Spotting Press

HESSMERT 160 EST

Condition: refurbished (used), Our Leybold RUVAC WAU1001 Roots-blower pumps will: be good as new be checked after the manufacturer's specifications, for example its tolerances be fitted with new wear parts be available at short notice Kedsfq D Hvepfx Abvedn included one-year warranty

Condition: excellent (used), Year of construction: 2022, Four Kardex Shuttle XP 500 units from 2022 for sale. Since installation, the machines have been regularly maintained by the manufacturer and are in very good condition. These Vertical Lift Modules are equipped with trays measuring 4,050 mm wide and 813 mm deep. This is Kardex’s widest standard model, offering ample storage capacity while keeping the footprint to a minimum. The machines stand 4,950 mm tall, making them ideal for use in facilities with lower ceiling heights that still require increased storage capacity. Each tray provides approximately 3.3 m² of storage space. With about 35 trays per machine, each unit delivers around 115 m² of storage. Combined, the four machines offer approximately 460 m² of storage area, while occupying only 52 m² of floor space. Every tray supports up to 320 kg, giving each machine a total load capacity of up to 11,200 kg with 35 trays installed. If needed, additional trays can be added. All trays feature 75 mm high tray edges. The machines are in excellent condition and are ideally suited for companies looking to maximize storage capacity efficiently. Ksdpfey R U Nzsx Abvsdn Technical Information: Year of manufacture: 2022 Model: SHUTTLE-XP-500-4050x813 Machine height: 4,950 mm Machine width: 4,380 mm Machine depth: 2,972 mm Tray width: 4,050 mm Tray depth: 813 mm Number of trays: Approx. 35 per machine Maximum load per tray: 320 kg Electrical specification: 3/N/PE 400V, 23A

Condition: good (used), Year of construction: 1962, High speed radial drilling machine, radial drilling machine, drilling machine, boom drilling machine, high speed radial drilling machine -Clamping table: 400 x 1100 mm -Projection: 930 mm -Taper mount: MK4 -Engine power: 1.35/1.8 kW -Speed: 41-1700 rpm -Columns: Ø 200 mm -Spindle stroke: 125 mm -Thread cutting device: YES -Feed: 0.075 - 0.3 mm/rev -Dimensions: 1800/1235/H2240 mm Ksdpsirax Usfx Abvsdn -Weight: 1500kg

Condition: new, Year of construction: 2024, Bending force: 320 t Year of construction: New (delivery time 6-8 weeks) Control: DT 15 Kedpfjfifg Hex Abvodn bending length: 3050 mm distance between the columns: 2600 mm Y Fast speed: 160 mm / s Y Working speed: 10 mm / s Y Retraction speed: 140 mm / s Motorized crowning table length: 630 mm table width: 154 mm table height: 900 mm stroke: 365 mm Projection: 410 mm 2 support arms 2 Backgauge fingers Travel speed X-axis: 250 mm / s R-axis working speed: (max.) 140mm / s R-axis travel: 250 mm Standard equipment: Y1, Y2, X (3-axis) Y1, Y2, X = 650 mm (double guide, aluminium) Software D-BEND for 3D bending simulation and alignment Manual crowning R axis, manual Backgauge with motor, linear guide and ball screw Backgauge with height adjustment (R-axis, manual) CE-die holding system (upper dies) Front support arms for sheets, sliding (with T-channel and stops) Hydraulic blocks and valves in special design, according to the worldwide applicable standards Electrical equipment, in accordance with the standards applicable worldwide Option: CE standard with manual fussler AKAS II M -FPSC-B-C (SAFETY PLC) CNC motorized crowning Y1, Y2, X, R (4 axes) CNC motorized crowning Engine power 37 kW Oil tank capacity 250 lt length 4300 mm Width 1820 mm Height 3230 mm Weight approx. 17250 kg

Condition: as good as new (ex-display), For sale Demag wheelblocks Ksdpoh Uqibsfx Abvjdn New and uses NB! we have more than 15,000 Demag parts in stock see our website or other ads

Condition: used, mileage: 635,000 km, power: 405 kW (550.65 HP), first registration: 05/2011, fuel type: diesel, overall weight: 18,000 kg, brakes: retarder, gearing type: semi-automatic, emission class: euro5, loading space length: 4,500 mm, loading space width: 2,360 mm, loading space height: 600 mm, Equipment: soot filter, - Retarder - Air conditioning - Tow bar - 3-way tipper Suspension: Leaf springs Kdjdpfx Aoyaml Sjbvsn

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 119/020.0895, Manufacturing origin CH Voltage 400 V Netweight 4500 kg Custom position 8460.2320 Dimensions 2700x2350x2100 mm TECHNICAL DATA Control Fanuc 16i-T Center height 175 mm Distance between centers 1000 mm LINEAR AXES Grinding length 500 mm Strokes X : 267 mm Kdjdpfxelbgfce Abvon Z : 650 mm WHEEL HEADSTOCK Continuous orientation +/- 8.5°. External grinding wheel size 500x80x203 mm Power 7.5 kW Speed 44 m/sec. WORKPIECE HEADSTOCK Taper type MT5 C-axis +/- 5 Power 1 kW Speed 30-1000 min-1 TAILSTOCK Taper type MT3 Sleeve stroke 35 mm Sleeve diameter Ø 50 mm Max. workpiece weight 130 kg POWER SUPPLY Voltage 400V 50 Hz errors and omissions excepted-data given without obligation Fully overhauled: Mechanics, geometry, hydraulics and electrical parts checked and/or replaced. Grinding headstock Disassembly, cleaning of parts, replacement of worn and defective parts, overhaul of motor, replacement of bearings, replacement of belts, disassembly of spindle, replacement of seals and O-Rings + adjustment. New paintwork. Headstock Dismantle, clean parts, replace worn and faulty parts, overhaul motor, replace belts. New spindle bearings. New paintwork. Tailstock Dismantled, checked and overhauled. Hydraulics Dismantle, check motor, replace hoses, defective and worn parts. Check hydraulic block X-axis Dismantle, replace worn parts such as O-Rings, seals, rings etc., overhaul hydraulic piston, grind tables. Z axis Dismantle, grind tables, replace worn and defective parts, overhaul hydraulic piston, new paintwork. Electrical cabinet Complete check, change various relays. Painting Colors: White RAL 9003 and gray RAL 7011 Geometry according to manufacturer's protocol. Inspection and cleaning of various accessories

Condition: excellent (used), Year of construction: 1997, pressure 170 t chamfer lenght 4080 mm distance between columns 3680 mm column arm 410 mm dayligth 385 mm stroke 215 mm ajustment speed 200 mm/sec working feed 1-10 mm/sec return speed 135 mm/sec table width 200 mm table height 1050 mm Number of working hours 25.430 h oil volume 350 l total power requirement 29 KVA weight of the machine ca. 16.450 kg. range L-W-H 4620 x 2210 x 2885 mm Machine in good condition Regularly serviced by the manufacturer CNC backgauge with 8 axes (!!) - in checked conditions - machinevideo - ?v=yEaRj0XJAC4 Equipment: - CNC electro-hydraulic press brake/die bending press - DELEM CNC control - swiveling front left * High-resolution graphic screen * Clear, concise menus in the operator's language * Large tool and product library * Graphic 2D programming * Automatic bend sequence calculation and collision detection Kdedpfexcp Rbox Abvsn * Emergency stop button at front - CNC axis adjustment: * Y1 - Y2 - X1 - X2 - R1 - R2 - Z1 - Z2 axis + CNC crowning - X axis - adjustment speed: 500 mm/sec. * Max. stop range: 860 mm - R axis - Adjustment speed: 300 mm/sec. * Max. travel: 250 mm - Z axis - Adjustment speed: 1000 mm/sec. * Max. travel: 3260 mm - CNC electric motor table crowning - CNC electro-pneumatic die shift (I axis) - WILA / TRUMPF upper tool clamping - hydraulic - WILA / TRUMPF lower tool clamping - hydraulic - 2x front, robust support arms - movable - 1x freely movable 2-hand/foot control - 1x freely movable foot switch - Side safety device (swivel doors) - Rear safety device (sliding doors) - Original operating instructions

Condition: used, mileage: 19,950 km, first registration: 11/1989, fuel type: diesel, axle configuration: 4x4, gearing type: mechanical, Year of construction: 1989, Equipment: all wheel drive, Mercedes-Benz 1428 AF 4x4 (central and rear axle lock, gear reduction) with 7 seats Water tank: 2,500 liters Kdodpfx Abjfarx Ujvsn Pump: Metz with 2,800 l/min Additional equipment: Quick attack on the right with 50 meter hose Dimensions (LxWxH): 7100 x 2300 x 3000mm Wheelbase: 3800 mm Tires: 275/70 R22.5

Condition: excellent (used), functionality: fully functional, workpiece weight (max.): 10,000 kg, grinding length: 6,000 mm, grinding diameter: 800 mm, Cylindrical Grinding Machine STANKOIMPORT 3M196 / 6000 We offer a heavy-duty cylindrical grinding machine from STANKOIMPORT, model 3M196 / 6000. The machine is designed for machining large and heavy workpieces and is suitable for heavy industry, energy sector, shipyards and shaft production. 🔧 Technical data: Manufacturer: STANKOIMPORT Model: 3M196 / 6000 Grinding length: 6000 mm Grinding diameter: 800 mm Center height: 410 mm Max workpiece weight: 10,000 kg Grinding wheel diameter: 750 – 900 mm Spindle taper: Morse 6 Dimensions (L x W x H): 12,000 x 3,000 x 2,500 mm Machine weight: 45,000 kg Kdodpfx Aboy Hrr Ssvon 📌 Description: Heavy-duty and rigid construction Suitable for continuous industrial operation Ideal for long shafts and large components Proven and reliable design 📍 Location: Poland 🚚 Terms: Price: on request Machine can be inspected Loading included Transport can be arranged