Used Heating Plate for sale (22,123)

Condition: used, GENERAL INFORMATION Overall length: 1,900 mm Insulation: present Other details: Chamber I: - permissible operating overpressure: -1/+5 bar - permissible operating temperature: 135° C - capacity: 10 liters Dedexqci Tspfx Affskk Chamber II: - permissible operating overpressure: -1/+2 bar - permissible operating temperature: 135° C - capacity: 40 liters 1 heat exchanger with insulation (also around the openings), the other heat exchanger without; minor dents in the insulation jacket, see photos) Location: Bremen Nameplate: Condition: used last application: pharmaceutical chemistry INSULATION Insulation jacket material: aluminium

Condition: used, GENERAL INFORMATION Heat exchange surface: 2.45 m² Outer diameter: 640 mm Total height: 650 mm Insulation: present Other: Permissible operating temperature: 200°C Channel A: Volume: 12 liters Permissible operating overpressure: -1/+5 bar Gap width: 6 mm Medium: Sludge Channel B: Volume: 15 liters Permissible operating overpressure: 5 bar Gap width: 8 mm Medium: Chilled water Heat exchange surface material: 1.4404 (V4A) Location: Bremen Nameplate: Condition: used Last application: Pharmaceutical chemistry INSULATION Insulation jacket material: Aluminum Dodpfx Afoxqck Djfskk

Condition: used, GENERAL INFORMATION Heat exchange surface: 9.08 m² Location: Bremen Technical documentation: Drawing Nameplate: Condition: Used Last application: Pharmaceutical chemistry Dkedpfx Afoxqclhsfjk JACKET SIDE Jacket volume: 40 liters TUBE SIDE Tube volume: 35 liters Jacket material: AISI316 (V4A) 1.4404 Tube material: AISI316 (V4A) 1.4404 Max. permissible operating overpressure jacket: 5.0 bar Max. permissible operating vacuum jacket: 1.0 bar Max. permissible operating temperature jacket: 200 °C Max. permissible operating temperature tube: 200 °C Max. permissible operating overpressure tube: 5.0 bar

Condition: used, tank capacity: 8,750 l, GENERAL Design: rectangular Comments: Each tank contains 2 cooling plates inside; 1 manhole approx. 300 x 400 mm in the front bottom; feet equipped with loose, height-adjustable spherical cap screws (possibly not all feet complete; cap screws not included in the total height, total height will increase accordingly if used); feet are slightly off-set Overall width: 1,620 mm Overall height: 2,700 mm Overall length: 2,950 mm Heating/Cooling: available Location: Bremen Nameplate: Volume: 8,750 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last use: wine storage TANK Mounting: feet Number of feet: 4 pcs HEATING/COOLING JACKET Temperature control inside: cooling plate EQUIPMENT Outlet: DN40 DIN 11851 MATERIAL SPECIFICATION Dsdpfx Aeycktrjffskk Temperature system material: stainless steel Foot material: stainless steel

Condition: used, tank capacity: 32,000 l, GENERAL Design: vertical Notes: Electric heating cables around parts of the tank; manway diameter (cylinder) 600 mm; insulation with large cut-outs in insulation and insulation jacket; tank is currently fitted with transport bracing; 1 pipeline inside the tank (see photos) External diameter: 2,480 mm Internal diameter: 2,300 mm Total height: 9,150 mm Heating/Cooling: available Insulation: available Location: Bremen Dedpfoyckwwex Affjkk Technical documentation: drawing, static calculations Volume: 32,000 litres Cylinder wall thickness: 6 mm Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 7,250 mm Last application: Chemical industry TANK Support type: legs Number of legs: 3 pieces INSULATION Insulation jacket: bolted Insulation material: mineral wool Insulation jacket material: aluminium EQUIPMENT Manway / access port: in cylinder, in top head (DN 600) Outlet: available Note: Manway cover plated MATERIAL SPECIFICATION Foot material: steel TECHNICAL DATA / DIMENSIONS Top head wall thickness: 6 mm

Condition: used, tank capacity: 8,250 l, GENERAL Equipment: Crane eyes Design: Suspended Heating/Cooling: available Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 6.0 bar Max. overpressure: 2.0 bar Agitator: Anchor agitator Location: External storage Cylinder temperature control: Double jacket Nameplate: Vacuum: 1.0 bar Volume: 8,250 liters Double jacket volume: 685.0 liters Product-contacting material: Enamel Condition: Used Last application: Pharmaceutical TANK Max. permissible operating temperature: 200 °C Base type: Lugs HEATING/COOLING JACKET Bottom temperature control: Double jacket EQUIPMENT Manhole/Dome: Top cover Outlet: available Dkedpfeyciq Nox Affsk AGITATOR Agitator arrangement: Centered on the top cover

Condition: used, tank capacity: 1,000 l, 1000 liter electrically heated, insulated container made of V2A stainless steel Dodpfoyfwpxex Affjkk

Condition: used, GENERAL Exchange surface: 1.3 m² Outer diameter: 620 mm Dkedoxqckkepfx Affsk Insulation: available Other information: Permitted operating temperature: 200°C Channel A: Volume: 7 liters Permitted operating overpressure: -1/+5 bar Gap width: 5 mm Medium: LM.C Channel B: Volume: 7 liters Permitted operating overpressure: 5 bar Gap width: 5 mm Medium: Glyko 50 Heat transfer surface material: 1.4404 (V4A) Insulation jackets partially incomplete Connections partially cut off (see photos) Location: Bremen Technical documentation: drawing Nameplate: Condition: used Last application: pharmaceutical chemistry INSULATION Insulation material: Armaflex Insulation jacket material: aluminium

Condition: used, GENERAL Exchange area: 13.8 m² Internal diameter: 700 mm Total height: 1,950 mm Total length: 5,400 mm Other information: 1 connection bent (see photos); Weight: 1,400 kg Location: Bremen Technical documentation: drawing, inspection certificate Nameplate: Condition: used Dkjdsxqciaopfx Affek Last application: vapour condensate JACKET SPACE Jacket volume: 1,400 litres TUBE SPACE Tube volume: 400 litres Jacket material: AISI316 (V4A) 1.4571 Tube material: AISI316 (V4A) 1.4571 Max. permissible operating overpressure, jacket: 0.5 bar Max. permissible operating vacuum, jacket: 1.0 bar Max. permissible operating temperature, jacket: 200 °C Max. permissible operating temperature, tube: 100 °C Max. permissible operating overpressure, tube: 6.0 bar Max. permissible operating vacuum, tube: 1.0 bar

Condition: used, GENERAL INFORMATION Exchange surface: 11.5 m² Outer diameter: 720 mm Inner diameter: 540 mm Total height: 2,200 mm Insulation: present Other: dents in the insulation jacket; 1 heat exchanger has an overall height increased by approx. 230 mm due to a flanged connection Location: Bremen Technical documents: Drawing Nameplate: Condition: used Last application: pharmaceutical chemistry INSULATION Jacket material: aluminium JACKET SPACE Dsdjxqckwopfx Affskk Jacket volume: 226 liters TUBE SPACE Tube space volume: 50 liters Jacket material: AISI316 (V4A) 1.4404 Tube material: AISI316 (V4A) 1.4404 Max. permissible operating overpressure (jacket space): 4.2 bar Max. permissible operating vacuum (jacket space): 1.0 bar Max. permissible operating temperature (jacket space): 200°C Max. permissible operating temperature (tube space): 200°C Max. permissible operating overpressure (tube space): 5.0 bar

Condition: used, tank capacity: 8,000 l, GENERAL Equipment: Level indicator (without guarantee), crane lugs Design: upright Remarks: Manhole diameter (cylinder): approx. 420 x 320 mm; 2 thermoplates in the cylinder area Internal diameter: 1,800 mm Total height: 3,925 mm Heating/cooling: available Max. permissible operating overpressure: 6.0 bar Support design: feet Location: external storage Technical documentation: drawing Cylinder temperature control: thermoplate Volume: 8,000 liters Product contact material: V2A 1.4301 (AISI304) Condition: factory new Cylindrical height: 2,976 mm TANK Number of feet: 3 FEATURES Manhole / dome: in the cylinder, in the top (DN 400) Outlet: DN50 DIN 11851 MATERIAL SPECIFICATION Outer surface: marbled Dedpfx Aox Dmb Tsffjkk

Year of construction: 2000, condition: used, Della Toffola NF5 mobile kieselgur plate filter 5 m², Aisi 304 Dkjdet Ebizopfx Affjk - condition: used - location: Bremen - total height: 1.890 mm - total length: 1.200 mm - total width: 2.100 mm - remarks: - Working pressure: +6 Bar; - material in contact w/ medium: Aisi 304; - filter medium: diatoms; 240 l tank with agitator for preparing the diatoms; - agitator arranged eccentrically in the upper bottom; - Agitator element: anchor agitator; - mobile frame on rollers with brake; - Weight: 510 KG

Condition: used, Padovan Green Filter 18 m² mobile Kieselgur stainless steel plate filter, Aisi 304 - condition: used - location: Bremen - total height: 2.950 mm - total length: 2.250 mm - total width: 1.500 mm remarks: - Filter medium: diatoms; - tank with agitator for the preparation of diatoms; - Underbody opening diameter: approx. 400 mm; Dodpet Eb Azofx Affjkk

Condition: good (used), Clamping plate with T-slots, T-slot plate, punching table, clamping plate, plate field, -T-slot plate: Mounting plate with T-slots, for hydraulic press, eccentric press... -Clamping surface: 605 x 450 mm -Inner diameter: 180 mm -Plate height: 97 mm -Groove width: 18 mm -Dimensions: see drawing in the photos -Dimensions: 605/450/H97 mm -Weight: 183 kg Dedjyx Atwspfx Affskk

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, machine/vehicle number: 3roll 3500x140 mm prepinch, control type: manual, degree of automation: manual, actuation type: hydraulic, controller manufacturer: MG, controller model: MG, number of rollers: 3, roller (bottom) diameter: 880 mm, roller (top) diameter: 950 mm, side roll diameter: 880 mm, roller length: 3,550 mm, working width: 3,500 mm, working height: 3,950 mm, sheet thickness (max.): 140 mm, sheet thickness steel (max.): 175 mm, overall weight: 200,000 kg, total length: 8,800 mm, total width: 5,100 mm, total height: 5,775 mm, power: 200 kW (271.92 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, Hydraulic Plate Bending machine planetary pinch pyramid with prebend. model MG35140V 3 roll capacity 3500x140 mm The machine was overhauled in 2024, Capacity : Plate width mm. 3500 Plate thickness mm. 140 Capacity chart in enclosed Tech data: -3 rolls driven hydraulic motorized with axial gear unit on each roll independent -Synchronized hydraulic rotation of the 3 rolls with variable speed. -Planetary design with pre-pinch fully hydraulic -Conical plate bending with hardened contrast pad -Digital position readouts of the bending rolls -Rolls installed on bearings double crown heavy duty -Overload safety hydraulic operation protection of the 3 rolls -High pressure hydraulic power pack with multi-pumps oil feed -Centralized control panel electric on wheels with joysticks and digital readouts -Emergency stop with safety system around the machine working area Rolls surface length mm. 3550 Top roll mm. 950 Dsdpfxoyzim As Affjkk Side rolls mm. 880 Electric power on hydraulic unit Hp 100 + Hp 100 Voltage 380 Vac / 50 Hz Configuration & accessories installed with the machine -Hardened surface of the 3 rolls -Conical plate bending attachment , rolls tilt with contrast roller type. -Centralized operator panel with directional joysticks electric. -Digital position readout of the bending rolls. -Emergency and safety installations, certified CE -User manuals and instruction books in English -Dimension see layout drw in enclosed

Year of construction: 2024, condition: new, Mobile panel transport cart Dodpew I Upnsfx Affekk New demo unit, year of manufacture: 2024 - Stacking of panel heights up to 1,600 mm, electrically operated - Tilt angle forward/backward 100°, electrically operated - Head joint rotation angle CW/CCW 180° - Head joint rotation angle: 360° - Load capacity 120 kg - Panel sizes up to 2,100 x 3,200 mm - Total height 2,090 mm - With 6 high-performance suction pads, width adjustable The Mobilifter ML-120 consists of: - A mobile chassis - An electric lifting and tilting system - An automatic vacuum unit - A wireless electric control - Weight 170 kg Availability: short notice Location: Flörsheim

Condition: used, Hydraulic Guillotine Shear STEINER Type HTS 30/20 R Machine No. 315 Year of manufacture: 1982 Cutting length: 3050 mm Cutting thickness: 20 mm Backgauge: 800 mm, motorized Motor power: approx. 30 kW Power supply: 400 Volts, 50 Hz - Backgauge with ELGO positioning control - Backgauge adjustment via ball screws - SICK safety light curtain at the front as reach-in protection - 3 material support arms with ball transfers - Electric foot switch - Spare blade - Oil cooler with air heat exchanger - Very robust machine with extremely solid construction Machine footprint (L x W x H): 4650 x 2610 x 3200 mm Machine weight: 27,000 kg Transport dimensions (base machine) (L x W x H): 4650 x 2610 x 3200 mm Transport dimensions (additional) (L x W x H): 3500 x 2450 x 1400 mm Total weight: 27,000 kg Good condition Machine can be inspected at our warehouse in 37235 Hessisch Lichtenau, test cuts possible. Currently, the hold-down devices are being resealed; the resulting price adjustment will be made in the coming days. Dkjdpfxsd Hxx Ao Affjk

Condition: used, HB-Therm HB-100 U1 temperature control unit, Temperature control, Liquid temperature control, Industrial temperature control, Thermolator, used machine Manufacturer: HB-Therm Type: HB-100 U1 Overall dimensions: 200 × 650 × 500 mm Year of manufacture: 2008 Technical data: Maximum operating temperature: 100 °C Dkjdpfx Aoyzmagoffek Heating capacity: 8 kW Cooling capacity: 30 kW Heat transfer medium: water

Year of construction: 1991, condition: good (used), Make: HAEUSLER Type: VRM-HY Year: 1991 Specifications Metric US Standard Rolling width 3000 mm Rolling thickness 3x toproll Ø 120 mm Rolling thickness 5x toproll Ø 150 mm Rolling thickness prebending 100 mm Top Roll Ø 910 + 820 + 740 mm Bottom Roll Ø 940 mm Side roll Ø 780 mm Number of rolls 4 Rolling speed 2 + 4 Adjustiment lower roll 200 mm/min. Adjustment side rolls 500 mm/min. Number of driven rolls 2 Power 300 kW Dimensions (Estimate) Length 8000 mm Width 5400 mm Height 5400 mm Weight Dkedpekwcc Nsfx Affek 290000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Share on

Year of construction: 1980, condition: good (used), Make: HAEUSLER Type: VRM-HY Year: 1980 Specifications Metric US Standard Rolling width 3000 mm Rolling thickness 3x toproll Ø 130 mm Rolling thickness 5x toproll Ø 140 mm Rolling thickness prebending Dksdskvm Szjpfx Affek 120 mm Top Roll Ø 950 mm Bottom Roll Ø 850 mm Side roll Ø 180 mm Number of rolls 4 Rolling speed 2 + 4 Adjustiment lower roll 0 - 400 mm/min. Adjustment side rolls 0 - 400 mm/min. Number of driven rolls 2 Power 132 + 37 kW Dimensions (Estimate) Length 12000 mm Width 5440 mm Height 5650 mm Weight 286000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1978, condition: good (used), Make: HAEUSLER Type: VRM-HY Year: 1978 Specifications Metric US Standard Rolling width 3050 mm Rolling thickness 3x toproll Ø 60 mm Rolling thickness 5x toproll Ø 70 mm Rolling thickness prebending 50 mm Top Roll Ø 630 mm Bottom Roll Ø 600 mm Side roll Ø 500 mm Number of rolls 4 Rolling speed Dkodpfx Afekvm S Nofek 0 - 5 Adjustiment lower roll 200 mm/min. Adjustment side rolls 200 mm/min. Number of driven rolls 2 Power 120 kW Dimensions (Estimate) Length 5790 mm Width 4200 mm Height 4200 mm Weight 85000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), NC horizontal boring mill with point-to-point control HEIDENHAIN TNC 124 Year of manufacture: 1982 / retrofitted with control in 1997 Spindle diameter: 150 mm Spindle taper: ISO 50 Travel distances: X-axis, table (cross): 3000 mm Y-axis, spindle head (vertical): 2000 mm W-axis, quill travel: 1100 mm Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 Dkjdpfxeyxp D Ne Affsk DE - 44143 Dortmund - Wambel / Germany

Condition: good (used), NC plate boring mill with point-to-point and linear HEIDENHAIN TNC 124 control Year of manufacture: 1975 / retrofitted with CNC control in 1997 Spindle diameter: 130 mm Spindle taper: ISO 50 T-slot clamping surface: 6000 x 3000 mm Travel distances: Dkedpfx Aeyxp Dpoffsk X-axis, table (cross): 6000 mm Y-axis, spindle head (vertical): 3000 mm W-axis, quill travel: 1100 mm Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Year of construction: 2026, condition: new, NEW - - Ideal for removing plates from your standing plate storage. - For in-plant transport of the plates to the standing or lying panel dividing saw. - The steplessly height-adjustable support surface can be exactly to the height of your panel saw. height of your panel saw. - Panels weighing up to max. 250 kg can be transported or transported or swiveled by one operator alone. Technical data: Support height - standing: approx. 120 - 340 mm - lying: approx. 890 - 1200 mm max. plate size: 5200 × 2100 mm load capacity: 250 kg Location: ex stock 54634 Bitburg - immediately available- Will be shipped for 90,- Euro net within Germany Dksdpfxsd Tyaas Affsk

Condition: new, sheet width 2550 mm 4 mm sheet thickness for stainless steel 2 mm rear stop 750 mm total power requirement 7,5 kW weight of the machine ca. 3050 kg dimensions 3300 x 2230 x 1360 mm Standard equipment: - All-steel welded construction with static and dynamic frame rigidity frame rigidity - Direct drive with brake motor - Specially alloyed cutting blades - 750 mm motorized, digitally adjusted backgauge with ball screws recirculating ball screws - Manual blade gap adjustment system - Mechanical sheet clamping system with plastic base - Work table with insert plates - foot switch for single and repeat cutting cycles - 1 x squaring arm 1000 mm long with metric scale - 2 x 800 mm front material support arms - Front stop - Finger protection - front and rear covers - Rear light guards - CE declaration of conformity Dsdpfxjyyc Azo Affokk Youtube video link: ?v=pCuKwtBIQto&ab_channel=BaestleinGmbH