Used Heating Plate Press for sale (45,211)

Condition: excellent (used), Year of construction: 2016, operating hours: 27 h, SBL 1060 SE Year: 2016 Sheet feeder: Manual non-stop pile feeder Material range: Paper and board from 470 × 350 mm to 1060 × 760 mm Max cutting format: 1050 × 740 mm Min sheet size: 470 × 350 mm Max sheet size: 1060 × 760 mm Max cutting pressure: 300 tons Material thickness: 0.1 – 2 mm (corrugated/laminated max 4 mm) Min gripper margin: 9.5 mm Max inside chase size: 1155 × 852 mm Cutting plate size: 1076 × 756 mm Max speed: 8,000 sheets/hour Power consumption: Total 32 kW (22 kW + 10 kW for lower plate heating) Machine dimensions (L×W×H): 5,900 × 5,700 × 2,615 mm Max pile height – feeder (with pallet): 1,750 mm Max pile height – delivery (with pallet): 1,450 mm Feeder Section - Pneumatic feeder table - Non-stop manual feeder system - Anti-static system - Pre-pile device - Manual suction group adjustment - Micrometric suction adjustment - Motorized side pile adjustment - Suction belt feeder table - High-pressure lubrication pump - 2 pneumatic side register guides - Electronic control of front and side register Cutting/Embossing Section - Automatic pressure adjustment up to 300 tons - Preparation and introduction table for die frames in platen - 2 quick-lock die chase frames with bottom plate - Pneumatic locking of the chase and lower supporting plate - Centerline System - Micrometric system - Heated lower support plate (24 mm) - Cutting plate: 4 mm - Compensation plate: 3 mm - Archiveable 1 mm thin cutting plate Stripping Section Kfedpfx Agswypp Iszea - Quick lock for upper and central stripper frames - 2 standard upper stripper frames - 2 standard lower stripper frames - Double accessory kit for lower stripper prep (pins, bars, clamps, etc.) Delivery Section - High-pile automatic non-stop delivery with conveyor - Guillotine for automatic removal of gripper margin waste - Sheet deceleration device - Tab insertion device

Condition: ready for operation (used), Heavy hydraulic press Kfedpju R U Szefx Agzja

Condition: new, Year of construction: 2024, Hydraulic H Frame Press with movable Plate Capacity: 400 Ton Controll : by 2 Hand Bottom Main Cylinder : Ø 430mm. Auxilitary Cylinder : 2 pcs. Ø 110 x 55mm. Main Motor : 37kw. - 75hp. ( IE-3 ) Pumpe : 140cc. - 204LT BOSCH/REXROTH Speed: Down-140mm/sec. Working Speed13 - 5mm/sec Upspeed:150mm/sec Kfodpfspl Ugzjx Agzja Daylight : 1000mm Stroke: 700mm Movable Plate: 1500x1000mm Upper Plate : 1500x1000 Hydraulic: All the Hydraulic System will be top of the Machine Hydraulic System : BOSCH/REXROH Pressure & Speed Adjustment Side Cover doors Hydraulic Top Plate Lock system Mechanic Top Plate Lock System Automatic Lubrication System Oli Capacity : 1100 Lt Controller: Controller: SIEMENS S/7-1200 Electric Cabinet ( CE) Portable Control Panel Remote Connection System Security PLC Soft Starter Light Curtains on Front & Back Side Movable 2 Hand Control PLC Touch Screen: SIEMENS 12'' Working Area Ilimination 8 pcs free IN & OUT put-on PLC Movable Table: Stroke of the Movable Plate:1200mm Hydraulic Movement with external Motor and Pump Support Sliding System Table Paralelity: 0,05mm/ per m² All the Capacity,Dimentions and Options can be offered according to Customer Requirements Pls Contact us more Informations.

Condition: good (used), Laenge: About 2430 mm Ksdpfxod Nmdfs Agzefa Width: About 1520 mm Heithrange: About 540 mm

Condition: used, Working width 3450 mm Working height 2000 mm Number of cylinders 5 St. loading dimensions L x W x H 3600 x 1200 x 2720 mm Hess "Multipress" Perforated Plate Press For all sloped, segmental, and round-arch windows and doors. Also for interior work or frame construction. For gluing staircase block joints and much more. Largest working area approx. 3450 x 2000 mm External dimensions approx. 3600 x 1200 x 2720 mm The vertical perforated plate press is constructed of heavy-duty, torsion-free steel. Thanks to its simple, robust, and economical design, it has a long service life. The perforated plate is made of 10 mm sheet steel with a 50 mm hole pattern. The pressure cylinders and abutments are self-locking. 5 plug-in hand hydraulic cylinders on a perforated plate with a built-in pump, 2000 kp pressure relief valve, 140 mm pressure plate width, 80 mm pressure plate depth, 60 mm cylinder stroke 4 fixed individual abutments Kfsdpfx Aswqr R Asgzja (Technical specifications according to the manufacturer - no guarantee!)

Condition: excellent (used), Year of construction: 2003, Perforated Plate Press Schafberger + Sprödhuber (S+S Maschinenbau) Type LPP - SPECIAL FORMAT Universal Gluing Stand / Frame Press Pressing area approx. L x W 3800 x 3000 mm Installation depth approx. 1300 mm 6 hand hydraulic cylinders with integrated pressure relief valve, 60 mm stroke, max. pressing force 2,000 kg, pressure force finely adjustable with hand lever, cylinder can be swiveled 360° Including access ladder - on casters, pull-over NEW MAGNETIC LOCKS Ideal press for joinery shops that produce frames, solid wood panels, or windows in special shapes. Equipped with various pressing elements, see photos. Note: Used Machines: • Errors in technical specifications and subject to prior sale. Kfedetgq Ibspfx Agzja • Prices quoted are for pickup from location - free shipping! Prices quoted are for pickup from location - free shipping! • The machines have been cleaned and functionally tested. • All machines are sold as is, without any warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only respond to inquiries if you provide your address and telephone number!)

Year of construction: 2020, condition: new, Title Strassburger Filter SF400oDEC/30S Integra – Stainless Steel Plate and Frame Filter Press – Year 2020 – NEW / Unused Short Description For sale: unused, factory-sealed plate and frame filter presses from the renowned German manufacturer Strassburger Filter GmbH + Co. KG. The units are in brand-new condition, have never been commissioned, and remain in their original packaging from the factory. Manufacturer Strassburger Filter GmbH + Co. KG (Germany) Model / Type SF400oDEC/30S, Integra format Machine designation: FI6722 – FP PRE 1 Year of Manufacture 2020 Serial Number Among others: 032003303920 (additional serial numbers available) CE Marking Yes Condition Brand new / unused Factory-sealed Never installed, never used for production Stored in warehouse Quantity Available 4 identical units available New Price Original price €94,000 per unit (Total value for 4 machines: €376,000) Design / Material All stainless steel Plate and frame filter press Gasketed plates Pharma / biotech specification Hydraulic closure incl. hydraulic unit CE-compliant Technical Data Plate format: 425 × 400 mm Number of filter chambers: 28 Total filter area: approx. 3.4 m² Total volume: approx. 13.6 liters (100%) Max. operating pressure: 6 bar Max. operating temperature: 95 °C CIP / SIP capable (cleaning up to 121 °C) Dimensions & Weight Kfodpfsx Ihufex Agzea Length: approx. 1,649 mm Width: approx. 600 mm Height: approx. 1,145 mm Weight (filter frame): approx. 480 kg Weight (plate pack): approx. 120 kg Plate Pack 14 filter plates 13 filter frames 1 end frame 1 partition plate 28 filter layers per setup Hydraulics & Drive Hydraulic closure Hydraulic power unit included Motor power: 1.5 kW Electrical connection: 400 V / 50 Hz Solenoid voltage: 24 V DC Compressed air requirement: 3.0 bar Connections Product inlets and outlets: DN25 Vent / drain: DN15 Connections according to DIN 11864-2 Drip tray included Areas of Application Pharmaceutical production Biotechnology Chemical industry Pre-filtration Precipitation and clarification processes Location Germany Inspection by appointment Immediately available

Year of construction: 2025, condition: as good as new (ex-display), Vacuum - membrane press VP - series are the ideal solution for the wood processing industry. VP 3000 is equipped with heating technology, which reduces the drying time of the adhesive so that the performance is higher. Usage possibilities: Veneers / form gluing / wrapping... Coating of different profiles (veneer, paper, plastic...) Wood bending: Production of bent and glued components The heating system is equipped with temperature control Rubber membrane 2.5 mm Table top is made of plastic 12 mm Oil-free Becker vacuum pump 25 m3/h The control system of vacuum / Tankinhalr 15 l Work surface: 3000x1500mm Heating system temperature: Max 60 degrees C Heating system: KW 4,5 Kedpfedvltyox Agzsfa Pump output: KW 0.75 Vacuum pump capacity: 25 m3/h Rubber membrane Dimensions exterior: 3100 x 1650 x 1600 mm Weight: 450 kg Location: Off the shelf 54634 Bitburg -free load-

Condition: used, Further plates in stock, here number 1: Width x Depth x Thickness = 770 x 580 x 90 mm Hole = 131 mm and 200 x 300 mm Kodpfoxx U S Nox Agzofa and number 2: Width x Depth x Thickness = 800 x 600 x 60 mm Hole = 150 mm and number 3: Width x Depth x Thickness = 650 x 500 x 60 mm Hole = 120 mm and number 4: Width x Depth x Thickness = 550 x 440 x 80 mm Hole = 195 x 150 mm and number 5: Width x Depth x Thickness = 315 x 320 x 40 mm Hole = 95 mm

Year of construction: 1996, condition: excellent (used), machine/vehicle number: 121, Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST Kfedpfx Agsh Eib Ejzoa

Year of construction: 2021, condition: new, Here are the technical data of the offered machine: If the press does not exactly meet your requirement profile, please click to request an individual offer exactly according to your needs: Kjdpfx Agjgrkigszefa Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Technical data + information: hydraulic 50 T heating press for laboratories It is a lower piston press with an open height of 400 mm ram travel 300 mm heating platen capacity up to 250 degrees heating plate size 200x200mm weight about 1500 kg height 1950 mm hydraulics built in the press body Hydraulic tank with 100 l monitored vertical door for the press chamber pressure, position - and speed adjustable via SIEMENS S 7 1200 SIEMENS touch screen monitor with 9 inch Safety technology from SICK (C-press, hydraulic press, hydraulic press, laboratory press, laboratory) Are you looking for a custom-fit machine? Contact us for an individual offer. Our hydraulic presses are manufactured according to German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore our presses exceed the Canadian and European safety requirements, because they correspond in all points to the national Brazilian safety guideline NR 12, which is based on these. Our great strength is the special machine construction and the press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: excellent (used), functionality: fully functional, Granite Plate - Dimensions 1400x250x160mm - Quality appx. Class 0 or better (will be checked) Kodjtnkdcspfx Agzjfa - frame on demand - with mounted pneumatic press

Condition: used, Year of construction: 2002, machine/vehicle number: 98, Heizplatte / Heating Plate Busse HPT 900W Serial-No. 98 822 Heiztemperatur einstellbar / Heating temperature adjustable Arbeitsfläche / Working area max. 350 x 650mm 5 Trockenklammern / 5 Drying clamps Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Kjdpoupy S Nsfx Agzefa

Year of construction: 2025, condition: as good as new (ex-display), Vacuum - membrane press VP - Series are the optimal solution for woodworking. VP 3000 is equipped with the heating technology, which shortens the drying time of the glue, so that the efficiency is higher. Possible applications: Veneer / form gluing / wrapping... Coating of different profiles (veneer,paper, plastic...) Wood bending: production of bent and layer-glued components The heating system is equipped with temperature control Rubber membrane 2,5 mm Table top is made of plastic 12 mm Oil-free Becker vacuum pump 25 m3/h The control system of the vacuum / tank capacity 15 l working area: 3000x1500mm Heating system temperature: Max. 60 degrees C heating system: KW 4,5 Ksdodwh E Ajpfx Agzofa Pump capacity: KW 0,75 Vacuum pump flow rate: 25 m3/h Rubber membrane Dimensions outside: 3100 x 1650 x 1600 mm Weight: 450 kg Machine is equipped with a chassis. Location: From warehouse 54634 Bitburg - free on truck -

Condition: excellent (used), Year of construction: 2006, machine/vehicle number: 6513/19, Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST Kfjdpfewu Sg Eex Agzoa

Condition: good (used), pressing force: 95 t, cylinder diameter: 90 mm, plate width: 1,350 mm, Veneer Press Joos Type: HP 90 with 2 intermediate plates, stacking automaton, and lift table Pressing area: 2,550 x 1,350 mm Intermediate plates: 2 pcs. Pressing pressure: 95 t Piston diameter: 90 mm Specific pressing pressure: 2.75 kg/cm³ Kfjdpjxnqq Hofx Agzja Number of cylinders: 4 Heating medium: hot water Total power: 1.3 kW Safety device: emergency stop rope Press dimensions: 3,000 x 1,530 x 2,200 mm Press weight: approx. 4 t Elkom heating plates in very good condition Scissor lift table The plates are stacked and thus unloaded automatically.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: CU 600.6, The expansion vessel is in very good condition. Sale only due to the refurbishment of our heating system! Kodpfx Agewv T Nwjzofa

Condition: good (used), Pressure regulator intermediate plate Kfsdpfxjb A Ixnj Agzsa -Type: LR-ZP-A/B-D2 35428 -From: 0 bar to: 12 bar -Price: per piece -Quantity: 8x Available -Weight: 2 kg

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER VA (CAUHE) – 1860x1440 Machine with low usage, in very good condition Equipment: – Pneumatic clutch and brake – Control console – 3 operating modes: single, continuous, time-delay on opening – Centralized lubrication – Additional safety guards – Working tools – Hardened pressure plate Kfedpfex I Acqox Agzja

Condition: used, Engraving press, working frame internal dimensions: 26 x 36 cm, working size: 28 x 38 cm, 4 rollers, ink tray. Machine is in good condition and available immediately. If interested, we are happy to inform you about additional machines in our inventory. Kfodpsxy Ilrsfx Agzja You are warmly welcome to inspect the machine at our facility by prior appointment.

Condition: used, Year of construction: 1933, functionality: fully functional, overall weight: 5,000 kg, total length: 4,000 mm, total height: 2,000 mm, total width: 2,000 mm, Lithographic press 55 x 75 cm. The machine is in very good mechanical condition, but will definitely require new rollers for printing. All spindles are present and some are still usable. Ideal machine for art studios or lithography workshops to produce high-quality lithographs. Very rare machine. Kfjdpex D Tnaofx Agzea

Condition: used, Size: 3,000 mm x 1,200 mm -no attacks Kfjdpfxod Hwwuo Agzea -without pressing cylinders

Condition: used, 2 clamping plates, 1 pair of clamping bars with T-slots Clamping block, press table, auxiliary table with T-slots Length of each clamping bar: 900 mm Width of each clamping bar: 295 mm Thickness of each clamping bar: 130 mm - 6x T-slots, 30 mm - T-slot spacing: 150 mm - 6 holes Ø 18 mm (spacing 300 x 160 mm) - All faces machined Net weight per clamping bar: 240 kg Good condition Kjdexf Uwljpfx Agzsfa

Condition: good (used), Pressure regulator intermediate plate Kodpect Nvisfx Agzsfa -Manufacturer: Festo -Type: LR-ZP-AD-2 -From: 0 bar to: 12 bar -Number: 1x valve available -Price: per piece -Dimensions: 250/60/H55 mm -Weight: 1 kg

Condition: ready for operation (used), Year of construction: 1967, functionality: fully functional, machine/vehicle number: No.1469/77, mold height (min.): 2,356 mm, Gietz – Proofing Press / Luxury Model Manufactured in the 1960s in Switzerland, print format 52 x 68 cm A beautiful, compact, and solid example. Technically impeccable and fully operational – the ideal printing press for museums, schools, workshops, and dedicated hobby artists seeking an authentic, durable piece of equipment. Previously located in the atelier of the Gutenberg Museum in Fribourg, Switzerland. This machine is highly versatile and can be used for letterpress printing with lead or wooden type, woodcuts, linocuts, blind embossing, die-cutting, and much more. Kedpjx A Eaxofx Agzofa