Used Heating Plate Press for sale (35,495)

Condition: used, Heraeus Type: UT 6060 Heraeus heated and forced-air drying oven up to 300°C Manufacturer / Type: Heraeus UT 6060 Features: Nsdpfx Aezd Rwrjkqedc Temperature range: 300°C Net volume: 52 liters Weight (empty): 53 kg Internal dimensions: Depth 403 mm, Width 340 mm, Height 380 mm External dimensions: Depth 744 mm, Width 535 mm, Height 552 mm Rated voltage 230V, Rated frequency 50/60Hz, Rated current 6.8A, Rated power 1.50kW Includes 2 inserts Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: used, Weiss   Type: WT-1000/70/5   Weiss temperature testing chamber, water-cooled With a temperature change rate of 5 K/min   Data for temperature tests: Temperature range: -70 °C to +180 °C Temporal temperature deviation in the center of the usable space: ± 0.1 to ± 0.5 K Spatial temperature homogeneity: ± 0.5 to ± 2 K   Temperature change rate: Heating: 6.1 K/min Cooling: 6 K/min   Permissible test specimen weight: Total load on the test chamber floor: 150 kg Load per insert shelf: 50 kg   Dimensions: Test chamber dimensions: Height 950 mm, Width 1100 mm, Depth 950 mm External dimensions: Height 2000 mm, Width 1415 mm, Depth 2105 mm   Test chamber volume: 990 liters   Data for operation: Nominal voltage: 3/N/PE AC 400 V ± 10% 50 Hz Nominal current: 38 A Nominal power: 26 kW Refrigerant: R404 / R23 Weight: approx. 955 kg   Ndjdpfx Akoy D Nyuoqsc Information for buyers: To ensure the safety of our customers, the following work will be carried out on the offered climate chambers in advance:   1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak test with certificate 4. Documented test run after successful inspection   Condition: used   Scope of supply: (See image)   (Changes and errors in the technical data are subject to change!)   We will be happy to answer any further questions you may have by telephone.

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 87700 € 1657.53 € 130 to 4.5 mm Njdpfxjwiqn Rs Akqjdc 650 mm 950 mm 220 mm 1 - 132 mm 50 1/min 6 95 mm 70 mm 325 mm 500 mm 11 kW 1800 mm 1725 mm 3020 mm 8000 kg Welded steel frame construction 8-fold ram guide Pneumatic clutch-brake combination Protective enclosure with light barriers and side doors Hydraulic overload protection Two-hand and foot pedal operation Manual stroke adjustment Motorized ram adjustment Variable stroke rate via frequency converter Operating modes: * Adjustment mode * Two-hand release * Foot release * 2-stroke operation via light barriers * Continuous operation Touchscreen for * Stroke counter with preselection for continuous operation * Stroke rate adjustment * Lubrication intervals and duration * Alarm messages * Motor direction of rotation * Monitoring of inputs and outputs 2 free cams for connecting peripherals Automatic central lubrication Equipment in accordance with CE regulations Symbolic photos, picture incl. optional available bolster plate OPTIONS: vibration pads € 192,00 bolster plate o.r. hydr. overload safety device o.r. etc.

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 61200 € 1156.68 € 80 to 4 mm 600 mm 900 mm 200 mm 1 - 110 mm 60 1/min Ndodpfx Akjwiq I Doqec 6 80 mm 50 mm 300 mm 400 mm 7.5 kW 1600 mm 1500 mm 2750 mm 5700 kg Welded steel frame construction 8-fold ram guide Pneumatic clutch-brake combination Protective enclosure with light barriers and side doors Hydraulic overload protection Two-hand and foot pedal operation Manual stroke adjustment Motorized ram adjustment Variable stroke rate via frequency converter Operating modes: Adjustment mode Two-hand release Foot release 2-stroke operation via light barriers Continuous operation Touchscreen for Stroke counter with preselection for continuous operation Stroke rate adjustment Lubrication intervals and duration Alarm messages Motor direction of rotation Monitoring of inputs and outputs 2 free cams for connecting peripherals Automatic central lubrication Equipment in accordance with CE regulations (sample photos) OPTIONS: vibration pads € 192,00 bolster plate o.r. hydr. overload safety device o.r. etc.

Condition: used, Heavy-duty hydraulic hole-press, perforated panel press or gluing press for gluing or securing workpieces such as frames, panels, windows or doors. Technical data: - Cylinders: 6 - Hold-down units: 3 - Pressing area: 260 x 145 cm Ndedjzryy Sepfx Akqsc

Condition: used, Münch RMP 660 pellet press for the production of wood pellets and biomass pellets from sawdust, wood shavings and other organic waste materials. The machine is suitable for industrial pellet production, offering high pressing capacity and consistent pellet quality. Ideal for wood processors, sawmills and biomass plants. Technical data: - Screen: 6 mm - Motor: 2 x 90 kW Ndjdpfxjzryyre Akqjc - Inner diameter of die: approx. 660 mm - Number of press rollers: 2 - Pressing capacity: up to approx. 3–5 t/h

Condition: new, Technische Daten: Nsdpfsfh Tmmsx Akqsdc Abmessungen der Heizplatten 3000 x 1300 mm Anzahl der Heizplatten 2 # Anzahl der Presszylinder 6 # Pressdruck 90 t (900 kN) Zylinderdurchmesser 70 mm Anzahl der Etagen 1 # Etagenöffnung ca. 400 mm Anschlussleistung ca. 21,0 kW ELEKTRISCH BEHEIZBARE TISCHE (ELKOM - Deutschland) Der Tisch besteht aus 2 kalibrierten Aluminiumplatten, in denen die elektrischen Widerstände verlegt sind. Die maximale Betriebstemperatur ist 120 Grad C. Im am Tisch wird eine Dämmplatte montiert, die zur Wärmeisolierung gegenüber der Presse dient. Der Bau des Tisches und die präzise Verarbeitung, die von spezialisierten Firmen vorgenommen werden, gewährleisten eine sehr gleichmäßige Verteilung der Temperatur. Die Heizplatten sind mit speziellen Halterungen an der Presse befestigt um die Wärmeausdehnung zu erlauben, außerdem erleichtern sie die Wartung und das Auswechseln. Spezifischer Betriebsdruck des Tisches bis zu 10 kg/cm2 Max. Temperatur der Heizplatte 120 Grad C Arbeitstemperatur 90 Grad C Schuetzsteuerung Waermeschutzschalter Die Zylinder sind aus spezial geschweissten und gross dimensionierten Stahlrohren hergestellt. Hydraulik: Kompakte hydraulische Einheit Fabrikat HAWE aus Deutschland. Pumpe fuer Schliessphase und Druckaufbauphase. Automatische Nachdruckverstellung Leistung der hydraulischen Einheit 3 kW Bewegung des Presstisch von unten nach oben. Pressengestell: Das Pressengestell besteht aus einer schweren verwindungssteifen und spannungsfrei geschweissten Stahlkonstruktion. Beide Presstische sind aus HEA-Profilen geschweisst. Die Bearbeitung der Baugruppen erfolgt auf CNC-Barbeitungsmaschinen. Bewegung des Presstisches mit Zahnstangen und Parallelfuehrung an 2 Ecken des Presstisches aus selbstschmierenden Material. BEDIENTAFEL mit Display und Tastatur: Bedientafel Siemens mit 7-Zoll-Farb-Touchscreen mit Verbindung zum Ethernet- Netzwerk für den Fernwartungsservice. Das System ist mit einer eigenen Software ausgestattet durch die die Bedienung der Presse einfach und intuitiv erfolgen kann. Sie können folgende Parameter programmieren, abrufen und ändern: - Automatische Regelung des hydraulischen Drucks aufgrund des Werkstückgrösse und des gewünschten spezifischen Drucks. Das System reguliert den Druck der Zylinder automatisch und der Bediener muss keine Berechnungen mit Grafiken oder Tabellen anstellen. - Möglichkeit zum Speichern von bis zu 100 Arbeitsrezepten (Temperatur, spezifischer Druck, Pressdauer, Plattengrösse). - Direkteinstellung des hydraulischen Drucks der Zylinder mit digitaler Kontrolle aufgrund der Grafik. Dieses System kann alternativ zur automatischen Regulierung verwendet werden, falls Sie lieber mit der herkömmlichen Methode arbeiten. - Elektronische Regelung der Pressdauer - Elektronische Kontrolle der Temperatur der Tische - Automatische Wiederherstellung des Drucks aufgrund des Nachgebens des Materials. - Komplette Diagnostik und Störungsanzeige mit Meldungen am Display. WEITERE AUSSTATTUNG UND MERKMALE DER PRESSE Haken zum Anheben der Maschine um das Laden/ Entladen der Maschine beim Transport zu erleichtern. Nivelliervorrichtungen die an den Füssen der Presse montiert sind. In die Presse integrierte Schalttafel; dadurch sind weniger Aussenkabel notwendig, die vorhandenen sind jedoch auf jeden Fall angemessen geschützt. inkl. Option: Fehlbelegungsüberwachung (Ebenheitskontrolle)

Condition: used, total length: 3,400 mm, total width: 1,800 mm, total height: 2,600 mm, Year of manufacture: 1994 Colour: Grey Weight: 10.400 kg Price: On request - Year: 1994 - Serial number: 1776 - Drive system: Conventional - Power [kW]: 22.0 - Number of axes [pcs]: 3: Y1+Y2+X - Press force [ton]: 220 - Max. working width [mm]: 3050 - Column gap [mm]: 2620 - Backgauge depth [mm]: 800 - Max. stroke [mm]: 240 - Crowning system: None - Punch holder: Standard - Tool holder type: European-style - Tools included: Yes - Options: Digital readout - Transport dimensions: 3400mm x 1800mm x 2600mm (l x w x h) - Transport weight [kg]: 10400kg Njdjybdtcepfx Akqodc - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), pressing force: 5 t, For sale: Schling DUO 5T pneumatic press. Ndedpfxjz Sarhj Akqec

Condition: excellent (used), For sale is a complete, industrial pneumatic press in a workshop configuration, ideal for punching, stamping, pressing, or other assembly processes. The set includes: • a pneumatic column press with a robust, steel construction Ndjdpez Sawdjfx Akqec • a control valve, actuator, and pneumatic distribution system • an integrated control panel with an emergency stop switch • a steel work table with adjustable side guides • a power cabinet, distribution board, and cable routing • a table on wheels with a transport brake Drive: pneumatic power supply Control: solenoid valves, start/stop buttons Power supply: 230 V (electrical system integrated into the base) Technical condition: very good. Used, fully functional set ready for operation in a workshop. Industrial design, not for amateur use.

Condition: excellent (used), For sale, a used bench-type demagnetizer designed to remove magnetization from steel components, tools, machine parts, and machined parts. The device features a robust, industrial-grade construction with a large work surface. Demagnetization is performed by evenly moving the component across the work surface, as instructed on the front panel. The visual condition matches the photos – normal signs of wear and tear are visible, consistent with its use. The exact unit shown in the photographs is the one being sold. Technical data: Ndjdpfx Aez Snczjkqsc Type: Demagnetizer Model: 35136-25 B1 Device number: 10103874 Type: Bench-type (plate) demagnetizer Application: Demagnetization of tools, machine parts, steel parts, and ferromagnetic components Work surface dimensions: approximately 30 × 20 cm Applications: Mechanical workshops Tool rooms Grinding shops Production facilities Machine service centers Quality control

Condition: excellent (used), For sale is an industrial gas burner, Weishaupt WM-G10/3-A monarch®, in ZM design, complete with DUNGS gas fittings and accessories as shown in the pictures. With a thermal output of 100–1000 kW, this burner is suitable for installations requiring high performance, such as industrial boiler rooms, heating and process boilers, after selecting the burner according to the equipment's parameters. A key advantage of this offer is the extensive range of included equipment: in addition to the burner, you also receive a double gas valve DUNGS DN65, a pressure regulator, flange components, and a Weishaupt control panel. The entire set is sold in the configuration shown in the photographs. Burner data from the nameplate: Manufacturer: Max Weishaupt GmbH Series: monarch® Model: WM-G10/3-A Design: ZM Year of manufacture: 2010 Serial number: 5970155 Type of gas indicated on the nameplate: N Thermal output range: 100–1000 kW Gas connection pressure range: 15–500 mbar NOx class: 2 Nodpfx Asz Spgpjkqodc Main power supply: 400 V, 3~, N, PE, 50 Hz Control voltage: 230 V, 1~, 50 Hz Electrical power: 1.86 kW Protection class: IP54 Country of manufacture: Germany CE marking: CE-0085BQ0027 Fittings and equipment shown in the pictures: Double gas valve DUNGS DMV 5065/12 Nominal valve diameter: DN65 Maximum valve pressure: 500 mbar Valve catalog number: 245099 Valve marking: class A, group 2, EN161 Gas pressure regulator Presostat DUNGS GW 50 A2 Weishaupt / Berger Lahr STE 50 actuator, 24 V DC power supply Weishaupt control panel with display Manometer Tubular elements, flanges, connectors, and wiring shown in the pictures Condition and scope of sale: The unit has visible signs of use, dirt, and localized corrosion on the steel components. The pictures show the actual item offered and serve as the basis for determining the scope of delivery. This offer includes the burner together with the shown accessories. Selection for a specific boiler, installation, and adjustment should be entrusted to a gas burner service company.

Condition: excellent (used), For sale is a professional Thermo Haake C30S Phoenix II laboratory thermostat, designed for precise cooling and heating of liquids and temperature stabilization. The unit can operate as a thermostat bath or a circulator to supply external measurement and research systems. It is equipped with a Phoenix II controller with a clear LCD display, allowing for convenient setting and control of operating parameters. Upon startup, it displays the current temperature and the setpoint value, confirming the correct operation of the controller. Technical data: Manufacturer: Thermo Haake Model: C30S Controller: Phoenix II Controller type: 003-6431 Device type: 003-8195 Power supply: 230 V / 50–60 Hz Current consumption: 9.2 A Refrigerant: R134a Protection rating: IP20 / IP30 RS-232 interface Multi-Port Digital temperature control Connections for external liquid circuit Mobile design with wheels Application: The unit is ideal for: laboratories, quality control, material research, use with laboratory equipment, cooling and heating of measurement systems, Ndedsz Snbqepfx Akqoc temperature stabilization of liquids. Condition: used, functional, controller operates correctly, display is clear, normal signs of use, the tank contains beads to reduce medium evaporation, sold exactly as shown in the photos. Included in the set: Thermo Haake C30S thermostat, Phoenix II controller, beads for the thermostat bath, located in the tank.

Condition: excellent (used), High-end hydraulic tool from the renowned manufacturer CEMBRE. This device delivers high clamping force and convenient operation thanks to battery power. Robust construction and reliability – equipment used in professional applications. 📊 Technical specifications: Manufacturer: CEMBRE Model: B35-50D Njdoz Smyrepfx Akqsdc Clamping force: 35 kN (approx. 4 tons) Max. cross-section: up to 150 mm² (Cu) Power supply: battery-powered Year of manufacture: 2010 📦 Included: CEMBRE hydraulic press Battery Charger Transport case Documentation Additional items as shown in the photos 📦 Condition: Very good technical condition Fully functional Normal signs of use Ready for work

Condition: good (used), Nagel Citoborma 280B Paper Drill The unit is in 100% working order. It is one of the latest models. The drilling table is adjustable in all directions (laterally and front-to-back). It features stops for setting the drilling spacing. The installed table is an enlarged version. Additionally, the paper drill is equipped with an automatic table lock that releases after every cycle. Excellent condition. Robust construction – weight: 76 kg. Power supply: 380V. Two drilling heads with an adjustable spacing range of 45–120 mm. Drill bit diameter: 2–20 mm. Stack height: 60 mm. The machine has undergone a full inspection. Ndjdpfx Ajz S Upmjkqsc Includes drill bits, tools, a new cutting stick, and an instruction manual.

Condition: good (used), Stago PB 2015 Paper Drill The latest model from the manufacturer Stago; this machine comes from the office of a large company. The unit is 100% functional. The drilling table is adjustable in all directions (laterally and front-to-back). It features stops for setting the drilling spacing. The installed table is an enlarged version. Additionally, the drill is equipped with an automatic table-locking mechanism. Robust construction – weight approx. 70 kg. Power supply: 380V. Ndjdpfsz S Uwqex Akqsc Two drilling heads. Drill bit diameter: 2–10 mm. Stack height: 60 mm. Adjustable spacing between the heads. The drill has undergone a full inspection. Includes drill bits and tools.

Condition: used, total length: 2,300 mm, total width: 1,500 mm, total height: 2,880 mm, Year of manufacture: 1963 Empty weight: 8.000 kg - Year: 1963 - Serial number: 12691 - Drive system: Conventional - Press force [ton]: 160 - Min. stroke [mm]: 25 - Max. stroke [mm]: 118 - Table length [mm]: 950 - Table width [mm]: 650 - Ram width [mm]: 340 - Height adjustment [mm]: 75 - Motor power: 7.5kW - Transport dimensions: 2300mm x 1500mm x 2880mm (l x w x h) Ndjdpfx Aewmfrrokqoc - Transport weight [kg]: 8000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total length: 4,250 mm, total width: 1,950 mm, total height: 2,700 mm, Year of manufacture: 2016 Colour: Blue Weight: 10.520 kg Price: On request - Year: 2016 - CE marking present: Yes - Serial number: 73331611504 - Drive system: CNC - Power [kW]: 18.5 - Press force [ton]: 175 - Max. working width [mm]: 3050 - Column gap [mm]: 2600 - Throat depth [mm]: 450 Nodpfxezwuhzj Akqjdc - Backgauge depth [mm]: 1000 - Max. stroke [mm]: 265 - Tools included: Yes - Transport dimensions: 4250mm x 1950mm x 2700mm (l x w x h) - Transport weight [kg]: 10520kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: refurbished (used), functionality: fully functional, Year of construction: 1991, machine/vehicle number: plate roll 4roll 3000x13 mm, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 260 mm, roller (top) diameter: 280 mm, side roll diameter: 220 mm, roller diameter: 330 mm, roller length: 3,050 mm, working width: 3,000 mm, working height: 800 mm, sheet thickness (max.): 13 mm, sheet thickness steel (max.): 13 mm, sheet thickness stainless steel (max.): 13 mm, sheet thickness aluminum (max.): 18 mm, sheet thickness brass (max.): 18 mm, sheet thickness copper (max.): 18 mm, overall weight: 7,000 kg, total length: 5,000 mm, total width: 1,500 mm, total height: 1,500 mm, power: 7.35 kW (9.99 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, MCB3028 4 roll hydraulic plate bending machine capacity 3000x13 mm Make Davi Italy - year 1991 Plate width 3000 mm Plate thickness 13 mm Pre-bending 10 mm top roll size 280 mm pinch roll 260 mm Electric power Hp 10 380/50 Vac Configuration installed: -Hardened rolls Ndedpfo Aa Nm Uex Akqoc -Conical hydraulic attachment -Digital position readouts infinitely variable speed control via hydraulic lever distributor Driven rollers rotation with axial gearbox each roll central independent front open hydraulic drop-end to unload closed shells machine operating console centralized fully hydraulic -Extended rolls front shafts -one plus station hydraulic to connect an external tool support ---- Machine used refurbished and repainted, rollers surface cleaned, functional all controlled. Manuals and schematics original documents with the machine. Layout 5000x1500xH1500 mm weight 7000kgs

Condition: good (used), functionality: fully functional, Year of construction: 2007, Press force: 135 t Bending length: 3050 mm Distance between uprights: 2550 mm Stroke: 400 mm Overhang: 305 mm Usable installation height: 440 mm Table height: 800 mm Table width: 90 mm Machine weight (approx.): 9,100 kg Machine height: 2,500 mm Equipment: - CNC control system Cybelec VisiTouch (retrofit 2026) - 2 pcs. support arms - Foot switch - Side protective doors - Laser safety device - Tool holder EHT - Pneumatic die shifting - Crowning - Controlled axes: y1, y2, x, R Ndedpfx Akjzt R D Doqsc

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, pressing force: 230 t, Equipment: CE marking, documentation/manual, safety light barrier, Darley hydraulic press brake, 230 tons x 6200 mm, CNC control Delem DA65W Y1/Y2/X/R + crowning + laser safety system. Ndodpfx Akj Abalwjqec Machine in good condition, with annual maintenance performed by Darley.

Condition: excellent (used), Year of construction: 2012, TruBend 5230 including robot, well-maintained, in excellent condition. Ndodpoz Uxk Hofx Akqsc

Condition: used, Year of construction: 2013, machine/vehicle number: 201364, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 86 t, stroke length: 300 mm, table width: 3,000 mm, table length: 300 mm, table height: 400 mm, oil tank capacity: 16 l, total length: 1,500 mm, total width: 3,300 mm, total height: 2,000 mm, Equipment: CE marking, This used gluing press is fully functional and has been inspected in our workshop. The machine is specifically designed for pressing glued wooden parts into solid panels, table tops, and furniture components. Thanks to its vertical design, the available floor space is used optimally while maintaining a high production capacity. The press is equipped with six hydraulic cylinders that ensure even pressure distribution across the entire workpiece. With a total pressing force of up to 10 kg/cm2, the machine delivers consistent and high-quality pressing results. The robust steel construction guarantees years of reliable use, even under demanding production conditions. This used machine is in good technical condition and represents an attractive alternative to a new machine. As a result, you benefit from a reliable production solution at a competitive investment. Ndedpfxsz U R Hmj Akqjc

Condition: used, For inquiries regarding the vibratory plate, Mr. Herden will be happy to assist you (by phone). WEBER CR 7 MDM Hatz Diesel Vibratory Plate Compactor / New unit / in stock & immediately available Sales price: €9,190.00 net / €10,936.10 gross 3-year warranty Shipping available. The reversible soil compactors of the CR series stand out for their strong compaction performance and maximum efficiency. They are the first choice for compaction work in classic road and civil engineering, as well as paving construction. Balanced running characteristics, extremely smooth operation, and low hand-arm vibrations ensure a high level of operator comfort. CR 7 – Performance and Comfort in Perfection: Nodpfx Akeymv Snsqjdc - Infinitely variable forward and reverse travel. Hydraulic direction change - Throttle lever and hydraulic change-over protected within the guide bar - Low hand-arm vibrations - Fatigue-free operation with the height-adjustable guide handle - Protection for machine and engine through robust protective frame and full engine enclosure - Reduced maintenance thanks to self-tensioning centrifugal clutch - Easy servicing: all maintenance points are easily accessible - Safe and fast loading via a large, foldable lifting eye - Secure lashing for transport thanks to additional eyelets on the engine mount - Enhanced operating comfort with electric start including hour meter, engine oil and battery voltage monitoring - Fields of application: road and civil engineering, pipeline and trench construction, landscaping, sub-base for paving, setting pavers, and compaction of sand, gravel, or crushed stone Technical Data Engine: Hatz Diesel Maximum engine output: 7.5 (10.3) kW/HP Weight: 477 kg Centrifugal force: 65 kN Frequency: 74 Hz Working width: 65 cm We can also provide a financing offer upon request. We are an official sales and service partner for: - Westtech - Gierking GMT - OilQuick - Weber MT - Holp - DMS - Seppi M. - Magni telescopic handlers - JCB construction machinery - Mercedes-Benz - Iveco With a stock of 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany. We provide the complete Weber MT product range for you! Subject to errors and prior sale. = Additional Information = New: Yes Engine make: Hatz Contact Marius Herden for further information.

Condition: like new (used), Year of construction: 2019, Marking table Nodpfxeyhy Hve Akqsdc Dimensions: 120 x 80 x 90 cm including cabinet