High pressure pump unit 300bar 24l/min

Hammelmann HDP 47

Condition: used, Year of construction: 2014, power capacity 3 kW feed pressure 7 bar liter capacity / l weight 286 kg Chicago Pneumatic CPVR15 CE screw compressor - Year of manufacture 2014 Nwodpfxjh A Sfdj Ag Ioc The CPVR15 CE impresses with its robust design, long service life and low operating costs. Whether in workshops, workshops or industrial applications - this compressor reliably supplies you with the compressed air you need. Drive power: 3 kW Delivery pressure: 7 bar Air output: up to 58 CFM (approx. 1,640 l/min) at 7 bar Weight: 286 kg Dimensions: approx. 965 mm (L) × 620 mm (W) × 1,040 mm (H) Operating noise: approx. 50-58 dB(A) Voltage/frequency: 415 V / 50 Hz Application: Workshops, craft businesses, industrial applications with medium compressed air requirements Included in delivery: 1x compressor - Chicago Pneumatic CPVR15 CE 1x refrigeration dryer - OMI ESD 108 - 0.70kW 1x Beko Öwamat 2 - oil-water separator Technical data was taken from publicly available sources

Condition: excellent (used), Year of construction: 2007, operating hours: 3,114 h, functionality: fully functional, total width: 2,500 mm, total length: 7,100 mm, total height: 2,800 mm, pressure: 1,120 bar, operating pressure: 1,120 bar, fuel: diesel, overall weight: 12,000 kg, rotational speed (max.): 2,100 rpm, water tank capacity: 1,600 l, empty load weight: 12,000 kg, power: 286 kW (388.85 HP), year of last overhaul: 2024, water pressure: 1,120 bar, pump capacity: 111 l/min, Equipment: rotational speed infinitely variable, type plate available, High-pressure pump unit Hammelmann HDP 233 in BDF / WAB container. Similar but not Kamat, Uraca, or Woma. Pump type: Hammelmann HDP 233 PRESSURE STAGE 1: Operating pressure: 1120 bar Flow rate: 111 l/min. PRESSURE STAGE 2: Operating pressure: 920 bar Flow rate: 131 l/min. Selector/diverter valve with manual switch installed. Drive speed: 2100 rpm Plunger: d30 mm Drive power: 230 kW With 286 kW Deutz BF 6M 1015 C diesel engine With workshop and changing room. Dimensions (LxWxH): approx. 6000x2500x2800 mm Weight: approx. 12,000 kg Year of manufacture: 2007 (HD pump from 2005) Operating hours: 3114 Nwedpfx Agowyw Dts Iec Condition: New plunger seals, fuel and oil filters. The high-pressure pump is in very good used condition.

Condition: good (used), Year of construction: 2009, operating hours: 4,500 h, I have 5 Kaeser HB 950 blowers for sale with 110 kW and 132 kW motors. Nwsdpfxev Rmkxe Ag Iec

Condition: new, Year of construction: 2025, Genie GS3246 E-Drive electric scissor lift, new, used - demonstration machines available Nwsdpfx Agsrqfnfe Ioc

Condition: new, functionality: fully functional, Fervi T047/400VDA Gear-Driven Milling and Drilling Machine with Tapping 400V 1.5kW BRAND NEW “CE” CERTIFIED Promo price – single unit available while stocks last. The machine can be used for: Milling Drilling Tapping Drilling capacity in cast iron (with pilot hole): ø 40 mm Max drilling capacity in steel (with pilot hole): ø 32 mm Milling capacity with indexable cutter: ø 80 mm Milling capacity: ø 25 mm Tapping capacity: Ø 22 mm Taper: MT 4 Quill stroke: 130 mm Quill diameter: ø 76 mm Column diameter: ø 115 mm Head tilt: ± 60° Spindle speed: (12) 75 ÷ 3200 rpm Three-phase motor: 400 V 50 Hz 1.1 – 1.5 kW Nwodpfxeg Npiwj Ag Isc Table dimensions: 585 x 190 mm T-slot: 12 mm Base dimensions: 648 x 412 mm Overall dimensions: 740 x 790 x 1960h mm Weight: 390 kg.

Year of construction: 2012, condition: used, fuel type: electric, weight max. in kg 2500 kg stroke 3700 mm fork length 900 mm Super elastic battery Baujahr 2013 construction height 2630 mm weight of the machine ca. t Nwodpfx Aefibh Rsg Ioc Duplex / Free lift

Condition: used, mileage: 69 km, first registration: 08/2023, fuel type: diesel, axle configuration: > 3 axles, gearing type: automatic, emission class: euro6, loading space volume: 10 m³, Year of construction: 2023, operating hours: 8 h, machine/vehicle number: EXVAC SE.10, RIVARD suction excavator EXVAC SE.10 !! IMMEDIATELY AVAILABLE !!! RIVARD industrial turbine Detachable suction hose inlet 10.5 m³ container volume 4-joint boom Hydrostatic drive Filter cleaning Rear / front fall protection Camera route monitoring Nwjdpfx Agsg Dl Ars Ijc

Condition: used, Pillar drilling machines Nwedpfx Agob N Ezrs Iec

Condition: new, The Sinus 330/1500 D is a top-tier Conventional Horizontal Lathe within the Engine Lathes category, renowned for its robust design and superior performance. Built on a solid one-piece cast machine bed, this lathe excels in heavy-duty tasks with a maximum turning diameter of 660 mm and a workpiece length capacity of 1,500 mm, making it ideal for machining large parts and flanges. The integrated removable bridge facilitates the machining of workpieces with diameters up to 1,035 mm, while features such as its manual multi-disc clutch, rapid traverse on two axes, and taper turning attachment enhance versatility and efficiency. Safety is prioritized with well-designed functions and overload protection for the feed shaft and leadscrew. As part of your operational setup, the Sinus 330/1500 D includes essential standard equipment like a reliable 3-axis position indicator, a high-quality 3-jaw chuck, and a comprehensive toolbox. With its precision, durability, and range of functionalities, this KNUTH lathe is the perfect choice for your machining needs. Order online today to elevate your machining capabilities with this exceptional Engine Lathe. Nwjdpfx Asp Atuzsg Isc

Condition: good (used), Year of construction: 1962, High speed radial drilling machine, radial drilling machine, drilling machine, boom drilling machine, high speed radial drilling machine -Clamping table: 400 x 1100 mm -Projection: 930 mm -Taper mount: MK4 -Engine power: 1.35/1.8 kW Nodpfxeirax Us Ag Ijwc -Speed: 41-1700 rpm -Columns: Ø 200 mm -Spindle stroke: 125 mm -Thread cutting device: YES -Feed: 0.075 - 0.3 mm/rev -Dimensions: 1800/1235/H2240 mm -Weight: 1500kg