Used Spotting Press for sale (14,109)

Condition: ready for operation (used), Year of construction: 1964, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Press Clamping force: 68.6 kN Table Table dimensions: 600 × 600 mm Number of slots: 4 Electrical data Operating voltage: 380 V Connected load: 4 kW Power: 1 kW MACHINE DETAILS Manufacturer: Reis Type: 60A/7H Machine number: 48/64 Year of manufacture: 1964 Machine type: Embossing press Dimensions and weight Length: 1,500 mm Width: 1,300 mm Height: 3,000 mm Dwedpfxs Advcdj Ai Ejd Weight: 3,000 kg EQUIPMENT 4 slots in the table

Condition: used, Year of construction: 1980, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Performance data Pressure: 24 t Table Dsds Aa Nwmjpfx Ai Eowd Table length: 1,060 mm Table width: 650 mm Minimum opening: 165 Dimensions Space requirement: approx. 1,300 × 700 × 1,500 mm EQUIPMENT No information available regarding accessories.

Year of construction: 2019, condition: good (used), machine/vehicle number: DF0137, pressure:120 t table length:600 mm table width:600 mm stroke max.:400 mm dimensions:1070 x 2340 x 2800 mm weight:4,2 t pre-running speed:10 mm/sec :26 mm/sec :200 l Dodpjffamtofx Ai Eswd Oil cooling (electric):1,5 kW (max) table height:875 mm Working height from to:500 mm diameter of piston:230 mm total power requirement:15 kW pump capacity:24 Lt./sec Pressure power:300 bar :76 mm :650 mm capacity of ejector in table:20 t :150 mm Recommended oil:46er

Condition: good (used), Pinning and testing press Manufacturer: REIS Type: TUS 60 A Machine number: 791/74 Year of manufacture: 1974 Dwodpfx Aiszzl Tps Eed Pressing force: 10 t Retraction force: 2 t Maximum stroke: 500 mm Operating pressure: 175 bar Table clamping area: 590 x 670 mm Distance between columns: 600 / 600 mm Installation height: 720 mm Plate thickness: 60 mm Connected power: 5.5 kW Dimensions: 1,400 x 1,400 x 2,800 mm Weight: 2.3 t Equipment: Plate can be drawn out and swiveled Condition: good

Condition: used, Year of construction: 1988, pressure 200 t table length 2500 mm table width 1800 mm table travel 2700 mm dayligth 2250 mm upper clamping surface: 1800x2500 column base area 1900 mm total power requirement 22 KW weight of the machine ca. 30 t dimensions of the machine ca. . m Nominal force: 1000 kN Top plate pivots Table is movable The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Dwedpfx Aisyqvxio Eod About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1981, pressure 100 t table length 1250 mm table width 900 mm table travel 1200 mm dayligth 700 mm upper clamping surface: 1000x1200 weight of the machine ca. 12 t dimensions of the machine ca. . m Nominal force: 1000 kN Top plate pivots Table is movable The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Dwjdpfsyqvtmox Ai Ejd If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1992, pressure 100 t table length 1800 mm table width 1550 mm table travel 2000 mm dayligth 1800 mm Dwsdeyt R H Tspfx Ai Esd total power requirement 19,5 KVA weight of the machine ca. 22 t

Condition: good (used), Year of construction: 2005, 1 used transfer molding press Manufacturer: REIS Type: TUS 160 200 Year of manufacture: 2005 Serial No.: 031023 Control type: NC Control: Simatic Key technical data Technical feature | Value Manufacturer / Type | REIS Robotics / TUS 160-2000 Maximum pressing force | 2,000 kN Dwsdo Afahaspfx Ai Esd Maximum retraction force | 850 kN Platen size | 1,600 × 2,000 mm Installation height | 1,800 mm Maximum possible installation height in increments of 100 mm | 2,200 mm Plunger stroke without pivoting mechanism | 1,200 mm Plunger stroke with 95° pivoting mechanism | 1,200 mm Plunger stroke with 180° pivoting mechanism | 2,000 mm Maximum possible plunger stroke in increments of 100 mm | 2,400 mm Maximum mold weight | 20,000 kg Maximum load on the upper platen | 10,000 kg Maximum load on the tilting mechanism | 12,000 kg Tilting angle of the tilting mechanism | 60° Maximum platen parallelism | 0.2 mm per 1,000 mm Maximum horizontal positioning accuracy | Ø 0.04 mm Machine weight | 28 t Speeds and connection data Technical feature | Value Maximum closing speed | 48 mm/s Maximum opening speed | 45 mm/s Carriage speed | 200 mm/s Pivoting speed | 180 mm/s Tilting speed | 100 mm/s System pressure during closing, maximum | 200 bar System pressure during opening, maximum | 220 bar Tank capacity | 475 l Connection value without / with injection unit | 25 / 28 kVA Drive power | 18.5 kW Ejection and other equipment data Technical feature | Value Maximum table ejection force | 62 kN Table ejection stroke | 200 mm Table ejection travel | 150 mm Maximum plunger ejection force | 75 kN Plunger ejection stroke | 200 mm Injection unit volume | 10 l Injection pressure | 4–10 bar Rotary unit installation height | 1,600 mm Rotary unit maximum mold weight | 18,000 kg Rotary unit maximum load on tilting mechanism | 9,000 kg Technical data subject to change.

Condition: used, Year of construction: 1998, pressing force: 100 t, For sale is a used die-setting press from the manufacturer REIS with a maximum pressing force of 100 tons. The machine has a table size of 1,100 × 800 mm, a maximum installation height of 950 mm, and numerous features, including an ejector in the table, oil connection boxes for core pulls, and a 180° pivoting ram plate. It is therefore particularly suitable for die-setting operations, tool try-out, and testing in mold and tool making. ##### Technical Data + Information: Die-setting press – 100 tons – 1,100 × 800 mm ==== General Information - Design: 4-column die-setting press - Manufacturer: REIS - Type: TUS 80–100 - Year of construction: 1998 - Pressing force: 26–100 tons (adjustable) - Retraction force max.: 45 tons - Table size: 1,100 × 800 mm - Max. table load: 5,000 kg - Installation height max.: 950 mm - Overall dimensions (W x D x H): approx. 2,100 × 3,395 × 3,670 mm - Total weight: approx. 8,500 kg - T-slots: DIN 650 – 22 mm ==== Hydraulic Cylinder - Pressing force range: 26–100 tons - Retraction force: 45 tons ==== Hydraulics & Drive - Hydraulic pump: REXROTH SYDFE11x71RN0030CAM - Motor power: 7.5 kW - Working pressure max.: 200 bar - Pressure accuracy: ±5 bar - Tank volume: 200 l - Hydraulic oil: HLP 36 ==== Motion System - 180° pivoting ram plate - Load capacity of the pivoted ram plate: up to 3 tons - Ejector in the ram: 3.5 tons - Ejector stroke: 130 mm - Extendable table - Table can be tilted to both sides - Movable ejector in the table - Oil connection boxes for core pulls - Injection molding filling device in the ram - Quick clamping plate on the ram ==== Control - Operation via control panel - Press force setting - Operation of core pulls - Control: Siemens / Pilz - Digital measuring device ==== Safety - Industrial machine control - Operator panel with safety functions ==== Electrical Connection - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Connection power main motor: 7.5 kW - Total connection power: 10 kW ##### Dwodpfjxd Tiqex Ai Eed Application areas: Die-setting, tool try-out, mold making, tool making, injection molding tools, automotive, prototype construction, trial tools, maintenance, production preparation (Die-setting press, try-out press, tool try-out press, hydraulic press, REIS TUS 100, 100 ton press, 4-column press, testing press, mold making press) Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply with all points of the national Brazilian safety standard NR 12, which is based on these. Our core strength lies in special machine construction and press automation. We distribute customized hydraulic presses at surprisingly favorable prices. For the hydraulics of the presses, components from leading European manufacturers are mainly used.

Condition: good (used), Year of construction: 1997, Transfer press REIS TUS 100-100, serial no. 02.246.00, year of manufacture 1997, pressing force 1,000 kN, weight approximately 8.5 t. Dwjdpfx Ajz Icbuji Esd

Condition: like new (used), Year of construction: 1989, Sheet stamping press ERFURT PE2-H-315 ES Manufacturer: ERFURT Made in: Germany Dwedpfx Aijyir Uks Eed Specification: Max slide-block force over distance to bottom dead center 12.5 mm: 3150 kN Slide-block force over distance to bottom dead center 160 mm: 1100 kN Idle stroke amount: 25 mm Slide-block stroke: 500 mm Min closed die height: 680 mm Max closed die height: 1000 mm Moving table dimensions: 2800x1500 mm Die cushion: -Max stroke: 160 mm -Adjustable stroke: 160 mm -Max double-acting force: 630 kN -Max ejector force: 630 kN Main motor power: 45 kW Height above floor level: 7100 mm Press weight: 71.3 tons

Condition: used, Year of construction: 1987, pressure 400 t table length 2500 mm table width 2000 mm Distance between columns 2000 mm Stroke 2600 mm Distance table/ram, stroke up 2500 mm Table surface area 2000 x 2500 mm Table height above floor 1120 mm Ram surface 2000 x 2500 mm Side window 1500 mm Dwsdpozrpuxefx Ai Esd max. capacity of swivelling ram plate 20 t Oil volume 1000 l Power capacity 48,0 kW Weight 85,0 t Dimensions (WxDxH) 8,6 x 5,3 x 8,2 m with swivelling ram, movable table, inclining table, ejector in table stored in dismantled condition - Video at seller's site before dismantling available

Condition: ready for operation (used), Year of construction: 1990, Erfurt Press PEZZ 400/2000 Year of manufacture: 1990 Djdps Adr A Hofx Ai Eewd Power: 400 tons Table dimensions: 1250 x 1800 mm Stroke: 250 mm Number of strokes per minute: 25 (min) to 60 (max) Ram adjustment: up to 160 mm Main motor: 40 kW Weight: approximately 45 tons Video available

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, machine/vehicle number: 02.056.00, overall weight: 11,000 kg, space requirement length: 2,420 mm, space requirement width: 2,040 mm, space requirement height: 3,220 mm, TECHNICAL DATA: - Pressing force (infinitely variable): 1000 kN - Max.ejector force: 30 kN - Retraction force: 300 kN - Pressing speed: 8 mm/sec. - Rapid traverse: 48 mm/sec. - Opening speed: 44 mm/sec. - Retraction speed: 23 mm/sec. - Press travel (stroke): 600 mm - Spray nozzle stroke: 70mm - Max.spray volume: 5 dm3 - Surface Ram top: 1000 x 1200 mm - Surface Ram below: 998 x 1280 mm - Distance between columns: 1130 mm - Plane parallelism between upper and lower plate: +/- 0.1 to 600mm lenght with uniform load distribution - Maximum mould weight: 7000 kg - Load capacity of swivel plate: 3500 kg - Power connected load: 30 kW - Motor power: 7.5 kW - Sprays pressure max-min.: 4 - 10 bar - Max.flow pressure: 190 bar - Return pressure: 190 bar - Air comsumption injection: 20 - 50 Ndm3 Dwodpsupy Abofx Ai Eod - Tank: 140 l

Condition: used, Year of construction: 1994, Pressing force: 100 t Dwsdpfx Aiozyl Nbo Eed Stroke: 600 mm Frame width: 910 mm Side frame opening: 685 mm

Condition: good (used), Year of construction: 1997, Transfer press REIS TUS 180 S-200, serial no. 04.027.00, year of manufacture 1997, pressing force 2,000 kN, weight approx. 48 tons. Dwedpfx Aisz Icbho Eed

Condition: good (used), functionality: fully functional, Pressing force: 40 tons Table surface area: 590 x 1000 mm Ram surface area: 590 x 1000 mm Stroke: 900 mm Table is extendable, ram plate is swiveling. Dodpszxmgrofx Ai Eowd

Condition: used, Year of construction: 1987, pressure 4000 kN table length 2500 mm table width 2000 mm dayligth 2500 mm Djdpfxsynmncs Ai Eowd stroke 2600 mm tank capacity 1000 l total power requirement 56 kVA weight of the machine ca. 85 t dimensions of the machine ca. 9,2 x 3,1 x 8,2 m integrated wax-injection unit with 0-5 bar

Condition: used, Year of construction: 1985, pressure 200 t table length 1500 mm table width 1200 mm Distance between columns 1250 mm Stroke 1150 mm Table surface area 1200 x 1500 mm Distance table/ram, stroke up 1475 mm Table height above floor 638 mm Ram surface 1200 x 1500 mm Weight 16,0 t Dimensions (WxDxH) 2,2 x 4,52 x 4,6 m with pivoting ram, moving and tiltable table, ejector in table, ram interlocking via toothed bar, injection unit in ram Dwedjzrpurepfx Ai Eed

Condition: ready for operation (used), Year of construction: 1981, operating hours: 376 h, functionality: fully functional, machine/vehicle number: 01031, table width: 570 mm, table length: 670 mm, overall weight: 10,000 kg, clamping force: 400 kN, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the period of November 16, 2026, and November 26, 2026! Dodoz Iluqepfx Ai Eowd TECHNICAL DETAILS Closing force: 400 kN Table dimensions: 670 × 570 m MACHINE DETAILS Operating voltage: 380/260 V Frequency: 50 Hz Rated current: 25 A Power: 7.5 kW Dimensions & Weight Dimensions (L x W x H): 2,500 x 1,900 x 3,200 mm Weight: 10,000 kg Recorded operating hours: 376 h External reference: Alesco - Lot 76

Condition: excellent (used), Year of construction: 2001, pressure 100 t table length 2000 mm table width 1580 mm voltage 400 V max. table loading capacity 10.000 / 20.000 kg total power requirement 18 kW weight of the machine ca. 22 t dimensions of the machine ca. 5,65 x 2,95 x 5,85 m Serial no: 03.246.00 max. Distance between columns (width) 1620 mm d upper table no swiveling 10t / swiveling 6t Dwjdsucgqwepfx Ai Eed d lower table 22t

Condition: used, pressure 160 t Dwodpfx Aisiulkqs Eod passage width / mm stroke / mm Working height 800 mm total power requirement 15 kW weight of the machine ca. 11,8 t - Table size: 1000x1000mm - Distance table/ram, large stroke above, gain. above: 800mm extra information Removable table

Condition: used, Year of construction: 2005, functionality: fully functional, Spotting Press – Manufacturer: Reis – TUS 130-100 – 26–100 t Spotting Press – Table 1,600 × 1,300 mm For sale is a spotting press from manufacturer Reis, model TUS 130-100, with an adjustable pressing force from 26 to 100 t. This machine features a spacious table area of 1,600 × 1,300 mm, a daylight opening of 1,700 mm, as well as extensive features such as a tilting ram plate and integrated ejector. It is especially suitable for spotting, adjustment, and tryout work in tool and mould making. ===== Technical Data & Information: Spotting Press Reis TUS 130-100 – 26–100 t ==== General Information - Manufacturer: Reis - Model: TUS 130-100 - Drive Type: 4-column spotting press - Pressing force: 26 – 100 t (adjustable) Dodexd Tv Dspfx Ai Eowd - Machine weight: approx. 17,000 kg - Dimensions (W × D × H): 4,900 × 2,800 × 5,500 mm ==== Working Area - Maximum daylight: 1,700 mm ==== Table and Ram - Table size: 1,600 × 1,300 mm - Max. table load: 12,000 kg - T-slots: DIN 650 – 22 mm ==== Forces - Retraction force: max. 45 t ==== Hydraulics - Hydraulic pump: Rexroth SYDFE2x/071R-PPA.. - Motor power: 15 kW - Operating pressure: max. 200 bar - Pressure accuracy: ± 5 bar - Oil tank volume: approx. 475 l - Hydraulic oil: HLP 36 ==== Electrical System - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Main motor connection: 15 kW - Total connected load: approx. 21 kW ==== Control System - Siemens Simatic S7-634 - Operation via control panel - Functions: - Ram up / down - Ram tilting - Table traverse - Ejector control - Adjustable press force ==== Features - Tiltable ram plate: 180° (up to 7.5 t tilted) - Ejector in ram: 5.6 t / 160 mm stroke - Stroke extension: +300 mm - Increased speed feature ==== Documentation - Hydraulic schematic - Electrical schematic - Technical drawings - Data sheet ===== Spotting, tool tryout, tool adjustment, mould making, tool making, tryout processes Spotting press, tool tryout press, tryout press, tool adjustment press, tool tryout press, sample press, hydraulic press Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are designed and manufactured according to the German Machinery Directive, European Machinery Directive (Directive 2006/42/EC), EC standards and EU safety regulations. Additionally, our presses exceed Canadian and European safety requirements, as they comply in all points with the Brazilian national safety guideline NR 12, which builds on these requirements. Our greatest strength is special machine construction and press automation. We supply customized hydraulic presses at surprisingly competitive prices. The hydraulics are predominantly equipped with components from leading European manufacturers.

Condition: ready for operation (used), Year of construction: 1985, 1 used spotting press Manufacturer: REIS Dwedpfoyb Stqox Ai Eod Model: TUS 160 OK 200 Year of manufacture: 1985 Technical details: Press force: 200 t Table length: 2200 mm Table width: 1550 mm Installation height: 2200 !! mm Ram return force: 6,000 kg Table load capacity: 10,000 kp Total power requirement: ? approx. 25–30 kW Machine weight: approx. 30 t Space requirements: approx. 4 × 7 × 7 m Shipping dimensions: approx. 13.4 × 3 × 3 m

Condition: used, machine/vehicle number: 008794, Max width workable: 800 mm Max length workable: 2500 mm Max height workable: 1340 mm Dwjdpfe Aia Rqjx Ai Eed Max feed speed: 40 m/min