Used Heating Plate for sale (27,409)

Condition: excellent (used), Year of construction: 2016, operating hours: 27 h, SBL 1060 SE Year: 2016 Sheet feeder: Manual non-stop pile feeder Material range: Paper and board from 470 × 350 mm to 1060 × 760 mm Max cutting format: 1050 × 740 mm Min sheet size: 470 × 350 mm Max sheet size: 1060 × 760 mm Max cutting pressure: 300 tons Material thickness: 0.1 – 2 mm (corrugated/laminated max 4 mm) Min gripper margin: 9.5 mm Max inside chase size: 1155 × 852 mm Cutting plate size: 1076 × 756 mm Max speed: 8,000 sheets/hour Power consumption: Total 32 kW (22 kW + 10 kW for lower plate heating) Machine dimensions (L×W×H): 5,900 × 5,700 × 2,615 mm Max pile height – feeder (with pallet): 1,750 mm Max pile height – delivery (with pallet): 1,450 mm Feeder Section - Pneumatic feeder table - Non-stop manual feeder system - Anti-static system - Pre-pile device - Manual suction group adjustment - Micrometric suction adjustment - Motorized side pile adjustment - Suction belt feeder table - High-pressure lubrication pump - 2 pneumatic side register guides - Electronic control of front and side register Cutting/Embossing Section - Automatic pressure adjustment up to 300 tons - Preparation and introduction table for die frames in platen - 2 quick-lock die chase frames with bottom plate - Pneumatic locking of the chase and lower supporting plate - Centerline System - Micrometric system - Heated lower support plate (24 mm) - Cutting plate: 4 mm - Compensation plate: 3 mm - Archiveable 1 mm thin cutting plate Stripping Section Guolowypp Iohccqmei - Quick lock for upper and central stripper frames - 2 standard upper stripper frames - 2 standard lower stripper frames - Double accessory kit for lower stripper prep (pins, bars, clamps, etc.) Delivery Section - High-pile automatic non-stop delivery with conveyor - Guillotine for automatic removal of gripper margin waste - Sheet deceleration device - Tab insertion device

Condition: used, Year of construction: 2002, machine/vehicle number: 98, Heizplatte / Heating Plate Busse HPT 900W Serial-No. 98 822 Heiztemperatur einstellbar / Heating temperature adjustable Arbeitsfläche / Working area max. 350 x 650mm 5 Trockenklammern / 5 Drying clamps Online-Video-Inspection by Skype-Video Gujljupy S Nehccqmsi We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: ready for operation (used), Heavy hydraulic press Gslhccqou R U Szjmjui

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: BOCHU, controller model: FSCUT4000E, laser type: fiber laser, laser source manufacturer: RAYCUS, laser power: 6,000 W, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 18 mm, sheet thickness aluminum (max.): 12 mm, sheet thickness brass (max.): 10 mm, sheet thickness copper (max.): 5 mm, pipe length (max.): 12 mm, table length: 5,028 mm, working length: 3,000 mm, working width: 1,500 mm, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, repeat accuracy: 0.02 mm, workpiece weight (max.): 2,500 kg, power: 6 kW (8.16 HP), input voltage: 380 V, input current: 16 A, type of input current: three-phase, type of cooling: water, overall weight: 3,000 kg, total length: 4,675 mm, total width: 2,385 mm, total height: 1,475 mm, Equipment: centralized greasing system, cooling unit, documentation/manual, emergency stop, nozzle changer, safety light barrier, NEW LASER HEAD BOCI BLT-421 E Laser Head with Automatic Focus Automatic Nozzle Control - Touch Pad Safety (NEW) Full Cover with exchange table Danmar Machines BV Work table: 3,000 x 1,500 mm BOCHU 2D Laser Head BLT421 BOCHU FSCut4000 E Controller Raycus laser source 6000 CypCut E laser software with nesting function EQUIPMENT: * Application: Metal * Fiber Laser Golhcswr Dmfscqmoui * FSCUT4000E CNC control * Working area: 3,000 x 1,500 mm * Processes: Sheet material * Laser source: RAYCUS with 100,000-hour lifespan * User-friendly operation with BOCHU SMART function * CYPCUT software + CYPNest - Nesting, simulation, calculation of processing time and costs, standard macro - Import: PLT, BMP, DST, DWG, DXF, DXP, STEP, etc. * 120 m/min cutting speed * Servo motors on all axes * HiWin linear rails * Laser Head BOCHU BLT4 series * S&A Water Chiller * Real-time air and gas pressure monitoring * Touchscreen interface * Windows Teamviewer online helpdesk * Model EXP3015GA * Laser Power: 6000W * Working area: 3,000 x 1,500 mm * Repeatability accuracy: 0.02 mm * Maximum speed: 120 m/min * Maximum acceleration: 1.5G * Remote control * Automatic lubrication * Warranty: 2 years, maximum 3,000 operating hours* METAL CUTTING MACHINES High-quality, advanced CNC laser cutting machines Sheet material up to 25 mm thick, depending on the laser source Danmar Machines BV, Almelo - Technicians with over 20 years of experience - Service locations in the Netherlands & Belgium - 24/7 online cloud service - Machine network connectivity 24/7 for continuous monitoring (optional) Support & Service Danmar Machines BV, Almelo and BOCHU INDUSTRIAL aim for bespoke service Fast response > short lines of communication > clear communication SOFTWARE: Drawing Modification and Import Intelligent part recognition, identification and optimization of drawing errors. Supports file formats such as DWG and DXF. Batch creation and component import via Excel table supported. CADCAM: CypNest is a nesting software designed for the CypCut/HypCut laser cutting system. It integrates advanced features like drawing adaptation, fast nesting, toolpath generation, analysis reports, and more to suit your production needs. Contact us without obligation for more information. Please mention your company name and telephone number.

Condition: not inspected (used), functionality: unexamined, overall weight: 150 kg, total length: 640 mm, total width: 640 mm, total height: 1,500 mm, No minimum price – guaranteed sale to the highest bidder! Gjlhcjxqqlcecqmoui The machine is being auctioned due to the liquidation of a business. Submitting a bid binds you to timely collection between 26/01/2026 and 29/01/2026! MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 640 mm x 640 mm x 1,500 mm Weight: 150 kg EQUIPMENT Height gauge Vice with 100 mm jaw width

Condition: used, Bed Plate Tee Slotted 5000mm x 1000mm x 527mm , removed from Butler Elgamil. Gelhoxp Icieccqmoui

Condition: used, surface 4000x1500x270mm, weight 3500kg, 2 plates Gelhcoxnwnrscqmjui

Condition: used, Cast iron bed Gjljxn Invshccqmjui Length: 3300 mm Width: 2000 mm Thickness: 240 mm 8 T-slots T-slots dimensions: 55 x 35 mm Slots spacing: 250 mm Equipped with 20 leveling feet Weight: approx 5,5 T

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, roller diameter: 60 mm, working width: 1,050 mm, sheet thickness (max.): 1 mm, roll metal bending machine Isitan 1050 X 1.2mm Manual 3 roll Bending Machine, excellent condition for sale Guelhcjwk Rlxscqmei manufacturer: Isitan 1050X1.2 max sheet width: 1050mm max sheet thickness: 1.2 mm Wire grooves at the ends of the rollers Conical bender roller diameter: 60mm Upper roller removable for easy workpiece removal machine dimensions: length: 130cm height: 100cm width: 65cm weight: 240kg

Condition: used, Year of construction: 1997, functionality: fully functional, power: 1,000 kW (1,359.62 HP), Boiler with feed system - Year of release: 1997 - manufacturer: Komforts - Power 1 mW. - moving floor supply system with hydraulic station, Gujlhccqsv D Uz Ejmoi - chimney, - pumps, - control, - hot water accumulator.

Condition: used, functionality: fully functional, machine/vehicle number: 7FBMF35-16267, Year of construction: 2013, operating hours: 6,500 h, load capacity: 3,000 kg, lifting height: 4,700 mm, fuel type: electric, mast type: triplex, Electric Forklift Truck – Toyota Year of manufacture: 2013 Technical data: • Model: Toyota 7FBMF30 • Load capacity: 3,000 kg • Drive: Electric (battery powered) Golsw Hhwwehccqmjui • Mast type: Triplex with free lift • Lift height: approx. 4,300 – 4,800 mm • Fork length: 1,070 mm (standard) • Tyres: Solid rubber • Cabin: Open design, optionally with driver protection roof • Condition: Used, serviced and fully functional

Condition: good (used), Cast iron bed - Floor Plate Gujlhccsh Auahsqmoi Useful surface (L x W x H): 3600 x 1200 x 300 mm 4 T-slots: width 44 x 26 mm Equipped with Levelling feet Weight: approx 3 T

Condition: used, Cast iron bed Length: 3300 mm Width: 2000 mm Thickness: 240 mm 8 T-slots T-slots dimensions: 55 x 35 mm Slots spacing: 250 mm Gslhcoww H Ntscqmsui Equipped with 20 leveling feet Weight: approx 5,5 T

Condition: good (used), Marble plate Length: 3500 mm Width: 1500 mm Thickness: 300 mm Height on feet: 930 mm Number of feet: 5 feet Gjlhjig Hu Nsccqmeui 1 small failure on the top (L 150 mm x W 20 mm) - see photo Weight: approx 3 T

Condition: used, Cast iron bed Length: 2300 mm Width: 1900 mm Thickness: 200 mm Height on feet: 980 mm 5 T-slots horizontal and vertical T-slots dimensions: 60 x 35 mm Square dimensions: 365 x 365 mm Crack at a longitudinal T (see photo) Weight: approx 3 T Gujlhcswtc Hgscqmei

Condition: used, Cast bed Length: 2410 mm Width: 1500 mm Thickness: 550 mm 8 T-slots 50 x 27 mm Gslhccownfz Nsqmoui with 2 opening (possibility to close them) 1 opening L 560 x W 500 mm 1 opening L 480 x W 360 mm Weight: approx 5 T

Condition: used, Cast iron bed 2600 x 2000 x 350 mm Guelhccewlhfleqmsi Length: 2600 mm Width: 2000 mm Thickness: 350 mm 8 T-slots T-slots dimensions: 55 x 35 mm Slots spacing: 250 mm Equipped with 12 leveling feet Weight: approx 4,5 T

Condition: used, Cast iron bed 2600 x 2000 x 350 mm Length: 2600 mm Gelhcowlhd Uecqmsui Width: 2000 mm Thickness: 350 mm 8 T-slots T-slots dimensions: 55 x 35 mm Slots spacing: 250 mm Equipped with 12 leveling feet Weight: approx 4,5 T

Condition: good (used), 110 CM X 90 CM X 90 CM Plate Used in tos machine Guelhceurv E Docqmoi

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, number of rollers: 4, roller (top) diameter: 330 mm, side roll diameter: 240 mm, roller length: 2,600 mm, Akyapak 4 – Roll Initial Pinch Bending Rolls Year: 2012 Model: AHS 25/16 Capacity: 2600 x 20mm Rolling 2600 x 16mm Initial Pinch Programme control Top Roll: 330mm dia. Bottom Roll: 300m dia. Side Rolls: 240mm dia. Bending Speed: 0 – 3.5 metres / minute Motor: 11 kw Dimensions: 5385 x 1840 x 1611mm high Weight: 10 570 kgs Gslhcjxwzbzocqmsui

Condition: used, Used Seitz Enzinger Noll reportedly model 60/150 type C stainless steel filter press. Unit has (67) 600mm x 600mm stainless steel plates and (1) stainless steel end plate which will accomodate (66) filter sheets giving approximately 22m2 filtration area. Unit is type C with central tightening device via spindle and capstan handle. Guslhcjxvqhhecqmei

Condition: excellent (used), Here we offer a Mytron drying oven. The drying oven WT 850 is used for simultaneous drying of several products or auxiliary devices in the semiconductor industry. Due to its robust construction (box section frame) and the use of stainless steel material for the heating chamber, the drying oven WT 850 is universally applicable. The trolley enables the WT 850 drying oven to be moved in and thus easily loaded. An exhaust air connection with control flap enables the connection of the oven to a central exhaust system. Technical data: Outer dimensions: Width 1145 mm x height 1880 mm x depth 1810 mm dimensions of the heating chamber: width 850 mm x height 690 mm x depth 1410 mm Volume of the warming chamber: approx. 830 liters mass: ca.230 kg, trolley 50 kg temperature range: 10°C above room temperature to + 120°C spatial temperature constancy: ± 1°C temporal temperature constancy: ± 1°C Mains connection: 3NPE AC 50 Hz 400 V, 16 A CEE plug power consumption: 4,5 kVA fuse protection: 3 x 16 AT, 1x 6 AT Control: digital controller Gujloiwyiwjhccqmoi Safety device: adjustable overtemperature protection Feed-through opening: Exhaust air spigot 100 mm with control damper on top Supply air spigot 100 mm with control damper on top Type: WT 850 Condition: used / used Scope of delivery: (see picture) (Changes and errors in technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, number of rollers: 4, roller (top) diameter: 400 mm, side roll diameter: 300 mm, roller length: 3,100 mm, total length: 5,950 mm, total width: 2,250 mm, total height: 2,350 mm, power: 38.5 kW (52.35 HP), input voltage: 415 V, input frequency: 50 Hz, number of digital displays: 1, Equipment: cone bending device, hardened rollers, Morgan Rushworth DPBH-4 3100/400 Hydraulic 4 Roll Bending Rolls Guslhccqjxvyatomoi Model: DPBH – 4 3100/400 Year: 2018 Working length: 3100mm Central Rolls Dia.: 400mm Side Rolls Dia.: 300mm Machine performance on 3100mm full length: Pre Bending With minimum inside dia. of 600mm: 20mm With minimum inside dia. of 2000mm: 25mm Bending With minimum inside dia. of 600mm: 25mm With minimum inside dia. of 2000mm: 20mm Motor power: 38,5 kw Working Speed (double speed): `.5 – 5 m/min Power Supply: 415V-3Ph=50Hz Machine with: Bottom pinching roll with hydraulic positioning 2 Lateral rolls with double pinch pyramid action Hydraulic drop end Conical Bending Device Dimensions: 5950 x 2250 x 2350mm (L x W x H) Weight: 20,000 kg

Condition: good (used), LAC Heating oven SV6000/25 Temperature range +20 to +250°C TESTO software Weight: 1750 kg 6000 liters Outer dimensions 2850×2000×3700 mm Test chamber dimensions 2000×1500×2000 mm Oven switch 100/3 Max. Floor load 2000 kg Gsleuugaqjhccqmsui Circulation 3000 m3 /h Nominal power 66 kW Nominal current 98 A Voltage 3/N/PE 400/230V AC 50 Hz Weight 1750 kg Condition: gebraucht / used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2018, condition: excellent (used), EFD Type: MINAC 6/10 SM Heat treatment The compact design of the Minac induction heating system allows for easy installation and offers fast, concentrated and controlled heating with full repeatability. repeatability. Medium frequency product line Technical data: Maximum output power 10 kW Continuous output power 6 kW Mains voltage 400-480 V Gelhot Din Aoccqmjui Frequency range 10-25 kHz Control range of output power 2-100% Recommended back-up fuse 16 A Cooling water approx. 4 l/min Cooling water flow temperature min./max. 18 - 35°C Cooling water pressure min./max. 4 - 6 bar Weight approx. 50 kg Dimensions (WxDxH): 345 x 708 x 453 mm Year of construction: 2018 optris CTlaser infrared thermometer Abbreviation: 3ML Measuring range: 50 to 400 °C Spectral sensitivity: 2.3µm Typical application: Metals at low object temperatures (from 50°C) Temperature control ECU 1214C Hyfra eChilly water cooler 4-S Cooling capacity 4395W The device comes from the laboratory sector. Only a few operating hours. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.