Used Heating Ruler for sale (14,244)

Condition: used, Year of construction: 1997, functionality: fully functional, power: 1,000 kW (1,359.62 HP), Boiler with feed system - Year of release: 1997 - manufacturer: Komforts - Power 1 mW. - moving floor supply system with hydraulic station, - chimney, - pumps, Nwsdpfjv D Uz Eex Agzer - control, - hot water accumulator.

Condition: used, Nabertherm Nabertherm N 2260/S Chamber Furnace with Wire Heating up to 1300 °C Technical Specifications – Nabertherm N 2260/S Feature / Value Model: Nabertherm N 2260/S Njdpfx Agew Ec Egezswr Maximum temperature: 1300 °C Voltage / connection: 400 V, 3~ (three-phase current), PE (protective earth) Heating power: 75 kW Heating zones: 5-sided (sides, bottom, door, optionally ceiling) Internal dimensions (firing chamber) Dimension / Value Width (w): 1,500 mm Depth (d): 1,000 mm Height (h): 1,720 mm Floor load: 10 kg/dm² Volume: approx. 2,580 litres External dimensions (overall unit) Dimension / Value Length (L): 2,000 mm Width (W): 2,250 mm Height (H): 2,850 mm Weight: approx. 3,100 kg Condition: used Scope of delivery: (see picture) (Technical data and specifications subject to change and errors excepted!) For further questions, we are happy to assist you by phone.

Condition: used, Heating fan, heater, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating coil -Handover: in its current condition as inspected -Fan motor: missing -Manufacturer: Kampmann, air heater heat exchanger -Type: Tip 5000 -Power: kW -Fan: missing -Operating pressure: max 10 bar -Dimensions: 800/710/H740 mm Nwsdpjvrdr Nofx Agzor -Weight: 27 kg

Year of construction: 2017, condition: good (used), functionality: fully functional, For sale is a carousel oven (Paternosterofen) from the brand Eliog, model PNO 80. This oven is a custom-built solution. Designed for warming components, equipped with a carousel handling system and control cabinet. Nsdpfxeup R U Uo Agzjwr Also suitable for drying or dehydrating food and cannabis. The system was installed in 2017 and has only been used occasionally since around 2022. The plant has already been dismantled. Technical specifications: Year of manufacture: 2017 Max. component support area: 65 mm Nominal temperature: 70°C Operating temperature: 70–75°C (At 75°C the utilisation area safety limiter shuts off!) Set conveyor time: approx. 240 min Max. airflow speed: approx. 4 m/s Heating capacity: 72 kW Nominal voltage: 3*400 V, 50 Hz Fresh air supply: Ambient air at the oven Exhaust air: max. 850 m³/h Usable chamber dimensions: 4780*2200*2250 mm Workpiece carriers: 56 pcs. (oven capacity) Max. workpiece weight: 0.3 kg Transport height above floor: 400 mm Heating: 3 kW / heater element, 6 heater elements per control zone-4 (total 72 kW output) Overall dimensions: approx. 4,425*5,425*4,980 mm Space requirement: 5012.4*3919.5*5000 mm Oven weight: approx. 7,500 kg Control cabinet: approx. 450 kg (Images have been modified due to copyright reasons) Transport and loading can be organised across Europe for an additional fee upon request. Prices are plus VAT. Inspections are possible by appointment. Please contact us – our team will be glad to assist you. Part exchange or trade-in possible! Machine Purchase & Sale BUYING / SELLING PRODUCTION MACHINERY & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you interested in selling yours? For further information or to get in touch, please visit our website.

Year of construction: 1991, condition: used, Technical details: max. temperature: 1200 Grad size of opening: 450 mm container volume: ca. 80 l working depth: Kammertiefe: 600 mm voltage: 380 V total power requirement: 46 kW weight of the machine ca.: 2,1 t dimensions L x W x H: 1,6 x 1,6 x 1,46 m dimensions electric cabinet: 400 x 600 x 760 mm Electric melting furnace, crucible furnace, tiltable pouring height= 1050mm pouring Ø 80mm lining=chamot Swing out via 2x hydraulic arm Hydraulics: Manufacturer Houch Hildesheim Optionally an additional crucible can be sold, please ask. Size outside: Ø 1240mm x 1000mm Size inside: Ø 840 x 1000mm Volume of contents: approx. 260 liters Slag collection material: circulation Ø center = 940mm, size 50 x 50mm Nodou N Ak Nopfx Agzswr Material = steel is heat resistant *

Year of construction: 2022, condition: new, For sale is a hammer mill for the production of powdered goods in the spice / herb / food industry! Structure: 1 piece hammer mill 30 kW three-phase motor with reinforced bearings. Bearing housing screwed to the console. Drive shaft driven by V-belt. Sealing of the shaft passage to the housing via wiper and shaft sealing ring. In the rear wall 2 pieces flushing ports into the rotating part of the mill Four swinging feet Front door with large hinged door with four clamps and lid switch with tumbler. In the lid an O-ring groove with silicone round cord Inside the housing a sieve basket with crusher, from the outside the sieve can fix Bottom centered an outlet with appropriate connection flanges Motor 400/680 volts; IP 54 2900 rpm at 50 Hz with 3 PTC thermistors. Housing made of stainless steel (V2A) 1.4301 Drive bracket made of painted steel 4 pcs. sieve according to your choice 3 pcs. The rotor is also in V2A design, (beater with 96 platelets) Rotor can be turned 180°, in addition, the beater platelets can be turned 1 time. For this purpose, we recommend balancing after turning. 1 piece feeding screw for hammer mill with gear motor with 1,2 kW screw equipped with two cleaning balls at the hinged lid lid is equipped with lid switch and tumbler insertion hopper at the screw in rectangular design 1 piece switch cabinet equipped with two frequency converters for infinitely variable speed control speed display beater 3 PTC thermistor sensors as protection against overheating of the motor. Sensor for vibration protection Integration of cover switches Switch cabinet in stainless steel Emergency stop, main switch 1 piece Cooling or heating jacket on the rear wall of the mill housing Welded seams pickled and glass beads blasted on the outside. Steel parts, such as motor and motor console primed and painted according to RAL 1013. Attention: It must be ensured that no metal parts enter the mill! Total price of the plant described above price 145.000 € superstructure: 1 piece Hammer mill 30 kW three-phase motor with reinforced bearings. Bearing housing screwed to the console. Drive shaft driven by V-belt. Sealing of the shaft passage to the housing via wiper and shaft sealing ring. In the back wall 2 pieces of flushing connections into the rotating part of the mill. Four swinging feet Front door with large hinged door with four clamps and lid switch with tumbler. In the lid an O-ring groove with silicone round cord In the inside of the housing a sieve basket with crusher, from the outside the sieve can be fixed At the bottom in the middle an outlet with a corresponding connection flange. Motor 400/680 Volt; IP 54 2900 rpm at 50 Hz with 3 PTC thermistors. Housing made of stainless steel (V2A) 1.4301 Drive bracket made of painted steel 4 pcs. screens of your choice 3 pieces rotors The rotor is also in V2A design, (beater with 96 plates) rotor can be rotated by 180 Nwjdpfx Aopz H D Ijgzjr the beater plates can be turned 1 time. be turned. For this purpose, we recommend balancing after turning. 1 piece Feeding screw for hammer mill with gear motor with 1,2 kW Screw equipped with two cleaning balls on hinged lid lid is equipped with lid switch and tumbler feeding hopper at the screw in rectangular design 1 piece switch cabinet equipped with two frequency converters for stepless speed control speed indicator beater

Condition: used, tank capacity: 8,000 l, GENERAL Equipment: Level indicator (without guarantee), crane lugs Design: upright Remarks: Manhole diameter (cylinder): approx. 420 x 320 mm; 2 thermoplates in the cylinder area Internal diameter: 1,800 mm Total height: 3,925 mm Heating/cooling: available Max. permissible operating overpressure: 6.0 bar Support design: feet Location: external storage Technical documentation: drawing Cylinder temperature control: thermoplate Volume: 8,000 liters Product contact material: V2A 1.4301 (AISI304) Condition: factory new Cylindrical height: 2,976 mm Njdsx Dmb Tspfx Agzowr TANK Number of feet: 3 FEATURES Manhole / dome: in the cylinder, in the top (DN 400) Outlet: DN50 DIN 11851 MATERIAL SPECIFICATION Outer surface: marbled

Condition: excellent (used), Thermo Scientific Vötsch Type: UT 6420 For sale is a professional laboratory and industrial drying oven / heating cabinet, Thermo Scientific / Vötsch Industrietechnik – Type UT 6420. This unit is suitable for drying, heating, tempering, and heat treating materials and components at precisely controlled temperatures up to 300 °C. Typical areas of application include laboratory, industry, workshop, research, electronics, and materials testing. Nwsdpfsx Hf Uaox Agzer The stainless steel chamber ensures uniform heat distribution and is designed for continuous operation. Chamber: Stainless steel with insertion racks External dimensions (approx.): 170 × 70 × 80 cm (H × W × D) Technical specifications: Manufacturer: Thermo Scientific / Vötsch Industrietechnik Type: UT 6420 Max. temperature: 300 °C Temperature control: Electronic (Heraeus Kelvitron) Rated voltage: 3/N/PE 400 V, 50/60 Hz Rated current: 6.6 A Power consumption: approx. 4.2 kW Protection class: IP20 Weight: approx. 200–230 kg Condition: used Scope of delivery: (see photo) (Specifications are subject to change and errors; details are non-binding!) For further questions, we are happy to assist you by phone.

Condition: good (used), Heating fan, electric heater, heating, electric heater, electric heating fan, heat exchanger, air heater, air heater, duct air heater, duct air heater -JEVi .: 21023007 -Type: EFFK -Power: 30 kW Nodpfxjfixa Eo Agzjwr -Voltage: 3 x 476 V -Dimensions: 460/350/H565 mm -Weight: 29 kg

Condition: excellent (used), Thickness of the format 8 - 60 mm (10 - 50 mm when corners are rounded) Width of the format min. approx. 75 mm Format length min. approx. 120 mm / 180 with corner beading Edge thickness 0.4 - 3.0 mm / 8.0 mm Pre-milling range 0 - 3.0 mm, stepless Edge width max. board thickness + 4 mm (2+2) Connection power 9.75 kW Nwjdpeurf Stofx Agzor Feed speed 9/15 m/min Pneumatic connection 6 Bar Net weight 1350 Kg

Condition: new, Year of construction: 2023, functionality: fully functional, power: 114 kW (155.00 HP), fuel: diesel, Equipment: documentation/manual, type plate available, The REMKO "CLK 120" heating cannon is a powerful heater suitable for use in warehouses, workshops, marquees, materials, greenhouses, and more. Nsdpfxexgbbto Agzewr Currently, 3 units are immediately available from stock. Condition: New / unused from warehouse clearance / insolvency Scope of delivery: - 1 Remko CLK 120 heating unit with oil burner - 1 Roth mobile heating oil tank 1000 L - 1 room thermostat with connection cable Rated heat load: 114 kW Air output: 8050 m³/h Fuel: heating oil EL Fuel consumption: max. 11.2 L/h Flue gas loss: max. 9% Flue gas connection: Ø 200 mm Air outlet: Ø 500 mm Connection voltage: 230 V Dimensions (H/W/D): approx. 1350 x 920 x 2100 mm Weight: approx. 296 kg The machine can be viewed on site by appointment. All information without guarantee. Subject to prior sale.

Condition: used, Dimensions (LxBxH): 135 x 55 x 102 cm Boe-Therm Temp 300 – Oil Heating Unit Serial number: 83054 Type: Temp 300-36-4 VE General Data - Medium: Thermal oil - Oil capacity: 98 liters - Max. temperature: 300 °C - Heating capacity (kW): 36 kW - Voltage: 3 x 400 V / 24 V - Frequency: 50 Hz - Power consumption: approx. 54.8 A - Control system: Electronic panel with digital display and control buttons - Safety features: Overtemperature, oil level, and pressure monitoring Applications - Temperature control in plastics industry (injection moulding, extrusion) - Metal processing (heating systems, forming presses) - Woodworking (veneer presses, laminating presses) - Other processes requiring stable and high temperatures Function The unit heats thermal oil and circulates it through external circuits (such as moulds, press plates, or installations). This ensures a constant temperature up to 300 °C, with high precision and reliability. - Documentation available: No - CE certificate present: No - Serial number: 83054 - Transport dimensions: 1350mm x 550mm x 1020mm (l x w x h) - Transport packages [pcs.]: 1 Njdpexpva Asfx Agzowr Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, tank capacity: 1,000 l, GENERAL Equipment: Level indicator (without guarantee) Design: upright Remarks: Manhole diameter: approx. 420 x 320 mm Internal diameter: 820 mm Total height: 2,350 mm Heating/Cooling: available Max. permissible operating overpressure: 6.0 bar Base type: feet Location: external storage Technical documents: drawing Cylinder tempering: Thermoplate Volume: 1,000 liters Product-contacting material: V2A 1.4301 (AISI304) Condition: factory new Cylindrical height: 1,238 mm TANK Number of feet: 3 pcs EQUIPMENT Nwodpfex Dmbgex Agzor Manhole / Dome: in the cylinder Outlet: DN50 DIN 11851 MATERIAL CHARACTERISTICS Exterior surface: marbled

Year of construction: 2015, condition: new, Beer short-time-heating steamheated capacity 2000 l/h Nwedscltpyopfx Agzjr preheating, backcooling and icewaterplateheatexchanger

Condition: good (used), Year of construction: 1981, Heating elements control unit Njdsb A H Uzjpfx Agzjwr -for: heating elements -Connection: from the electrode welding machine -Regulator and recorder -Handover in its current condition as inspected -in transport crate -Weight: 80 kg

Condition: new, Year of construction: 2023, functionality: fully functional, power: 150 kW (203.94 HP), fuel: diesel, Equipment: documentation/manual, type plate available, The REMKO "CLK 150" heat cannon is a high-performance heater suitable for use in halls, workshops, marquees, materials, greenhouses, and more. Currently, 3 units are in stock for immediate delivery. Condition: New / unused from warehouse clearance / insolvency Scope of delivery: - 1 Remko CLK 150 heater with oil burner - 1 Roth mobile heating oil tank, 1000 L - 1 Room thermostat with connecting cable Nominal heat load: 150 kW Air output: 9710 m³/h Fuel: EL heating oil Maximum fuel consumption: 14.8 L/h Flue gas losses: max. 9% Nsdpfx Ajxli I Sogzjwr Flue gas connection: Ø 200 mm Air outlet: Ø 500 mm Connection voltage: 230 V Dimensions (H/W/D): Approx. 1350 x 920 x 2100 mm Weight: approx. 312 kg The machine can be inspected on site by appointment. All information provided without guarantee. Subject to prior sale.

Condition: used, tank capacity: 2,300 l, GENERAL Design: upright Remarks: The height-adjustable ball screws are missing on 3 feet; 1 heating connection has been cut off Speed: 175 / 365 rpm Outer diameter: 1,500 mm Inner diameter: 1,440 mm Total height: 2,700 mm Heating/cooling: present Power: 0.2 / 0.92 kW Top: bolted lid with folding segment Agitator: propeller Mounting style: feet Location: Bremen Cylinder tempering: double jacket Nsdsx Dma Nopfx Agzswr Volume: 2,300 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 1,450 mm TANK Number of feet: 4 pcs EQUIPMENT Note: Discharge connection cut off Discharge: 65 mm MATERIAL SPECIFICATION Jacket material: V2A 1.4301 (AISI304) Feet material: stainless steel AGITATOR 1 Agitator manufacturer: Stelzer Voltage: 380 Volt Agitator arrangement: eccentric in top head

Condition: good (used), Year of construction: 1981, Heating elements control unit -for: heating elements -Connection: from the electrode welding machine -Regulator and recorder -Handover in its current condition as inspected Nsdpfx Agsb A Ruijzowr -in transport crate -Weight: 95 kg

Condition: excellent (used), Control unit, heating controller, osmosis control - control box, heating controller, heating control device Nwjdpfxjx Hxcde Agzsr -Manufacturer: Sauter, equitherm 100 heating controller with accessories, unused, original packaging -Type: EQJW 41 D 10 -Temperature sensor: EGT 30 B 10 / EGT 31 B 10 -Number: 3x heating controllers available -Price: per piece -Transport dimensions: 210/210/H165 mm -Weight: 2 kg/piece

Condition: good (used), Screw-in heating element, electric heater, electric radiator, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, heating cartridge, high-performance heating cartridge -Type: HLP 220 V 500 W -Length: 165 mm -Diameter: 13 mm -Price: per piece -Quantity: 4x Available Nsdpfxjb A Sdas Agzowr -Weight: 0.2 kg

Condition: good (used), Screw-in heating element, electric heater, electric radiator, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, heating cartridge, high-performance heating cartridge -Type: HLP 230V 500W Nwodpfx Agjb A Sc Uezer -Length: 90 mm -Diameter: 13 mm -Price: per piece -Quantity: 9x Available -Weight: 0.2 kg

Condition: good (used), Screw-in heating element, electric heater, electric radiator, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, heating cartridge, high-performance heating cartridge -Type: HLP 220V 800W Nwedpfjb A Sdbjx Agzsr -Length: 140 mm -Diameter: 13 mm -Price: per piece -Quantity: 12 available -Weight: 0.2 kg

Condition: excellent (used), Heating hose, adhesive melter, gluing machine, hot glue machine, industrial hot glue gun Nwjdpfx Agjb A Harozjr -Condition: unused -Type: FE-H/PN2-1.8-13-PT100 -Connection: 230 V 50 Hz 320 W -Heating capacity: 200 °C -Total length: 2000 mm -Weight: 3 kg

Condition: excellent (used), Year of construction: 2014, Heat exchanger, construction heating, construction dryer, heating, hall heating, hot water exchanger, fan heater, heating, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating coil -pure heat exchanger, only usable in conjunction with a heating unit (e.g. Wacker Neuson HP 252) -Type: HX 60 -Power: 43.5 kW -Quantity: 8 pieces available -Price per piece -Dimensions: 660/720/H1065 mm Nwodpfxoghh Txj Agzsr -Weight: 106 kg

Condition: good (used), Pipe heating device, pipe burner, pipeline construction burner Nwjdpfx Aeb A Ix Sjgzjr -Max. diameter: 250 mm -Burner for steel pipeline construction -Propane -Transport crate -Dimensions: 600/1400/H330 mm -Weight: 90 kg