Used Counter for sale (2,488)

Year of construction: 2008, condition: ready for operation (used), Main spindle: max. bar capacity: 65mm, draw tube bore: 75mm, collet holder diameter: 160mm, centering chuck diameter: 175mm, spindle nose: 140mm, max. speed: 5000/min, nominal torque (S1): 150Nm, nominal power (S1): 22kW. Counter spindle: draw tube bore: 45mm, centering chuck diameter: 175mm, spindle nose: 140mm, max. speed: 5000/min, nominal torque (S1): 100Nm, nominal power (S1): 16.8kW. W2 axis counter spindle: travel: 690mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. X1 axis: travel: 165mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. Z1 axis: travel: 220mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. X2 axis: travel: 165mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. Z2 axis: travel: 150mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. X3 axis: travel: 165mm, max. speed: 40m/min, max. acceleration: 10m/s², nominal thrust (S1): 2400N. Z3 axis: travel: 678mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. Y3 axis: travel: 80mm (+50/-30), max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. Workpiece unloading (UA-WA): max. unloading weight: 4daN, max. unloading diameter: 70mm. Total number of tool stations: 12, tool holder diameter: 30mm, driven positions: 12, max. speed of driven tools: 4000/min, nominal torque (S1-n = 0/min): 17Nm, nominal power (S1-n = 4000/min): 2.9kW, control: Siemens 840D, operator panel: ErgoLine, screen: color TFT 19 inch, number of spindles (C-axes): 2, number of axes: 10, number of channels: 4. Operating hours: 70,035h power on, 48,657h in production, machine operates with cutting oil. With documentation and Bar Loader FMB Turbo 8-80 XT 3200. An on-site inspection is possible. Csdpfxjyln Eko Ak Asri

Condition: used, This listing is for 1 of 2 Handilaz Mini Particle Counter The unit is in full working condition and is ready for immediate use Key Features Simultaneous Particle Counting: Sizes and counts particles in three fixed channels (0.3 µm, 0.5 µm, 5.0 µm) High Sensitivity: Detects particles from 0.2 µm to 10 µm, with resolution down to 10 nm Flow Rate: Consistent 0.1 CFM (2.83 L/min) with quiet pump and internal flow control Power Options: Can be powered via direct supply or portable with four high-capacity, quick-change, rechargeable NiMH AA batteries Data Management: Stores up to 10,000 samples Five distinct sampling modes CSV export via USB or SD card Codpoxhf Tisfx Ak Ajri Data output through RS-232C or RS-485 Includes data download software Display & Interface: Touchscreen with one-button operation for ease of use Build Quality & Compliance: Diode laser light source ISO 21501-4 calibrated Includes IQ/OQ (Installation/Operation Qualification) documentation Extras: Compounding procedure templates provided Applications Cleanroom Certification: ISO 14644-1 certification and re-certification ISO classification for cleanrooms Routine Monitoring: Point-of-use particle measurements Ongoing cleanroom surveillance for compliance Contamination Troubleshooting: Locating local particle sources Verifying filter performance Filter & Leak Testing: Efficient detection of filter leaks and performance validation Compounding: Suitable for pharmaceutical or sterile compounding operations using pre-designed templates

Condition: used, This listing is for theStuart SC6 Colony Counter The unit is in full working condition and is ready for immediate use The Stuart SC6 Colony Counter is an electronic device designed to streamline and improve accuracy in counting bacterial or fungal colonies on Petri dishes. Here’s what it offers Key Features Pressure-sensitive counting: Place a Petri dish on the built-in pad, tap a colony with a felt-tip pen or probe, and it registers a count on the digital display (0–999), with an optional audible beep Average count facility: You can count multiple plates, and the device automatically calculates averages and standard deviations Adjustable pad sensitivity: Customize the tap sensitivity via a dial to prevent miscounts Viewing options: Features bright, glare-free LED lighting with the option to switch backgrounds (light or dark) to enhance colony visibility Csdpfxsxhfyve Ak Aori BioCote® antimicrobial coating: The surface is treated with silver-based antimicrobial protection for enhanced hygiene

Condition: ready for operation (used), Year of construction: 2022, operating hours: 3,709 h, spindle motor power: 5,500 W, spindle speed (max.): 6,500 rpm, overall weight: 2,750 kg, total width: 1,440 mm, total height: 1,760 mm, bar diameter (max.): 35 mm, travel distance Y-axis: 340 mm, controller manufacturer: FANUC, product length (max.): 2,060 mm, number of axes: 5, This 5-axis Hanwha XE35H was manufactured in 2022. It features a maximum turned diameter of 35 mm and impressive axis travels, including 312 mm in X (2) and 340 mm in Y. The machine is equipped with a maximum main spindle speed of 6500 rpm and a tool capacity of 21. If you are looking to get high-quality turning capabilities, consider the Hanwha XE35H swiss type turning machine we have for sale. Contact us for further details. • Maximum turned diameter: 35 mm • Axis travels: • X1: 62 mm • X2: 312 mm • Z1: 210 mm • Z2: 205 mm • Main spindle: • Power: 2.2/5.5 kW • Sub spindle: • Max speed: 6500 rpm • Power: 1.5/2.2 kW • Number of tools: 21 Credpfxs Ahq Aaj Ak Aoi • Tool shank: 16 x 16 mm • Cross slide speed: 6000 rpm • Cross slide power: 1.0 kW • Coolant tank capacity: 170 litres • Coolant pump power: 0.4 kW • Power consumption: 15 kVA • Air flow rate: 120–150 litres/min Technical Specification Counter Spindle Yes

Condition: used, This listing is for a Pharmagraph S1816 Particle Counter (1 of 9) The unit is in full working condition and is ready for immediate release. The S1816 series is a continuous-monitoring airborne particle counter designed for use in pharmaceutical cleanrooms, isolators, filling suites and similar controlled environments. Cjdpfx Ajxtnqusk Ajri It is built by Pharmagraph (UK) and intended to meet stringent regulatory/clean-room requirements (e.g., for EU GMP Annex 1 compliance). The unit houses a laser-based sensor (in particular a Met One 6015 sensor) in a stainless-steel enclosure, intended for permanent monitoring rather than portable spot checks

Condition: ready for operation (used), Year of construction: 2018, operating hours: 25,500 h, travel distance X-axis: 160 mm, travel distance Z-axis: 510 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 840D-sl, number of slots in tool magazine: 24, number of axes: 8, This 8-axis EMCO Hyperturn 45 was manufactured in 2018. It features dual water-cooled integrated motor spindles with a maximum bar capacity of 45 mm and a powerful drive power of 15 kW for each spindle. The machine includes two 12-station radial tool turrets and a high-pressure coolant system. If you are looking to get high-quality turning and milling capabilities, consider the EMCO Hyperturn 45 turn-mill centre we have for sale. Contact us for further details. Cjdpfxe Ahzcis Ak Aori - CNC Control: Siemens Sinumerik 840D-sl / OPERATE with 22" Multi-Touch Display, emcONNECT, IPC with 240 GB, and ShopTurn dialog programming- Operating Hours (Machine on): 25,304 h 09 min 43 sec- Operating Hours (Ready for operation / automatic mode): 22,788 h 54 min 36 sec- Operating Hours (Production mode): 21,003 h 11 min 32 sec- Total Alarm Time: 2,625 h 48 min 54 sec- Number of Spindles: 2 (Water-cooled integrated motor spindles for main and counter spindle)- Drive Power (Main Spindle): 15 kW- Drive Power (Counter Spindle): 15 kW- Speed Range (Main Spindle): 0 - 7,000 rpm- Speed Range (Counter Spindle): 0 - 7,000 rpm- Spindle Nose (Main Spindle): DIN 55026 KK 5- Maximum Bar Capacity: 45 mm- Spindle Nose (Counter Spindle): DIN 55026 KK 5- Axes: 6 linear axes, 2 rotary axes (C-axis on main and counter spindle, TRANSMIT software included)- Y-Axis Travel: mm- Y-Axis Rapid Traverse Rate: 15 m/min- Tool Carriers: 2x 12-station radial tool turrets VDI 25 with directional logic (for up to 2x 12 driven tool stations)- Driven Tools Power: max. 4 kW at 2,080 rpm- Driven Tools Torque: 16 Nm constant- Driven Tools Speed Range: 0 - 6,000 rpm- Linear Scales: Absolute direct linear encoders (HEIDENHAIN) with sealing air on X1, Y1, and X2 axes- Workpiece Handling: Pneumatic finished-part catcher HT45 (max. part length 120/180 mm, max. part diameter 45 mm, max. weight 2 kg) with indexed conveyor belt (storage area 340 x 750 mm)- Spindle Extension: For DM45, including 3 reduction tubes (allows short bars up to 1,200 mm through the spindle)- Mist Collector: Mechanical oil mist separator REVEN (RECOJET-2), air throughput 1,000 m³/h, 250 W, connection diameter Ø160 mm- Electrical Connection: 3x 400V / PE, 50/60 Hz, Imax = 60 A, Supply line fuse 80 A gG/gL, Icw

Condition: good (used), CE King TB4 Tablet counter Crsdpsy Ax Ncofx Ak Aoi Stainless, electronic tablet or capsule counter, two channel, product hopper with top cover and vibration frequency control of product onto the feed chute, mounted on slat chain conveyor 3000mm x 100mm, fills up to 30 containers per min, 3Ph

Condition: used, This listing is for a Merck Millipore Scepter 3.0 Automated Cell counter The unit is in full working condition and is ready for immediate release The Scepter™ 3.0 Cell Counter is the only automated cell counter that's both portable and handheld. This compact device brings the accuracy and consistency of Coulter impedance counting directly to your culture hood, eliminating the need for bulky benchtop equipment. While traditional automated counters rely on vision-based systems, object recognition software, manual focusing, and clunky loading chambers, the Scepter™ 3.0 avoids all of these issues. It offers true automation without the risk of human or software error. Featuring a microfabricated, precision-engineered sensor, the Scepter™ 3.0 handles all aspects of cell assessment and calculation, delivering accurate and reliable counts in under 30 seconds. Features: Handheld, portable, and ergonomic design Uses the Coulter Principle for precise, reproducible results Cjdpfx Akjxv D Dpo Aeri Compatible with two sensor sizes (40 μm and 60 μm) Displays cell concentration, average size, average volume, and histograms Stores up to 999 counts for PC download and further analysi

Condition: used, Niggestich VA Gastronomy Counter 3 heated water baths / bain-maries a = W x D x H 30 x 50 x 21 cm + additional water bath Tray storage Dimensions: H x W x D = 90 x 233 x 110 cm Cjdpfxju Egn Rs Ak Aeri Inlet and outlet levers for the water baths Refrigerated drawers and a refrigerated compartment (without refrigeration unit) Please inquire about shipping/freight costs. Shipping/freight costs depend on quantity, weight, dimensions, and postal code. You can find more items – new and used – in our shop!

Condition: like new (used), Year of construction: 2025, functionality: fully functional, MAZAK INTEGREX i-250H S U1000 Max. machining diameter: 670 mm Max. machining length: 1,011 mm Max. milling speed: 12,000 RPM Max. spindle speed: 5,000 RPM Max. bar diameter: 65 mm!!! Machine is equipped with: - CNC control: Mazatrol SmoothAi - Tool magazine for 74 tools (CAPTO) - KITAGAWA three-jaw chuck for main spindle, diameter 210 mm - KITAGAWA three-jaw chuck for 2nd spindle, diameter 210 mm - Tool Eye - Y-axis - B-axis 0.0001° (swiveling head) - C-axis (main spindle) input accuracy 0.0001° Crodpfo Ah Dx Aox Ak Aoi - Counter spindle with full C-axis - Main spindle with spindle bore 65 mm - Interface for bar loader magazine - 5-axis machining package for SmoothAi - Tailstock function, counter spindle!!! - Preparation for MAZAK Monitoring System B - Chip conveyor - KNOLL KSS compact filter system - Approx. 80-85 pieces of CAPTO tool holders!!! * Like new, with only approx. 350 machining hours!!! * IMMEDIATELY AVAILABLE

Condition: excellent (used), Year of construction: 2014, Universally applicable frame and long-hole drilling machine Specifically designed for window construction and universal use with pneumatic height adjustment. Double-hole drilling on two levels in a single setup. Motor power 1.5 kW Motor start with a practical handle switch. Equipped with a two-jaw chuck, 1 - 20mm, by Röhm. Pneumatic adjustment of the processing height, allowing dowel drilling on two levels without re-adjustment. The desired drilling heights can be set for each drilling level using a digital counter. Switching between levels is then performed pneumatically from the front. Cross adjustment 430mm, stepless or in a 12mm grid. Maximum height adjustment approx. 100mm above the table height. Drilling stroke approx. 150mm. 2 pneumatic workpiece clamps. Grid rail for quick adjustment laterally in a 12mm grid. Stop for length adjustment during long-hole milling. 2 swiveling workpiece supports. Special stop system approx. 3.1m long with swiveling stops. Removable special stop with centering via a lever mechanism for different ladder rung widths, uprights, etc. Dust extraction funnel. Center stop. Side stop. Drill head mount. Laser. Operating manual. CE marking. A few minor paint touch-ups. Almost new condition, see original photos. Credpfxe Aa A Eqj Ak Aei Dimensions approx. 1500 x 900 x 1400mm (LxWxH), weight 300kg. The machine can be demonstrated on-site after prior appointment. We only offer machines that are readily available for demonstration in our warehouse; see "other offers from this provider."

Condition: ready for operation (used), Year of construction: 2012, overall weight: 3,500 kg, bar diameter (max.): 32 mm, controller manufacturer: FANUC, controller model: Series 31i-MODEL A, number of axes: 7, This 7-axis DOOSAN Puma ST32G was manufactured in 2012. It features a maximum machining diameter of 32 mm and includes a main spindle with a Z1/C1 axis. The machine is equipped with 6 turning tools and 4 driven cross-machining tools, providing versatile capabilities. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma ST32G swiss type turning machine we have for sale. Contact us for further details. - Completely overhauled in 2022- Maximum Machining Diameter: 32 mm- Number of Axes: 7 (X1, Z1, C1, Y, X2, Z2, C2)- Main Spindle (Front Side): 1, Z1 / C1 Axis- Turning Tools (Front Side): 6 pieces (12 x 12 x 120)- Cross-Machining Tools (Front Side): 4 pieces (ER16) driven- Tool Holders (Front Side): 4 pieces (ER16M) driven- Sub-Spindle (Rear Side): 1 piece, X2 / Z2 / C2 Axis- Rear Tool Holder: 2 fixed tools and 2 driven tools- Deep-Hole Drilling: 2 tools- CNC Control Unit: FANUC Series 31i-MODEL A- Power Supply: AC 200/220V, 3 Phase, PE, 50/60 Hz- Rated Power: 21.04 kW- Interrupting Current: 5.0 kA- Full Load Current: 33.18 A- Short Circuit Current: 10.0 kA- Circuit Diagram Version: ST20H31AA09- Machine Weight: 3,500 kg- Optional Equipment:Profluid High-Pressure Coolant System (Model: PFMF-7015-S4)Bar feeder FMB TURBO 3-36 / 3200 (2012) Technical Specification Counter Spindle Yes Credpfe Ahzbdox Ak Aji

Condition: used, Blanco food serving station with glass structure Blanco food serving station with refrigerated display case 40 mm Bianco Berrocal granite countertop Front panel with beech veneer Cedpfx Akoi Tvqhs Ajri Tray/plate slide Power connection: 230 V With lighting Dimensions: Width: 254 cm Depth: 80 cm Depth with plate slide: 110 cm Height: 190 cm Information about cooling: Without compressor unit / refrigeration unit Centrally cooled for connection to an external refrigeration system Last inspection: 09/2022 You can find more food serving stations – new and used – in our shop! International shipping costs available upon request!

Condition: defective spare-parts repository (used), functionality: not functional, HAKO cleaning machine, sweep-and-vacuum machine Designation: HAKO B1100 Drive: ELECTRIC Condition: see photos / NOT OPERATIONAL / FOR DIY ENTHUSIASTS Item No.: B 1100 Manufacturer: HAKO Year of manufacture: unfortunately not identifiable Operating hour counter: reads "unfortunately not identifiable" Electric operation (Charger is not included in this offer) New price approx. €49,900 Price applies for collection from warehouse 47441 Moers Various cleaning and scrubbing machines in stock Crede Ahpwzjpfx Ak Aei We offer the item as shown in the pictures. Inspection is expressly offered. General: We offer various items here, which we describe as accurately as possible and include informative photos. No further information on the item can be provided. If required, the item can be taken away immediately. Unless explicitly stated, this offer is for USED GOODS. We offer the item as shown in the pictures. All offers are ex warehouse 47441 Moers. If you require shipping, please contact us to discuss packaging and shipping costs. (Shipping costs are approximately €650 net, depending on the distance) All dimensions are approximate.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 22,008 h, spindle motor power: 52,000 W, spindle speed (max.): 2,500 rpm, travel distance X-axis: 650 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 2,050 mm, total height: 2,670 mm, total width: 4,215 mm, overall weight: 24,000 kg, controller manufacturer: SIEMENS, controller model: Sinumerik 840D sl, product length (max.): 7,601 mm, number of slots in tool magazine: 12, swivel angle B-axis (min.): -119 °, swivel angle B-axis (max.): 120 °, number of axes: 7, This 7-axis DMG CTX gamma 2000 TS was manufactured in 2011. It features a maximum turning diameter of 700 mm and a turning length of 2,000 mm. The machine includes impressive X1-axis travel of 650 mm and Z1-axis travel of 2,050 mm. If you are looking to get high-quality turning and milling capabilities, consider the DMG CTX gamma 2000 TS turn-mill centre we have for sale. Contact us for further details. • Working area + axes travels: • Swing diameter: 700 mm • Maximum turning diameter: 700 mm • Maximum turning diameter opposite spindle/tool holder: 400 mm • Spindle distance: 2,260 mm • Turning length: 2,000 mm • X1-axis travel: 650 mm • Y1-axis travel: +/- 200 mm • Z1-axis travel: 2,050 mm • B1-axis travel: +/- 120 degrees • X2-axis travel: 210 mm • Z2-axis travel: 1,910 mm • Z3-axis travel: 1,910 mm • Main Spindle: Integrated motor spindle ISM 102 Plus: • Clamping cylinder diameter: 630 mm • Inner draw tube 104 mmDraw tube diameter: 104 mm • Spindle bore diameter: 118 mm • Front bearing diameter: 180 mm • Maximum spindle power (100% / 40% ED): 40 / 52 kW (53.6 / 69.7 hp) • Maximum spindle speed: 2,500 rpm • Maximum torque (100% / 40% ED): 1,700 / 2,200 Nm • C-axis angular resolution: 0.001 degrees • Sub-Spindle: Integrated motor spindle ISM 102 Plus: power 40/52 kW, torque 1700/2200 Nm, max speed 2500 min-1, inner draw tube 104 mm, C-axis and hydraulic brake, lower support (Z3) • Tool Magazine: Disc magazine with 36 stations (max tool diameter 80 mm, max length 400 mm, max weight 10 kg) • Milling Spindle: Power 13.2/22 kW (100/40% ED), HSK-63A clamping, Speed Max 12000 min-1, Torque 60/100 Nm (100/40% ED) • Tool turret: 12-position star turret with driven tools, VDI 40 mm, lower cross slides (X2, Z2) with AC servo drives • Power Consumption / Supply: 100 kVA, 400V (±10%, N, PE), 50 Hz, 160 A fuse • Machine Dimensions (LxWxH): 7601 x 4215 x 2530 mm (without external cooling unit) • ADDED OPTIONS: • Automation: Automatic sliding door for workspace (Landert) • Workpiece measuring system Renishaw • Cooling and Chip Removal: Coolant system 8/20 bar (980 l tank, 40 µm band filter, 4.5 kW heat exchanger), outer chuck flushing for main and sub-spindles, chip flushing pistol, mechanical oil mist extractor (1100 m³/h, H13 filter) • Shaft Machining Equipment: Tailstock function for sub-spindle (250-1200 daN), steady rest on turret head (SR-3.1-ZSW, clamping Ø25-165 mm) Credpo Ah E Ecefx Ak Aji • Spindle Clamping: Power-operated shaft chuck (SMW W 260-3-A08), dual clamping cylinder SMW, face driver with fixed center point, torque support for milling spindle, angular drilling head 90° (Benz), 4-color signal light, unstable grid package, higher ambient temperature package • Sub-Spindle Clamping: Power-operated chuck for shaft machining with retractable jaw holder (type W 260-3-A08, manufacturer SMW, including A8/Z220 reduction flange), dual clamping cylinder for shaft machining chuck (SMW, surcharge to standard cylinder), face driver in workpiece-dependent design with fixed centering point and power-operated driving pins for shaft machining chuck • Software & Powertools: DMG Messenger, DMG Netservice (VPN), 3D data model of workspace (Step/IGES), DMG programming software for PC with Windows XP Pro, Shopturn 840D with CAD-Reader Technical Specification Counter Spindle Yes Driven Tools Yes Taper Size HSK 63 Through-spindle Coolant Yes

Condition: ready for operation (used), Year of construction: 2015, operating hours: 6,872 h, spindle motor power: 7,500 W, spindle speed (max.): 7,000 rpm, overall weight: 4,300 kg, total width: 1,440 mm, total height: 1,865 mm, bar diameter (max.): 65 mm, controller manufacturer: FANUC, controller model: Series 31i-MODEL B5, product length (max.): 3,320 mm, number of axes: 11, This 11s STAR MICRONICS SV-38R type B was manufactured in 2015. It features a maximum turning diameter of 38 mm and a maximum headstock stroke of 350 mm. The machine is equipped with a FANUC Series 31i-MODEL B5 CNC control and offers rapid traverse speeds of up to 30 m/min. If you are looking to get high-quality turning capabilities, consider the STAR MICRONICS SV-38R type B swiss-type CNC sliding-headstock automatic lathe we have for sale. Contact us for further details. Codo Agmnzspfx Ak Asri • Axis diagram: X1, Y1, Z1, X2, Y2, Z2, X3, Y3, Z3, B3, C1, C2 • Machining capacity: • Max turning diameter: 38 mm • Max headstock stroke: 350 mm • Rapid traverse: X1/X2/X3/Y1/Z1/Z2/Z3 30 m/min; Y2 20 m/min; Y3 15 m/min • Main spindle: • C-axis control • Motor power: 7.5 kW continuous / 11 kW (10 min, 25% duty) • Main spindle collet • Synchronous rotary guide bush with air blow • Sub-spindle: • Max speed: 7,000 rpm • C-axis control • Motor power: 5.5 kW continuous / 7.5 kW (10 min, 40% duty) • Sub-spindle collet • Air blow • Tooling system: • 5-position gang tool post • 10-position tool turret • 8-spindle back-working unit • Front drilling: 3 tools per station • Max drilling diameter: 23 mm • Max tapping capacity: M16 × 2.0 • Driven tooling: • Gang tool post: 4 driven positions; max speed 6,000 rpm; motor 2.2 kW • Turret: 2 driven tools per station; max speed 5,700 rpm; motor 2.7 kW continuous / 4 kW (5 min, 30% duty) • Max drilling diameter (driven): 10 mm • Max tapping capacity (driven): M8 × 1.25 • Built-in/standard equipment: • Cut-off tool breakage detection • Automatic central lubrication • Hydraulic unit • Pneumatic unit • Coolant level indicator • Leak detection switch • Work area lighting • RS-232C interface Additional equipment • Bar feeder: FMB Maschinenbau, model FMB turbo 5-55 / 3200 A (Year 2016) • Max bar length: 3,200 mm • Bar diameter range per supplied spec: 5–65 mm (to be confirmed with feeder documentation) • Feed speed: 0–1,000 mm/s; Return speed: 0–1,000 mm/s • Bar feeder interface • Note: Actual machining diameter limited by lathe to 38 mm • Finished parts conveyor Additional information • The machine is fully operational and does not require any repairs. • The machine has only been used to process brass. It has never been involved in a collision. Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: used, Year of construction: 2017, operating hours: 13,700 h, machine/vehicle number: IntNr2316661, A CNC vertical turning center, TRAUB TNL 12, manufactured in 2017, equipped with a TRAUB TX8i-s control system and comprehensive peripherals, is for sale. The machine comes from the medical technology sector and is in exceptionally well-maintained condition, both visually and technically. General technical data Manufacturer: INDEX-Werke GmbH & Co. KG (TRAUB) Model: TNL 12 Year of manufacture: 2017 Control system: TRAUB SYSTEM TX8i-s CNC axes: 11 axes Max. bar diameter: 13 mm Max. turning length: 130 mm Operating hours (recorded) Control system ON: 22,868 h Production time: 13,620 h Spindle running time: 9,945 h Main spindle Max. speed: 12,000 rpm Drive power: 2.5 / 4.0 kW (100% / 25% duty cycle) C-axis resolution: 0.001° Counter spindle Max. speed: 12,000 rpm Drive power: 2.5 / 4.0 kW (100% / 25% duty cycle) C-axis resolution: 0.001° Tool carrier / Machining Tool turret: 2 turrets Tool stations: 6 stations each Powered tools: on all turret stations Tool drive (turret): Up to 8,000 rpm Tool drive power: 1.5 kW (25% duty cycle) Front machining unit: 4 tool stations Credpfo Ahfarox Ak Aoi Rear machining unit: 4 tool stations Simultaneous machining: Depends on the number of tool carriers Equipment and peripherals Bar feeder: FMB minimag 20 CO₂ extinguishing system: Kraft & Bauer FB 703 Coolant treatment: RESY compact belt filter system Oil mist extraction: NOVA, mounted on the machine Electrical connection data Voltage: 400 V / 50 Hz / 3-phase Connected power: 16 kW / 19 kVA Rated current: 27 A The machine can be inspected by appointment. Subject to changes and errors in technical data and specifications as well as prior sale!

Condition: used, This listing is for a ChemoMetec DK-3450 Allerod Automated Cell Counter The unit is in full working condition and ready for immediate use This automated cell counter is a high-quality lab instrument manufactured by ChemoMetec (Model: DK-3450 Allerod). Provides highly accurate and reproducible cell counting and viability analysis using advanced imaging cytometry technology. It has been sourced directly from a working facility, offering premium performance and dependability for standard laboratory applications while ensuring a cost-effective alternative to purchasing brand new equipment. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Cjdpfx Aezuf Sxsk Aeri Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Condition: ready for operation (used), Counter Stackers Crsdpfxeir A Nye Ak Asi Palamides Alpha 800 -2003

Condition: good (used), Year of construction: 2020, x-travel 1.300 mm y-travel 290 mm z-travel 450 mm table-size 1.600x 320 mm table load 0,5 t spindle turning speed range 80-5.000 U/min spindle turning speeds of horiz. head: 60-1.800 U/min spindle taper vertical SK40 spindle taper: hori. SK50 quill stroke 127 mm feeds x/y/z -stepless 0-1.000 mm/min rapid traverse X-axis 5 m/min total power requirement 10 kW weight of the machine ca. 2,7 t dimensions of the machine ca. LBH 1,9 x 2,1 x 2,5 m -Swiveling milling head with quill feed; -Horizontal spindle with independent drive; -Pneumatic tool clamping system; -3-axis position display; -Electronic handwheels; -Pneumatic tool clamping; -Coolant system; -Work light; -Chip tray; Crjde Ahzi Njpfx Ak Aoi -Manual central lubrication; -Hydraulic machine vise; -Various tool holders; -Various horizontal tool holders; -Collet set in a case; -Outboard support (counter-bearing) for horizontal milling

Condition: used, functionality: fully functional, Year of construction: 2008, operating hours: 7,329 h, load capacity: 2,500 kg, lifting height: 6,500 mm, fuel type: electric, mast type: triplex, construction height: 2,800 mm, drive type: Elektro, Four-way front forklift Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Battery year: 2023 Codpexgyz Eefx Ak Aori Side shifter, fork positioner, 3rd valve, 4th valve, heater, full cabin,

Condition: ready for operation (used), Year of construction: 2009, operating hours: 35,981 h, punching force: 41 t, sheet thickness (max.): 15 mm, overall weight: 4,900 kg, total width: 2,250 mm, total height: 2,100 mm, product length (max.): 5,800 mm, CNC punch press manufactured in 2009. This BOSCHERT CU-Profi features 4 Amada tool stations and a parting station of 60x10 mm, including tooling. It comes with a tooling package of punch and die sets for stations A and B, along with integrated infeed and outfeed roller conveyors for efficient material handling. If you are looking to get high-quality punching capabilities, consider the BOSCHERT CU-Profi machine we have for sale. Contact us for further details. Cedpfs Ahkaisx Ak Asri - Punching Force: 400 kN (40 tons)- Maximum Sheet / Material Thickness: 12 mm to 15 mm (copper/aluminum flat bar: standard 3 – 12 mm, up to 15 mm max; copper up to 10 mm with diameter 31.7 mm, copper up to 12 mm with max. diameter 20 mm)- Maximum Workpiece Width: 15 – 200 mm- Maximum Workpiece Length: Up to 3 m- Tool Stations: 4+1 stations (4x Amada holder size B + 1x separation/cutting station 60 x 10 mm / 60 x 8 mm)- Maximum Punch Diameter: 4 x 31.7 mm or any contour within 31.7 mm (B station)- Included Tooling: Punch and die sets for stations A and B, punch reduction adapter from B to A, die holder adapter from B to A, separation/cutting tool (excluding copper stock and tooling/punches)- Stroke Rate: Approx. 85 strokes/min max. (optional fast hydraulics approx. 180 strokes/min)- Stroke Counter: 4,541,086 strokes- Operating Hours - Machine On: 35,855 h- Operating Hours - CNC On: 35,981 h- Operating Hours - Drives On: 35,799 h- Operating Hours - Hydraulics On: 8,465 h- Material Infeed: Material gripper feed via guide unit and AC servomotor; zero-waste gripper design; repeatability ±0.1 mm- Clamping System: Hydraulic Y-axis material clamping before and after the punching head- Parts Discharge: Finished part unloading system downstream of punching head; automatic scrap disposal- Support Surface: Roller support table and guide track system; large support table for copper busbars- Control System & CNC: CNC Control LABOD with graphic path control; DOS-based architecture; 3.5" floppy disk drive; tool library for 500 tools with graphical shape display; automatic overlap and cutting force monitoring- Software & Connectivity: 1x PC version (runs on Windows 95/98/NT 4.0); 1x CNC/CAD (cncKad / Metalix CAD/CAM with DXF, IGES, CADL, DWG import; server-capable); 1x Multitalk (SD card 256 MB storage for ~100,000 programs, USB interface with external cabinet cable mount, 256 MB USB stick, network port with FileZilla Server integration)- Safety: Front light curtain safety barriers and safety interlock guarding compliant with CE standards- Hydraulics: H&L hydraulic unit with oil cooling (4.7 kW standard / 11 kW optional); 160 l oil capacity- Connected Load (Anschlußleistung): 18 – 25 kVA- Power Supply (Netz): 3 x 400 V, 50/60 Hz- Control Voltage (Steuerspannung): 24 V- Required Fuse Protection: 3 x 35 A- Dimensions (L x W x H): 5.8 m x 2.25 m x 2.1 m- Machine Weight: 4,900 kg- Machine Color: Gentian Blue (RAL 5017)

Condition: used, Rieber MaxMo Cold Buffet Unit The Rieber MaxMo Cold Bain Marie is a professional cooling system specifically designed for use in the catering and food service industries. With this innovative device, you can present and keep a variety of cold dishes, such as salads, desserts, cold cuts, seafood, and much more, at the optimal temperature. The cold bain marie features a precise temperature control system that allows you to individually set the desired cooling temperature for each dish. The constant cold ensures that the dishes are stored safely and hygienically, preserving their quality, taste, and appearance. The Rieber MaxMo Cold Bain Marie is characterized by its high-quality workmanship and first-class materials, which guarantee efficient cooling. The device is energy-efficient and environmentally friendly, allowing you to optimize both the quality of your dishes and your operating costs. The user-friendly operation of the cold bain marie makes it an indispensable tool in busy kitchens. The units are easy to clean and maintain, minimizing workload and giving you more time for your guests. The modular design of the Rieber MaxMo Cold Bain Marie offers you flexibility and adaptability. You can combine several units to expand the capacity and meet your specific requirements. In addition, the cold bain marie is mobile and can be easily used at different locations. Overall, the Rieber MaxMo Cold Bain Marie is an excellent choice for restaurateurs and catering professionals who want to present cold dishes in the highest quality. Invest in this innovative cooling system and impress your guests with fresh and appetizing dishes that will delight their senses. Cjdsmfrawjpfx Ak Asri Features: - Total connected load: 1.132 kW - Rated voltage: 3 N AC 400V 50Hz - External dimensions WxDxH: 133 x 82 x 91/136 cm Item condition: used You can find more buffet units in other sizes - new and used - in our shop! International shipping costs available upon request!

Condition: like new (used), 195 1940 M2 Cjdpfx Aszfglbjk Ajri 24 VDC Application: Machinery/Plant Engineering Width: 50 mm Height: 49 mm Depth: 85 mm Weight: 170 g Condition: Like new

Condition: used, Year of construction: 1970, machine/vehicle number: 120895, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time between December 1, 2026, and December 10, 2026! TECHNICAL DETAILS General Information Machine type: Single-column eccentric press Machine weight: approx. 5.5 t Performance Data Pressure: 63 t Stroke rate: 120 strokes/min Stroke and Working Data Overhang: 250 mm Stroke: 8–100 mm Installation height: 330 mm Ram adjustment: 63 mm Table and Clamping Surfaces Table: 715 × 500 mm Clamping plate: 700 × 480 mm Through-hole in the table: 240 mm Through-hole in the clamping plate: 110 mm Ram clamping surface: 450 × 280 mm Tilting Design Tilting stages: 4 Through-hole to the rear: 325 × 500 mm Credpfxo Achxbs Ak Aei Through-hole downwards: 360 × 160 mm Additional Clamping Plate Dimensions: 700 × 480 × 850 mm Dimensions Space requirement: approx. 1.2 × 1.7 × 2.7 m EQUIPMENT Hydraulic adjustment system for tilting the press Central lubrication via hand pump Additional clamping plate Two-hand operation Foot pedal release can be configured Operating mode selector switch for setup, continuous stroke, and single stroke Emergency stop switch Part counter Various accessories