mm (17.72 in) Minimum Shaft Diameter ---5 mm (0.196 in) Maximum Shaft Diameter ---50 mm (1.968 in) Motor Power ---0.75 kW (1.01 HP) Maximum Balancing Speed --- 0 – 8000 RPM (Adjustable) Drive Unit ---Belt Dwedpfx Abjq T Riws Nsc Bed Length ---700 mm (27.6 in)

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 3 h, For inquiries: Zoltán Utasi +36 30 205 7380 Year of construction: 2021 Condition: as good as new (approx. 3 operating hours) Technical specifications Roller carriage length 3200mm Cutting length 3400mm Cutting height max. 155mm at 90°, 105mm at 46° Cutting width width stop 1250mm Saw blade max. Ø 450mm Table size cast iron table top 1200 x 655mm Additional table extension 750 x 655mm Table extension 1430 x 940mm Table height +/-20?mm 900mm Main saw blade speed 3000 / 4000 / 5000 / 6000 rpm Net weight approx. 1150kg Technical description For trimming, cutting to length, formatting, mitre cutting etc. The complete saw shaft unit is dynamically balanced, double-guided swivel segments made of grey cast iron with double column guide for height adjustment and the long circular saw shaft with 2 ball bearings ensure absolutely smooth running. The double roller carriage with ball bearings is smooth-running and maintenance-free. Precise and backlash-free running over the full length, guided by hardened and ground round steel guides with remote locking in a 50 mm grid. Sturdy yet lightweight cross slide made of steel profiles with a support roller on the outer narrow side, cross slide widening on the wide side Length stop on the cross slide with mm scale and telescopic extension extendable up to 3500 mm; with 2 robust and backlash-free sliding stop flaps, 1 end stop with support for long strips; length stop can be used as an angle mitre fence on both sides, infinitely variable from 0° to 46° with mechanical length compensation; all common mitre angles (15°, 22.5°, 30°, 45°) can be quickly set using a fixing system. Electromotive width stop with cutting width 1250 mm to the right of the saw blade, dimension input on the control panel at the top via positioning control to 0.1 mm, stop can be folded down for free table surface; Safety cut-off bar between width stop and roller carriage in case of crushing hazard With pull-out tool drawer Top operation with control panel positioned at eye level, swivelling, incl. Including template holder and with 7" touchscreen control for cutting height, swivelling adjustment and speed Electromotive height and swivelling adjustment via positioning control Swivelling range of the saw blade from 0° - 46° Digital displays for degree setting, cutting height, speed and cutting width APA saw blade quick-clamping system Safety guard can be swivelled to both sides, Protective cover with interchangeable wide/narrow insert Push-button control with electronic soft start (start/stop) Electronic, wear-free motor brake Saw blade Ø 400mm can be lowered under the table Extraction nozzle Ø 120mm on the machine body, Ø 80mm on protective hood CE conformity GS tested Length stop analogue Cross slide standard Cutting length 3400 mm Three-phase motor 5.5 kW Width stop 1250 mm electromotive Scoring unit 1750 0.55 KW (0.75 HP) With manual height and side adjustment via external handwheels externally mounted hand wheels With saw blade quick clamping system APA Quickstep scoring system Tool-free manual adjustment adjustment of the scoring width From 2.8 to 3.8 mm with 0.05 mm grid adjustment Dedpfx Abjq H Sqdj Nowc per single step, incl. 1 Set of saw blades 125 x 2.8 - 3.8 x 50mm | Z = 12+12 Replacement HM scoring saw blade 125 x 2.8 - 3.8 x 50 mm Z = 12+12 (set = 2 pieces) for QuickStep scoring system

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 300 kg, total width: 5,900 mm, Cardan Shaft Balancing Machine Maximum Rotor Weight 300 kg Minimum Rotor Weight 10 kg Dwedozfbh Rjpfx Ab Noc Maximum Rotor Diameter 600 mm Minimum Shaft Diameter 10 mm Maximum Shaft Diameter 140 mm Motor Power 4 kW Inverter Capacity (VFD) 4 kW Maximum Balancing Speed 0 - 1500 RPM (Adjustable via VFD) Drive Unit Belt Drive Bed Length 5900 mm Unbalance Reduction Ratio 98% Machine Total Weight 1400 kg Measurement Sensitivity 1 g·mm/Kg Locating Time 30 - 60 seconds Measuring Unit MBS IBalancer v2.8 Control System Intel-based processor Windows OS

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 1,000 kg, 1 Tone Horizontal Balancing Machine Maximum Rotor Weight --- 1000 kg (2,204.6 lbs) Minimum Rotor Weight ---10 kg (22.05 lbs) Maximum Rotor Diameter ---1400 mm (55.12 in) Minimum Shaft Diameter ---10 mm (0.39 in) Maximum Shaft Diameter ---240 mm (9.45 in) Motor Power ---7.5 kW (10.06 HP) Dwsdpfxoq T Ikle Ab Nec Drive ---7.5 kW (10.06 HP) Maximum Balancing Speed ---0-1500 RPM (25 Hz) (up and down adjustable) Drive Unit ---Belt Drive Unıt / Cardan Possible Bed Length --- 3000 mm (118.11 in)

Condition: used, Weighing station for the food industry The Top Control scale is a professional weighing solution for applications within the food industry. It consists of a colour touchscreen indicator on a stainless steel frame with a weighing platform and product tray. Thanks to its robust construction and user-friendly operation, this machine is suitable for a variety of weighing and packaging processes. Located in Emmeloord, the Netherlands. Immediately available, price on request. Dodpfx Abjz Ndg Us Njwc More photos and full specifications: / Type: Weighing scale / weighing station Indicator: Top Control colour touchscreen Construction: Stainless steel frame with weighing platform and product tray

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 100 kg, Vertical Balancing Machine Max.Rotor Weight 100 kg Dwsdpfx Absylqg Dj Nec Min.Rotor Weight 5 kg Min.Diameter 100 mm Max.Diameter 800 mm Engine Power 5.5 kW

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 6 kg, The H-IRB 6T is a high-precision, belt-driven horizontal balancing machine designed for small rotors and shafts. It combines compact efficiency with industrial-grade reliability. Maximum Rotor Weight 6 kg (13.23 lb) Minimum Rotor Weight 0.1 kg (0.22 lb) Maximum Rotor Diameter 300 mm (11.81 in) Minimum Shaft Diameter 4 mm (0.16 in) Maximum Shaft Diameter 25 mm (0.98 in) Motor Power 0.4 kW (Servo System) Maximum Balancing Speed (Adjustable via potentiometer) 0 – 10,000 RPM Dwedszfbh Dopfx Ab Njc Drive Unit Belt Bed Length 400 mm (15.75 in) Machine Weight 500 kg (1102.3 lb) Min. Achievable Residual Unbalance 0.1 g·mm/Kg Cycle Time 8-30 s Software MBS IBalancer v2.8 Language English Processor Intel-based processor OS Windows 11