Used Heating Plate for sale (21,472)

Condition: used, Year of construction: 1988, plate width 2500 mm plate depth 4000 mm plate height 345 mm no. of flutes 11 2 Dedsy Ty Rvepfx Ackech weight of the machine ca. 7000 t

Condition: good (used), Year of construction: 2013, Grote 16L Heated butter pump Dcsdpfx Asy R El Heckeh 2013, stainless, 16L heated butter pump, agitated hopper, discharge screw, mobile, 3Ph

Condition: ready for operation (used), length 6000 mm width 2500 mm Dcedpfjud Il Sjx Acksh total power requirement / kW Without PC and software Dimensions (L×W*H): 6000 × 2500 x 350 mm, without vacuum plate Manufactured according to DIN 876 / class II

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 2900 € 1270 mm 1.2 mm 68 mm 1.5 kW 1610 mm 700 mm 1160 mm 385 kg 3 Walzen asymmetric rolls - prebending longitudinal grooves in lower and lateral roll Infeed of the lower roller by a central lever - with gear reduction machine stand user manual in GERMAN orENGLISH Dedpfx Aoynndrsckjch

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 4900 € 109.71 € 1050 mm 3 mm 2 mm Dcsdjwirv Njpfx Ackjh 90 mm 2080 mm 700 mm 1250 mm 410 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by handwheel lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll tiltable upper roll conical rolling device user manual in GERMAN

Condition: good (used), Clamping plate, welding table, welding table, straightening plate -Clamping plate: solid design, with large vise -Clamping surface: 1200 x 1100 mm -Table height: 850 mm -Sheet thickness: 105 mm -Vise: Jaws 150 x 30 mm, clamping range 245 mm -Overall dimensions: 1300/1200/H1060 mm Dcsdpfx Ajy Tit Hjcksh -Weight: 1100 kg

Condition: used, plate width 3000 mm Djdpfxshrrluo Ackjch plate depth 4000 mm plate height 370 mm no. of flutes 12 flute distance 210 mm

Condition: good (used), Mounting plate, scribing plate, measuring plate, measuring table, leveling plate, scribing plate -Mounting plate: Straightening plate with support ribs and adjustable feet Dcedpfxey S Rnij Ackoh -Length: 3000 mm -Width: 1250 mm -Sheet thickness: 48 mm -Adjustable feet: Ø 300 x 670 mm -Transport dimensions: 3000/1255/H900 mm -Weight: 3500 kg

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 10001626, Equipment: documentation/manual, 2x Atlas Copco Heat Pump Compressor With Spares (Unused 2021) Atlas Copco heat pump compressor 1 with coupling Atlas Copco heat pump compressor 2 with coupling Oil system Run down tank With spares as seen in asset list Dcsdpoy Tccbsfx Acksh Note: Sales are conditional upon the satisfactory completion within 24 hours of conditional sale of a Business Partner Due Diligence Check (BPDDC) and an End User Statement form (EUS) by the buyer, and, if the buyer is not the end user, for each end user.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, We have two electric heaters with a heating capacity of 40 kW each for sale. The units are from 2025 and are in almost new condition. They were only operated for a few hours during trials for food production. Pumps and hoses for both units are included. The price of €1,800 applies to both units, including accessories. The units are located in Grimmen, Mecklenburg-Vorpommern. Dcodpfozbgp Hex Ackeh

Condition: ready for operation (used), functionality: fully functional, For sale: Davi 4-roll bending machine including table and extensive accessories. Model MCB ZA-45. Suitable for conical and cylindrical bending. Please submit your bid (one customer has expressed strong interest). Dcedpfxozbd N Dj Ackoh

Year of construction: 2026, condition: used, NEW – Year of construction 2026 Automatic loading and unloading station. Suitable for solid wood, MDF, gypsum fiberboard, cement fiberboard, and panel materials. Examples: doors, boards, MDF panels, fronts, gypsum fiberboard, facade panels. Adaptations to other products are possible. The machine operates at a constant speed and with a set loading and unloading capacity. This allows you to easily automate your feeding and stacking processes and increase process reliability. The system operates with a 2-circuit vacuum system. Siemens control panel. Technical data: - Manufacturer: Ka-Ma - Type: KR-1300-1 - Working width: 1,300 mm - Including belt conveyor, length 3,000 mm - Working height: 930 +/– 50 mm - PLC control, operation via a touch panel, Siemens S7-1200 - Loading and unloading of parts using 2 suction plates, length 442 mm - Automatic signal after the loading process is completed - Max. horizontal speed: 0.5 m/s - Horizontal working stroke: 1,300 mm - Max. vertical speed: 0.5 m/s - Stack height: approx. 1,000 mm (including pallet under the stack of panels) - Loading side on the left when viewed in the direction of travel - Vertical working stroke: approx. 1,200 mm - Max. lifting weight: approx. 85 kg, continuous operation 65 kg - Max. component width: 1,300 mm Dodpfey S S Htox Ackoch - Max. component length: approx. 2,850 mm - Max. conveyor belt speed: continuously variable up to max. 10 m/min - Electrical motor power: 1.5 kW - Electronic components: Schneider Electronics and Siemens - Weight: 1,200 kg Optional: - 2-circuit vacuum system with 4 additional suction cups, which lifts the panels by 15 mm on one side before the vertical movement. This is required for all through-suction materials.

Year of construction: 1999, condition: good (used), functionality: fully functional, Plate turner, maximum dimensions 3200 x 1000 mm. Functional between two through-feed drilling machines. Has not been used extensively. Dedpfx Acsza U Ibsksch

Condition: used, length 700 mm width 500 mm height 105 mm weight 260 kg Dcodpfxey S D Rws Acksh The electro-magnetic clamping plate is in good, ready-to-use condition. Length: 700mm Width: 500mm Height: 105mm Weight: 260kg We have two identical magnetic chucks with the same dimensions. See S9063

Condition: used, Year of construction: 1994, sheet width 3000 mm plate thickness 16 mm distance between columns 3200 mm throat 310 mm stroke 300 mm table width 820 mm table height over floor 1215 mm Number of downholders 12 St. cutting angle 0,5 - 2,5 ° total power requirement 30 kW weight of the machine ca. 19 t Machine was overhauled in 2010 and was modernized with light barrier at table. Machine will be sold with automatic back stop with DRO. including flat belt conveyor Dcsdpfx Aey S D Nmsckoh

Condition: new, plate width 900 mm plate depth 600 mm plate height 55 mm weight 55 kg dimensions of the machine ca. 900 x 600 x 50 mm Clamping plate 900 x 600 x 55 mm If you have not found your desired size, you can also send us an e-mail with the completed PDF form. With this, we can have a plate made for you individually. Please note that (only) these plates are not symmetrical and not parallel. Number of slots: 3 Distance from edge: 140 mm Slot spacing: 270 mm Dcodoy S D Ehepfx Ackeh Slot width: 14 mm Casting quality HT250

Condition: new, plate width 1000 mm plate depth 700 mm plate height 2000 mm Dcedpfx Asy S D D Deckeh weight of the machine ca. 1800 kg required space 1000 x 700 x 2000 mm The GERD WOLFF clamping bracket, with overall dimensions of 1000 x 700 x 2000 millimetres, is equipped with a T-slot plate. If you have not found the size you require, you can also send us an e-mail with the completed PDF form. We can use this to produce a customised panel for you. T-slots - width: 22 and 38 millimetres Panel thickness: 50 millimetres Number of grooves: 8 Surface finished according to DIN 876/III Weight: 1800 kg Material: EN-GJL-250 The cast iron grade EN-GJL-250, characterised by lamellar graphite, is characterised by high thermal conductivity, excellent damping properties and good dimensional stability. This material also combines good machinability with high compressive strength and vibration-damping properties. EN-GJL-250 is particularly suitable for mechanically stressed machine components, as it is also easy to machine and has an outstanding surface finish. Clamping cube - T-slot plates - Plate field

Condition: used, length / mm Dcodpfx Aoy S Dzpsckoh width / mm

Condition: used, plate width 2870 mm plate depth 2000 mm Dsdsy S Dzijpfx Ackoch plate height 300 mm weight 5200 kg flute distance 250 mm 3 identical plate fields available (A2017) LxWxH: 2870 x 2000 x 300mm Area for 3 slab fields: 17.22m² Dimension of the T-slots; 36 x 64 mm - height: 45 mm Weight: KG

Condition: new, plate width 2000 mm plate depth 1500 mm plate height 310 mm weight 2385 kg dimensions of the machine ca. 2000 x 1500 x 300 m Clamping plates - T-slot plates - panel array 2000 x 1500 x 310 mm If you have not found the size you are looking for, you can also send us an e-mail with the completed PDF form. With this we can to have an individually manufactured panel made for you. Number of grooves: 5 edge distance: 135mm groove spacing: 270mm Groove width: 28mm Casting quality HT250 Dcsdey S Dupjpfx Ackoh Flatness less than 0.12 mm Surface machined according to DIN 876/III

Condition: new, plate depth 6000 mm plate width 1100 mm plate height 200 mm weight of the machine ca. 4100 kg required space 6000 x 1100 x 200 mm GERD WOLFF clamping plate 6000 x 1100 x 200 mm If you cannot find your desired size, simply send us an email with the completed PDF form. We can then provide you with a custom plate tailored to your requirements. T-slots - width: 42 x 22 mm Dcjdpey S Dnvofx Ackeh T-slot spacing: 200 mm Number of slots: 5 Edge distance: 125 mm Casting quality HT250 Flatness less than 0.12 mm Surface machined according to DIN 876/III Keywords: Clamping plate, Machine table, Workpiece clamping, Fixing holes, Clamping system, Tool clamping surface, Clamping device, T-slot plate, Precision plate, Modular clamping plate, Hole system, Mounting plate, Workpiece fixation, CNC machine clamping plate, Machine base

Condition: used, functionality: fully functional, Year of construction: 2025, Weber Vibratory Plate CF 1 HD-III — Year of manufacture 2025 Used, from the professional rental fleet of Kurt König Baumaschinen GmbH, Einbeck, Germany. Condition & Notes: - Condition: Used, ex-rental, regularly serviced - Functionality: Fully operational - Product photos to follow — please contact us for current images - On-site inspection in 37574 Einbeck available by appointment Dodpfx Asy A Hbmsckoch Price EUR 1,300 plus VAT | EXW Einbeck | Delivery upon request

Condition: good (used), Year of construction: 2000, Technical specifications: Working width: 6100 mm Max. bending capacity: 10.0 mm Max. bending angle: 8.0 mm Diameter of upper roller: 470 mm Diameter of side rollers: 250 mm Hardened rollers Conical bending unit through angled positioning of the two side rollers Mobile control panel Hydraulic folding bearings Motor power: 31 kW Dcodpfjzbmw Djx Ackjh Dimensions (length x width x height): approx. 8000 x 3200 x 2900 mm Weight: approx. 30 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: used, overall weight: 23,000 kg, plate height: 600 mm, plate length: 7,000 mm, plate width: 3,000 mm, 2 pieces of clamping plates with T-slot. Plates are painted. Surface is sandblasted and preserved. Dedpfx Aozbcrwecksch

Condition: new, Year of construction: 1988, For sale: mobile industrial fan from the former GDR, manufactured by VEB MAW Armaturenwerk Wehrsorf (Zittau), powered by a 0.75 kW motor from the USSR. Sturdy steel construction on castors – ideal for dust extraction, air supply, local ventilation, or machine cooling. Technical data: • Airflow: 1020 m³/h • Total pressure: 834 N/m² • Static pressure: 681 N/m² • Density: 1.20 kg/m³ • Speed: 2800 rpm • Power consumption: 0.5 kW • Max operating temperature: 35°C • Year of manufacture: not fully specified – likely 1980–1990 Dsdpfeud R Iisx Ackech Motor: • Type: АИР71А2УЗ • Power: 0.75 kW • Speed: 2820 rpm • Voltage: 220/380 V • Protection class: IP54 • Manufactured in the USSR Advantages: • Compact and mobile design • Operational drive, ready for use • Suitable for workshops, paint shops, ventilation, burners