Used Xas 87 for sale (1,241)

Condition: good (used), For sale: a mobile Atlas Copco XAS 60 screw compressor with a Deutz F2L 511 diesel engine. The unit has only 613 operating hours since new. The engine is in very good condition – it starts easily and runs properly. Chodpfx Akozv Ei Hensc The compressor was imported from Germany. It has not been used for about fifteen years, and the compressor's screw element has seized. We attempted to repair it, and the unit was reassembled, but it currently only generates a pressure of approximately 4 bar. For this reason, it is being sold as damaged, for further repair. It may be an interesting proposition for someone who will undertake the repair of the compressor, or as a source of parts, especially the well-maintained Deutz F2L 511 engine. Engine data: * Manufacturer: Deutz * Type: F2L 511 * Power: 25 kW / 34 HP * Speed: 2800 rpm * Operating hours: 613 hours * Engine is functional, starts and runs properly The visual condition is appropriate for the age of the unit – visible signs of use, storage, and localized corrosion.

Condition: used, Year of construction: 2023, Atlas Copco XAS 58-7G Compressor Trailer, FIN: P0881834 * Kubota D1105-EF02 diesel engine * 18.2 kW / 24 hp * TEX 230PE H28 hammer * TEX 10PSKL hammer * TERRA Hammer TU 055R rock drill * Compressed air hose * Hose reel Compressor with generator, ATLAS COPCO XAS 58-7, Year of manufacture: 11/2023 Equipment: Construction compressor Atlas Copco MCT, Type XAS 58-7 G, with integrated generator 6kVA, socket: 2 x 360V / 1 x 230V. Unbraked chassis, adjustable in height, initial oil fill, crane eye, closed bottom tray, starter motor protection (SMP), overrun and parking brake, reversing automatic, spur gear, support leg (unbraked version), truck DIN tow hitch (400mm), lighting according to StVZO (German Road Traffic Licensing Regulations), operating permit. Accessories: Compressed air hammer Atlas Copco, Type TEX 10 PSKL, weight: 10.7 kg. Compressed air hammer TEX 230 PE, weight: 27 kg. Various pointed and flat chisels, asphalt chisel 115 mm wide, TERRA Hammer TU055R, TERRA compressed air hose, length approx. 15,000 mm, TERRA oiler. Original price: complete with accessories 28,000 € net. * New main inspections / safety checks or weight adjustments are available upon request. We will gladly assist you in obtaining export/transfer license plates, and we can also arrange for the transportation of your purchased vehicles within Germany. Contact us! ---- We speak the following languages: German, English and Russian! ---- No liability for printing and typographical errors, changes, prior sale and errors reserved! ---- Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the refurbishment and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. On 11,000 m², you will find a wide range of vehicles. Our corporate philosophy is characterized by fairness and reliability. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person to assist them in the purchase or sale of vehicles. See for yourself! Our services for you: Loading of vehicles We will gladly help you with loading your purchased vehicles. Organizing special transports We will gladly help you organize special transports. Cedpfxsy Rv Ilo Aknohc Short-term registration / export license plates We will gladly help you obtain export license plates/short-term registration. Handling customs formalities

Condition: used, Year of construction: 2023, Atlas Copco XAS 58-7G Compressor Trailer, FIN: P0881834 * Kubota D1105-EF02 diesel engine * 18.2 kW / 24 hp * TEX 230PE H28 hammer * TEX 10PSKL hammer * TERRA hammer TU 055R earth drill * Compressed air hose * Hose reel Compressor with generator, ATLAS COPCO XAS 58-7, manufactured: 11/2023 Equipment: Construction compressor Atlas Copco MCT, type XAS 58-7 G, with integrated generator, 6 kVA, sockets: 2 x 360V / 1 x 230V. Unbraked chassis, height adjustable, initial oil filling, crane eye, closed bottom pan, starter motor protection (SMP), overrun and parking brake, reversing automatic, spur gear, support leg (unbraked version), truck DIN tow hitch (400mm), lighting according to StVZO, operating permit. Accessories: Compressed air hammer Atlas Copco, type TEX 10 PSKL, weight: 10.7 kg Compressed air hammer TEX 230 PE, weight: 27 kg Various pointed and wide chisels, asphalt chisel 115 mm wide TERRA hammer TU055R, TERRA compressed air hose, length approx. 15,000 mm, TERRA oiler. Original price: complete with accessories, €28,000 net. * New main inspections / safety checks or weight reductions/increases are possible upon request. We will gladly assist you in obtaining export/transfer license plates; furthermore, we can arrange for the transport of your purchased vehicles within Germany. Contact us! ---- We speak the following languages: German, English and Russian!---- No liability for printing and typographical errors, changes, prior sale and errors reserved!----Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the preparation and distribution of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the distribution of new and used commercial vehicles. A wide variety of vehicles can be found on 11,000 m². Our corporate philosophy is characterized by fairness and integrity. Since customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in the purchase or sale of vehicles. Come and see for yourself! Cjdpfx Asyai Eusknjhc Our services for you: Loading of vehicles We will gladly assist you in loading your purchased vehicles. Organization of special transport We will gladly assist you in organizing special transport. Day registrations / export license plates We will gladly assist you in obtaining export license plates/short-term registrations. Processing of customs formalities

Condition: excellent (used), Year of construction: 2012, ATLAS COPCO XAS87 COMPRESSOR, 5.00 m3, 12 bar!! DIESEL ATLAS COPCO XAS87 compressor, serviced. Technical data: Capacity: 5.00 m3/min; Operating pressure: 7 bar; Year of manufacture: 2012; Engine: KUBOTA Operating hours: 1397 h!!! Chjdpfxotyk Tae Aknjc The compressor is in full working order, ready for operation, and comes with a warranty. Net price: 32,500 PLN Gross price: 39,975 PLN Below is a link to a video showing the machine in operation.

Condition: ready for operation (used), Year of construction: 2023, operating hours: 2,222 h, functionality: fully functional, machine/vehicle number: ya3064249n0867271, overall weight: 2,450 kg, fuel type: diesel, operating pressure: 14 bar, Equipment: type plate available, For sale is a powerful, mobile screw compressor, an Atlas Copco XAS 188-14 PACE S5. Csdozzp N Ispfx Aknshc The machine is in good used condition and only shows the usual signs of wear and tear from use. The compressor is ideal for professional applications in sandblasting, abrasive blasting, construction, renovation, industry, and the operation of high-performance pneumatic tools. Thanks to the PACE technology, the required working pressure can be flexibly adjusted to suit the specific application. Technical data: Manufacturer: Atlas Copco Model: XAS 188-14 PACE S5 Operating hours: approx. 2,222 h Fuel: Diesel Engine: John Deere, 4-cylinder Engine power: 104 kW / approx. 141 hp Working pressure: 5–14 bar Air flow rate: up to approx. 10.9 m³/min Emission stage: Stage V Control system: Atlas Copco PACE Sound power level: 99 dB(A) Design: mobile compressor on a single-axle chassis Braked chassis with drawbar Emergency stop and electronic control system are available The compressor can be inspected and test-run by appointment.

Year of construction: 1998, condition: used, functionality: fully functional, Description: For sale is a large-scale, professional BERKMANN surface spraying and painting system. The system was in productive use until recently and was used for high-quality painting work, including demanding high-gloss finishes. It is currently still fully assembled and installed. This allows interested parties to inspect the existing scope of the system and the installation situation before dismantling and to document it for a later reconstruction. Technical Data and Equipment • Large-area filtered supply air ceiling panel approximately 8,100 × 4,500 mm • Filter ceiling divided into two areas across its width • Large-area floor extraction approximately 8,100 × 3,650 mm with grating • Supply air treatment approximately 24,500 m³/h • Exhaust air treatment approximately 24,000 m³/h • Supply and exhaust air fans / air treatment • Existing heating/hot water technology with pumps and fittings • Air ducts and existing piping • Electrical system control / control panel • Cabin lighting • Sale includes the system as it currently exists on site Condition and Use Used, condition appropriate for its age. The system was in regular production use until recently. Previous use included high-quality surface finishing, including high-gloss coatings. An inspection of the still-assembled system is highly recommended. Sales and Dismantling Conditions Sale is effective immediately. The system is permanently installed. Dismantling, removal, loading and transport are the complete responsibility of the buyer and will be carried out at the buyer's expense. The buyer is responsible for organizing the necessary skilled personnel as well as lifting, dismantling and transport equipment. The complete dismantling and removal must be completed by July 31, 2027, at the latest. Codsz Ikyropfx Aknshc Note: Technical data has been compiled based on available documents, nameplates and the current condition of the system. Information is provided without guarantee. The condition and scope determined during inspection shall prevail. Selling price: 31,500.00 EUR Price is net, any applicable statutory taxes and duties are excluded. Export, customs clearance and import duties are the responsibility of the buyer.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, DIESEL ATLAS COPCO XAS 67 Compressor – Serviced! The compressor is registered in Poland. Technical specifications: Capacity: 3.60 m3/min; Chedpfx Akszwmlrenoc Operating pressure: 7 Bar; Year of manufacture: 2015; Engine: KUBOTA Operating hours: 1847h! The compressor is fully functional, ready for work, and comes with a warranty. Net price: 32,500 PLN Gross price: 39,975 PLN Below is a link to a video demonstrating the machine in operation.

Condition: used, Year of construction: 2012, functionality: fully functional, Condition: fully operational, well maintained, in production. Available immediately! SCM SIGMA IMPACT 87 panel saw, 2012 years, powerful, accurate, and reliable industrial panel saw designed for high‑productivity furniture and panel‑processing operations. Ideal for woodworking factories, cabinet manufacturers, and large-scale production. Technical specifications Cutting dimensions: 3200 × 2100 mm Main blade projection: 87 mm Main blade diameter: 350 mm Main blade speed: 3900 rpm Main motor power: 5.5 kW Scoring blade: 1.5 kW, 6300 rpm, 160 mm Carriage speed: 6–30 m/min Pusher speed: 27–38 m/min Standard grippers: 5 Dust extraction ports: 3 × 120 mm or 1 × 150 mm Codoycg Rmjpfx Aknshc

Condition: ready for operation (used), Year of construction: 2010, Main Drive Number of axis 3 Movement X-Axis Movement 800 mm Y-Axis Movement 1000 mm Z-Axis Movement 700 mm Additional Equipment Probes: 2 included This 3-axis Wenzel XO 87 was manufactured in 2010. It features a robust CMM machine design with X-axis travel of 800mm, Y-axis at 1000mm, and Z-axis at 700mm. If you are looking to get high-quality measuring capabilities, consider the Wenzel XO 87 machine we have for sale. Contact us for more information. Application Types Chjdpjx D Nrhsfx Aknjc Measuring

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 1,608 h, Atlas Copco XAS 67 DDG compressor, manufactured in 2011, with 1608 operating hours, a flow rate of 3.5 m³, emergency power output of 12.5 kVA, and connections for 1 x 230 volts and 2 x 400 volts. Serial number: YA3062565B0165591. Approval documentation is available. Cjdpjzbiivjfx Aknjhc

Condition: used, Year of construction: 2020, x-travel 800 mm y-travel 700 mm z-travel 700 mm Control Wenzel max. workpiece weight 0 kg Csdpszgibzofx Aknehc accuracy Renishaw SP 25 M Measurement inaccuray 2,6 µm repeatability 1,6 µm Longitudinal uncertainness MPE: 3,5 + L/0 µm (standard) Longitudinal uncertainness MPE: 3,5 + L/0 µm (extended)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, operating hours: 1,680 h, Compressor Atlas Copco XAS 67 DDG, year of manufacture 2012, 1680 operating hours, volume flow 3.5 m³, emergency power 12.5 Kva, connections 1 x 230 Volt, 2 x 400 Volt, Ser.No.YA3062560C0250310 Codpfxsu Dh Tlj Aknshc

Condition: used, 72″ x .187″ x 50,000Lb Paxson Loop Slitting Line Make: Paxson Material Width: 12″ – 72″ (Uncoiler 60″) Material Width: .010″ – .187″ Coil Weight: 50,000Lb Coil ID: 20″ – 24″ Coil OD: 72″ Speed: 500 /1000 fpm Direction: Right to Left Material Strength: 40,000 yield / 50,000 psi shear Material: CR, HR, Galvanized Entry Transfer Cart Entry Coil Car Mandrel Uncoiler Powered Hold-Down Roll Chedpfx Aeihf Ufsknec Powered Expansion Sliding Base Hydraulic Peeling Table Driven Pinch Rolls

Condition: ready for operation (used), functionality: limited functionality, Year of construction: 2011, operating hours: 1,192 h, Equipment: soot filter, Compressor Atlas Copco XAS 67 DDG, built in 2011, 1192 operating hours, volume flow 3.5 m³, emergency power 12.5 kVA, connections 1 x 230 volts, 2 x 400 volts, serial number YA3062566B0165583, approval available, the fuse blows when the emergency power is switched on, downstream soot filter SMF-MR Chjdpfxev Rbufj Aknsc

Condition: refurbished (used), Year of construction: 2016, operating hours: 5,046 h, load capacity: 2,000 kg, lifting height: 4,200 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 2,100 mm, battery voltage: 24 V, fork length: 1,150 mm, empty load weight: 1,280 kg, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONALS IN ACTION. Chsdpfjz Ikiasx Aknjc Our forklifts are technically reconditioned to meet FEM-4.004 and current safety standards – for maximum quality and your safety. From the frame to the battery, including the drive system, brakes, steering, and electrical system – each vehicle is thoroughly inspected and repaired. * Made in Germany – with responsibility and precision * Strict technical inspection * 400+ vehicles available * Worldwide transport & customs clearance * Service & spare parts at fair prices * Personal support – even after the purchase Test and get advice on-site now – we will find the right solution for you. Forklift data: Manufacturer: Jungheinrich Type: High lift pallet truck EJC 220 Drive type: Electric Load capacity: 2,000 kg Year of manufacture: 2016 Operating hours: 5,046 Lifting height: 4,200 mm Mast type: Triplex Free lift: Yes Overall height: 2,100 mm Fork length: 1,150 mm Unladen weight: 1,280 kg Load center: 600 mm Tires: Polyurethane Model type: EJC 220 Battery type: PzS Voltage: 24 V Battery weight: 1,280 kg

Condition: repair required (used), functionality: unexamined, fuel type: diesel, Year of construction: 2017, operating hours: 1,154 h, Atlas Copco XAS 68 DDG compressor, year of manufacture 2017, 1,154 operating hours, volumetric flow 3.5 m³, emergency power 12.5 kVA, connections: 1 x 230 Volt, 2 x 400 Volt, serial no. YA3064303H0461812, axle bent, compressor otherwise fully functional, ABE/registration available. Chsdpfx Akoy Aktaonsc

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 4,467 h, load capacity: 1,800 kg, lifting height: 5,070 mm, free lift: 1,630 mm, fuel type: electric, mast type: triplex, construction height: 2,260 mm, fork carriage width: 980 mm, fork length: 1,200 mm, drive type: Elektro, Electric 3-wheel forklift Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Refurbished, no warranty Technical condition: very good Front tire type: Superelastic Front tire size: Brand new Front tire condition: New Rear tire type: Superelastic Rear tire size: Brand new Rear tire condition: New Battery voltage: 48V Battery Ah: 625Ah Battery manufacturer: 87% remaining capacity Cjdpfszwh H Dex Aknohc Battery type: PzS Battery year of manufacture: 2018 Battery condition: 80 - 100% Description: Overhauled, serviced, and inspected according to FEM 4.004 (UVV). Completely repaired, serviced and checked. Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, full cabin, safety light, rotating beacon.

Condition: used, Year of construction: 1986, length 1000 mm Codpfx Akjxab Dhsnehc width 750 mm Equipment: - Measuring plate with T-slot - JFA accuracy grade 1+ - Permissible deviation 0.004 / Actual deviation 0.003

Condition: used, 72″ x .187″ x 20,000Lb Universal Slitting Line Material Width: 12″ – 72″ Material Thickness: .015″ – .187″ Coil Weight: 20,000Lb Coil ID: 20″ Coil OD: 72″ Direction: Left to Right Entry Floor Standing Coil Car L-Type Design Hydraulic Lift & Traverse Mandrel Uncoiler Powered Hold-Down Roll Hydraulic Expansion Air Cooling Brake Sliding Base Hydraulic Peeling Table Slitting Head Arbor Diameter: 7″ Powered Arbor Adjustment 100HP DC Motor Knives & Tooling Cjdpfx Aeihf Twsknohc Recoiler Powered Push-Off Hydraulic Over-Arm Separator Hydraulic Expansion 100HP DC Motor Exit 2-Arm Turnstile Arm Width: 72″ Powered Rotation Complete Slitter with Electrics, Hydraulics, Controls, Tooling

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, total height: 1,560 mm, total width: 1,100 mm, total length: 700 mm, overall weight: 400 kg, workpiece weight (max.): 100 kg, Apex comminuting mill Chjdpfjz D Tbwox Aknoc Capacity > 100 kg / h (The engine is larger than Schutte) Stainless steel Simple design Compact size Used machine Screen sizes 2mm + one very small one (Will we get desired particle size)

Condition: excellent (used), power: 98 kW (133.24 HP), gearing type: automatic, fuel type: diesel, color: other, Year of construction: 2006, operating hours: 4,870 h, GVW: 23.000 kg Quick coupler system: Yes Technical condition: very good Visual appearance: very good = Dealer information = Chodpfoz It T Isx Aknoc Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 4DOUG52347, power of the servo motor: 550 W, input voltage: 230 V, clearance between the columns: 261 mm, type of input current: AC, throat depth: 130 mm, pneumatic connection: 6 bar, Professional Production Set of Six JUKI Industrial Sewing Machines from the MASI JEANS Factory This lot consists of six JUKI DDL Series industrial single-needle lockstitch sewing machines, removed directly from the production lines of the former MASI JEANS factory in Estonia. The JUKI DDL-8500 and DDL-8700 Series are among the world's most widely used industrial sewing machines, renowned for their reliability, smooth operation and consistent stitch quality. Designed for continuous production environments, they are an excellent choice for garment manufacturers seeking dependable, high-speed sewing equipment. Because all machines operated in the same factory, this matched production set offers consistent performance, common spare parts, simplified maintenance and identical operating principles, making it ideal for expanding an existing production line or establishing a new sewing department. Bundle Contents Machine 1 Model: JUKI DDL-8700-7 Internal Reference: 6A Machine 2 Model: JUKI DDL-8700-7 Internal Reference: 109A-7078 Machine 3 Model: JUKI DDL-8500 Year: 2002 Internal Reference: 113A-7101 Machine 4 Model: JUKI DDL-8500-7 Year: 2001 Internal Reference: 26B-7049 Machine 5 Model: JUKI DDL-8700-7 Internal Reference: 27B-7088 Machine 6 Model: JUKI DDL-8700-7 Year: 2002 Internal Reference: 28B-7090 Technical Specifications Manufacturer: JUKI Corporation Model Series: DDL-8500 / DDL-8700 Machine Type: Industrial Single-Needle Lockstitch Sewing Machine Country of Manufacture: Japan Maximum Sewing Speed: Up to 5,000 stitches per minute Fully Automatic Lubrication System Complete Industrial Workstations Heavy-Duty Steel Stands Five machines equipped with the JUKI "-7" electronic automation package featuring: • Automatic Thread Trimming • Automatic Backtacking • Automatic Needle Positioning Key Features • Factory-matched production set • Six professional JUKI industrial sewing machines • High-speed, reliable industrial performance • Excellent stitch quality for continuous production • Common spare parts and maintenance procedures • Complete workstations ready for installation • Proven Japanese engineering Applications • General garment manufacturing • Denim and jeans production • Workwear and uniforms • Shirts and sportswear • Medium-weight woven fabrics • Industrial apparel manufacturing Condition Previously used in professional garment production. All machines remained operational until the scheduled closure of the MASI JEANS factory. Good overall industrial condition with normal cosmetic wear consistent with factory use. Available for inspection before dismantling. Location Valga, Estonia Dismantling & Transport Cedpfx Akoznlbyonjhc Buyer is responsible for dismantling, loading, transportation, and all associated costs. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI JEANS factory liquidation. The machines are offered primarily as one complete factory-matched production set. Individual sales may be considered subject to the prior sale status of the complete lot.

Condition: ready for operation (used), Year of construction: 2012, Travel X/Y/Z: 800mm/2000mm/700mm, max. length measurement error: 2.5 + L/350, max. single-point error: 2.5, control: Pantec Eagle Pro/3. Includes test head PH10M Plus, PHC-2, sensor TP200, 20-piece probe set, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. An on-site inspection is possible. Csdjw H Au Rspfx Aknehc

Year of construction: 1985, condition: good (used), Radial fan, high-pressure radial fan, dust extraction blower, exhaust gas extraction, welding fume extraction, extraction, extraction blower, fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower -Manufacturer: Rippert, radial fan, extraction blower -Type: S8-710/2-A -Volume flow: 32000 m³/h -Total pressure: 3200 Pa -Motor: Schorch 55 kW 1470 rpm -Inlet connection: Ø 700 mm -Outlet connection: Ø 800 mm -Fan wheel: Ø 1200 x 230 mm -Protection class: IP 54 -Dimensions: 2900/1400/H2170 mm Codpfx Akoz Im R Honjhc -Weight: 1470 kg

Condition: refurbished (used), Year of construction: 2021, operating hours: 3,912 h, load capacity: 1,500 kg, lifting height: 3,100 mm, load center: 500 mm, fuel type: electric, mast type: duplex, construction height: 2,065 mm, battery voltage: 48 V, fork length: 1,200 mm, empty load weight: 2,211 kg, Equipment: cabin, FRIEDMANN FORKLIFTS – RECONDITIONED BY EXPERTS. FOR PROFESSIONALS IN ACTION Our forklifts are technically refurbished to meet FEM-4.004 and current safety standards – for maximum quality and your safety. From the frame to the battery, including drive, brakes, steering, and electrical system – each vehicle is thoroughly inspected and repaired. * Made in Germany – with responsibility and precision * Strict technical inspection * 400+ vehicles available * Worldwide transport & customs clearance * Service & spare parts at fair prices * Personal support – even after the purchase Test and get advice on-site now – we will find the right solution for you. Forklift data: Manufacturer: Jungheinrich Type: Front forklift EFG 215 Drive type: Electric Load capacity: 1,500 kg Year of manufacture: 2021 Operating hours: 4,041 Lifting height: 3,100 mm Mast type: Duplex Free lift: Yes Overall height: 2,065 mm Fork length: 1,200 mm Unladen weight: 2,211 kg Load center: 500 mm Tires: Solid rubber Model type: EFG 215 Battery type: PzS Voltage: 48 V Battery weight: 650 kg Cabin type: Overhead guard Cabin equipment: SoloPilot control element Cjdpfx Ajz Ikhisknehc Lighting: Work lights 2x front Lighting: BlueSpot rear – safety light Attachment: Side shifter