Used Pressure Former for sale (14,445)

Condition: good (used), Mixing Tank, Mixer, Pressure Vessel, Heating Jacket, Chemical Industry, Used Equipment Design: Cylindrical tank with shallow dished bottom and top, equipped with an agitator. The tank bottom and shell are double-walled with a heating jacket. The tank lid is removable with a flanged bolt connection. The lid has a cleaning opening. Material Quality: Carbon steel with painted surface. Manufacturer: Robert Hinkel & Co Cedpfxstrdyrs Agcsrk Type: 9601 Volume: 200L Operating Pressure: 3 bar Electrical Data: 380V; 0.75kW; 2.0A

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit Csdpfx Aofz Dvvegcsrk • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel Cedpfx Agjfz Ax Socjrk • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions Cedpfx Aoflpmqegcjrk The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel Credjfzrapepfx Agcsk • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible Crjdpsfz A D Nsfx Agcek The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: used, Marvel Townsend StorkDMM50 meat bone separator to produce best quality low pressure deboned meat when used in conjunction with a Baader or SEPAmatic. This machine has come direct from a closed meat factory in Scotland. Almost impossible to find these machines on the used market. Cedpfjlkc I Rjx Agcerk

Condition: used, tank capacity: 5,400 l, GENERAL Equipment: Crane lugs Design: suspended Remarks: Support ring made of Fe; the half-pipe coil is not shown in the tank drawing Speed: 450 rpm Internal diameter: 1,800 mm Explosion protection: Motor is explosion-proof (compliance with the applicable ATEX guidelines under local conditions must be checked) Total height: 3,700 mm Heating/Cooling: available Power: 3.6 kW Max. overpressure: 6.0 bar Shaft seal: Mechanical seal with thermosiphon vessel Agitator: Propeller Base shape: Ring Location: Bremen Technical documentation: Drawing, acceptance certificate Cylinder temperature control: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 5,400 liters Cylinder wall thickness: 6 mm Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 1,690 mm Previous application: Chemistry TANK Max. permissible operating temperature: 200 °C HEATING/COOLING JACKET Bottom temperature control: Half-pipe coil EQUIPMENT Manway/Dome: on top head (DN 500) Outlet: Flange DN100 Note: minor residues MATERIAL SPECIFICATION Crjdpfx Ajxqa Dnegcsk Temperature control system material: V2A 1.4541 (AISI304) AGITATOR 1 Agitator manufacturer: Ekato Voltage: 400/690 volts Bottom bearing: TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 8 mm Agitator arrangement: eccentric in the top head Agitator documentation: Extensive agitator documentation available Top head wall thickness: 16 mm

Condition: used, tank capacity: 568 l, GENERAL Equipment: control cabinet (without guarantee) Design: upright Crsdpfx Aoxqa Dhjgcek External diameter: 900 mm Internal diameter: 810 mm Total height: 1,830 mm Heating/Cooling: available Max. permissible operating temperature: 134 °C Max. permissible operating overpressure: 2.0 bar Max. overpressure: 2.0 bar Upper cover: removable/hinged upper cover Agitator: agitator flange Base design: mobile on castors Location: Bremen Cylinder tempering: double jacket Nameplate: Vacuum: 1.0 bar Volume: 568 liters Double jacket volume: 108.0 liters Product-contacting material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 850 mm Last application: pharmaceutical VESSEL Max. permissible operating temperature: 134 °C Number of feet: 4 pcs HEATING/COOLING JACKET Bottom tempering: double jacket EQUIPMENT Note: scratches inside Outlet: 23 mm MATERIAL SPECIFICATION External surface: polished Internal surface: ground Temper system material: V2A 1.4301 (AISI304) Foot material: stainless steel AGITATOR 1 Agitator arrangement: eccentric in upper cover

Condition: used, tank capacity: 5,500 l, GENERAL Equipment: Crane lugs Design: vertical Remarks: Dents in the insulation jacket possible; the manufacturing and documentation drawings are available from the manufacturer and can be purchased separately there Speed: 429 rpm Outer diameter: 1,890 mm Inner diameter: 1,680 mm Total height: 3,500 mm Cedpfxsxqazae Agcsrk Heating/cooling: available Insulation: available Power: 2.2 kW Max. permitted operating temperature: 140 °C Max. permitted operating overpressure: 2.5 bar Max. overpressure: 2.5 bar Agitator: Propeller Base type: Height-adjustable feet Location: Bremen Cylinder temperature control: Double jacket Nameplate: Vacuum: 1.0 bar Volume: 5,500 liters Double jacket volume: 154.0 liters Double jacket material: V2A 1.4301 (AISI 304) Product-contact material: V4A 1.4571 (AISI 316) Condition: used Last application: brine TANK Max. permitted operating temperature: 140 °C Number of feet: 3 pcs HEATING/COOLING JACKET Max. permitted vacuum: 1.0 bar Base temperature control: Double jacket INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Manhole / dome: on top head (DN 400) Note: slight residues present, outlet nozzle cut off Outlet: 38 mm MATERIAL SPECIFICATION Feet material: stainless steel AGITATOR 1 Agitator manufacturer: PRG Voltage: 230/400 Volt Agitator arrangement: bottom-mounted

Condition: used, tank capacity: 120 l, GENERAL Design: vertical Notes: Mobile frame made of V2A; lid clamping ring is missing External diameter: 500 mm Internal diameter: 400 mm Total height: 1,200 mm Heating/cooling: available Max. permissible operating temperature: 15 °C Max. permissible operating overpressure: 1.0 bar Codexqay Nopfx Agcsrk Max. overpressure: 1.5 bar Top cover: Top removable / can be folded open Agitator: Magnetic stirrer Mounting style: mobile frame Location: Bremen Cylinder tempering: Double jacket Nameplate: Volume: 120 liters Double jacket volume: 16.0 liters Double jacket material: V2A 1.4301 (AISI304) Product-contact material: V4A 1.4435 (AISI316) Condition: used Cylindrical height: 750 mm Previous application: Pharmaceuticals VESSEL Max. permissible operating temperature: 130 °C EQUIPMENT Outlet: 35 mm MATERIAL PROPERTIES Outer surface: ground Inner surface: polished AGITATOR 1 Agitator configuration: Bottom-mounted Agitator equipment: Motor/gear unit for the magnetic stirrer is not included

Condition: used, tank capacity: 313 l, GENERAL Construction type: upright Remarks: Chassis made of V2A stainless steel (the control cabinet boxes visible in the photos are empty); minor dents inside the tanks; top covers made of V2A (suspensions and fastening screws for the top covers are missing) External diameter: 730 mm Internal diameter: 620 mm Total height: 1,600 mm Heating/cooling: available Insulation: available Max. permissible operating temperature: 143 °C Max. permissible operating overpressure: 3.0 bar Max. overpressure: 3.0 bar Top cover: removable / hinged Agitator: agitator flange Stand type: mobile frame Location: Bremen Cylinder temperature control: double jacket Nameplate: Volume: 313 liters Double jacket volume: 15.0 liters Product-contacting material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 830 mm Previous application: pharmaceuticals TANK Crjdpfsxqayvex Agcjk Max. permissible operating temperature: 143 °C HEATING/COOLING JACKET Bottom temperature control: double jacket INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Note: Discharge outlet cut off, metallic discolorations inside Discharge: 45 mm MATERIAL SPECIFICATION Top cover material: AISI304 (V2A) 1.4301 Temperature control system material: V2A 1.4301 (AISI304) AGITATOR 1 Baffle plates: Agitator arrangement: bottom mounted Agitator equipment: One tank is still equipped with a magnetic stirrer; motor/gear units are no longer present

Condition: used, tank capacity: 3,860 l, GENERAL INFORMATION Equipment: Crane lugs Design: Suspended Notes: Support ring, Fe; manhole cover incomplete (see photos) Rotation speed: 61 rpm External diameter: 2,090 mm Internal diameter: 1,800 mm Explosion protection: Motor is explosion-proof (compliance with current ATEX directives under local conditions must be verified) Total height: 3,050 mm Heating/Cooling: available Insulation: available Power: 4 kW Max. permitted operating temperature: 200 °C Max. permitted operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Agitator: Beam agitator Stand/base type: Ring Location: Bremen Technical documentation: Drawing, various documents Cylinder temperature control: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 3,860 litres Double jacket volume: 136.0 litres Cylinder wall thickness: 6 mm Product contact material: V4A 1.4435 (AISI316) Condition: used Last application: pharmaceutical chemistry VESSEL Max. permitted operating temperature: 200 °C HEATING/COOLING JACKET Max. permitted operating vacuum: 1.0 bar Bottom temperature control: Half-pipe coil Cedpfx Aoxqaxlegcerk INSULATION Insulation jacket: riveted Insulation jacket material: aluminium EQUIPMENT Manway / Dome: in upper head (DN 600) Outlet: available Note: Dents in insulation jacket, manway cover plated MATERIAL SPECIFICATION Temperature control system material: AISI 304 (V2A) 1.4306 AGITATOR 1 Voltage: 400/690 Volt TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 5.17 mm Agitator arrangement: centrally positioned in upper head Agitator equipment: Gearbox housing slightly damaged in one area (see photos) Upper head wall thickness: 8.14 mm

Condition: used, tank capacity: 2,500 l, GENERAL Equipment: crane lugs Design: suspended Notes: 4 support brackets made from V2A; manhole cover fastening bolts incomplete; 1 former connection on the top head was welded shut by the previous operator Internal diameter: 1,390 mm Overall height: 3,000 mm Heating/cooling: available Max. permissible operating temperature: 190 °C Max. permissible operating overpressure: 3.0 bar Max. overpressure: 1.0 bar Agitator: beam agitator Agitator mounting: agitator flange Support type: brackets Location: Bremen Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 2,500 liters Jacket volume: 35.0 liters Cylinder wall thickness: 5 mm Product-contacting material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 1,500 mm Last previous use: chemicals VESSEL Max. permissible operating temperature: 190 °C Csdpfx Aexqaw Iegcsrk HEATING/COOLING JACKET Bottom temperature control: half-pipe coil EQUIPMENT Manhole / dome: on top head (DN 500) Discharge: flange DN50 Note: slight adhesions, motor/gearbox missing MATERIAL QUALITY Temperature control system material: V2A 1.4541 (AISI304) AGITATOR 2 Agitator arrangement: lateral on cylinder AGITATOR 1 Agitator manufacturer: Ekato Baffle: TECHNICAL DATA / DIMENSIONS Base wall thickness: 4.6 mm Agitator arrangement: eccentric in top head

Condition: used, tank capacity: 5,000 l, GENERAL INFORMATION Crodpoxqawujfx Agcok Equipment: Ball valve Design: Suspended Remarks: Top cover made from V2A (1.4301); 4 support feet made of steel; minor material wear inside the vessel Internal diameter: 1,880 mm Total height: 3,550 mm Heating/Cooling: present Max. permissible operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Top cover: Removable / hinged top cover Agitator type: Beam agitator Stand type: Feet Location: Bremen Cylinder temperature control: Half-pipe coil Nameplate: Volume: 5,000 liters Cylinder wall thickness: 10.2 mm Product-contacting material: V4A 1.4429 (AISI316) Condition: Used Cylindrical height: 1,580 mm Last application: Chemical industry HEATING/COOLING JACKET Bottom temperature control: Half-pipe coil EQUIPMENT Manway / Dome: On the top cover (Ø 450) Outlet: DN40 DIN 11851 Note: Light residues, motor/gearbox missing MATERIAL SPECIFICATION Top cover material: AISI304 (V2A) 1.4301 Temperature control system material: V2A 1.4301 (AISI304) Flange material: Steel AGITATOR 1 Agitator manufacturer: Fluid TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 8.3 mm Agitator arrangement: Centered in top cover Top cover wall thickness: 4.5 mm

Condition: used, Year of construction: 2007, tank capacity: 1,700 l, GENERAL Equipment: Spray head Design: upright Year of construction: 2007 Outer diameter: 1,400 mm Inner diameter: 1,170 mm Total height: 3,250 mm Heating/Cooling: available Insulation: available Max. permissible operating temperature: 100 °C Max. permissible operating overpressure: 8.0 bar Max. overpressure: 4.0 bar Top head: removable / hinged top head Agitator: bucket agitator Agitator shaft: agitator flange Support design: height-adjustable feet Location: Bremen Technical documentation: drawing, various documents Cylinder temperature control: double jacket Nameplate: Vacuum: 1.0 bar Volume: 1,700 liters Double jacket volume: 230.0 liters Product-contacting material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 1,170 mm Last application: pharmaceutical VESSEL Max. permissible operating temperature: 100 °C Number of feet: 3 pcs HEATING/COOLING JACKET Bottom temperature control: double jacket INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel Csdpfoxqauaox Agcerk EQUIPMENT Manhole/Dome: on top head (DN 500) MATERIAL SPECIFICATION Exterior surface: high gloss Temperature control system material: V2A 1.4301 (AISI304) Feet material: stainless steel AGITATOR 2 Agitator position: side-mounted on cylinder AGITATOR 1 Agitator position: off-center in top head Agitator equipment: motor/gearbox unit no longer present

Condition: used, tank capacity: 225 l, GENERAL INFORMATION Features: crane lugs Design: vertical Notes: 4-legged frame made of V2A; handhole diameter approx. 155 mm Crjdjxqatvjpfx Agcsk Speed: 156 - 838 rpm Outer diameter: 800 mm Inner diameter: 590 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX regulations under local conditions must be verified) Total height: 2,400 mm Heating/cooling: available Insulation: available Power: 0.75 kW Max. permissible operating temperature: 95 °C Max. permissible operating overpressure: 4.0 bar Max. overpressure: 1.0 bar Top cover: removable/hinged top cover Shaft seal: mechanical seal with thermosiphon vessel Agitator: propeller Base design: frame Location: Bremen Cylinder temperature control: double jacket Nameplate: Vacuum: 1.0 bar Volume: 225 liters Double jacket volume: 60.0 liters Product-contact material: V4A 1.4571 (AISI316) Condition: used Last application: chemical industry VESSEL Max. permissible operating temperature: 95 °C HEATING/COOLING JACKET Bottom temperature control: double jacket INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Manhole: handhole Note: slight adhesions Outlet: 25 mm MATERIAL SPECIFICATIONS Temperature control system material: V2A 1.4301 (AISI304) AGITATOR 1 Agitator manufacturer: Stelzer Voltage: 220/380 Volt Interference suppressor: Agitator arrangement: centrally in top cover Agitator features: speed adjustable via handwheel

Condition: used, tank capacity: 1,000 l, GENERAL Equipment: Spray head Design: vertical External diameter: 1,300 mm Internal diameter: 1,100 mm Total height: 2,300 mm Heating/Cooling: available Insulation: available Power: 1.1 kW Max. permissible operating temperature: 150 °C Max. permissible operating overpressure: 6.0 bar Max. overpressure: 4.0 bar Agitator: Magnetic stirrer Support type: Legs Location: Bremen Technical documentation: Drawings, TÜV papers, various documents Cylinder temperature control: Double jacket Name plate: Vacuum: 1.0 bar Volume: 1,000 liters Double jacket volume: 72.0 liters Cylinder wall thickness: 10 mm Cedjxqar Sepfx Agcork Wetted material: V4A 1.4401/04 (AISI 316) Condition: used Cylindrical height: 1,000 mm Last application: Pharmaceuticals TANK Max. permissible operating temperature: 150 °C Number of legs: 3 pcs HEATING/COOLING JACKET Max. permissible operating vacuum: 1.0 bar Bottom temperature control: Double jacket INSULATION Insulation jacket: hermetically welded Insulation material: Mineral wool Insulation jacket material: Stainless steel EQUIPMENT Manhole/Dome: on top (DN 400) Outlet: available Outlet: 50 mm MATERIAL SPECIFICATION Temperering system material: V4A 1.4571 (AISI 316) Legs material: Stainless steel AGITATOR 1 Agitator manufacturer: Aprotec Voltage: 220/380 Volt TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6.6 mm Agitator arrangement: Bottom-mounted Agitator documentation: Various technical documents for the agitator available Top wall thickness: 6.3 mm

Condition: used, tank capacity: 1,344 l, GENERAL Equipment: Spray head, crane lugs Design: vertical Remarks: The container was modified at the end of 2012 (nozzle welding and shortening of the support legs; TÜV inspection certificate available; the drawing attached in the documentation is the original drawing; 1 dent in the insulation jacket) Speed: 440 / 940 RPM Outer diameter: 1,350 mm Inner diameter: 1,180 mm Total height: 2,400 mm Heating/Cooling: present Insulation: present Power: 0.33 / 1.85 kW Max. permissible operating temperature: 150 °C Max. permissible operating overpressure: 2.0 bar Max. overpressure: 3.0 bar Mechanical seal: Mechanical seal with thermosyphon vessel Agitator: Propeller Support: Height-adjustable feet Location: Bremen Technical documentation: Drawing, TÜV certificates Cylinder tempering: Double jacket Nameplate: Vacuum: 1.0 bar Volume: 1,344 liters Double jacket volume: 76.0 liters Crsdsxqaqhspfx Agcjk Cylinder wall thickness: 8 mm Product contact material: V4A 1.4571 (AISI316) Condition: Used Cylindrical height: 750 mm Last application: Pharmaceutical TANK Max. permissible operating temperature: 150 °C Number of feet: 3 pcs HEATING / COOLING JACKET Bottom tempering: Double jacket INSULATION Insulation jacket: hermetically welded Insulation jacket material: Stainless steel EQUIPMENT Manhole / dome: in the top head (DN 500) Outlet: DN80 DIN 11851 MATERIAL PROPERTIES Material of tempering system: V2A 1.4301 (AISI304) Foot material: Stainless steel AGITATOR 1 Agitator manufacturer: PRG Voltage: 380 V TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6.8 mm Agitator arrangement: Eccentric in the top head Top head wall thickness: 6 mm

Condition: used, tank capacity: 1,100 l, GENERAL Equipment: Spray head Design: vertical Remarks: Original drawing available; vessel was modified at the end of 1996 (test report available, no modification drawing); 1 welded bracket inside the vessel Speed: 705 rpm Outer diameter: 1,400 mm Inner diameter: 1,200 mm Total height: 2,450 mm Heating/Cooling: available Insulation: available Power: 1.5 kW Max. permissible operating temperature: 150 °C Max. permissible operating overpressure: 2.5 bar Max. overpressure: 2.5 bar Top head: removable/hinged top Mechanical seal: mechanical seal with thermal siphon vessel Agitator: propeller Base type: feet Location: Bremen Technical documents: drawing, TÜV certificates Cylinder temperature control: double jacket Nameplate: Credpfx Ajxqaqbsgcsk Vacuum: 1.0 bar Volume: 1,100 litres Double jacket volume: 192.0 litres Wall thickness cylinder: 8 mm Product-contact material: V4A 1.4571 (AISI 316) Condition: used Cylindrical height: 840 mm Last application: Pharmaceuticals VESSEL Max. permissible operating temperature: 150 °C Number of feet: 3 pcs HEATING/COOLING JACKET Bottom head temperature control: double jacket INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Manway / dome: on top head (DN 400) Outlet: DN80 DIN 11851 MATERIAL SPECIFICATION Temperature control system material: V4A 1.4571 (AISI 316) Feet material: stainless steel AGITATOR 1 Agitator manufacturer: PRG Voltage: 230/400 Volt TECHNICAL DATA / DIMENSIONS Head wall thickness: 8 mm Agitator arrangement: eccentric in the top head

Condition: used, Year of construction: 2010, tank capacity: 1,410 l, GENERAL Equipment: spray head, crane lugs Design: suspended Year of manufacture: 2010 Notes: 4 stainless steel support feet; total height is estimated; 1 heating connection cut off; slight metallic discoloration inside the tank; 1 external dirt protection collar over the feet (diameter approx. 1,740 mm) Speed: 960 rpm Outer diameter: 1,450 mm Inner diameter: 1,300 mm Total height: 2,250 mm Heating/Cooling: present Insulation: present Power: 3 kW Max. permissible operating temperature: 150 °C Max. permissible operating pressure: 4.0 bar Max. overpressure: 3.0 bar Agitator: propeller Support type: feet Location: Bremen Technical documentation: drawing, TÜV papers, various documents, CE marking and declaration of conformity, operating manual Jacket temperature control: double jacket Nameplate: Vacuum: 1.0 bar Volume: 1,410 liters Double jacket volume: 93.0 liters Cylinder wall thickness: 8.4 mm Codpfx Aexqap Djgcjrk Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 700 mm Last intended use: cosmetics VESSEL Max. permissible operating temperature: 150 °C HEATING/COOLING JACKET Max. permissible operating vacuum: 1.0 bar Bottom temperature control: double jacket INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Manhole / dome: on the top cover (DN 500) Outlet: 65 mm MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) AGITATOR 1 Agitator manufacturer: PRG Voltage: 230/400 volt TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6.9 mm Agitator arrangement: bottom-mounted Top wall thickness: 6.1 mm

Condition: used, Year of construction: 2008, tank capacity: 2,900 l, GENERAL Equipment: Lifting lugs Construction type: Suspended Year of manufacture: 2008 Remarks: 4 support feet made of stainless steel; total height is estimated; 1 heating connection cut off; slight metallic discoloration inside the tank Speed: 960 rpm Outer diameter: 1,800 mm Inner diameter: 1,650 mm Total height: 2,600 mm Cjdpfx Asxqapwjgcork Heating/cooling: available Insulation: available Power: 4 kW Max. permissible operating temperature: 150 °C Max. permissible operating overpressure: 4.0 bar Max. overpressure: 3.0 bar Agitator: Propeller Support type: Feet Location: Bremen Technical documentation: Drawing, TÜV certificates, various documents, CE marking and declaration of conformity Cylinder temperature control: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 2,900 liters Double-jacket volume: 110.0 liters Cylinder wall thickness: 4.8 mm Product-contacting material: V4A 1.4571 (AISI316) Condition: Used Cylindrical height: 900 mm Last application: Cosmetics TANK Max. permissible operating temperature: 150 °C HEATING/COOLING JACKET Max. permissible operating vacuum: 1.0 bar Bottom temperature control: Half-pipe coil INSULATION Insulation jacket: Hermetically welded Insulation jacket material: Stainless steel EQUIPMENT Manhole / dome: on the top head (DN 500) Outlet: 65 mm MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) AGITATOR 1 Agitator manufacturer: PRG Voltage: 230/400 Volt TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 4.5 mm Agitator arrangement: Bottom entry Agitator documentation: Technical documentation for the agitator available Top head wall thickness: 6.7 mm

Condition: used, Year of construction: 2008, tank capacity: 1,410 l, GENERAL Equipment: Spray head, crane lugs Design: suspended Year of manufacture: 2008 Remarks: 4 stainless steel support legs; overall height is estimated; slight metallic discolorations inside the tank Speed: 960 RPM Outer diameter: 1,450 mm Inner diameter: 1,300 mm Overall height: 2,400 mm Heating/Cooling: available Insulation: available Power: 3 kW Max. permissible operating temperature: 150 °C Max. permissible operating overpressure: 4.0 bar Max. overpressure: 3.0 bar Agitator: propeller Base type: support legs Location: Bremen Technical documentation: drawing, TÜV certificates, various documents, CE marking and declaration of conformity, operating manual Shell tempering: double jacket Nameplate: Vacuum: 1.0 bar Volume: 1,410 liters Double jacket volume: 93.0 liters Cylinder wall thickness: 8.4 mm Double jacket material: V2A 1.4301 (AISI304) Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 700 mm Last application: cosmetics TANK Max. permissible operating temperature: 150 °C HEATING/COOLING JACKET Max. permissible operating vacuum: 1.0 bar Bottom tempering: double jacket INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Manway/dome: on top (DN 500) Discharge: 65 mm Codexqapqepfx Agcerk AGITATOR 1 Agitator manufacturer: PRG Voltage: 230/400 V TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6.9 mm Agitator arrangement: bottom-mounted Agitator equipment: technical documentation for the agitator available Top wall thickness: 6.1 mm

Condition: used, Year of construction: 2018, tank capacity: 500 l, GENERAL Equipment: Spray head, crane lugs Design: Hanging Year of manufacture: 2018 Remarks: Comprehensive documentation according to pharmaceutical industry standards included in delivery; unit was built for a global pharmaceutical company but was never commissioned at that site; handhole with sight glass diameter: 285mm Speed: 408 RPM External diameter: 960 mm Internal diameter: 780 mm Heating/Cooling: available Insulation: available Power: 0.37 kW Crjdpfexqanmex Agcok Max. permissible operating temperature: 150 °C Max. permissible operating overpressure: 10.0 bar Max. overpressure: 6.0 bar Top head: bolted lid Agitator: Magnetic agitator Support type: Lug feet Location: Bremen Technical documentation: Drawing, TÜV certificates, acceptance certificate, CE marking and declaration of conformity, operating manual Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 500 liters Double jacket volume: 88.0 liters Cylinder wall thickness: 8.9 mm Product-contacting material: V4A 1.4539 (AISI316) Condition: unused Cylindrical height: 1,015 mm VESSEL Max. permissible operating temperature: 150 °C Specific gravity of medium: 1.2 (to/m³) Bottom head: torispherical bottom HEATING/COOLING JACKET Max. permissible operating vacuum: 1.0 bar INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel Insulation thickness: 50 mm EQUIPMENT Manhole / Dome: Handhole Outlet: available AGITATOR 1 Agitator manufacturer: Zeta GmbH Voltage: 230/400 volts TECHNICAL DATA / DIMENSIONS Bottom head wall thickness: 6.1 mm Agitator positioning: bottom entry Agitator features: Magnetic agitator, presumably speed-controlled (external controller not included) in the range of 75 - 500 RPM Top head wall thickness: 4.3 mm

Condition: used, Year of construction: 2007, tank capacity: 1,880 l, GENERAL Equipment: Spray head, crane lugs, control cabinet (no guarantee) Design: vertical Year of manufacture: 2007 Remarks: 1 pump (brand GRUNDFOS) is included in the scope of delivery; 1 control cabinet (previously operated with 3 of these tanks by the former owner) can be purchased at extra cost (see photos) Speed: 329 RPM External diameter: 1,520 mm Internal diameter: 1,250 mm Total height: 2,600 mm Heating/Cooling: present Insulation: present Power: 0.75 kW Cjdpfxsxqango Agcjrk Max. permissible operating temperature: 150 °C Max. permissible operating overpressure: 6.0 bar Max. overpressure: 4.0 bar Agitator: Magnetic stirrer Stand design: Height-adjustable feet Location: Bremen Technical documentation: Drawings, various documents, CE marking and declaration of conformity Cylinder heating/cooling: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 1,880 liters Jacket volume: 97.0 liters Cylinder wall thickness: 5 mm Product contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 1,140 mm Previous application: Pharmaceutical VESSEL Max. permissible operating temperature: 150 °C Number of feet: 3 pcs HEATING/COOLING JACKET Max. permissible operating vacuum: 1.0 bar Bottom temperature control: Double jacket INSULATION Insulation jacket: hermetically welded Insulation material: Mineral wool Insulation jacket material: Stainless steel EQUIPMENT Manhole / Dome: in top head (DN 400) Outlet: 48 mm MATERIAL SPECIFICATION Temperature control system material: AISI 316 (V4A) 1.4404 Foot material: Stainless steel AGITATOR 1 Agitator manufacturer: PRG Voltage: 230/400 Volt TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 10 mm Agitator arrangement: Bottom-mounted