Used Heating Ruler for sale (15,348)

Condition: ready for operation (used), Year of construction: 2019, operating hours: 10,613 h, functionality: fully functional, machine/vehicle number: B4/19-002/LV, total height: 2,591 mm, total length: 2,990 mm, total width: 2,438 mm, fuel: liquefied natural gas (LNG), overall weight: 5,000 kg, type of cooling: water, empty load weight: 4,900 kg, Equipment: documentation/manual, As part of the demonstration, the compression in all cylinders can be shown to be 15 bar. Electrical power – 50 kWe Thermal power – 80 kW Gas consumption – 14.6 Nm3/h Engine manufacturer – MWM Number of cylinders – 4 Godpfoz Rxgyex An Ejui Generator manufacturer – Marelli Type – MJB 225 SA4 Power – 62.5 kVA Rated power – 50 kW Frequency – 50 Hz Voltage – 400 V

Condition: used, Machine: Speidel Tank with heating approx. 65 ltr. Guedpfx Anj Akfuaj Eei

Condition: ready for operation (used), Year of construction: 2022, operating hours: 3,200 h, functionality: fully functional, power: 35 kW (47.59 HP), Spanner wood gasifier HKA 35 for sale A Spanner wood gasifier HKA 35, manufactured in 2022, is for sale. The system is in good and well-maintained condition and is currently still in operation. An inspection and demonstration under operating conditions are possible after prior arrangement. The system is operated with wood chips. A major advantage: independence from the gas and energy market. Technical data: Manufacturer: Spanner Type: HKA 35 Year of manufacture: 2022 Electrical output: 35 kWh Thermal output: 80 kWh Operating hours: approx. 3,200 h The sale is solely due to the seller's retirement. The system has always been operated with care. All customer service and maintenance work has been carried out regularly. Godpo Ait Aijfx An Eeui Location: 88339 Bad Waldsee Price: €120,000 (negotiable) For further information or to arrange an inspection appointment, please do not hesitate to contact me. Private sale.

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: 30111, functionality: fully functional, operating hours: 123 h, The OekoRona M is an electrostatic precipitator that significantly reduces fine dust emissions from automatic wood-fired heating systems with outputs between 300 kW and 3 MW. The precipitator has a modular design and can be installed in both new and existing systems. The mechanical cleaning system enables fully automatic operation of the precipitator and reduces maintenance to a minimum. OekoRona M facts: - for automatically fed wood-fired heating systems up to 3 MW - automatic, mechanical cleaning - tested separation efficiency - low operating costs - retrofittable - suitable for overpressure and underpressure operation - bypass - low energy consumption - various designs - flexible ash removal - operating optimization through remote maintenance Manufacturer: OekoSolve AG Type: OekoRona M Identification number: ORM-30111 Specified electrical power consumption: 1.65 kW Temperature class: T250 (according to the specified marking) Operating principle The flue gas flows through the tubes of the filter system, which are equipped with ionization electrodes. The high voltage electrically charges the fine dust particles, which then deposit on the inner surfaces of the separation tubes. The mechanical cleaning system automatically removes the deposited dust particles, which then fall into a lower collection container. An automatic discharge screw can transport the dust to an external collection container. Key technical features Feature Description Application area Automatic biomass-fired heating systems Boiler output range Approx. 300 kW to 3 MW for the product series Dust separation Electrostatic Cleaning Automatic mechanical cleaning Flue gas temperature Maximum 250 °C Operating mode Suitable for overpressure and underpressure systems Bypass Integrated bypass Operation Touchscreen control Dust removal Collection container; screw discharge, depending on the design or optional Condensation protection Electrical or hydraulic heating, depending on the design Guedpo Aba Rgefx An Eei Installation After the boiler in the boiler room

Condition: like new (used), Year of construction: 2018, operating hours: 865 h, functionality: fully functional, For sale: Jenbacher gas engine JMS 420 GS-B.LC. A used, high-performance Jenbacher JMS 420 GS-B.LC gas engine (series 4) for stationary use in combined heat and power (CHP) plants is for sale. Manufacturer: INNIO Jenbacher. Type: JMS 420 GS-B.LC. Electrical output: approx. 1,400–1,500 kW (depending on gas type and configuration). Gas type: natural gas / biogas / sewage gas. Year of manufacture: 2018. Operating hours: 865 h. Condition: engine preserved. Scope of delivery: engine including control panel, exhaust system, etc. Special features: high electrical and thermal efficiency, reliable MWM/Jenbacher technology for continuous operation. Location: 48599 Gronau. Availability: immediately / by arrangement. Price: negotiable (upon request). If you are interested, have questions about technical details, or would like to arrange a viewing appointment, please do not hesitate to contact us. Gusdpfx Ane Ahnzbo Eji

Condition: excellent (used), heating capacity: 85kW fan capacity: 6300 m3/h fuel: wood-based waste thermostat fan motor power: 1.5kW two hot air outlets Gujdpfx Anj Aip H He Eji outlet diameter: 250mm elbows included chimney outlet diameter firebox depth: 800mm firebox width: 550mm external dimensions: 1300x780x1970mm

Condition: good (used), functionality: fully functional, BDC 100T Hydraulic Moulding Press | Heated Platen Compression Press BDC 100T hydraulic moulding press for sale with heated platens. Approx. 100 tonne compression press for rubber, plastics, composites and laminating applications. Manufacturer: BDC Machine Type: 100T Moulding Press with Heated Platens Condition: Decommissioned. Good 100 Tonne Heated Platen Compression / Moulding Press This BDC 100T Hydraulic Moulding Press is a heavy-duty industrial press designed for heated platen moulding, compression moulding, forming, bonding and laminating applications. This machine is suitable for use in rubber moulding, plastics processing, composites, bonding, pressing, laminating and heated forming operations, making it a versatile addition to manufacturing, production and specialist fabrication workshops. Key Features 100 tonne hydraulic press capacity Heated upper and lower platens Heavy-duty industrial construction Suitable for compression moulding and heated platen pressing Ideal for rubber, plastics, composites and laminated materials Hydraulic pressing action for controlled force application Well-suited to production, R&D and workshop environments Machine Description The BDC 100T Hydraulic Moulding Press is designed for applications requiring high pressure and controlled heat. The heated platens allow materials to be formed, cured, bonded or compressed under consistent pressure, making the machine suitable for a wide range of industrial moulding and manufacturing processes. Hydraulic moulding presses of this type are commonly used for rubber moulding, plastic compression moulding, composite forming, gasket production, bonded components, laminating, hot pressing and specialist materials processing. Approximate Technical Specification General Manufacturer: BDC Machine Type: Hydraulic moulding / compression press Press Capacity: 100 tonnes Press Action: Hydraulic Construction: Heavy-duty industrial press frame Rams: 1 Guides: 4 Gjdpfxezi Hcho An Eeui Platen Type: Heated platens Platen Arrangement: Upper and lower heated work platens Working Applications Compression moulding Rubber moulding Plastic moulding Composite pressing Laminating Hot pressing Bonding applications Heated platen forming Production and workshop moulding work Heated Platen System Heating: Heated platen system Platen Size: 510 x 510mm Temperature Control: Fitted with platen temperature control Platen Use: Suitable for controlled heat and pressure applications Press System Power: Hydraulic press system Force: Approx. 100 tonnes Operation: Hydraulic pressing cycle Pump Size: 2.2kW Ram Diameter: 190mm Distance Between Guides: 540mm (Width) Max Daylight: 250mm Typical Configuration: Heavy-duty hydraulic moulding press with heated work platens Summary The BDC 100T Hydraulic Moulding Press is a 100 tonne heated platen compression press used for rubber moulding, plastic compression moulding, composite pressing, laminating, bonding and hot press applications. It features hydraulic pressing action and heated platens, making it suitable for industrial manufacturing, workshop production and specialist materials processing. Important Notice Note: Specifications and information provided in this listing are supplied in good faith; however, their accuracy cannot be guaranteed. Specifications are approximate.

Condition: excellent (used), Year of construction: 2018, operating hours: 123 h, power: 770 kW (1,046.91 HP), heating capacity: 810 kW (1,101.29 HP), temperature: 110 °C, Equipment: hot water, Mawera Type FFU700RIA, fully automatic wood chip heating system with underfeed stoking. Output: 810 kW. Domestic hot water system, supply temperature max. 110°C. Year of manufacture: 2018. Components: boiler body, combustion chamber and pneumatically cleaned heat exchanger, screw conveyor, automatic ash removal screw, ash separator, multi-cyclone, flue pipes for connection to the chimney, flue gas fan, operating manual, machine manual, control unit, control cabinet. It can be inspected on-site in Germany. Already dismantled; the firebox is to be relined with refractory bricks. Gusdpfo Abayusx An Eei

Condition: used, mileage: 37,750 km, power: 160 kW (217.54 HP), color: black, gearing type: automatic, Equipment: ABS, air conditioning, airbag, central locking, power assisted steering, = Additional Options and Accessories = - Passenger airbag - Electronic window control - left - Electronic window control - right - Driver airbag = Notes = - To ensure you receive the best possible advice, we kindly request that you schedule an appointment. Mr. F. Huber will be happy to assist you. NIGHT BLACK, FABRIC BLACK / ANTHRACITE, DECORATIVE ELEMENTS - PLASTIC AND CARBON OPTIC SILVER, SMARTPHONE INTEGRATION PACKAGE, CONNECTIVITY PACKAGE MID, LIGHT AND SIGHT PACKAGE, MB-CONNECT SERVICES FOR NAVIGATION, MBCONNECT EV FUNCTIONS (HERMES), SMARTPHONE INTEGRATION CARPLAY, SMARTPHONE INTEGRATION ANDROID AUTO, ACTIVE PARKING ASSIST, ACTIVE LANE KEEPING ASSIST (CAMERA), COLLISION WARNING SYSTEM WITH ACTIVE BRAKING FCW-STOP, GPS ANTENNA, CHARGING CAPABILITY, KNEE AIRBAG, DOUBLE CUP HOLDER, RAIN SENSOR, ECALL EMERGENCY CALL SYSTEM (HERMES), HERMES COMMUNICATION MODULE LTE, HARD DRIVE NAVIGATION, LIVE TRAFFIC CAPABILITY (HERMES), MBCONNECT CONNECTIVITY AND CHARGING PLUS, DUAL-CLUTCH TRANSMISSION AUTOMATIC 8-SPEED, STEERING WHEEL SHIFT PADDLES / STEERING WHEEL SHIFT PADDLES - PAINTED, CRUISE CONTROL, TOUCHPAD ONLY, TIRE PRESSURE MONITORING SYSTEM (TPMS) HIGH LINE / MID LINE, COMFORT SUSPENSION, TRAFFIC SIGN RECOGNITION, DIGITAL RADIO STANDARD DAB (DIGI. AUDIO BROADCAST), SUN VISOR WITH ADDITIONAL FUNCTION, AIR CONDITIONING, ROOF LINING FABRIC GRAY, HEADLIGHTS FOR RIGHT-HAND TRAFFIC, WARNING VEST DRIVER, HEATED DRIVER AND PASSENGER SEATS LEFT AND RIGHT, PARKING ASSIST WITH CROSS TRAFFIC FUNCTION (UN R79), ADJUSTMENT OF STEERING WHEEL CONTROLS FOR ASSISTANCE SYSTEMS, I-SIZE MARKING (ISOFIX SUCCESSOR), EXHAUST GAS CLEANING EURO 6 TECHNOLOGY, EXHAUST SYSTEM WITH GPF GENERATION 2.0, EXTERNAL NOISE SOUND GENERATOR FOR HYBRID AND EV, DRIVING PROGRAM SELECTOR (AGILITY SELECT), TRANSMISSION AUTOMATIC, SPORT STEERING WHEEL - PURE, REAR SEAT BELT STATUS DISPLAY, PASSENGER SEAT WITH WEIGHT RECOGNITION, FLOOR MATS - VELOUR, COMPOSITE REAR AXLE 1st owner, We would be happy to provide you with a quote for the trade-in of your used vehicle. If you would like to lease or finance your vehicle, we will gladly provide you with an individual offer. Further information can be found on our website... Errors and omissions excepted, subject to prior sale! Tel. - ESP, particulate filter, warranty, rain sensor, electric side mirrors, Bluetooth, on-board computer, hands-free system, multifunction steering wheel, Isofix, light sensor, traction control, non-smoker vehicle, start/stop system, lane keeping assist, emergency brake assist, armrest, hill start assist, drowsiness warning, emergency call system, tire pressure control, shift paddles, voice control, touchscreen, USB, traffic sign recognition, steel rims, distance warning, WLAN / Wifi hotspot, Apple CarPlay, Android Auto, fully digital instrument cluster, speed limiter, plug-in hybrid, new MOT, navigation preparation, distance warning = Further Information = Gjdpfxo Akizrj An Eoui Year of manufacture: 2022 Engine displacement: 1,332 cc Number of previous owners: 1 Please contact Tobias Ebert for further information.

Condition: used, VÖTSCH Vötsch VT³ 7012 S2 Temperature shock test chamber with two temperature zones 125 liter test chamber volume, water-cooled For sale is a used cold and thermal shock test chamber from Vötsch Industrietechnik GmbH. The system is used for testing components, electronic parts, and materials under rapid temperature changes. Features a digital touchscreen control and stainless steel test chamber. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Type: VT³ 7012 S2 Year of manufacture: 2018 Operating hours: approx. 763 hrs Test chamber volume: approx. 125 liters (model specification) Temperature zones: 2 Cooling: water-cooled Temperature ranges: Warm chamber: 0 to +220 °C Cold chamber: -85 to +75 °C Temperature ranges according to workshop protocol. Electrical data: Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 10 kW Rated current: 25 A Refrigerant according to nameplate: R449A: 1.70 kg R23: 1.27 kg Gujdpfx Ane Aiucqs Esi Max. low pressure: 22.5 bar(g) Max. high pressure: 25 bar(g) Stand pressure R23: 14 bar(g) Equipment: Two temperature zones for cold and thermal shock testing Stainless steel test chamber Test chamber door with viewing window Interior lighting Digital touchscreen control Temperature displays Water-cooled refrigeration system Cooling water connections for supply and return RS232 interface according to workshop protocol Application areas: Temperature shock testing Thermal cycling Electronics and component testing Material testing Environmental simulation Quality assurance Research and development Condition: Used Optical condition according to pictures. Scope of supply: 1 × Vötsch VT³ 7012 S2 temperature shock test chamber Existing equipment according to pictures. Important note: For the safety of our customers, the following work will be carried out on the offered test and climate systems in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection The table shown in the photos or other items not explicitly mentioned are not included in the sale. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, Year of construction: 2019, machine/vehicle number: 197341119, input voltage: 400 V, input frequency: 50 Hz, pressing force: 120 t, table width: 1,400 mm, table length: 3,200 mm, ITALPRESSE XL/8-S – Thermoil-heated platen veneer press Year of manufacture: 2019 Machine number: 197341119 Press area: 3,200 x 1,400 mm Pressing force: 120 tons Heating: Thermoil with electric boiler Electrical connection: 400 V / 50 Hz Gusdpe Agxfgefx An Eei Hydraulic veneer press with control unit and hydraulic unit, as shown in the photos. Press area and pressing force according to the delivery note; year of manufacture and machine number according to the nameplate. Location: Basel area, Switzerland. Inspection possible until early December 2026 by appointment. Dismantling and removal between December 8th and 18th, 2026, after coordinating a schedule. Price upon request. Scope of delivery and current operating condition to be agreed upon. Subject to change and errors.

Year of construction: 2014, condition: like new (used), Heating tunnel for drying footwear. Guodpfoz Hw D Ujx An Eji

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, heat output: 34 kW / 29,900 kcal/h heating capacity: 29 kW / 25,000 kcal/h air flow rate: 2200 m3/h fan electrical power: 0.15 kW Gjdpfx Ao Adtbdjn Esui fuel: solid fuel of wood origin 170 kg year of manufacture: 2005 CE marking 220 V length: 90 cm, width: 56 cm, height: 155 cm

Condition: used, Year of construction: 1998, power: 3.3 kW (4.49 HP), Manufacturer: LAUDA Dr. R. Wobser GmbH & Co. KG Equipment: Heat transfer system Type: TR 400 HK Serial No.: M16 128 Year of manufacture: 1998 Guodpfx Ans Aiubwj Esi Heat transfer medium: Water Permissible temperature range: up to 140 °C Filling volume: 30 liters Voltage: 400 V / 3-phase Power: 1.5 kW Frequency: 50 Hz Protection class: IP54 If you have any questions or require additional images and information, please do not hesitate to contact us. An inspection can be arranged at any time.

Condition: used, Mytron Type: WT 850 Mytron Drying Cabinet The WT 850 drying cabinet is used for the simultaneous drying of several products or auxiliary devices in the semiconductor industry. Due to its robust design (box-profile frame) and the use of stainless steel for the heating chamber, the WT 850 drying cabinet can be used universally. The rolling cart allows for easy loading and unloading of the WT 850 drying cabinet. An exhaust nozzle with a regulating flap allows the cabinet to be connected to a central extraction system. Technical Data: External dimensions: Width 1145 mm x Height 1880 mm x Depth 1810 mm Dimensions of the heating chamber: Width 850 mm x Height 690 mm x Depth 1410 mm Volume of the heating chamber: approx. 830 liters Weight: approx. 230 kg, cart 50 kg Temperature range: 10°C above ambient temperature to +120°C Spatial temperature consistency: ± 1°C Temporal temperature consistency: ± 1°C Mains connection: 3NPE AC 50 Hz 400 V, 16 A CEE plug Power consumption: 4.5 kVA Fusing: 3 x 16 AT, 1 x 6 AT Control: Digital controller Safety device: adjustable over-temperature protection Gjdpjzd R Tmjfx An Eoui Through-hole: Exhaust nozzle 100 mm with regulating flap at the top Intake nozzle 100 mm with regulating flap at the top Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Year of construction: 2020, condition: used, Manufacturer: KAPP Model: KF3-1500-1 Year: 2020Type: shell-and-tube heat exchanger / tubular heat exchanger Condition: new (declassified) – never put into production. Material: 316L stainless steel Heat transfer surface area: 2 m² Original working fluid: steam, Group 2 (tube) / 70 per cent glycol, Group 2 (shell) Operating pressure: -1/8 bar (tube) / -1/6 bar (shell) Operating temperature: 180 °C (tube) / 150 °C (shell) Test pressure: 17.6 bar (tube) / 16.3 bar (shell) Volume: 7 L (tube) / 10 L (shell) Nominal diameter: 85 mm Heat exchanger length: 1,440 mm Outer diameter: 130 mm Guedpfxez Iubts An Eji A bundle of around thirty tubes, flanged tube sheet Heat exchanger with expansion joint (bellows) Flanged connections on the heat exchanger side (inlet and outlet) 2 stainless steel mounting brackets Unladen weight: approximately 50 kg

Condition: used, Year of construction: 2011, functionality: fully functional, nominal heat output: 850 kW (1,155.68 HP), tank capacity: 7,350 l, Equipment: documentation/manual, hot water, type plate available, Hot water boiler system Polzenith 850 kW – Year of manufacture 2011 – fully functional For sale is a hot water boiler system from the manufacturer Polzenith, manufactured in 2011. The system is currently in operation and fully functional. It will be available from mid-2027. Technical data • Manufacturer: Polzenith • System type: Hot water boiler system • Machine type: 05.617 • Year of manufacture: 2011 • Rated thermal output: 850 kW (more depending on the fuel) • Water volume: 7,350 liters • Special function: LUVO 3 (oxygen control via lambda sensor) • Electrical connection power: 55 kW / 125 A • Electrical rated power: 58 kW / 120 A Gjdpfxe Aaz Eco An Esui • Electrical documentation: available • Operating condition: fully functional, currently in operation • Overall condition: The system is in used condition, appropriate for its age. • Expected availability: from mid-2027 Scope of offer The following system components are included in the offer: • Hot water boiler • Chimney • Ash auger & scraper (without container) • Fuel feed system • Fuel bunker with four hydraulic slides • Pressure maintenance • Automatic make-up water supply Not included in the offer • External water storage tank • Dismantling of the system and all components • Transport and delivery Dismantling and collection The dismantling of all components will be carried out on site by the buyer. The handover of the system is expected to be possible from mid-2027 after prior coordination. Inspection and contact An inspection of the system is possible after prior appointment arrangement, as long as it is still in operation. If you are interested or have any questions, please do not hesitate to contact us.

Condition: used, functionality: fully functional, power: 30 kW (40.79 HP), input voltage: 400 V, input current: 45 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 1,320 °C, inner dimension length: 950 mm, inner dimension width: 500 mm, inner dimension height: 400 mm, overall weight: 900 kg, number of chambers: 1, Equipment: CE marking, documentation/manual, Electrically heated chamber furnace for hardening or preheating forged parts. The furnace is in excellent condition and has been used very little. Maximum temperature: 1,320°C Power: 30 kW Thermocouple: Type S with a 0.35mm diameter in the ceramic support tube Temperature control: JUMO dTron 304 controller Gedpfx Anoz H I N Is Ejui Usable dimensions: 950 x 400 x 500 mm (length x height x width)

Condition: ready for operation (used), Year of construction: 2017, Vötsch VAW 60/100 Heat Oven / Heating Cabinet / Furnace Guedpfewykz Sox An Esi Internal dimensions: 600mm x 1000mm x 600mm (W x D x H) External dimensions: 1800mm x 1800mm x 2200mm (W x D x H) Rated temperature: 650 °C Year of manufacture: 2017 Nominal power: 20 kW You are welcome to arrange a viewing. We can organize cost-effective shipping for you upon request. You will receive a proper invoice. For international customers, a net invoice can be issued provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop to see more of our offers. All listed company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Deviations from technical data as well as errors in the description of the item may occur and are reserved.

Condition: used, VÖTSCH Vötsch VT³ 7012 S2 Industrial temperature shock test chamber with two temperature zones, 125-liter test chamber volume, and digital touchscreen control For sale is a Vötsch cold and heat shock test chamber of the type VT³ 7012 S2. This unit is suitable for testing components, electronic components, and materials under rapid temperature changes. The hot chamber has a temperature range of +50 to +220 °C, and the cold chamber has a temperature range of −80 to +70 °C. The test chamber has two temperature zones, a stainless steel test chamber, and a digital touchscreen control for setting and monitoring test programs and test cycles. Technical data: Godpfs Agm Ucjx An Esui Manufacturer: Vötsch Industrietechnik GmbH Model / Type: VT³ 7012 S2 Product type: Cold and heat shock test chamber / Temperature shock chamber Test chamber volume: approx. 125 liters (model specification) Temperature zones: 2 Operation: Digital touchscreen Weight: approx. 1,000 kg Temperature ranges: Hot chamber: +50 to +220 °C Cold chamber: −80 to +70 °C Temperature ranges according to technical model specifications. Electrical data: Rated voltage: 3/N/PE AC 400 V ± 10 % Mains frequency: 50 Hz Rated power: 10 kW Rated current: 25 A Refrigerant: R404A: 1.70 kg R23: 1.27 kg Pressure specifications: Maximum low pressure: 22.5 bar(g) Maximum high pressure: 25 bar(g) Standby pressure: 14 bar(g) Equipment: Two temperature zones for cold and heat shock testing Stainless steel test chamber Insulated test chamber door with viewing window Interior lighting Air circulation system with fans Digital touchscreen control with graphical user interface Digital temperature displays RS232 interface RS485/RS422 interface Connection options for external measuring and control functions Scope of supply: 1 × Vötsch VT³ 7012 S2 temperature shock test chamber with integrated touchscreen control and existing equipment as shown in the picture. Any further accessories not shown are not part of the offer. Condition: Used Optically well-maintained condition with typical signs of wear. Condition and scope of supply, see pictures. Tools, machines, and other items not explicitly mentioned are not part of the sale. Subject to changes, errors, and prior sale. We will be happy to answer any further questions by telephone.

Condition: new, Year of construction: 1988, For sale: a mobile industrial fan from the times of the GDR, manufactured by VEB MAW Armaturenwerk Wehrsorf (Zittau), with a 0.75 kW motor from the USSR. Robust steel construction on wheels – ideal for dust extraction, blowing, local ventilation, or cooling machines. Technical specifications: • Airflow: 1020 m³/h • Total pressure: 834 N/m² • Static pressure: 681 N/m² • Density: 1.20 kg/m³ • Speed: 2800 rpm • Power consumption: 0.5 kW • Maximum operating temperature: 35°C • Year of manufacture: not fully determined – probably 1980–1990 Motor: • Type: АИР71А2УЗ • Power: 0.75 kW Guedpfxoz Sb Dfo An Eoi • Speed: 2820 rpm • Voltage: 220/380 V • Protection class: IP54 • Made in: USSR Advantages: • Compact and mobile design • Efficient drive, ready for operation • Suitable for workshops, paint shops, ventilation, and burners.

Condition: used, SNOL Type: SNOL 120/350 SNOL heating and drying cabinet up to 350°C Description: SNOL high-temperature drying cabinet 120/350 For industrial applications. Max. 350°C Gujdpfxoziiuto An Esi Internal volume: 120 liters Internal dimensions: 555x350x555 mm 400 volts, 50 Hz, 6 kW Vertical air circulation via built-in fan, over-temperature protection Chamber made of stainless steel Door hinge on the right, includes two shelves Low power consumption Fast heating and cooling times Powder-coated housing RAL 7035 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: good (used), Year of construction: 1994, Heating system for hot water or steam Heating capacity: 6 MW Fuel: wood chips With oil burner as backup heating Guodpoyizqnofx An Eji Dismantling must be carried out by the buyer

Condition: good (used), Year of construction: 2019, heating cooling device GWK teco tt 50.08 WT2 300°C oil 8 kW year: 2019 price: 4.200 € contact: Mr. Rainer Eckerle Godpfx Ano Aba Eqj Esui

Condition: used, smoke pipe connection diameter: 200 mm, nominal heat output: 55 kW (74.78 HP), Offering a used HDG heating boiler with a heating capacity of 55 kW for collection. The boiler was manufactured in 1995 and is in excellent working condition. Gusdjzxf Hwopfx An Esi It can accommodate logs up to half a meter in length.