Tapping and cutting set metric, 110 pieces (GERE-00064). Tungsten / tungsten steel Tapping holders: 3-12mm 5-20mm Tapping holder: 1.6 6mm Wringers for cushions: 1 inch 1.1/2 inchesCutting cushions 1 inch and 1.1/2 inch outside diameterTaps (set of 2): 2mm x 0.4 3mm x 0.5 4mm x 0.7 5mm x 0.8 6mm x 0.75 6mm x 1.0 7mm x 0.75 7mm x 1.0 8mm x 0.75 8mm x 1.0 8mm x 1.25 9mm x 0.75 9mm x 1.0 9mm x 1.25 10mm x 0.75 10mm x 1.0 10mm x 1.25 10mm x 1.5 11mm x 0.75 11mm x 1.0 11mm x 1.25 11mm x 1.5 12mm x 0,...
connected load frequency 230 V
output 0,625 KW
sheet thickness - max. 1,8 mm
battery 2 x 18Volt / 2.0AH V
Bogygtv83i
weight 2,7 kg
range L-W-H 430 x 280 x 100 mm
Sanding belt set, 3 pieces (LUCH-00278) Suitable for :LUCH-00092 60, 80 and 120 Grit 10 x 330 mm Sanding belt 10 x 330 mm, 3 pieces. Find here the right sanding belts for your belt sander. A belt sander is mainly used for removing large amounts of material on often large surfaces. Around the belt sander is an oval belt. This belt moves like a caterpillar over the surface. For the optimal result it is advised to let the belt sander rest on the surface. The machine should always be used with the s...
Number of bars max.: 9
cutting capacity with 1 bar max.: 20 mm
weight of the machine ca.: 6,0 t
Cuts, bends and picks steel rods. Plant is applicable for use in concrete formwork, reinforce concrete, etc.
Plant is specially has been constructed for this type of application area.
further technical details:
- capacity / cutting speed: according material 20m/min feed
- cutting unit incl. feed
- bending unit
equipment:
- bridge with robot unit for gripping of steel rods
- SPS controlled robot arm
...
Sander (pneumatic), sanding machine on air, compressor sanding machine, air pressure sanding machine (LUCH-00092). Speed = 16,000rpm Sanding belt = 10 x 330mm Air connection = 1/4'' Hose connection = 3/8'' Average air consumption = 170 L/min Working pressure = 6,3 bar Includes 3 sanding belts grit 60 + 80+ 120. Loose sanding belts are available from us (LUCH-00278) AIR TOOLSAir tools, also called pneumatic tools, are often used in combination with a compressor. The compressor can be connected to...
For sale is a propeller agitator from Erwin Stelzer Warburg. It is the model 8M 63G.D2.
Data on the agitator:
RpM: 225
V: 220 / 380
kW: 1,5
Bp77isqfg0
shaft length: 500mm
blade diameter: 240mm
Connection: DN200
For further information see type plate
The Machineseeker Trust Seal gives buyers the opportunity to see, at a glance, whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Check the address of the dealer
Validation of Bank connection
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal in your advertisements on Machineseeker. In this way, you signal to every potential buyer the seriousness of your company, checked by an independent body. This creates buyer confidence and increases the probability of successfully selling machines. In addition, you have the option of including the Machineseeker Trust Seal on your homepage and in business letters.