Used Heat Press for sale (26,787)

Condition: used, With this offer, you are purchasing a used manual transfer press ‘Lotus LTS 150 B from 2023’. Item for sale: 1 x Lotus LTS 150 B with the following equipment: Includes DTF gel oven Year of manufacture: 2023 Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Hsdpfx Abex Eg Upjvsnn Seaworthy packaging and worldwide shipping available on request! For more information, please feel free to contact us personally.

Year of construction: 2026, condition: as good as new (ex-display), Vacuum - membrane press VP - series are the ideal solution for the wood processing industry. VP 3000 is equipped with heating technology, which reduces the drying time of the adhesive so that the performance is higher. Usage possibilities: Hsdpfxjdvltys Abvjnn Veneers / form gluing / wrapping... Coating of different profiles (veneer, paper, plastic...) Wood bending: Production of bent and glued components The heating system is equipped with temperature control Rubber membrane 2.5 mm Table top is made of plastic 12 mm Oil-free Becker vacuum pump 25 m3/h The control system of vacuum / Tankinhalr 15 l Work surface: 3000x1500mm Heating system temperature: Max 60 degrees C Heating system: KW 4,5 Pump output: KW 0.75 Vacuum pump capacity: 25 m3/h Rubber membrane Dimensions exterior: 3100 x 1650 x 1600 mm Weight: 450 kg Location: Off the shelf 54634 Bitburg -free load-

Year of construction: 2026, condition: as good as new (ex-display), Vacuum - membrane press VP - Series are the optimal solution for woodworking. VP 3000 is equipped with the heating technology, which shortens the drying time of the glue, so that the efficiency is higher. Possible applications: Veneer / form gluing / wrapping... Coating of different profiles (veneer,paper, plastic...) Wood bending: production of bent and layer-glued components The heating system is equipped with temperature control Rubber membrane 2,5 mm Table top is made of plastic 12 mm Oil-free Becker vacuum pump 25 m3/h The control system of the vacuum / tank capacity 15 l working area: 3000x1500mm Heating system temperature: Max. 60 degrees C heating system: KW 4,5 Pump capacity: KW 0,75 Vacuum pump flow rate: 25 m3/h Rubber membrane Dimensions outside: 3100 x 1650 x 1600 mm Hnedpfxodwh E As Abvjn Weight: 450 kg Machine is equipped with a chassis. Location: From warehouse 54634 Bitburg - free on truck -

Condition: used, This listing is for a second-hand DTG/DTF printer, the ‘Brother GTX 423Pro’ Items included: 1 x Brother GTX 423Pro with the following accessories: Includes Lotus Heat Press LTS 150B Slide Includes Schulze PreTreat maker 5 Meter readings: Total: Approx. 5,500 prints Condition: Hnedpfx Aoy R Nmhebvsn This listing is for a second-hand device, which may show signs of use (minor scratches or discolouration). The device has been tested for functionality A test print can be seen in the photo Packaging and shipping: You are welcome to view the device during our business hours. Please arrange an appointment for this! Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: as good as new (ex-display), Year of construction: 2023, pressing force: 120 t, table length: 600 mm, table width: 600 mm, Here are the technical data of the offered machine: Technical data + information: HB 2021-A-188, oil hydraulic double column press 120 T bottom piston heating press. - idle speed up to 40 mm/sec - Opening speed up to 40 mm/sec - Starting press speed 5-15 mm/sec - Table size/heating plate size 600 × 600 mm - ram size/heating plate size 600 × 600 mm - 2 heating plates, electrically heated, up to 250 degrees - as OPTION - total size approx. 2000 × 1000 × 2800 mm height - Oil temperature control - Automatic lubrication - Free positioning of the ram - SICK/LEUTZE light barriers 14,1 mm on front side - Circuit oil cooling - Pressure holding valve 0 to 1800 sec. - Rear monitored door - Pressure adjustment from 30 T to 120 T - Travel limitation either by pressure or position - Programming set-up mode, single stroke (adjustable via rotary switch) - Control panel permanently installed in cabinet wall - Two-hand operation - Machine body double painted - Signal light: red: alarm, yellow baking phase, green: ready - Heating plates with electric heating rods, up to max. 250 degrees - Assembly, commissioning, instruction against separate charge Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 1,600 kN Free ripping force max. 200 kN Pressure build-up time closed die steel to steel Max. 8 sec. Dimensions Max. Opening width per compartment 200 mm Stroke and min. opening per compartment 400/200 mm Table height above floor, without heating pl. 850 mm Height above floor (overall height) approx. 2.800 mm Hall height min. 3,500 mm Parallel deviation at 20 °C +/- 0.1 mm Deflection Determined at max. clamping force with 70 % occupancy ≤ 0.2 mm/m Total weight of the press without operating materials approx. 9 to Accessories: 4 HEATING PLATES 500 × 400 mm, max. heating capacity Equipped with temperature sensor 300 degrees Speeds Fast closing with 15 mm sec. Pressing speed 10 mm sec. Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3 max. 8 db(A) Number of pressing cylinders 1 pc. Operating pressure max. 240 bar Pressing pressure build-up time 4 sec. Hedpfx Aok S Dt Tsbvsnn Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH gear pump approx. 48 L/min Oil volume approx. HLP 46 MW 300 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Automatic pressure readjustment after 5 % pressure loss Pressure stabilization for up to 1800 sec. Electrical system Main supply 400 V AC Control voltage Hydraulic pumps 24 V DC 24 V DC Frequency 50 Hz Connection hydraulic main motor 15 kW Total connection approx. without heating plates 19 kW ##### If the press does not exactly meet your requirements, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Our great strength is special machine construction and press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Year of construction: 2021, condition: new, pressing force: 50 t, Here are the technical data of the offered machine: If the press does not exactly meet your requirement profile, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Technical data + information: hydraulic 50 T heating press for laboratories It is a lower piston press with an open height of 400 mm ram travel 300 mm heating platen capacity up to 250 degrees heating plate size 200x200mm weight about 1500 kg height 1950 mm hydraulics built in the press body Hydraulic tank with 100 l monitored vertical door for the press chamber pressure, position - and speed adjustable via SIEMENS S 7 1200 SIEMENS touch screen monitor with 9 inch Safety technology from SICK Hjdpfogrkigjx Abvenn (C-press, hydraulic press, hydraulic press, laboratory press, laboratory) Are you looking for a custom-fit machine? Contact us for an individual offer. Our hydraulic presses are manufactured according to German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore our presses exceed the Canadian and European safety requirements, because they correspond in all points to the national Brazilian safety guideline NR 12, which is based on these. Our great strength is the special machine construction and the press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, pressing force: 300 t, table length: 1,800 mm, table width: 1,100 mm, Vulcanizing Press – Manufacturer: Durendus – 300 t Heating Press – Table 1,800 × 1,100 mm For sale is a high-performance hydraulic vulcanizing press from the manufacturer Durendus with a press force of 300 t. The machine features large-format heating plates measuring 1,800 × 1,100 mm, a clear column spacing of 2,100 mm, and a stroke of 600 mm, making it particularly suitable for large-surface vulcanizing, laminating, and thermal pressing processes in industrial applications. ==== Technical Data & Information: Vulcanizing Press Durendus – 300 t Heating Press ==== General Details - Manufacturer: Durendus - Model: Vulcanizing Press - Design: Heating Press / Vulcanizing Press - Press force: 300 t - Machine weight: approx. 22,000 kg - Dimensions (W × D × H): approx. 3,800 × 1,870 × 3,600 mm ==== Working Area - Clear width between columns: 2,100 mm - Max. distance between heating plates: 800 mm - Stroke: 600 mm - Table height over floor (incl. heating plates): 800 mm ==== Table and Ram - Heating plate size: 1,800 × 1,100 mm - Table (lower), with T-slots: 2,100 × 1,100 mm - Ram with T-slots: 1,900 × 1,100 mm ==== Speeds - Approach speed: 150 mm/s - Working speed: 15 mm/s - Return speed: 150 mm/s ==== Hydraulics (Version 1) - Hydraulic unit: Bosch Rexroth - Hydraulic pump: 105 l/min - Motor power: 22 kW ==== Hydraulics (Version 2) - Hydraulic unit: Duplomatic / Daikin Hybrid-Servo - Hydraulic pump: 130 l/min - Motor power: 15 kW ==== Control and Operation Hnodpsx Ap Itjfx Abvsn - Two-hand operation - Ram return via control button - Travel limit via Leuze measuring system and monitor ==== Features - CE certificate - User manual included ===== Vulcanization, rubber processing, plastics processing, lamination processes, large-format molding presses, thermal pressing procedures, heavy-duty applications Vulcanizing press, heating press, hydraulic press, large-format press, laminating press, molding press, thermal press, heavy-duty press, try-out press, tool tryout press Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with Brazilian national safety standard NR 12, which is based on these directives. Our core strengths are special machine construction and press automation. We supply custom hydraulic presses at surprisingly competitive prices. We use components from leading European manufacturers for the hydraulic systems in our presses.

Condition: like new (used), Year of construction: 2023, total height: 2,500 mm, table height: 900 mm, pressing speed: 8 mm/s, pressing force: 50 t, overall weight: 2,900 kg, operating pressure: 250 bar, ram plate width: 498 mm, table length: 522 mm, table width: 522 mm, type of input current: AC, power: 10 kW (13.60 HP), input voltage: 400 V, distance table to ram: 600 mm, oil tank capacity: 130 l, operating speed: 8 mm/s, Equipment: safety light barrier, Vulcanizing Press – Manufacturer Hidrobrasil – 50 t Double Column Heated Press For sale is a hydraulic vulcanizing press from the manufacturer Hidrobrasil with a pressing force of 50 t, featuring a robust double-column design. The machine is equipped with electrically heated platens (approx. 522 × 522 mm), a maximum daylight opening of 600 mm, as well as precisely adjustable pressing and heating parameters. It is particularly suitable for industrial vulcanizing, laminating, and thermal pressing processes in continuous operation. ===== Technical Data + Information: Vulcanizing Press Hidrobrasil – 50 t Heated Press ==== General Specifications - Manufacturer: Hidrobrasil - Model: Vulcanizing Press - Design: Double Column Heated Press - Pressing Force: 50 t (500 kN) - Machine Weight: approx. 2.9 t - Overall Height: approx. 2,500 mm - Minimum Hall Height: 3,500 mm ==== Working Area - Max. Opening: 600 mm - Stroke / Min. Opening: 300 / 300 mm - Table Height above Floor (with heating platens): 900 mm ==== Table and Ram - Table Size / Platens: approx. 522 × 522 mm - Ram Size / Platens: approx. 498 × 498 mm - Number of Heating Levels: 1 ==== Forces - Free Stripping Force: 20 kN - Pressure Range: 8 – 50 t ==== Speeds - Idle Speed: up to 10 mm/s - Opening Speed: up to 40 mm/s - Pressing Speed: max. 8 mm/s ==== Hydraulics - Operating Pressure: max. 250 bar - Pressure Build-Up Time: max. 3 sec. - Pressure Accuracy: ± 5 bar - Main Pump: Bosch Rexroth Gear Pump approx. 26 l/min - Oil Volume: approx. 130 l (HLP 46) - Automatic Pressure Adjustment - Pressure Hold Time up to 3,600 sec. - Circulating Oil Cooling - Oil Temperature Monitoring ==== Heating System - 2 electrically heated platens - Temperature Range up to 200 °C - Thermally Neutral: 80 – 120 °C - Integrated Temperature Sensor - Insulated Platens Hodpjtwv S Nefx Abvenn ==== Control and Operation - Two-Hand Operation (adjustable or fixed) - Travel Limitation by Pressure or Position - Pressure Adjustment via Rotary Control - Signal Tower (Red / Yellow / Green) - Operation via Control Cabinet ==== Electrical - Main Supply: 400 V AC - Control Voltage: 24 V DC - Frequency: 50 Hz - Hydraulic Motor Rating: 7.5 kW - Total Connected Load: approx. 10 kW (without heating platens) ==== Miscellaneous - Sound Pressure Level: max. 78 dB(A) - Parallelism Deviation: ± 0.1 mm - Deflection: < 0.2 mm/m ===== Vulcanization, rubber processing, plastics processing, laminating processes, compression molding, thermal pressing methods, hot pressing, continuous operation Vulcanizing press, heated press, hydraulic press, rubber press, laminating press, forming press, thermo press, double column press, tryout press, tool try-out press Are you looking for a hydraulic press tailored to your application? Contact us for a customized offer.

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, machine/vehicle number: W202001, table length: 800 mm, table width: 550 mm, Equipment: documentation/manual, H-Frame Press – 30 t – Double-column Press – 800 × 550 mm – Versatile Assembly & Production Press For sale: hydraulic double-column press (H-frame press) with a pressing force of 30 t. The machine is highly versatile and can be used as an assembly press, small batch press, hand-loading press, vulcanizing press, or heated platen press. This is an approximately 2.5-year-old, unused machine with zero operating hours, offered with full warranty. Inspection is possible at our warehouse in Ennepetal. ===== Technical Specifications & Information: Hydraulic Double-Column Press – 30 t ==== General Information - Design: Double-column press (H-frame) - Pressing force: 5–30 t (adjustable) - Machine weight: approx. 2,000 kg - Paint finish: RAL 7035 (Light Grey) / RAL 2009 (Orange) ==== Working Area - Table size: 800 × 550 mm (additional variant: 700 × 500 × 70 mm) - Ram plate: 700 × 500 × 80 mm - Max. distance table/ram: 500 mm - Stroke: 500 mm - Front opening width: 820 mm - Table height: 800 mm ==== Speeds - Approach speed: approx. 45–50 mm/sec - Return speed: approx. 40–55 mm/sec ==== Hydraulics - Operating pressure: up to 300 bar - Hydraulic pump: ASC, 28.5 l/min - Motor power: 11 kW - Oil tank: approx. 100 l - Valves: Bosch Rexroth ==== Construction & Guidance - Cylinder: Ø 110 mm (piston), Ø 70–75 mm internal - Guide columns: Ø 50 mm - Ram guided by 2 columns - Robust machine frame - Rear and side guards fully enclosed ==== Control & Operation - Pressing pressure adjustable via rotary control - Adjustable two-hand operation (3 m supply cable) - Position limitation via cam switch - Travel limitation via movable sensors - Automatic positioning to defined stroke points - Resettable piece counter ==== Safety - Light curtain 500 mm (14 mm resolution, finger protection) - Reach-under protection - Optional reach-over protection - Emergency stop switch - Certified safety inspection ==== Equipment - Control cabinet technology from brand manufacturers - Illumination in press workspace - Eject chute in table Hsdpfx Aju U Ey Iobvjnn ==== Options - Heated platens: 500 × 500 mm (up to 200 °C, with controller & timer) - Commissioning & operator training ==== Lead Time & Service - Delivery time: approx. 6 weeks (without heated platens) - Heated platens: approx. 8 weeks - Customer service: Dresden, Hamburg, Ennepetal, Waibstadt, Göppingen, Gelsenkirchen ===== Assembly work, small batch production, forming applications, vulcanizing, hot pressing Hydraulic press, hydraulic press, double-column press, H-frame press, assembly press, small batch press, vulcanizing press, heated platen press, industrial press Are you looking for a hydraulic press customized for your application? Contact us for a tailored offer. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC regulations, and EU safety standards. Additionally, our presses exceed both Canadian and European safety requirements, as they fully comply with the Brazilian occupational safety standard NR 12, which builds upon these regulations. Our core strengths are special machine engineering and press automation. We offer custom-built hydraulic presses at surprisingly attractive prices. The hydraulic systems primarily use components from leading European manufacturers.

Condition: good (used), For sale is a hydraulic hot plate/molding press manufactured by Italpresse. Hsdjy Ufqqepfx Abvjnn Technical specifications: Manufacturer: Italpresse Type: GL 14-6/180 Machine designation: PRE46 Press force: 180 t Max. hydraulic pressure: 600 bar Cylinder stroke: 325 mm Opening: 325 mm CE marking present Control system with operating panel/CNC Condition: used, ready for operation Equipment: Enclosed safety cabin Hydraulic press system Hot plate press / molding press Industrial design Electronic control Condition: The machine comes from ongoing production and is in used, functional condition. Inspection possible by arrangement.

Condition: used, Year of construction: 2002, Italpresse BG/660 Molding press / Heated platen press – 660 t pressing force Manufacturer: Italpresse Model: BG/660 Year of manufacture: 2002 Condition: Used, operational Technical data * Pressing force: 660 t * Press platen size: 1,900 x 1,600 mm * Heating power: 31 kW * Connected power: 108 kW * Operating voltage: 400 V * Control voltage: 220 V * Frequency: 50 Hz * Phases: 3 + N + PE * Rated current: 160 A * Weight: approx. 28,000 kg * Design: Bottom platen heated platen press / Molding press Hedpfey Ufqdjx Abvonn Robust hydraulic molding press from Italpresse for the production of molded parts and glued wood components. The machine has heated press platens and a pressing force of 660 tons. Ideal for applications in the furniture, wood, and molding industries. The press is in used condition. Inspection possible by appointment. Documentation available.

Condition: not inspected (used), Year of construction: 2016, functionality: unexamined, input voltage: 230 V, input current: 15 A, input frequency: 50 Hz, Equipment: documentation/manual, Used Secabo TS7 Transfer Press Manufacturer: Secabo Model: TS7 Hnjdpfx Absy Nztdjven Voltage: 230-250V (50Hz) Includes manual and extra parts

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, Used upsetting press with inductive heating, for solid material diameter: 12 mm - 60 mm Manufacturer: GFU Model: HP 200 Year of manufacture: 2009 Serial no.: 09/1025 with extensive accessories Hodpfxsycl Ids Abvonn

Condition: used, Year of construction: 2022, functionality: fully functional, overall weight: 193 kg, SEFA Duplex Pro V3 – Pneumatic Double Platen Heat Press – 2022 Pneumatic double platen / double workstation heat press SEFA Duplex Pro V3, manufactured in 2022, in excellent condition. Machine tested and cleaned, ready for immediate use. - Delivery no included Ideal for any professional textile marking workshop requiring high throughput and reliable performance. TECHNICAL SPECIFICATIONS - Brand: SEFA - Model: Duplex Pro V3 - Year: 2022 - Type: Pneumatic double platen heat press with lateral swing - Platen size: 40 × 50 cm (16 × 20 in) - Maximum pressure: 625 g/cm² - Maximum temperature: 220 °C - Power: 2,200 W - Power supply: 240 V single-phase - Maximum substrate thickness: 45 mm - Weight: 170 kg - Dimensions: 713 × 891 × 1,079 mm - 3 pressing modes: single platen / semi-automatic / full automatic - Independent pressing time per platen - 10 storable time/temperature programmes Hsdpfoyvh Rcjx Abvjnn - Foot pedal control included as standard - Automatic head translation - ECO mode, standby mode, dual piece counter - Designed and manufactured in France APPLICATIONS Textile sublimation and rigid substrates, heat-seal flex and flock, screen-print transfer, laser transfer, DTF on garments and accessories, DTG pre-treatment drying. CONDITION Tested, cleaned, excellent overall condition. Available immediately. Sold by Manutech-Print, professional reseller of textile printing equipment. Contact: manutech-print.com

Condition: used, Thermopatch Type: NL-15-SQR/R The NL-15-SQR/R is a sophisticated combination of advanced technology and a modern, ergonomic design. The device heats up quickly and automatically switches to energy-saving mode when needed. The NL-15-SQR/R operates exclusively with compressed air and is the one-size-fits-all solution for every application. The display is user-friendly. Intended Use: This heat seal press is particularly suitable for industrial applications that require precise temperature control and the ability to use smaller sealing plates (140 x 140 mm). Hodpfx Aewif Rgebvenn Common applications include applying patches, transfers, or embroidery to textiles. Special Features: Robust and durable: The machine is designed for intensive use and is popular in the textile industry as well as other industries that require high-volume, medium- to high-temperature processing. High flexibility: The temperature range of 25 to 210°C and the adjustable timer from 1 to 240 seconds offer flexibility for a wide variety of materials and applications. Efficient: The air pressure range of 3 to 6 bar and the air consumption of 3.01 liters per cycle make the machine efficient in operation. The Thermopatch NL-15-SQR/R is an industrial heat seal press with the following technical specifications: Technical Data: Power supply: 240 V Maximum power: 800 W Temperature range: 25 – 210 °C Timer: 1 – 240 seconds Dimensions (H x W x D): 470 x 540 x 470 mm Sealing plate (mm): 140 x 140 mm Noise level: < 70 dB Air pressure range: 3 – 6 bar Air consumption per cycle at 5 bar: 3.01 l Weight: 59 kg Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: SINAC 25/40 SM Exp, total height: 1,500 mm, total width: 1,000 mm, total length: 2,500 mm, type of input current: three-phase, input voltage: 400 V, pressure: 6 bar, input current: 45 A, Induction heating station with 25 kW power for transporting and pressing bearings. Hnodpfxew Hwp Ns Abven

Condition: ready for operation (used), Year of construction: 1990, Miller-Johannisberg 660 Specification Detail Process Heatset web offset printing Web Width 660 mm Cut-off 452 mm Colors/Units Typically configured with 5 printing units (works 4+4) Dryer VITS gas dryer Folder Capable of folding up to A5 size Hedpeyk Eg Njfx Abvenn Controls Includes a control panel with register control Tension control system Baldwin dampening Chiller unit, plus chilling system before folder

Condition: new, Infrared Heated Press – LT Machines Infra Red Heated Press Brand new, unused!!! Hjdpfx Abjw A Rdrsvjnn Manufacturer: LT Machines Device type: Infrared heated press Model: Infra Red Heated Press Control: Control panel with 12 independent heating zones Heating system: Infrared Overall dimensions: Width: 4000 mm Depth: 2600 mm Height: 2000 mm

Condition: used, Year of construction: 2021, 2x Atlas Copco Heat Pump Compressor With Spares (Unused 2021) Atlas Copco heat pump compressor 1 with coupling Atlas Copco heat pump compressor 2 with coupling Oil system Hnjdpszb N Dyefx Abvsn Run down tank With spares as seen in asset list Download asset list below for more details Note: Sales are conditional upon the satisfactory completion within 24 hours of conditional sale of a Business Partner Due Diligence Check (BPDDC) and an End User Statement form (EUS) by the buyer, and, if the buyer is not the end user, for each end user. BPDD and EUS forms can be downloaded below.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 10001626, Equipment: documentation/manual, 2x Atlas Copco Heat Pump Compressor With Spares (Unused 2021) Hsdpfx Asy Tccbsbvonn Atlas Copco heat pump compressor 1 with coupling Atlas Copco heat pump compressor 2 with coupling Oil system Run down tank With spares as seen in asset list Note: Sales are conditional upon the satisfactory completion within 24 hours of conditional sale of a Business Partner Due Diligence Check (BPDDC) and an End User Statement form (EUS) by the buyer, and, if the buyer is not the end user, for each end user.

Condition: ready for operation (used), Compressor DWM DLJP-20x-EWL, Compressor DWM DLJP-20x-EWL, Piston Compressor, Cooling Compressor, Heating Compressor, Used machine Technical Specifications Hodpfx Aju T H Rljbvjnn Brand: DWM COPELAND Model: DLJP-20X-EWL Refrigerant: Freon Weight: 82 kg Year of manufacture: 1999 Performance at different temperatures: -20ºC/+40ºC: 4.98 kW -30ºC/+40ºC: 2.75 kW Maximum pressure values: 28/22.5 bar Delivery capacity: 14.50 m³/h Dimensions: Length: 460 mm Width: 330 mm Height: 550 mm Electrical Data: 400V; 5.6A; 1450 RPM

Condition: good (used), Used electrically heated pressure vessel with agitator Item number: 10256 Last use: Chemistry Volume: 280L Type: Upright on feet Material (wetted parts): 1.4301 stainless steel Bottom: dished bottom Top: dished bottom with flange ring Operating pressure according to type plate: +3Bar Operating temperature: Max. 90°C Tank dimensions: Inner diameter: 560mm Outer diameter: 580mm Hsdpfjd Dwi Hex Abvsnn Height of the feet: 260mm Distance from drain to floor: 365mm Total height: 1540mm Materials: Interior: 1.4301 / AISI304 External parts: 1.4301 / AISI304 Equipment: Double jacket around cylinder and bottom electrically heated Agitator in upper base, speed adjustable Top floor completely removable Various connections Sight glass in cylinder

Condition: good (used), Used pressure vessel / Electrically heated SKU: 10407 Last use: Cosmetics Volume: 695 litres Type: Standing on 3 feet Material (media contact): 1.4404 stainless steel Design: Single-walled / Insulated / Electric Heating Manhole: 345mm Bottom: Curved Upper floor: Curved Operating pressure according to type plate: - 1 / +3 bar Test pressure according to type plate: 8 bar Maximum operating temperature: +152°C Dimensions of containers: Outer diameter: 820mm Cylindrical height: 1220mm Height of feet: 750mm Distance outflow to ground: 800mm Total height: 2040mm Total width: 1000mm Materials: Inside: 1.4404 / AISI316L Exterior parts: 1.4301 / AISI304 Hnjdpsd R Hgksfx Abvon Facilities: Nameplate: yes Outlet: DN 65 Various connections Isolated Electrically heated Actuator

Condition: reconditioned (used), functionality: fully functional, operating pressure: 150 bar, high-pressure hose length: 10,000 mm, input voltage: 400 V, fuel: electricity, overall weight: 135 kg, warranty duration: 6 months, temperature: 80 °C, HOT WATER PRESSURE WASHER NILFISK 5M-150/750 NEW ELECTRIC HEATER (2x) The device has new equipment, including a German brand R+M gun, stainless steel lance, steel braided hose and 25° power nozzle A durable brass head with new ceramic pistons and seals guarantee long and trouble-free operation A very efficient three-phase motor ensures stable operation even with long-term use Thanks to the operating parameters of 150bar and 750l/h, the machine can be effectively used for heavy work in construction, logistics and agriculture Fully electric water heating allows work in places where exhaust gas production is not allowed. Each device we offer has individually taken photos, you buy exactly the machine you see TECHNICAL DATA: Power supply voltage [V]: 400 ~3 phases Pressing capacity [l/h]: 750 Hnodpfx Abjv Src Nsvon Working pressure [bar]: 150 Max. heating temperature [°C]: 80 Heater power [kW]: 24 Cleaning agent tank [l]: 10 + 10 Hose length [m]: 10 Weight [kg]: 135 EQUIPMENT: NEW ELECTRIC HEATER (2x) NEW durable pressure gun by German brand R+M NEW pressure lance made of stainless steel NEW reinforced pressure hose in steel braid 10m NEW power nozzle 25° WATER FILTER AND GEKA claw connectors - FREE KEY FEATURES: Open oil system - no operating time limit Built-in chemical tank allows dosing of cleaning fluid directly through the machine Very legible and intuitive control panel Simple construction and good access to individual elements under the housing make the machine user-friendly and easy to service

Condition: used, Used agitated tank with insulation Previous application: Pharmaceuticals Item number: 10785 Hnodex Ewqdspfx Abven Volume: 300 liters Type: Standing on 4 castors Product-contact material: 1.4571 / AISI316 Design: with insulation Operating pressure (as per nameplate): +0.5 bar Max. operating temperature: +95°C Tank dimensions: Manway: 410 mm Internal diameter: 700 mm External diameter: 800 mm Foot height: 870 mm Total height: 1700 mm Total width: 870 mm Total length: 950 mm Cylindrical height: 650 mm Materials: Internal: 1.4571 / AISI316 External parts: 1.4301 / AISI304 Equipment: Nameplate: Yes Outlet diameter: DN25 Distance from outlet to floor: 365 mm Propeller agitator Empty weight: 184 kg