Used Balancing Scale for sale (2,823)

Condition: good (used), Sartorious Itsdpod Tw Ixjfx Abgjf Stainless platform scale / balance trolley Stainless mobile platform scale with a Mariotti & Pecini homogenisor attachment

Condition: used, This listing is for an OHaus Harvard Trip 1400/1500 Scales 2-5ib Capacity Mechanical Balance Isdpfxoxv Afle Abgjtf The unit is in full working condition and is ready for immediate release The Harvard Trip series is a precision, mechanical two‑pan (comparative) balance. Its principal use is for comparative weighing (i.e. comparing masses, not simply reading off an absolute weight) — you place an unknown object on one pan and “poise” weights / sliding masses on the other pan until balance is achieved. Because it is mechanical, it requires no external power supply (no battery or electronics). The Harvard Trip balances are known for durability, low maintenance, and long service life.

Condition: used, Microbalance, Laboratory Balance, Precision Balance, Analytical Balance, Scale, Micro Balance METTLER TOLEDO Model XS3DU S/N 1129453969 Part No. 18.11.2.1518.756-1 Year of Manufacture: 2008 Functions: Weighing, Statistics, Formulation, Density, Percentage Weighing, Piece Counting Maximum Capacity: 3.1 g Readability: 0.01 mg Taring Range: 0 … 3.1 g Maximum Capacity (Fine Range): 800 mg Readability (Fine Range): 0.001 mg Repeatability (at nominal load): 6 μg (3 g) Repeatability (fine range at nominal load): 0.8 μg (0.2 g) Linearity Deviation: 10 μg (0.5 g) Corner Load Deviation (test load): 4 μg (1 g) Sensitivity Deviation (test weight): 45 μg (3 g) Temperature Drift of Sensitivity: 0.0001 %/°C Sensitivity Stability: 0.0001 %/a Repeatability (low load): 3 μg (0.2 g) Repeatability, fine range (low load): 0.5 μg (0.2 g) Linearity Deviation: 3 μg (3 g) Corner Load Deviation (test load): 1.2 μg Sensitivity Deviation (test weight): 9 μg (3 g) Minimum Sample Weight (USP): 6 mg Minimum Sample Weight (USP) fine range: 1 mg Minimum Sample Weight (U = 1%, k = 2): 0.6 mg Minimum Sample Weight (U = 1%, k = 2) fine range: 0.1 mg Stabilization Time: 6 s Stabilization Time (fine range): 10 s Interface Update Rate: 23 1/s Draft Shield Diameter: 68 mm Draft Shield Usable Height: 55 mm Weigh Pan Diameter: 25 mm - LCD Touchscreen - RS232C Interface - Printer Type RS-P42 - Tare Function Power Supply: Primary 100 – 240 V AC, 50/60 Hz; Secondary 12 V DC, 2.5 A Itjdpfxowrtbxs Abgef Terminal/Display Unit Dimensions (L x W x H): 285 x 195 x 80 mm Weighing Cell Dimensions (L x W x H): 288 x 128 x 114 mm Printer Dimensions (L x W x H): 210 x 150 x 90 mm Total Weight: approx. 7 kg Good condition

Condition: good (used), Balancing Scale Support surface: 420 x 280 mm Height: 330 mm Disc size up to: 500 mm Distance between roller supports: 135 mm Accessories: 2 mounting arbors, 56 and 68 mm diameter, length 280 mm Condition: good Isdpfx Aoub Tnajbgotf Total weight: 45 kg Scale weight: 37 kg

Condition: new, For sale: Professional MITUTOYO measuring set, manufactured by the renowned Japanese precision measurement systems company. 📦 Set includes: - MITUTOYO AT103 measuring scale - Mitutoyo module / transducer (Part No. 09AAA198) - Signal cables - Flexible cable in metal sheath - Documentation, manuals - Original packaging ⚙️ Data / Information: - Manufacturer: MITUTOYO (Japan) - Model: AT103 - Application: CNC machines, automation, measuring systems - High measurement accuracy - Professional industrial-grade equipment 🛠️ Condition: - NEW – old stock (NOS) - Unused, stored in warehouse - Packaging may show signs of transport/storage 💎 Advantages: Itodoy Agbmepfx Abgef - Original Mitutoyo product – top quality - Complete set ready for installation - Ideal for CNC machinery / automation - Very high precision and durability - Industrial equipment – not a retail-market item 📌 Additional Information: - Sold exactly as shown in the photos - Worldwide shipping available

Condition: used, In this offer you purchase a used "EMC Isilon X400 - 32 TB " Agility and Flexibility: EMC Isilon X-Series is the first scale-out storage solution capable of scaling throughput from a few terabytes to over 20 petabytes and over 100 gigabytes per second (GBps), all within a single file system. Sale item: 1 x EMC Isilon X400 - 32 TB + 400G SSD/ 48G/ 2x10GE SFP + 2x1GE with the following equipment: 3x32 TB HDD/400GB SSD 3.5" 3x48GB Ram, 12X4G 6x6 metre CX42QSFP Hybrid Cable 3x KIT 2SFP + Optic 10GB (ISO00125223, -227, -388) 2x QLogic 18 Port QDR Switch (CNVS491200146, CNVS491200150) 10 GBE, Dual-Port SFP + Without Optic Isilon Software Upgrade Enterprise Snapshot IQ Condition: This offer is for a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been functionally tested and is equipped with the latest Isilon OneFS8 software. Shipping is possible on request! Iodpfxsrxcvds Abgetf

Condition: used, functionality: fully functional, Pall Stax SXLSC02 Lab Scale Chassis. Operating Pressure: 3.5 bar Itjdpfjt U Shgsx Abgef Operating Temp: 60C Good working condition. Please check out our other listings as well.

Condition: used, machine/vehicle number: 684, Load capacity: 1000 kg Graduation reading: 100 g Ijdpfx Absdqw R Rjgstf Platform size: 1250 x 950 mm Platform height above floor: 230 mm Platform height with elevation from the underbody: 540 mm Space required: 1250 x 1160/1250 x 1900/2180 mm Weight: 270 kg

Condition: excellent (used), Mettler Toledo DSC 3 STARe System FRS5+ – Thermal Analysis System (DSC3/500) incl. accessories, PC, and balance Manufacturer: Mettler Toledo Model: DSC 3 STARe System Specification: DSC3/500 Description: For sale is a professional thermal analysis system, Mettler Toledo DSC 3 STARe System equipped with FRS5+ sensor. The device is used for the analysis of thermal material properties via Differential Scanning Calorimetry (DSC). The system comes from a professional laboratory environment and is in well-maintained used condition. The last maintenance by Mettler Toledo was carried out on 08/04/2025; the next maintenance is scheduled for 04/2027. Applications: - Research and development - Quality assurance - Material testing - Analysis of polymers and materials Functions: - Determination of melting points and glass transitions - Analysis of crystallization and phase transitions - Measurement of heat capacity (Cp) - Investigation of reaction kinetics (curing, decomposition) - Purity analysis - Determination of oxidation induction time (OIT) Technical data: - System: DSC 3 STARe System - Specification: DSC3/500 - Sensor: FRS5+ - Furnace power: 200 W - Cooling: air cooled - Lid: Automatic - Power supply: 230 V / 50–60 Hz - Fuse: 6 A - Power rating: max. 600 VA - Software: STARe Software V16.30 - Operating system: Windows 10 Ijdpfx Asy Drl Hjbgjtf - Dimensions (approx.): 60 x 55 x 55 cm - Weight (approx.): 55–65 kg Workstation / PC: - Dell Optiplex control PC with monitor - Windows 10 installed - STARe Software V16.30 Additional equipment: - Thermal analysis package DSC3/500 - DSC 500 accessory kit - Crucible sealing apparatus - Mettler Toledo precision balance (analytical balance) - Weighing range: 42 g / 120 g - Readability: 0.01 mg / 0.1 mg Scope of delivery: - Mettler Toledo DSC 3 main unit - Touchscreen control unit - FRS5+ sensor - Control PC (Dell Optiplex) with monitor - DSC 500 accessory kit - Crucible sealer - Precision balance - Accessories as shown in the pictures - Documentation and training materials - USB sticks / data media Condition: Used, from a laboratory environment, well-maintained. Notice: The scope of delivery is determined by the pictures. The table shown in the photos is not included in the offer. Miscellaneous: Commercial sale. Invoice with VAT available. Inspection possible by appointment. Subject to prior sale and errors.

Year of construction: 2010, condition: used, Crane scale Schenck 1000 kg Itedpfxjiwurgj Abgsf

Condition: used, Year of construction: 1998, workpiece weight 150 kg workpiece length 2500 mm diameter 160 - mm balancing speed variable 100 - 3000 U/min dia. axle journal 160 - 350 mm voltage 400 V total power requirement 1,5 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 7,50 x 1,30 x 1,60 m Control 0,60 x 0,60 x 1,85 m Software TIRA X9000 Operating System Windows XP Software update 2007 Serial No.: R 32/98 Max display sensivitiy: 0.5 gmm Balancing speed 100 - 3000 RPM Itedpfx Aowcg Eljbgsf

Condition: used, This listing is for Sartorius MCA225P - 2S00 - A Cubis Balance. The unit is in full working condition and ready for immediate use. Itjdsyz A Nkspfx Abgsf This premium semi-micro balance offers a 220g capacity and dual-range readability. Features a high-resolution touch display, motorized draft shield, and advanced Q-App software for compliant lab workflows. Ideal for precise analytical measurements in research and quality control environments.

Year of construction: 1993, condition: used, functionality: unexamined, machine/vehicle number: 930426, Our company is offering a Yamato Dataweigh ADW-508 MD multihead weigher from company inventory for sale. Technical specifications (according to manufacturer's data / type): Manufacturer: Yamato Dataweigh Model: ADW-508 MD Design: Multihead combination weigher Number of weighing heads: 8 (with memory function) Weighing range: approx. 8 – 1,000 g Capacity: up to approx. 100 weighings/minute (depending on product) Typical application: food, snack, and packaging industry Condition: Used unit from ongoing operation The unit was last out of operation Itjdpfjy Dqk Uox Abgof Functionality not tested Completeness not guaranteed Sold as seen / in as-is condition Note: Suitable for specialist companies for recommissioning, overhaul, or for spare parts recovery. Terms of sale: Business-to-business sale – without guarantee, warranty, or returns.

Condition: ready for operation (used), Year of construction: 2007, Available immediately from site: CNC vertical balancing machine TIRA, type KV 10, year of manufacture 2007. Rotor mass: 1–10 kg. Rotor height up to 400 mm. Rotor diameter up to 400 mm. Max. balancing speed up to 2,000 rpm. Max. display sensitivity (gmm): 0.5. Drive power: 2.2 kW. Weight: 1,500 kg. Priced at EUR 3,000 plus VAT, ex location. Itedjy Alk Hjpfx Abgof

Condition: used, Spot welding pliers with DALEX RS 17 control unit and balancer Spot welding pliers DALEX Type A 3139 Serial number: 98G 69757 Year of manufacture: 1998 Rated power at 50% duty cycle: 8 kVA Maximum welding power: 22.4 kVA Open-circuit voltage: 2.9 Volts Maximum electrode force: 200 daN Maximum short-circuit current: 9.5 kA Cooling water flow: 1.5 l/min Power supply: 400 Volt, 50 Hz Throat depth: 250 mm Arm spacing: 120 mm Electrode holder diameter: 12 mm Spot electrode diameter: 6/12.5 mm Electrode gap: max. 230 mm - Pliers with water cooling (without cooling unit) - cooling water requirement 1.5 l/min. - Suspension device: DALEX balancer Type D4-21 Weight of welding pliers: 15.5 kg Welding controller DALEX RS 17 LS 5-phase synchronous welding controller with 2 welding programs PAS no.: 0413-410 Serial no.: 41341000278 Year of manufacture: 2006 Operating modes: Single (EP) / Series (SP) Pre-hold time, post-hold time, hold-open time, and pause time: each adjustable 1 – 99 cycles Itedpfx Aoyxrhdobgjf Current time: 0.5 – 9.5; 10 – 99 cycles Welding current: 0 – 99 Skt. Impulses: 1 – 99 Current rise time: 0.5 – 9.5; 10 – 15 cycles Parameter setting via arrow keys - with solenoid valve control - Current adjustment via phase angle control - Welding control unit in steel switch cabinet for wall mounting Total weight: approx. 30 kg Very good condition

Condition: new, Year of construction: 2025, functionality: fully functional, The weighing system is also designed for mixing up to 4 products. Each of the 4 units can be programmed individually. The system can be tested at our test center, 20 km from Frankfurt am Main. Itjdpfx Abjya Ahvegsf Features - Easy operation and cleaning - Convenient control via color touchscreen - Memory for various weighing recipes - Precise weighing results thanks to three-stage weighing: coarse/intermediate/fine dosing, each programmable individually - Tool-free format changeover Technical data - Weighing range: 20g to 4000g - Accuracy: up to 0.5g, depending on product - 6-liter weighing hopper - Max. speed: 60 weighing cycles/minute - Weight: 240kg - Material: stainless steel 304 - Connection: 220V / 50Hz / 6A

Condition: used, Year of construction: 1983, Schenck M480-1/450 High-Precision Dynamic Horizontal Balancing Machine with CAB 690 Control (1983) Speed Range 20-5,000rpm. Maximum Rotor Weight 450kg. Asset No.10_627. S/No. AHG 0459 (1983). Description With Interlocked Guards & 2 Roller Steady Supports. Itsdpfx Abjy Dr Unogjf

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: RMUW 0412, Bed length 3000 mm max. 1500 kg per upright max. diameter 180 mm Itodpfx Aoy A D I Robgof

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, operating hours: 2,802 h, load capacity: 5,000 kg, lifting height: 6,000 mm, free lift: 1,900 mm, load center: 600 mm, fuel type: diesel, mast type: triplex, construction height: 2,800 mm, motor manufacturer: DEUTZ, gearing type: hydrostat, fork carriage width: 1,360 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 200/50-10, rear tire type: superelastic tires (black), rear tire size: 355X50-15, overall weight: 11,850 kg, empty load weight: 6,850 kg, total height: 2,450 mm, total length: 2,350 mm, total width: 2,250 mm, color: green, motor model: TD 2.9 L4, Equipment: CE marking, all wheel drive, lighting, pallet forks, sideshift, 🚜 USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS 📌 Years of Experience | 🛠️ In-house Service Workshop & Paint Shop | 💼 Professional Consultation | 🚚 Own Transport Fleet | 🤝 After-Sales Support Looking for a forklift you can truly rely on? We are a well-known supplier of new and used forklifts with a long-standing tradition, serving clients across Europe – from small enterprises to international production plants. Our forklifts are more than just machines – they guarantee that your logistics will run efficiently and reliably. ⭐ What makes us stand out? ✅ Every forklift undergoes a comprehensive technical inspection (service, testing, replacement of filters and oils, refurbishment of key components) ✅ Full safety inspection (UDT) available on customer request ✅ In-house paint shop & service – machines visually and technically perfected ✅ Europe-wide transport – handled by our own fleet with qualified drivers ✅ Operator training at delivery + functional equipment demonstration at the customer’s site ✅ After-sales service & technical support – always at your disposal ✅ Opportunity to view and test machines at our headquarters – visit us! ✅ Hundreds of satisfied customers across Europe – join those who already trust us ✅ Financing support – cooperation with major leasing companies ✅ Invoices issued in EUR or PLN – according to your preference 🔹 In Offer: COMBILIFT C5000 – Four-way Forklift 📅 Production year: 2020 ⏱️ Operating hours: 2,802 h ⚡ Power: Diesel 🏋️ Capacity: 5,000 kg 🗜️ Mast: Triplex – 6000 mm 🔧 Fork Positioner: 1360 mm | Forks: 1200 mm 🛞 Superelastic Tyres: 100% condition 🛠️ Technical Condition: Excellent – fully serviced ✨ Appearance: Very well maintained, rust-free, ready for work 📏 Free Lift: 1900 mm Dimensions: 📐 Truck Height: 2450 mm 📐 Overall Length: 2350 mm 📐 Width: 2250 mm 📐 Fork Positioner Width: 1360 mm 📐 Overall Height: 2800 mm 🏭 Ideally Suited For: 📦 Warehouses with narrow aisles 🪵 Wood, steel, and pipe industries 📏 Handling of long goods 🏗️ Indoor and outdoor operations Iodey Axfdepfx Abgstf FT Logistics – Quality you can trust. Service you can rely on.

Condition: used, This listing is for the Sartorius MSA225S-1CE-D1 Solent Scales + Cubis MCA623S The unit is in full working condition and is ready for immediate use Itsdpfjyyptgsx Abgsf The Sartorius MSA225-1CE-D1 Solent Scales + Cubis MCA623S combination is a dependable laboratory balance and printer set designed for accurate and consistent weighing in research, education, and industrial environments. Built with precision engineering, it delivers reliable measurement performance for routine laboratory applications. Its robust construction ensures long-term durability, while the clear digital display allows for easy reading of results. The intuitive interface makes operation straightforward, reducing user error and improving workflow efficiency. Ideal for general laboratory weighing tasks, the MSE1245 Solent Scale provides the accuracy and stability expected from Sartorius equipment, making it a practical and cost-effective solution for everyday use

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, operating hours: 2,802 h, load capacity: 5,000 kg, lifting height: 6,000 mm, free lift: 1,900 mm, load center: 600 mm, fuel type: diesel, mast type: triplex, construction height: 2,800 mm, motor manufacturer: DEUTZ, gearing type: hydrostat, fork carriage width: 1,360 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 200/50-10, rear tire type: superelastic tires (black), rear tire size: 355X50-15, overall weight: 11,850 kg, empty load weight: 6,850 kg, total height: 2,450 mm, total length: 2,350 mm, total width: 2,250 mm, color: green, motor model: TD 2.9 L4, Equipment: CE marking, all wheel drive, lighting, pallet forks, sideshift, 🚜 USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS 📌 Years of Experience | 🛠️ In-house Service Workshop & Paint Shop | 💼 Professional Consultation | 🚚 Own Transport Fleet | 🤝 After-Sales Support Looking for a forklift you can truly rely on? We are a well-known supplier of new and used forklifts with a long-standing tradition, serving clients across Europe – from small enterprises to international production plants. Our forklifts are more than just machines – they guarantee that your logistics will run efficiently and reliably. ⭐ What makes us stand out? Itsdpfxjy Ar Rye Abgjf ✅ Every forklift undergoes a comprehensive technical inspection (service, testing, replacement of filters and oils, refurbishment of key components) ✅ Full safety inspection (UDT) available on customer request ✅ In-house paint shop & service – machines visually and technically perfected ✅ Europe-wide transport – handled by our own fleet with qualified drivers ✅ Operator training at delivery + functional equipment demonstration at the customer’s site ✅ After-sales service & technical support – always at your disposal ✅ Opportunity to view and test machines at our headquarters – visit us! ✅ Hundreds of satisfied customers across Europe – join those who already trust us ✅ Financing support – cooperation with major leasing companies ✅ Invoices issued in EUR or PLN – according to your preference 🔹 In Offer: COMBILIFT C5000 – Four-way Forklift 📅 Production year: 2020 ⏱️ Operating hours: 2,802 h ⚡ Power: Diesel 🏋️ Capacity: 5,000 kg 🗜️ Mast: Triplex – 6000 mm 🔧 Fork Positioner: 1360 mm | Forks: 1200 mm 🛞 Superelastic Tyres: 100% condition 🛠️ Technical Condition: Excellent – fully serviced ✨ Appearance: Very well maintained, rust-free, ready for work 📏 Free Lift: 1900 mm Dimensions: 📐 Truck Height: 2450 mm 📐 Overall Length: 2350 mm 📐 Width: 2250 mm 📐 Fork Positioner Width: 1360 mm 📐 Overall Height: 2800 mm 🏭 Ideally Suited For: 📦 Warehouses with narrow aisles 🪵 Wood, steel, and pipe industries 📏 Handling of long goods 🏗️ Indoor and outdoor operations FT Logistics – Quality you can trust. Service you can rely on.

Year of construction: 1990, condition: excellent (used), 1 piece mass balancer for creel. With complete accessories and attachments. Itjdpjfm Ev Refx Abgsf Little been in use.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, input voltage: 220 V, Equipment: documentation/manual, Microscopic 3D inspection scanner with measurement envelope of 1.6 x 1.2 x 0.8mm, height resolution 0.1 µm. The unit can take linear measurement in 3 dimensions and also measure edge radius between approximately 5µm and 100µm. It is complete with laptop loaded with the necessary software, dongle, and microscope stand. It has only been lightly used. Itjdpfx Absx Ekuiogef

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: RFVD 0018, Used fully fuctional Schenck RoTec Distec Balancing Machine The machine comes with original foundation drawings, documentation and manuals. The machine can be test run in Kerava. Technical data: - Max. rotor diameter: 500 mm - Max. rotor height: 150 mm Itjdjyxwmlopfx Abgjf - Max rotor weight: 30 kg (option for 70 kg) - Countinuously variable balancing speed: 600-1000 1/min - Measurement uncertainty: 4 gmm - CAB 870 touchscreen operation - Automatic drilling unit - Weight approx: 2200 kg - Space requirement approx: W1200 x D2700 x H1900 mm

Condition: used, overall dimensions 750x650x770 mm; capacity about 200 kg/24h; with hopper; power supply 230 V, 50 Hz, 8 A; power 940 W; refrigerant R404a, 0.6 kg; weight ±95 kg. Hopper LxWxH 750x860x1100 mm; capacity 200 kg; Isdpfx Aeyx Szqsbgstf weight ±100 kg.