Used Counter for sale (2,578)

Year of construction: 2000, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 68370, SMB Technik Multima 9R/9L/3K automatic beer bottling monobloc for rinsing, counter-pressure filling and crown capping of glass bottles. The machine was previously in operation at a Norwegian brewery. Following the sale and removal of the labelling machine, an electric motor is required to drive the bottling line. The electric motor is not included in the sale. The SMB rinsing, filling and capping monobloc was operational prior to this change and can be inspected at its current location in Norway. CONFIGURATION * 9-station bottle rinser * 9-head counter-pressure filler * 3-head crown capper * Automatic bottle transfer through rinsing, filling and capping sections * Conveyor sections * CO₂ counter-pressure / isobaric filling * Long-tube bottom-up filling * Separate bottle pressurising and return-gas system * Automatic filler bowl level and pressure control * High-pressure injection / jetter before capping * Electrically interlocked safety doors * Automatic bottle presence monitoring FILLING PROCESS The Multima is designed for bottling beer in glass bottles. Bottles are rinsed before being transferred to the filling section. Before filling, the bottles are pressurised, normally using CO₂. Beer is then filled from the bottom through long filling tubes. The system uses separate channels for bottle pressurising gas and return gas and is designed to minimise turbulence, foaming and oxygen uptake. After filling, the bottles pass a high-pressure injection device (jetter), which produces controlled foaming to help displace air from the bottle neck immediately before crown capping. Lodoz Dhrqjpfx Ancoag TECHNICAL DATA Manufacturer: SMB Technik GmbH, Mannheim, Germany Model: Multima 9R/9L/3K Year: 2000 Serial number: 68370 Electrical supply: 400 V / 50 Hz Current: 12 A Container: Glass bottles Product: Beer Closure: Crown caps Filling principle: Counter-pressure / isobaric Rinser: 9 stations Filler: 9 filling valves Capper: 3 heads A 400 V to 230 V converter is included in the sale. DOCUMENTATION Extensive original SMB technical documentation is available, including operating instructions, setup and adjustment procedures, bottle changeover information, cleaning and sanitising procedures, maintenance and troubleshooting information, as well as filling-valve technical documentation. IMPORTANT The labelling machine has been sold separately and is NOT included. An electric motor is required to operate the bottling line and is NOT included. Tanks and other brewery equipment visible in the photographs are not included unless specifically agreed. The machine is located in Norway and can be inspected by appointment. Dismantling, loading and transport can be discussed separately.

Year of construction: 2024, condition: like new (used), functionality: fully functional, Sure. Below is a technical and commercial description suitable for product presentations, catalogs, or proposals: ### Mertmakina Mattress Packaging Machine with Integrated Quality Control System Lasdpfx Anoz Dk Arocsg The Mertmakina mattress packaging machine is an industrial solution designed to automate and optimize the mattress packaging process, ensuring speed, uniformity, and quality in the final product packaging. The equipment integrates a quality control system, allowing for the monitoring of key stages in the packaging process and the identification of potential anomalies before the product leaves the line. #### Key Features * Automatic mattress feeding and positioning, ensuring a continuous and regular process. * Automatic packaging system, adapted to the dimensions and characteristics of different mattress models. * Control of the application and sealing of the packaging, ensuring a uniform and consistent finish. * Integrated quality control system, designed to verify process parameters such as positioning, packaging integrity, and proper sealing. * Error and anomaly detection, with the possibility of signaling or automatic rejection of units that do not meet the defined parameters. * Intuitive operating interface, allowing the operator to monitor the machine's status, adjust parameters, and consult process information. * Recording and monitoring of production and control data, contributing to traceability and continuous improvement of production. * Robust industrial construction, suitable for operation in continuous production environments. * Increased productivity and reduced manual intervention, while simultaneously reducing variability between packages. ### Integrated Quality Control The integration of quality control transforms the machine into a more complete production and inspection system. Each mattress can be monitored during the process, allowing verification of whether the packaging has been correctly applied and whether the product meets the previously defined parameters. When a condition outside the established limits is detected, the system can generate an alert for the operator and, depending on the installed configuration, automatically direct the product for inspection or rejection. In this way, the solution helps to reduce packaging errors, increase the consistency of the final product, improve traceability, and reduce waste. ### Result The Mertmakina mattress packaging machine, equipped with an integrated quality control system, provides a solution focused on automation, productivity, standardization, and process control, enabling companies to increase the efficiency of the production line and ensure a consistent final presentation of the mattresses.

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, production capacity: 6,000 unit/h, The machine is operating flawlessly and has been under continuous Quadient maintenance. The latest service report from December 2025 is attached! TECHNICAL DETAILS Processing speed max.: 6,000 items/hour Document speed max.: 6,000 documents/hour Monthly volume max.: 300,000 filled envelopes/month Package thickness max.: 10 mm Package thickness for minimum clearance: less than 3 mm Minimum clearance in the depth direction with package thickness less than 3 mm: 6 mm Minimum clearance in the width direction with package thickness less than 3 mm: 16 mm Package thickness for increased clearance: 3–6 mm Minimum clearance in the depth direction with package thickness 3–6 mm: 12 mm Minimum clearance in the width direction with package thickness 3–6 mm: 19 mm Envelope hopper capacity up to C5 max.: 800 pieces Envelope hopper capacity C4 max.: 500 pieces Envelope weight up to C5 min.: 70 g/m² Envelope weight above C5 min.: 90 g/m² Envelope weight max.: 110 g/m² Refilling possible during operation Envelope width min.: 225.5 mm Envelope width max.: 330 mm Envelope depth min.: 98.5 mm Envelope depth max.: 254 mm Flap length min.: 32 mm Flap length max.: 65 mm Envelope neck depth min.: 10 mm Envelope neck depth max.: 25 mm Minimum opening in the neck area: 70 mm Flap shoulder angle: 50–90° Lodezzqabepfx Ancsag Neck angle: 5–20° MACHINE DETAILS Counter reading: 3,617,695 Voltage: 230 V AC Frequency: 50 Hz Fuse for envelope inserting head: 6.3 A Operating temperature: 18–28 °C Relative humidity: 30–80 % EQUIPMENT Tower feeder with 2 stations CIS reading Datamatrix reading Inserter for inserts up to A4 Enveloping module Output conveyor Conversion with C4 float switch Gluing possible with distilled water Matching base cabinet

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, paper weight (max.): 208 g/m², paper width (max.): 350 mm, paper height (max.): 500 mm, production capacity: 4,500 unit/h, No minimum price – guaranteed sale to the highest bidder! Auction of a brochure production line! TECHNICAL DETAILS Gathering towers Models: Horizon VAC-100a / VAC-100m Number of towers: 2 Stations per tower: 10 Feeder system: Air suction feeder Voltage: 230 V Frequency: 50 Hz Current draw: 10.4 A per section Booklet making and folding module Model: Horizon SPF-200A Voltage: 230 V Lodpfxezy Hhxe Ancsag Frequency: 50/60 Hz Current draw: 3.4 / 3.2 A Booklet making heads: 2 Brochure thickness: up to 4.5 mm Functions: Wire stitching and center folding Front trimmer Model: Horizon FC-200A Function: Automatic front trimming Operating mode: Inline operation with Horizon SPF-200A Cutting quality: High-precision cut Stacking unit Model: Horizon ST-40 Voltage: 230 V Frequency: 50 Hz Current draw: 4.7 A Function: Automatic stacking of finished brochures Production capacity: max. 4,500 brochures/h Feeder stations: 10, expandable to max. 60 Sheet format max.: approx. 350 × 500 mm Paper weight: 52–208 g/m² Booklet thickness: max. 2 mm for saddle stitching Processing: Gathering, stitching, folding, and stacking in one system MACHINE DETAILS Production counter: approx. 1,800,000 brochures EQUIPMENT Horizon VAC-100a gathering tower Horizon VAC-100m gathering tower Horizon SPF-200A booklet making and folding module Horizon FC-200A front trimmer Horizon ST-40 stacking unit Data sheets for the individual components of the system, including further detailed technical data, can be found in the appendix.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 35,000 h, travel distance X-axis: 1,140 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 810 mm, controller manufacturer: MITSUBISHI, controller model: M720 SSS, table load: 850 kg, spindle speed (max.): 15,000 rpm, number of axes: 5, This 5-axis Pinnacle BX300A was manufactured in 2012. It features a spindle speed of 15,000 rpm, a table size of 1300 × 610 mm, and a 24-position tool magazine. Equipped with a Mitsubishi M720VS control system, it supports complex machining with continuous rotation on the C-axis and tilting on the B-axis. Consider the opportunity to buy this Pinnacle BX300A vertical machining centre. Contact us for more information about this machine. Additional equipment • Air blast through spindle Ledpfx Ajz Ea Sxjncsag • Rotary table with counter-support and hydraulic lock – 360° rotation • Heidenhain linear scales on X, Y, Z axes; rotary encoders on A and C axes • Coolant through spindle, 20 bar + low-pressure cooling system • Renishaw OMP60 workpiece probe + receiver // Renishaw TS27R tool probe • Chip flushing system • Chain-type chip conveyor • Telescopic covers for X, Y, Z axes • Full machine enclosure with safety door lock • Central lubrication system with oil cooler Machine Benefits Qualitative Machine Benefits • Condition: very good, low operating hours • Ready for tests Technical Machine Benefits • B-axis (tilting head): –120° to +120° • C-axis (rotary table): 360° continuous rotation • 24-position drum-type tool magazine • Table size: 1300 × 610 mm Extra Information Additional equipment Work area lighting Signal tower Air and coolant guns MPG handwheel Electrical cabinet cooling with air conditioner Temperature control system for spindle and ball screws Coolant oil separator Maintenance tool set

Year of construction: 2025, condition: new, functionality: fully functional, the Seamark XC1000 X-Ray Component Counter: Smarter, Faster, and Fully Automated At Active-PCB Solutions, we know that accuracy, efficiency, and seamless integration are not optional, they’re an essential part of our manufacturing process. That’s why we’re excited to introduce our new Seamark XC1000 X-Ray Component Counter which has just been installed on our shop floor by Advanced Manufacturing Solutions Ltd. The next-generation offline X-ray component counting system is designed to redefine how we manage and verify our SMD component inventory. You can find out more about this new technology and how we intend to put it to full use below! Introducing the Seamark XC1000 X-Ray Component Counter Precision Counting Powered by AI Leveraging an advanced AI algorithm, this intelligent Seamark XC1000 X-Ray Component Counter system provides 99.99% counting accuracy for all SMD components sized 01005 and above, meaning we can say goodbye to manual errors and time-consuming reel unpacking. The XC1000 counts 1 to 4 reels simultaneously with no unspooling, no guesswork, and no downtime. Ergonomic Design Meets Automation The XC1000 features an ergonomically designed workstation where the operator can sit comfortably and monitor the easy-to-read counter screen. With an automated stage movement system and anti-pinch safety design, reel handling is simple, safe, and efficient. The unit is compact and mobile, thanks to built-in wheels for easy relocation. Smart Labeling and Real-Time Integration Mislabeling and manual input errors are inevitable and costly. However, with its error-proof labeling function, the XC1000 automatically detects and recognises each reel, instantly printing the correct label via a TSC industrial printer. This intelligent workflow is further enhanced by seamless real-time integration with MES, ERP, and WMS systems, enabling live data exchange and automatic result uploads. Built for the Modern SMT World The XC1000 is built to handle the full range of reel sizes (7”–15”), heights (5–80mm), and component types, including moisture-proof bag packaging, bulk materials, and JEDEC trays. Its amorphous silicon flat panel detector delivers sharp, high-resolution images with a 430mm × 430mm field of view, supported by four optional cameras for automatic barcode reading. Industry-Leading Database & Cloud Intelligence What sets the Seamark XC1000 X-Ray Component Counter apart is its dynamic, global X-ray component database, which includes: Lasdpsyzpkzofx Ancsg 15,000+ material profiles 60 million+ testing images 700,000+ core reference images Weekly updates with 160,000 new images Over 8.6 million classification training images This continually evolving database ensures compatibility with 99.2% of global components. Updates are cloud-synced monthly, keeping the whole system current and reliable. Key Technical Specs at a Glance Input Power: 220V, 10A, 50–60Hz Control System: Windows 10 64-bit X-Ray Source: Sealed microfocus (30–80KV, up to 1000 μA) Detector: 3072×3072 matrix, 139μm resolution Max Output Power: 56W Counting Speed: Fully automated, operator training not required.

Year of construction: 2021, condition: excellent (used), ELECTA refrigerated display case models: ELECTA 100, ELECTA 200 (corner unit), ELECTA 250 (meat) sections for meat, poultry, and processed meats Ljdpfxszz Shgo Ancoag PINK LED and CRIOLED lighting electronic controllers complete set of partition walls, cash register terminal, and corner element designed for professional product display. The display cases consist of 4 segments: 1 display case 315 cm, 2 display cases 315 cm, 3 display case 187 cm, 4 display case 80 cm (corner unit). The equipment has been in use for 5 years.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, For Sale — Buhrs B5000 Paperwrapper (2015) — Only 11,055,783 cycles, up to 24,000 pph Model: Buhrs B5000 paper wrapping / mailing system Year: 2015 Total cycles: 11,055,783 (low usage — counter photo attached) Rated speed: up to 24,000 packages per hour Condition: Very good and fully operational; clean mechanics and controls; maintained on schedule Location: USA Included: Complete integrated system : Rotary feeder, automatic product loader/conveyor for rotary feeder products, gathering section, PPU ( product positioning unit ) wrapping section, eject station, product discharge conveyor, Buhrs data controller, Domino k600i inkjet, Nordson Blue 7 glue system with 2 heads and 2 hoses, manuals. Additional feeders/conveyors can be discussed during inspection. Inspection: Available under power by appointment; video test available on request. Logistics: Professional dismantling/packing and worldwide shipping can be arranged. Shipping is extra — within the US estimated at USD 2,000; to a major European port estimated at USD 3,000 (final quote depends on destination). Terms: EXW USA by default. Bank wire; 100% prior to loading into a truck or sea container. Location: Wisconsin, USA Availability: Immediately Lodjxdn Nrspfx Ancjag Ownership: Direct sale from Himin Industries Inc., not brokered Asking price: €139,000 — ONO — price without VAT (export sale) Export sale from USA – no VAT charged by the seller. Local VAT and import duties, if any, are payable by the buyer in his country. Machine was used in a clean and climate-controlled environment and is in excellent mechanical and optical condition. We can assist with international shipping, crating, and export documentation. Video and inspection available upon request. Direct sale by owner. No brokers. Serious inquiries only.

Year of construction: 2019, condition: used, functionality: fully functional, machine/vehicle number: 460923-80034645-001, This is an under-counter refrigeration unit from the manufacturer NordCap, which is perfectly suited for installation under existing cooking ranges or grill stations. The unit was manufactured by the premium manufacturer Ideal. The under-counter refrigeration unit features a built-in stainless steel evaporator and is equipped with 4 full-extension drawers. The usable height is 90 mm per drawer. Two identical units are available for sale. The unit has been inspected in our in-house workshop and is fully functional. The unit was only used for 6 months and was stored due to the business closure. Condition: very good (used). The list price is €5,500 net. You will receive an invoice with VAT shown. Our used equipment service for you: * 6 months warranty on all electrical parts, limited to the replacement of defective parts, excluding installation and removal costs Laedszu Sapspfx Ancsg * High-quality brand-name equipment at fair prices * Professional overhaul/inspection & expert cleaning * Inspected & fully functional - or money back * Shipping or self-collection can be flexibly selected * Competent advice - before and after purchase * Provision of operating instructions, connection diagrams & spare parts * Inspection according to DGUV V3 Technical data: * W x D x H: approx. 1380 x 660 x 410 mm * Power connection: V: 230 / kW: 0.265 * Serial number: 460923-80034645-001 * Year of manufacture: 2019 Condition: used, inspected, fully functional Shipping: * Delivery or self-collection by arrangement * Worldwide shipping on request * Shipping to islands or mountain stations only by arrangement Do you have any questions, would you like to receive advice or would you like to see something on site? You can reach us by telephone during our opening hours: Monday to Friday from 9:00 a.m. to 1:00 p.m. and from 2:00 p.m. to 5:00 p.m. Subject to changes and errors. The sale is exclusively subject to our general terms and conditions (GTC), which can be found under the link "Legal Information".

Condition: like new (used), Year of construction: 2020, functionality: fully functional, turning length: 543 mm, turning diameter: 310 mm, spindle bore: 51 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 190 mm, travel distance Y-axis: 42 mm, travel distance Z-axis: 652 mm, spindle motor power: 11,000 W, rotational speed (max.): 5,000 rpm, total height: 1,915 mm, total length: 2,632 mm, total width: 1,814 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 30 m/min, overall weight: 5,800 kg, spindle nose: A2-6, For sale is a Hardinge Talent 51 MSY, manufactured in 02/2020, in like-new and fully functional condition. This CNC turning center is designed for the precise and flexible complete machining of demanding turned parts and features a main and counter spindle, a Y-axis, and driven tools. The machine is equipped with a FANUC 0i-TF Manual Guide i control system. The main spindle has an A2-6 spindle head, a maximum speed of 5,000 rpm, and a rated power of 11 kW with a maximum torque of 165 Nm. The maximum bar diameter is 51 mm, the maximum machining diameter is 310 mm, and the maximum turning length with a collet chuck is 543 mm. The counter spindle is equipped with an A2-5 spindle head and reaches a maximum speed of 6,000 rpm. The travel distances are 190 mm in the X-axis, 652 mm in the Z-axis, and ± 42 mm in the Y-axis. The rapid traverse rate is 30 m/min in both X and Z, and 10 m/min in Y. The tool turret has 12 stations, VDI 30, and driven tools. The machine's equipment includes, among other things, a swiveling chip conveyor, a parts catcher with a conveyor belt, RENISHAW tool measurement, a coolant supply with 20 bar pressure, internal coolant through the turret, a signal light, a double foot switch, a transformer, and a central automatic lubrication system. The machine dimensions are 2,632 mm in length (without chip conveyor), 1,814 mm in depth, and 1,915 mm in height. The machine weight is 5,800 kg. Thanks to the combination of counter spindle, Y-axis, and driven tools, the Hardinge Talent 51 MSY is particularly suitable for versatile machining tasks and the efficient production of complex workpieces. Lajdpfoz D Su Nex Ancjg

Condition: ready for operation (used), Year of construction: 2010, operating hours: 30,343 h, travel distance X-axis: 600 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis CHIRON Mill 2000 was manufactured in 2010. It features a Siemens 840D NC control and a robust main spindle motor by Siemens. The machine has a total of 3,129,425 tool changes, showcasing its efficiency in production. If you are looking to get high-quality machining capabilities, consider the CHIRON Mill 2000 vertical machining centre we have for sale. Contact us for further details. Ljdpfx Aoz Eai Roncsag - Operating Hours (Main Switch On): 67,030 h 12 min- Operating Hours (Machine Fully Switched On): 45,945 h 26 min- Operating Hours (Automatic Production Mode): 30,343 h 56 min- Main Spindle Running Hours: 18,096 h 58 min- Total Tool Changes: 3,129,425- NC Control Manufacturer: Siemens- NC Control Type: 840D- Main Spindle Manufacturer: Fa. Chiron- Main Spindle Motor Manufacturer: Siemens- Main Spindle Motor Type: 1 PM 6105-2 LZ 84-9 EM 1-Z- 4th Axis Manufacturer: Fa. Peiseler- 4th Axis Type: ZAS160- 4th Axis Counter Bearing: Peiseler GP MK3- 5th Axis Manufacturer: Fa. Peiseler- 5th Axis Type: ZAS160- 5th Axis Counter Bearing: Peiseler GP MK3 - Substructure (Base Frame) Manufacturer: Hamül- Substructure (Base Frame) Type: L- Machine Structure Manufacturer: Chiron- Hydraulics Manufacturer: FMB- Hydraulics Type: 3116265- Cooling Unit (Chiller) Manufacturer: Hyfra- Cooling Unit (Chiller) Type: VWK90-D0- Central Lubrication Manufacturer: SKF- Central Lubrication Type: KAF1-M-W-S3+924- Control Cabinet Cooler Manufacturer: Rittal- Control Cabinet Cooler Type: SK3304142- Extraction System Manufacturer: Umwelttechnik 99- Extraction System Type: LCF-3000- Fire Extinguishing System Manufacturer: Total Walther- Fire Extinguishing System Type: (UE-03)K8- Coolant System 2 Manufacturer: Bürener Maschinenfabrik- Coolant System 2 Type: 001300000170- Chip Conveyor Manufacturer: Knoll- Chip Conveyor Type: 750K-1150/- X-Axis Motor Manufacturer: Siemens- Tool Magazine Chain Motor Manufacturer: Siemens- Tool Magazine Chain Motor Type: 1 FT 6034-4 AK 71-3 EA 1- Tool Magazine Linear Motor Manufacturer: Siemens- Tool Magazine Linear Motor Type: 1 FK 7063-5 AF 71-1 EH 2- Chip Conveyor Screw Motor Manufacturer: Bauer- Chip Conveyor Screw Motor Type: BS04-71V/D06LA4

Condition: used, This listing is for a Pharmagraph S1816 Particle Counter (1 of 9) Lsdpfjxtnqujx Anceag The unit is in full working condition and is ready for immediate release. The S1816 series is a continuous-monitoring airborne particle counter designed for use in pharmaceutical cleanrooms, isolators, filling suites and similar controlled environments. It is built by Pharmagraph (UK) and intended to meet stringent regulatory/clean-room requirements (e.g., for EU GMP Annex 1 compliance). The unit houses a laser-based sensor (in particular a Met One 6015 sensor) in a stainless-steel enclosure, intended for permanent monitoring rather than portable spot checks

Condition: ready for operation (used), Year of construction: 2022, operating hours: 1,729 h, spindle speed (max.): 4,500 rpm, spindle motor power: 15,000 W, overall weight: 3,700 kg, controller manufacturer: FANUC, controller model: FANUC 0i-TF, number of axes: 3, This 3-axis Goodway GLS-2000LYS was manufactured in 2022. It features a spindle speed of 4,500 rpm and a robust 12-station driven turret. The machine includes an 8" hydraulic chuck with a bar capacity of 65 mm and a 5" sub-spindle. If you are looking to get high-quality turning capabilities, consider the Goodway GLS-2000LYS horizontal turning machine we have for sale. Contact us for further details. • CNC control: FANUC 0i-TF (10.4" display with Manual Guide) • Working hours: 17,29H 24M 34S (operating time); Part count: 10,250 • Main spindle chuck/collet: 8" hydraulic cylinder, Bellegrandi BA70 collet chuck group (bar capacity 65 mm) • Sub-spindle: 5" sub-spindle with hydraulic cylinder and ejector, Bellegrandi BA70 collet chuck group • Axes: C-axis (main & sub-spindle with disc brake), Y-axis • Turret: 12-station driven turret • Tool presetter: Renishaw HPRA manual presetter • Coolant pump: 7 bar / 3 bar M-code switchable pump and Grundfos 3/4 HP pump • Power supply: AC 380 V, 3-phase, 50/60 Hz • Nominal capacity: 30 kVA • Main breaker current: 50 A Additional equipment • Chip conveyor with timer • Bar feeder (included) • 20x Bellegrandi BA70 collets • Driven tool holders: 4 double axial driven tools, 2 radial driven tools • RS232 interface • Electrical cabinet heat exchanger Lodpsz D E Ipsfx Anceag Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: used, Year of construction: 2015, functionality: fully functional, total height: 3,500 mm, total length: 5,900 mm, total width: 4,000 mm, SW Swabian Machine Tools BA W08-22 CNC control system: Siemens SINUMERIK 840 D sl Work area X-axis: 800 mm Y-axis (swiveling): 900 mm (1,200 mm) Z-axis: 660 mm Spindle distance, fixed (variable)*: 800 mm (799 mm - 851 mm) Workpiece clamping Swiveling table/counter bearing with helical gearing: swiveling time 0/180°: approx. 5.0 s A- and U-axes, prepared for mounting of clamping bridges, up to max.: Ø 950 mm x 1,830 mm Drive system: Torque motor Transport load: 2 x 800 kg Speed range A-, U-axes: 1 - 40 min-1 Working spindle HSK-A80 Speed range: 1 - 12,500 min-1 Acceleration time 0 - nmax: < 0.9 s Spindle bearing diameter: 90 mm Power / torque (10% duty cycle): 2 x 42 kW / 2 x 200 Nm (10% duty cycle) Ledpfsz D Ey Esx Ancoag Feed drive Drive system: Linear motor Rapid traverse X / Y / Z: 120 m/min Axis acceleration X / Y / Z: 11 / 11 / 22 m/s2 Max. feed force X / Y / Z: 2 x 8,000 / 16,000 / 2 x 8,000 N Accuracy Position measurement: Direct, absolute Position tolerance X / Y / Z: Tp = ≤ 0.006 mm Repeatability R (ISO 230-2) ≤ 0.004 mm Tool magazine Tool changing system: Pick-Up Capacity: 2 x 42 (2 x 70 / 2 x 91 / 2 x 126)* Max. tool Ø: 85 / 200 mm (-o-) Max. tool length: 550 mm Max. tool weight: 12 / 18 kg Tool change chip-to-chip time: approx. 3.00 s Weight / Dimensions Machine weight: approx. 24,000 kg Transport dimensions W x H x D: 4.00 m x 3.5 m x 5.70 m Installation dimensions W x H x D: 5.35 m x 4.20 m x 8.20 m Connection power Operating voltage: 3 x 400 Volt, 50 Hz, TN-S/TN-C network Total connection power: approx. 152 kVA Average air consumption: 0.6 Nm³/min (5.5 bar) Several machines are available. The machines were integrated into an automated system. They were loaded by a robot system. They were connected to a central coolant system. Therefore, these machines do not have their own coolant system. Chips were also removed via a central disposal system.

Year of construction: 2020, condition: ready for operation (used), A large-format CNC twin-spindle vertical turning machine WMZ is available. Travel X1/X2: 2950mm/2650mm, travel X: 5600mm, travel Z1/Z2: 3200mm/2830mm, feed rate X: 32m/min, feed rate Z: 20m/min, max. workpiece diameter: 3800mm, max. swing in working area: 4000mm, min. workpiece diameter 4-axis internal machining/external machining: 1250mm/1500mm, min. workpiece diameter 2-axis internal machining: 450mm. Table speed: 100rpm, tool stations: 2x47, tool interface: Capto C8, max. tool diameter: 120mm, max. tool length: 400mm, max. tool weight: 20kg, spindle power: 240kW/202kW. Machine dimensions X/Y/Z: approx. 15600mm/10350mm/5750mm, control: Siemens Sinumerik 840D sl. Documentation available. An on-site inspection is possible. Lajdpfx Anjzgwyleceg

Year of construction: 2020, condition: ready for operation (used), A large-format CNC twin-spindle vertical turning machine WMZ is available. Travel X1/X2: 2450mm/2750mm, travel Z1/Z2: 2700mm/2300mm, max. workpiece diameter: 2800mm, max. swing diameter in the working area: 3000mm, min. workpiece diameter for 4-axis external machining/internal machining: 1250mm/1500mm, min. workpiece diameter for 2-axis internal machining: 450mm, rotary table speed: 230rpm, feed rate X: 32m/min, feed rate Z: 20m/min, B-axis speed: 150rpm, spindle power: 33kW, tool stations: 2x47, tool interface: Capto C8, max. tool diameter: 120mm, max. tool length: 400mm, max. tool weight: 20kg. Machine dimensions X/Y/Z: approx. 9350mm/8600mm/5700mm, control system: Siemens SINUMERIK 840D sl. Documentation available. An on-site inspection is possible. Lajdpfx Anjzgwyxocjg

Condition: ready for operation (used), Year of construction: 2011, operating hours: 9,337 h, bar diameter (max.): 20 mm, controller manufacturer: FANUC, controller model: 31i Model A, number of axes: 9, This 9-axis TSUGAMI HS207 CNC Swiss-type sliding head lathe was manufactured in 2011. It features a maximum bar diameter of 20 mm and includes a Fanuc 31i Model A CNC control. The machine is equipped with a simultaneous B-axis, Y-axis for sub-spindle tooling, and comes with an FMB 3-36 bar feeder. If you are looking to get high-quality turning capabilities, consider the TSUGAMI HS207 machine we have for sale. Contact us for further details. • Simultaneous B-axis • Y-axis for sub-spindle tooling • Max. bar diameter: 20 mm • Connection/preparation for mist extraction system • Low operating hours Additional equipment • FMB 3-36 bar feeder • Chip conveyor • Parts conveyor • High-pressure oil pump • Fire suppression system Lasdpfx Ajz D Hnkjnceg Technical Specification Counter Spindle No

Year of construction: 2015, condition: like new (used), functionality: fully functional, Refrigerated display counter for cured meats and cheeses. Brass finish. White countertop in Corian. Length 260 cm, width 128 cm. Compressor not on board as it is remotely installed. Ljdsyla Nhspfx Ancjag

Year of construction: 2008, condition: ready for operation (used), Main spindle: max. bar capacity: 65mm, draw tube bore: 75mm, collet holder diameter: 160mm, centering chuck diameter: 175mm, spindle nose: 140mm, max. speed: 5000/min, nominal torque (S1): 150Nm, nominal power (S1): 22kW. Counter spindle: draw tube bore: 45mm, centering chuck diameter: 175mm, spindle nose: 140mm, max. speed: 5000/min, nominal torque (S1): 100Nm, nominal power (S1): 16.8kW. W2 axis counter spindle: travel: 690mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. X1 axis: travel: 165mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. Z1 axis: travel: 220mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. X2 axis: travel: 165mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. Z2 axis: travel: 150mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. X3 axis: travel: 165mm, max. speed: 40m/min, max. acceleration: 10m/s², nominal thrust (S1): 2400N. Z3 axis: travel: 678mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. Y3 axis: travel: 80mm (+50/-30), max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. Workpiece unloading (UA-WA): max. unloading weight: 4daN, max. unloading diameter: 70mm. Total number of tool stations: 12, tool holder diameter: 30mm, driven positions: 12, max. speed of driven tools: 4000/min, nominal torque (S1-n = 0/min): 17Nm, nominal power (S1-n = 4000/min): 2.9kW, control: Siemens 840D, operator panel: ErgoLine, screen: color TFT 19 inch, number of spindles (C-axes): 2, number of axes: 10, number of channels: 4. Operating hours: 70,035h power on, 48,657h in production, machine operates with cutting oil. With documentation and Bar Loader FMB Turbo 8-80 XT 3200. An on-site inspection is possible. Lajdpfxjyln Eke Anceg

Condition: used, functionality: unexamined, machine/vehicle number: 04010428, Racal 2461-CD universal timer/counter Laedpexr Dkbjfx Ancsg

Condition: used, Year of construction: 2011, Three knife trimmer Kolbus HD 143.P Year: 2011 For three side trimming of book blocks and brochures, used as an individual machine or as a unit within book production lines. Counter: 12.560.000 books Description: - Co-Pilot with touchscreen - Right hand infeed - Counter stacker - Cut counter - Exchangeable cutting tables (standard set): (4-18) - Knife pre-setting device - Set of knife holders: 2 Lasdpfez Eaq Ijx Ancsg - Sets of knives: 2 Max. mechanical speed: 7.500 single products/hour or 4,200 single products/hour from 40 mm product thickness on Maximum size (cutted): 305 x 420 x 80 mm Minimum size (cutted): 100 x 100 x 2 mm Maximum size (uncutted): 320 x 450 x 80 mm Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: like new (used), Year of construction: 2015, operating hours: 18,000 h, machine/vehicle number: IntNr231671, CNC Swiss-type lathe STAR SR32JN, new, manufactured in 2015 Lodsz Dwubepfx Ancoag Control system, manufacturer: Fanuc, series 32i-B, 7 axes (X/Z/Y/C1/X1/Z1/C2), Bar diameter max. 32 mm, Turning length max. 80 mm, Main spindle, speed max. 7,000 rpm, C-axis 0.001 degrees, Counter spindle diameter max. 32 mm, Counter spindle speed max. 7,000 rpm, C-axis, Tool holder for a total of 23 tools (linear tool holder, front tool holder, rear machining), Coolant pump with increased flow rate Parts conveyor belt, Mayfran chip conveyor, Bar feeder magazine FMB turbo 3-36/3200 / A / accessories for short-turning The machine can be inspected under power by appointment. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: ready for operation (used), Year of construction: 2009, spindle speed (max.): 4,000 rpm, travel distance X-axis: 225 mm, travel distance Z-axis: 680 mm, spindle motor power: 26,000 W, total height: 2,000 mm, total width: 2,050 mm, overall weight: 6,600 kg, product length (max.): 2,800 mm, number of axes: 3, This 3-axis Mazak QT NEXUS 300 was manufactured in 2009. It features a maximum cutting diameter of 420 mm and a maximum swing of 680 mm. The machine is equipped with a drum turret with 12 stations and a maximum spindle speed of 4,000 rpm. If you are looking to get high-quality turning capabilities, consider the Mazak QT NEXUS 300 horizontal turning machine we have for sale. Contact us for further details. • CNC: Mazatrol Fusion 640T Nexus (8.4" color LCD) • CE marked • Capacity • Max bar diameter: 77 mm • Max cutting diameter: 420 mm • Max swing: 680 mm • Spindle bore: 88 mm • Spindle center height: 1,080 mm • Max chuck workpiece weight: 450 kg • Main spindle • Max spindle torque: 600 Nm • Spindle nose: A2-8 • Chuck: 10" through-hole, type B210A815X • Axes • Cutting feedrate: X 8 m/min, Z 8 m/min • Rapid traverse: X 30 m/min, Z 25 m/min • Turret • Type: Drum turret • Stations: 12 • Turning tool shank: 25 × 25 mm • Indexing time: 0.8 s (½ turn), 0.2 s (single step) • Tailstock • Programmable, motor-driven movement • Stroke: 645 mm • Taper: No. 5 • Dead centre included • Live centre: NSK LC-5SW (speed up to 4,000 rpm) • Thrust selection: 10 levels • Control equipment and functions • Mazatrol Fusion 640T Nexus • Interfaces: RS-232C, Network • Background tool-path check • Machining Navigation – Prediction / Monitor / Results • Velocity and feedrate control • Tool path storage • 3.5" FDD unit • Coolant / machine equipment • Complete coolant system (tank 210 L, pump 520 W) • Preparation for side chip conveyor • Automatic tool eye • Hydraulic chuck pressure interlock • Chuck open/close confirmation • Double foot switch • Full chip and coolant guarding • Work light • Electrical • Power requirement (30 min rating): 49.69 kVA • Continuous power requirement: 43.83 kVA Laodpfsz Eavwsx Ancog Additional equipment • European-market power transformer • Foundation plates • One set of adjusting tools • Manuals included Technical Specification Driven Tools No Counter Spindle No

Year of construction: 2014, condition: used, Empty weight: 4 kg Length: 78 cm Serial number: 22220 V251403 5-axis machining center comprising: - a NAKAMURA lathe, TYPE: NTMX, year: 2014, 5-axis dual-spindle + milling head. - a SAMSYS+ bar feeder, Model: M3000, year: 2014 - an LNS YOSHIDA chip conveyor Technical specifications: - capacity: - max turning diameter: 200 mm - Max turning length: 780 mm - Distance between centers: max 980 mm / min 210 mm - Bar capacity: 51 mm on both left and right - Chuck size: 165 or 210 mm - Axis travel: - X1/X2 slide travel: 570 mm / 130.5 mm - Z1/Z2/B2 slide travel: 1,297/658/770 mm - Y-axis travel: ±100 - Left/right spindle: - Speed: 5,000 rpm - Tool spindle: - Speed: 12,000 rpm - Tool type: CAPTO C4 - Number of tools in magazine: 24 - Max. tool diameter: 60 mm - Max. tool length: 180 mm - Max. tool weight: 4 kg - Indexing range: 190° - Turret: - Type: 12-sided drum turret - Number of indexing positions: 24 - Square tool size: 20 mm - Round tool size: 20 mm diameter - Spindle speed: 6,000 min⁻¹ - Floor dimensions: L 4,225 mm x W 3,015 mm x H 2,650 mm - Approximate machine weight: 14,500 kg Hours on the counter: approximately 3,622 h Sold with 1 cabinet and 2 workbenches, including contents Online auction held following the closure of the "Supadis" production facility in Le Plessis-Pâté (91), a company specializing in precision machining. This sale includes more than 100 lots, notably several 3-, 4-, and 5-axis CNC machining centers from “Matsuura,” “OKK,” “Biglia,” and “Nakamura Tome,” as well as a “Kasto Functional A” automatic saw. The lot also includes grinding machines, a “Cincinnati” column drill press, “Trimos” and “Mitutoyo” measuring columns, as well as numerous tools, workbenches, and inspection equipment. The sale also includes stocks of raw materials (steel, aluminum, titanium, “Inconel,” “PEEK,” copper, etc.), workshop equipment, compressors, shelving, and various material-handling equipment. Sale organized by Dome Auctions France, OVV No. 331-2026, auctioneer Blandine Camper. The online auction opens Tuesday 18 August and closes Thursday 24 September. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 22 September Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online... Laodpfxszvccdo Anceg

Condition: ready for operation (used), Year of construction: 2023, operating hours: 1,809 h, total width: 2,000 mm, total height: 1,800 mm, overall weight: 1,650 kg, controller manufacturer: SIEMENS, controller model: S7 with SIMATIC HMI Touch Panel, product length (max.): 2,400 mm, Circular Metal Saw manufactured in 2023. This PRESSTA EISELE PROFILMA 502 features a powerful 7.5 kW saw drive with a maximum saw blade speed of 2,850 rpm. It offers a cutting capacity of 270 x 150 mm and a maximum profile width of 270 mm. The machine includes a Siemens S7 control system with a touch panel for enhanced operation. If you are looking to get high-quality cutting capabilities, consider the PRESSTA EISELE PROFILMA 502 machine we have for sale. Contact us for further details. Technical Specifications • Saw Drive Power: 7.5 kW (7,500 W) • Duty Cycle: S6 • Saw Blade Speed: Max. 2,850 rpm • Power Supply: 400 V, 3-phase, 50 Hz • Current Consumption: 16 A • Operating Pressure: 6–8 bar Cutting Capacity • Maximum Cutting Width: 270 mm • Maximum Cutting Height: 150 mm • Maximum Cutting Diameter: 270 mm • Maximum Round Material Capacity (90°): 190 mm • Maximum Profile Width: 270 mm • Section Length Range: 3–4,000 mm • Minimum Remnant Length: From 75 mm (depending on profile) Saw Blade • Saw Blade Diameter: Ø550 mm • Saw Blade Bore: Ø40 mm Control System • PLC: Siemens S7 • HMI: SIMATIC Touch Panel • Controller: CPU 315 • Safety System: Flexisoft • Functions: • Piece counter • Batch multiplier for bundle processing • Cycle time display • Chain dimension management • Fault diagnostics Connectivity Ledpozi S R Rsfx Anceag • Remote Access: IXON router with VPN connection Material Feed System • Drive Type: Electronic servo drive • Feed Stroke: 800 mm • Drive Mechanism: Ball screw spindle • Maximum Profile Length: 4,000 mm • Feed Support: Lift/lower roller support Saw Feed • Feed Type: Motorized • Feed Adjustment: Stepless • Cutting Direction: Bottom to top Clamping System • Type: Pneumatic horizontal and vertical clamping • Clamping Position: Feed and discharge sides • Pressure Control: 6 individual pressure regulators Lubrication • Lubrication Type: Intermittent spray system • Reservoir Capacity: 1 L • Features: • Level monitoring • Automatic shut-off Safety Features • Complete safety enclosure • Sound-insulated machine frame • Automatic machine shut-off at end of material stock • Cutting gap extension to protect cut surfaces Material Support • Infeed Conveyor: 740 mm roller conveyor with intrusion guard • Outfeed Table: 450 mm Pertinax support table with intrusion guard Extraction • Extraction Ports: 2 × Ø100 mm Chip Extraction Unit • Model: MG 3 (Italyvacuum Vortex 58 FT) • Year of Manufacture: 2022 • Motor Power: 3 kW • Voltage: 400 V / 3~ (±5%) • Current Consumption: 7.2 A • Weight: 130 kg • Features: • Integrated cyclonic separation system • Contactless antistatic system Additional Information • Machine can be inspected under power.