Used Compressed Air Systems for sale (48,265)

Condition: ready for operation (used), System includes (1) Screw Compressor BOGE SF 75-2 (2) Cyclone Separator BEKO CLEARPOINT (3) Fine Filter BEKO CLEARPOINT (4) Refrigeration Dryer BEKO DRYPOINT RA eco (5) Catalytic Converter BEKO BEKOKAT CC 360 (6) Carbon Filter BEKO CLEARPOINT. Ihodpfxshvizgo Abrou

Condition: used, Filter assembly, DONALDSON ULTRAFILTER filter unit for compressor systems Double filter, stage filter Normal volume flow: 1440 m³/h = 24,000 liters/min Housing size: 0072 Tank volume: approx. 5 liters 1 unit with fine filter element (size 20/30) 1 unit with pre-filter element (size 20/30) Operating pressure: max. 16 bar Threaded connection: G 2 1/2" Flange connection: DN 100 Flange installation width: 580 mm - Differential pressure gauge - Automatic condensate drain UFM T10, 230 Volt (0.11 liters/min) - Filter housing made of aluminum Weight: approx. 35 kg Dimensions (L x W x H): 1030 x 850 x 200 mm Good condition Ihjdpfx Aboxf Uukorsu 2 units available: one each as a coarse and fine filter - suitable for use as a double filter or stage filter.

Condition: used, Filter fitting, filter unit COMPAIR for compressor units Compressed air filter Type: CF 0087B ZP Factory No.: 3363006 / 05 / 005 Ihjdpfehalvdox Abreu Operating pressure: max. 16 bar Thread connection: G 1 1/2" Flow rate: approx. 8,5 m³/min Filter element- No: CE 0087B - Filter housing made of aluminum weight: 5 kg dimension L x W x H 125 x 110 x 420 mm good condition

Condition: used, Compressed Air Dryer PARKER HIROSS for Compressor Systems Mechanical Condensate Separator, Water Separator Refrigeration Dryer with water-cooled aftercooler for removal of water vapor and cooling of compressed air or gases. 1 unit Aftercooler Type WFN009 DHH16 Air flow rate (standard): 540 m3/h = 9,000 liters/min. Operating pressure (air): max. 16 bar Ihsdpodzqn Ujfx Abreu Housing length: 1,020 mm Housing diameter: Ø 105 mm Threaded air connection: G 2" Threaded water connection: G 3/4" Weight of aftercooler: 11 kg Dimensions of aftercooler (L x W x H): 1,030 x 850 x 200 mm + 1 unit Water Separator Type CSP 008 Standard flow rate: 480 m3/h = 8,000 liters/min. Operating pressure: max. 16 bar Threaded connection: G 2" - Filter housing made of aluminum + 1 unit Mechanical Condensate Separator HIROSS SAC 120 Threaded connections: R 1/2" Operating pressure: 16 bar Volume: 0.8 liters - operates without compressed air loss All components assembled as shown in the photos Mounted height (upright): 2,000 mm Total weight approx. 40 kg 2 identical units available

Year of construction: 2019, condition: excellent (used), KAESER / TE 121 and BSD 72 Compressor system and dryer and with distribution system to machinery S-COM-005 Iodpfx Absvzhgierohu TESEOAIR / HBS50 15 Bar Compressed air system HBS50 max 15 Bar - 220 Psi - Max 15 MPa S-COM-008

Year of construction: 1990, condition: good (used), Compressor system with air dryer and compressed air tank. Ihodpsinur Asfx Abrou Length: 800mm Width: 800mm Height: 1000mm Volume: 1.5m³/min Power: 11kW

Condition: used, New compressed air refrigeration dryer, unused compressed air dryer from stock Compressed air dehumidifier SMC type IDFA3E-23 Compressed air dryer, compressed air dehumidifier Serial No.: PP0213S Year of manufacture: 2011 SMC compressed air dryer IDFA size 3E Flow rate per hour: 12,000 liters/h (12 m³/h) Flow rate per minute: 200 liters/min. Operating pressure max. 10 bar Operating pressure: 0.15 to 1.0 MPa (manufacturer's specification) Refrigerant: R134a Iodpfjyif I Usx Abrjhu Temperature range: 5°C to 50°C Power consumption: 180 watts Power supply: 230 volts, 50 Hz, 1.2 amps Connection pipe thread: 3/8" - Stainless steel heat exchanger, air-cooled condenser - Condensate separator with automatic drain - Condensate drainage via hose Space required (L x W x H): 410 x 226 x 473 mm Weight: 18 kg New, unused, in mint condition from stock

Condition: good (used), Year of construction: 1999, Screw compressor Airtower 19, year of manufacture 1999, 10 bar, 11 kW, in good condition. Iodpfoyhzf Hox Abrshu

Condition: good (used), Year of construction: 1998, Compressed air tank, pressure vessel, pressure tank, compressed air boiler, pressure vessel, compressor tank -Manufacturer: Mechanical and container construction, standing compressed air container -Content: 3000 l Iedpfxsphun Ej Abrehu -Operating pressure: 11 bar -Accessories: including attachments, see photos -Dimensions: Ø 1475 x 2760 mm -Weight: 700 kg

Condition: good (used), mileage: 647,400 km, fuel type: diesel, Year of construction: 2018, Mercedes-Benz Actros 2542LL 6X2 Full Air Suspension / BDF System / Chassis Cab / ACC / AHK / TUV 4-2026 / NL TRUCK Continuous stock, see website. Prices ex Nuland. Ihsdpsx Hr Umofx Abrou Van de Wert Trading B.V. has a changing stock of machinery, trucks, trailers, and attachments. All our deliveries are at trade prices in AS-IS condition, without warranties. (see our general terms and conditions) For a viewing and/or test drive, you can make a non-binding appointment. Please call in advance, as we are not always present. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: used, Year of construction: 2009, Overview  This complete compressed air installation was manufactured between 2009 and 2013 by Atlas Copco (Sweden) and Donaldson Filtration GmbH (Germany). The setup includes two Atlas Copco GA132 VSD low-pressure compressors, one Atlas Copco FD160 VSD air dryer, and one Donaldson UFA-AC0016 oil separator. Designed to deliver reliable and energy-efficient air supply at up to 8.5 bar, this system is ideal for continuous production environments. The installation has been regularly maintained, with full maintenance completed in August 2025, and is in good working condition. The entire system is still installed and connected, and immediately available for inspection and sale. Technical data  Years of Manufacture: 2009 – 2013 Application: Industrial compressed air system Total Capacity: 2 × 24.1 m³/min Maximum Pressure: 8.5 bar Power Supply: 274.8 kW Scope of Delivery  Compressor | Atlas Copco | GA132 VSD | 2013 Compressor | Atlas Copco | GA132 VSD | 2012 Air dryer | Atlas Copco | FD160 VSD | 2012 Oil separator | Donaldson Filtration GmbH | UFA-AC0016 | 2009 Iodpfsxrc Acox Abrehu

Condition: excellent (used), Year of construction: 2008, Refrigeration dryer Manufacturer: Kaeser Model: TF 173 Year of manufacture: 2008 Iedpfxsyi A Uzj Abrohu 2 units available Price per unit

Condition: good (used), Year of construction: 2002, Compressed Air dyer Operating pressure: max. 16 bar Temperature range: 5 - 43 celsius Voltage: 400 V Ijdpfx Abog Itzqorehu Weight: 625 kg Overall dimensions: 1300 x 900 x 2100 mm

Year of construction: 2026, condition: new, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture is fed to an efficient separator, where the condensate is separated and automatically drained outside the device. 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Inlet/outlet pipe diameter (BSP) 1 1/2" Maximum operating pressure 10 bar Ihedjmt Dcxopfx Abrou Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Efficiency 7000 l/min Power 1.37 kW Power supply voltage 230 V Dimensions (L x W x H) 1000 x 550 x 920 mm Weight 95 kg Type and amount of refrigerant R410a, 900 g

Condition: excellent (used), MANUFACTURER: ALUP MODEL: ADQ2700 SERIAL NO.: 07M011498 YEAR: 2007 POWER (kW): 8.7 CAPACITY (m3/min): 45 Ihodpfx Aboykvpherju PRESSURE (bar): 12 HOURS (DOCUMENTED/TOTAL):

Condition: excellent (used), Year of construction: 2015, MANUFACTURER: DRYTEC MODEL: SD1800 SERIAL NO.: 3414MA12150 Ihsdpfx Aeykvmtebrju YEAR: 2015 POWER (kW): 3.14 CAPACITY (m3/min): 30 PRESSURE (bar): 16 OPERATING HOURS (DOC/TOTAL): FREQUENCY INVERTER: BUILT-IN DRYER: R134a, 7kg

Condition: excellent (used), Year of construction: 2011, PROD. BRAND MODEL MDX6500 S/N CAI492661 YEAR 2011 POWER (kW) 1.64 CAPACITY (m3/min) 6.5 PRESSURE (bar) 13 Iodjykvk Eopfx Abrohu HOURS (DOC/TOTAL) FREQUENCY INVERTER BUILT-IN DRYER yes R404a 1.35kg

Year of construction: 2026, condition: new, functionality: fully functional, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture goes to an efficient separator, where the condensate is separated and automatically drained outside the device. 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Inlet/outlet pipe diameter (BSP) 1 1/2" Maximum operating pressure 10 bar Ihedpfxsmt Dcqs Abreu Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Efficiency 3800 l/min Power 0.9 kW Supply voltage 230 V Dimensions (L x W x H) 850 x 480 x 480 mm Weight 59 kg Type and amount of refrigerant R410a, 650 g

Condition: used, Year of construction: 2010, Operating hours: 58,730 h Technical data: Max. compressed air pressure: 14 bar Ihjdpfeydlycex Abrou Ambient temperature, max.: 50°C Refrigerant: R410A, 0.86 kg Connection: 230 V Weight, approx.: 154 kg

Condition: good (used), Compressed air tank, pressure vessel, pressure tank, compressed air reservoir, compressor tank, compressed air reservoir, compressed air storage tank, compressor tank -Manufacturer: Elektra-Beckum, compressed air tanks, compressed air storage Ihsdpfx Aoya Dfiebreu -Contents: 150 L -Operating pressure: 11 bar -Dimensions: 1460/510/H530 mm -Weight: 92 kg

Condition: used, Year of construction: 2021, functionality: fully functional, compressed air connection: 13 bar, type of input current: AC, volume flow: 390 m³/h, total width: 580 mm, total length: 588 mm, total height: 899 mm, pressure: 13 bar, overall weight: 80 kg, pressure dew point: 3 °C, input voltage: 230 V, ambient temperature (max.): 45 °C, ambient temperature (min.): 1 °C, pressure (max.): 14 bar, power: 0.71 kW (0.97 HP), empty load weight: 80 kg, input frequency: 50 Hz, nominal power: 0.71 kW (0.97 HP), input current: 3 A, air pressure: 13 bar, For sale: 2 industrial refrigerated compressed air dryers – available together or separately We are offering two used industrial refrigerated dryers for compressed air. The units can be sold as a set or individually. Ideally suited for integration into compressed air systems requiring reliable drying and condensate removal. 1. Airgroup AGD 450 – Refrigerated Compressed Air Dryer (2021) General information Brand / Model: Airgroup AGD 450 Year of manufacture: 2021 Serial number: 210008384 Code: AGD450AC9A085 Technical specifications Nominal flow rate: 450 m³/h Max. working pressure (compressed air circuit): 14 bar Compressed air circuit capacity: 5.9 liters Compressed air temperature range: 2 … 55 °C Refrigeration system Refrigerant: R407C Refrigerant quantity: 0.65 kg CO₂ equivalent: 1.15 t Refrigerant circuit volume: 0.6 liters PS HP / LP: 39.2 / 20.9 bar Refrigerant circuit temperature range: −10 … 120 °C Electrical Connection: 1/230 V ±10% / 50 Hz Power: 0.71 kW Nominal current: 3.4 A Max. current (FLA): 8.9 A Fuse: 10 A Ihedpfjyhdhmox Abrju Protection class: IP40 Other PED Directive: 2014/68/EU – Cat. I Fluid group: 2 Ambient temperature range: 1 … 45 °C Diagram: WD003 V00 R00 2. ALUP ADQ 390 – Refrigerated Compressed Air Dryer (2014) General information Brand / Model: ALUP ADQ 390 Year of manufacture: 2014 Product number: 4102000802 Serial number: CAI692332 Technical specifications Nominal flow rate: approx. 390 m³/h Working pressure: 13 bar Max. pressure: 13 bar Temperatures Max. inlet compressed air temperature: 55 °C Max. ambient temperature: 43 °C Electrical Connection: 230 V / 50 Hz Power: 1.64 kW Phase: single phase Refrigerant Type: R404A Quantity: 1.35 kg Weight Total weight: approx. 80 kg Sales Information - Available as a set or individually - Suitable for industrial compressed air installations - Ideal for removing moisture and condensate from compressed air Interested or have questions? Feel free to contact us for more information, a quote, or to schedule a viewing.

Year of construction: 1998, condition: ready for operation (used), A filter and recovery system with filling and intermediate shaft and a new control system as peripheral equipment for the production of technical nonwovens and felt is available. Components: Fan, three-phase motor WN 1 8030 T.50, condenser Erko, separator (exhauster) Erko, filling shaft, intermediate shaft. Control cabinet dimensions X/Y/Z: approx. 1200mm/600mm/2200mm, weight: approx. 300kg, year of construction: 2023, total system dimensions X/Y/Z: approx. 3150mm/1100mm/3700mm. Documentation available. On-site inspection is possible. Ihjdpfeww Ivzox Abrju

Year of construction: 1980, condition: ready for operation (used), Two compressed air tanks are available. 1) Karl Kremsmüller u. Co., year of construction: 1980, operating pressure: 7bar, test pressure: 9.1bar, operating temperature: 20°C, medium: compressed air, capacity: 5300l. 2) Engelbert Dax, year of manufacture: 1973, capacity: 15000l, operating pressure: 4ATÜ, test pressure: 5.2ATÜ. On-site inspection is possible. Ihodpfx Abeumwg Esrju

Condition: good (used), Year of construction: 2020, functionality: fully functional, Refrigeration dryer with condensate separator, year of manufacture 12/2020, capacity/volume flow: approx. 1.75 m³/min (≈ 105 m³/h / 1050 l/min), pressure dew point: typically +3 °C (under reference conditions), max. operating pressure: up to approx. 14 bar, dimensions: approx. 255×455×708 mm, weight: approx. 36 kg, in good condition. Price ex location. Transport available at extra cost! Ijdpfxeybbggs Abrjhu

Year of construction: 2021, condition: good (used), Motor output 7,5 kW Overall size ca. (L x B x H) 1.935 x 6 mm Ijdoxzuxbopfx Abrshu Weight ca. 447 kg Receiver 500 L Max. pressure 13 bar