Used Warm Air for sale (26,089)

Condition: good (used), Reznor UDSA gas air heater UDSA gas warm air heater - efficient right up to the peaks The best-known device from REZNOR is the UDSA gas hot air generator, which ensures even air distribution in industrial halls. The easy-to-install air circulation unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner and an exhaust fan. The combustion air can be taken either from outside or from the showroom as standard. The UDSA hot air generator from REZNOR ensures even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer and ensures an efficiency of over 92 percent. UDSA: compact, revolutionary and trend-setting. Rcedpfxowb A Hie Amtsf With this generation of appliances, halls can be heated directly in a particularly economical way - i.e. without central heating - with decentrally arranged, modulating gas hot air heaters. REZNOR UDSA Gas hot air heaters. The advantages: Efficiency of more than 92% Device is also suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation with CE system certification, version B or C Compact design for easy installation even heat distribution Vertical and horizontal air guide fins as standard Modulation of the heat output up to 50% EC technology ErP Ready These appliances are directly heated gas WLEs with fan-assisted atmospheric multi-gas burners. Only an approved installation company may carry out the installation of the gas WLE and the gas and flue gas connections. The gas WLEs are suitable for : - Natural gas or liquid gas operation - Recirculated air operation - Intake temperatures below 5°C with stainless steel heat exchanger * - 1-stage or 2-stage heating operation* Control via room thermostat and heating control switch - Ventilation° Control via ECOtronic TN - L° with day/night/week program Exhaust gas discharge via roof, version B or C ° Exhaust gas discharge through the outer wall, version C ° Gas WLE type: UDSA055-4E Gas appliance type: B22P-C12-C32-C52-C62 Destination: DE Gas category: I2ELL Gas type: G20 natural gas Connection pressure: 20 mbar Nozzle pressure: 8.40 mbar Max. Nominal heat load (Hs) QN: 66.04 kW Max. Nominal heat load (Hi) QN: 59.50 kW Min. nominal heat load (Hs) QN: 33.02 kW Min. nominal heat load (Hi) QN: 29.75 kW Max. Nominal heat output: 54.74 kW Min. nominal heat output: 26.92 kW Supply voltage: 230V 1N ,50Hz Air flow rate: 5830 m3/h Protection class: IP20 Pin no. 0461BN0677 Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: good (used), Reznor UDSA Gas-Fired Warm Air Generator UDSA Gas-Fired Warm Air Generator – Efficient to the Peak The best-known appliance from REZNOR is the UDSA gas-fired warm air generator, which ensures even air distribution in industrial buildings. This easy-to-install recirculating air unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner, and exhaust fan. Combustion air can be drawn either from outside or from the showroom (standard configuration). The REZNOR UDSA warm air generator guarantees even air distribution throughout the heated building. Its patented heat exchanger sets new standards in terms of airflow and heat transfer, achieving an efficiency of over 92 percent. UDSA: compact, revolutionary, and trendsetting. This generation of appliances allows for the particularly economical direct heating of buildings – without a central heating system – using decentralized, modulating gas-fired warm air generators. REZNOR UDSA Gas-fired warm air generator. The advantages: Efficiency of over 92% Suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation CE system certified, version B or C Compact design for easy installation Uniform heat distribution Standard vertical and horizontal air guide vanes Heating output modulation up to 50% EC technology ErP Ready These units are direct-fired gas-fired warm air generators with fan-assisted atmospheric multi-gas burners. Installation of the gas-fired warm air generator, including gas and flue connections, must be carried out by an authorized installation company. The gas-fired WLEs are suitable for: - Natural gas or LPG operation - Forced air operation - Intake temperatures below 5°C with stainless steel heat exchanger* - Heating operation, 1-stage or 2-stage*, controlled via room thermostat and heating control switch - Ventilation° controlled via ECOtronic TN-L° with day/night/weekly program. Flue gas discharge via roof, version B or C ° Flue gas discharge through the exterior wall, version C ° Gas-fired WLE type: UDSA015-4 Gas appliance type: B22P-C12-C32-C52-C62-C82 Regulation: DE Gas category: I2ELL Gas type: G20 natural gas Connection pressure: 20 mbar Rcodpex Ihiisfx Amtof Nozzle pressure: 7.80 mbar Max. nominal heat input (Hs) QN: 17.60 kW Max. nominal heat input (Hi) QN: 15.86 kW Max. rated heat output: 14.59 kW Min. rated heat output: Connection voltage: 230V 1N, 50Hz Air volume flow: 1360 m³/h Protection class: IP20 Find more items – new and used – in our shop! International shipping costs on request!

Condition: new, functionality: fully functional, overall weight: 450 kg, Year of construction: 2022, machine/vehicle number: 41728980, THERMOBILE, IMA-200 RHP GB 200-RHP, mobile warm air generator (400 V) with separate exhaust gas duct, mounted oil burner RG 4, heating oil pre-filter, radial fan and plug-in thermostat preparation. Year of manufacture 2022, operating hours: 0 - Nominal heat load 200 kW - Air output 13000 m³/h - Connection 400 V - Pressure 500 Pa - Weight 450 kg Technical highlights of this series: - Burner hood with oil drip pan - Blow-out opening Ø 600 mm Rsdpfx Ajvnuq Ismtocf - Preparation for recirculation operation (optional intake manifold available, article no. TE41728445) - Thermostat connection prepared (plug-in contact) - Electrical distribution placed in a shock-protected manner - Robust design with large wheels for easy Transport even on difficult terrain Accessories such as room thermostat, warm air hoses, tanks and tank heaters, as well as exhaust pipes and rain hats are not included in this offer, but can be offered on request. Note: The buyer can have the item picked up by a freight forwarder. If you do not have contact with any shipping companies, we will be happy to provide you with addresses or make inquiries for you.

Condition: good (used), ApenGroup LRP28DE Gas-Fired Warm Air Generator Gas Type: G20 Natural Gas Connection Pressure: 20 mbar Rodex Ihlkspfx Amtecf Nominal Heat Input QN: 27 kW Nominal Heat Output: 24.63 kW Connection Voltage: 230V 1N, 50Hz Airflow: 2700 m³/h Protection Class: IP20 Find more items – new and used – in our shop! International shipping costs on request!

Condition: good (used), Reznor UDSA Gas-Fired Warm Air Generator UDSA Gas-Fired Warm Air Generator – Efficient to the Peak The best-known appliance from REZNOR is the UDSA gas-fired warm air generator, which ensures even air distribution in industrial buildings. This easy-to-install recirculating air unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner, and exhaust fan. Combustion air can be drawn either from outside or from the showroom (standard configuration). The REZNOR UDSA warm air generator guarantees even air distribution throughout the heated building. Its patented heat exchanger sets new standards in terms of airflow and heat transfer, achieving an efficiency of over 92 percent. Rcsdpsx Ihg Iefx Amtef UDSA: compact, revolutionary, and trendsetting. This generation of appliances allows for the particularly economical direct heating of buildings – without a central heating system – using decentralized, modulating gas-fired warm air generators. REZNOR UDSA Gas-fired warm air generator. The advantages: Efficiency of over 92% Suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation CE system certified, version B or C Compact design for easy installation Uniform heat distribution Standard vertical and horizontal air guide vanes Heating output modulation up to 50% EC technology ErP Ready These units are direct-fired gas-fired warm air generators with fan-assisted atmospheric multi-gas burners. Installation of the gas-fired warm air generator, including gas and flue connections, must be carried out by an authorized installation company. The gas-fired WLEs are suitable for: - Natural gas or LPG operation - Forced air operation - Intake temperatures below 5°C with stainless steel heat exchanger* - Heating operation, 1-stage or 2-stage*, controlled via room thermostat and heating control switch - Ventilation° controlled via ECOtronic TN-L° with day/night/weekly program. Flue gas discharge via roof, version B or C ° Flue gas discharge through the exterior wall, version C ° Gas-fired WLE type: UDSA025-3 Gas appliance type: B22P-C12-C32-C52-C62 Regulation: DE Gas category: I2ELL Gas type: G20 natural gas Connection pressure: 20 mbar Nozzle pressure: 8.20 mbar Max. nominal heat input (Hs) QN: 30.08 kW Max. nominal heat input (Hi) QN: 27.75 kW Max. rated heat output: 25.53 kW Min. rated heat output: Connection voltage: 230V 1N, 50Hz Air volume flow: 2385 m³/h Protection class: IP20 Find more items – new and used – in our shop! International shipping costs on request!

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 600x800x1900 mm Weight 230 kg Total power requirement 0,5 kw Redjvz Hqmspfx Amtscf

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 600x800x1900 mm Weight 230 kg Total power requirement 0,5 kw Rjdpfxovz Hqts Amtocf

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 720x1000x1900 mm Weight 300 kg Rsdpovz Hq Hofx Amtocf Total power requirement 1,2 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 800x1170x2280 mm Weight 500 kg Total power requirement 1 kw Rodpfx Aovz Hq Tomtscf

Condition: used, Year of construction: 2008, overall weight: 1,250 kg, total width: 1,220 mm, total length: 2,700 mm, total height: 2,245 mm, nominal heat output: 600 kW (815.77 HP), No. 10035 2 units stationary warm air heater / generator Kroll 730 S-300 Used, year of construction 2008 According to our customer / the previous owner, the machines are fully functional and can be viewed on site Heat output QN: 600 kW Rated heat input QB: 652 kW Warm air flow rate VN: 48,300 m³/h Rated pressure DN: 300 Pa Motor: 15.0 kW / 28.6 A CE-compliant Transport dimensions each approx. 2700 x 1220 x 2245 mm LWH Weight each approx. 1250 kg Sale on behalf of customer, ex location near 69123 Heidelberg, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price Rsdpfxozlr Uuj Amtjcf To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex location

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 800x1170x2300 mm Rodjvz Hhxepfx Amtjcf Weight 650 kg Total power requirement 1,05 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1700x2000x2550 mm Rcjdjvz Hqyopfx Amtof Weight 1400 kg Total power requirement 4,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1300x1700x2550 mm Rcedpfx Aevz Hqgjmtef Weight 1200 kg Total power requirement 2 kw

Condition: new, Year of construction: 2025, Combustion chamber output: 350 kW Working output: 279 kW Flue gas outlet diameter: 200 mm Hot air distribution ducts: 1 x 600 mm Combustion chamber length: 1200 mm Combustion chamber width: 740 mm Combustion chamber height: 1040 mm Air delivery: 17,800 m³/h Hot air fan power consumption: 3 kW Flue gas fan power consumption: 600 W Designed for room volume: 5,000 m³ Rjdpfx Amsyffyljtscf Area to be heated: 1,000 m² Oven height without hot air ducts: 2,500 mm Oven width: 1,100 mm Oven length without flue gas fan: 1,900 mm Weight: 850 kg

Condition: used, Year of construction: 2007, functionality: fully functional, overall weight: 200 kg, REA Jumbo 115 / Jumbo 200, mobile warm air generator (230 V) with separate flue gas duct, mounted oil burner RG 4, pre-installed heating oil filter, radial fan, and plug-ready thermostat interface. Rcsdpfxjyq Rics Amtef Year of manufacture: 2007 - Rated heat input: 115 kW - Air output: 9,000 m³/h - Connection: 230 V - Weight: 200 kg Technical highlights of this series: - Burner hood with oil drip tray - Outlet opening: Ø 600 mm - Pre-fitted for recirculation operation - Shock-protected electrical distribution - Robust construction with large wheels for easy transport, even on rough terrain Accessories such as room thermostat, warm air hoses, tanks and tank heaters, as well as flue pipes and rain caps are not included in this offer but can be provided on request. Note: The buyer can arrange collection via a freight forwarder. If you do not have contact with forwarding agents, we are happy to provide addresses or arrange inquiries on your behalf.

Condition: new, Heating capacity 30 kW Rcjdevxa Itepfx Amtjf Dimensions (L/W/H) 105 cm x 60 cm x 147 cm cm - NEW -Kanuk Turbo 2 *new look*hot air stoveincl. heat exchanger and hot air blowernominal heat output 30 kWdimensions 105 cm x 60 cm x 147 cmheatable room volume 1000 m³log length 80 cmefficiency 82,4 %flue pipe connection 150 mmitem no. 2100006

Condition: new, - NEW -Kanuk® OriginalHot air ovenNominal heat output: 15.4 kWDimensions: 80 x 58 x 95 cmheatable room volume: 450 m³Efficiency: 83.4%Log length: 48 cmFlue pipe connection: 160 mmTotal power (kW): 15.4Dimensions H x W x D (cm): 80/58/95Space heating capacity (m³): 450Flue pipe connection (mm): 160Flue pipe connection: top / rear viewing window (cm): 28 x 15Efficiency (%): 83.3Weight (kg): 148Exhaust temperature (° C): 216Log length (cm): 48Wood consumption (kg / h): 3.9Exhaust gas mass flow (g / s): 14.28Minimum chimney draft (Pa): 16Exhaust throttle valve: ing chamber H x W x D (cm): 40 x 44 x 49.5Ash box: e 1 (self-closing door): OptionalWindow flushing: YesBimSchV Level 2: YesLogs, wood briquettes: YesDIN EN number: 13240Brown coal briquette: No AT §15a B-VG Norm: YesPrimary, secondary, tertiary air: yesCE mark: YesOutside air connection (mm): 100LRVSwitzerland: yesNo. 2100102 Redpjvwf Rkjfx Amtocf

Condition: like new (used), Year of construction: 2007, power: 5.5 kW (7.48 HP), For sale is a Solid Air piston compressor (2-cylinder version, 5.5 kW, 2007) in excellent, technically flawless condition – including a matching 500 L compressed air tank (2007). A special feature of this compressor: it was used exclusively as an emergency unit, so it has hardly been run. Accordingly, it has very few operating hours and is in almost new condition, both technically and visually. The compressor has always been regularly serviced, is fully functional, has been inspected, and is ready for immediate use. The included 500 L compressed air tank ensures a consistent, pressure-stable air supply and, by reducing the number of switching cycles, also protects the compressor. Technical data: - Type: Piston compressor, 2-cylinder - Motor power: 5.5 kW - Compression pressure: 10 bar - Displacement flow rate: 916 l/min - Operating speed: 850 min⁻¹ - Compressed air tank: 500 L (included) - Operating hours: very low (used only as an emergency unit) With our comprehensive all-inclusive package, we will personally take care of the complete service for you – from delivery to the commissioning of your new compressor. This includes unloading, setting up, and aligning the system. Our experienced service technicians will then professionally commission the system, carry out all necessary functional tests, and ensure that your Solid Air compressor, together with the 500 L tank, runs reliably and efficiently. In addition, we offer individual training for your employees so that you can use the system optimally from the start. We will also continue to be available to you after installation – whether for maintenance, technical questions, or future expansions. With our comprehensive all-inclusive package, you don't have to worry about anything – we will ensure that everything runs smoothly and that you can focus entirely on your production. Our service promise: Quality, competence, and customer satisfaction are our top priorities. Our team consists of qualified and experienced technicians who specialize in compressed air and compressor systems, as well as other machines. We place great value on personal support and will be happy to assist you at any time, even after the purchase. In addition, you have the opportunity to inspect and test the system at any time in our workshop. You are cordially invited to come and see the condition and operation of the system for yourself. Rcsdpfozlhp Uex Amtjf You are in the best hands with us – professional, reliable, and with a passion for machines! PS CNC Service Germany GmbH & Co. KG All information is subject to change without notice.

Condition: used, Year of construction: 2006, FIAC CRS20 Soundproof Screw Compressor – Year 2006 Complete with a 500-litre air receiver and FIAC DS20/AC refrigerated air dryer, ideal for ensuring a continuous supply of compressed air with low noise levels. Rcsdpfxezq Amre Amtof Technical Specifications Air delivery (F.A.D.): 1,860 l/min Maximum pressure: 10 bar Power consumption: 17.6 kW Motor power: 20 HP Air receiver capacity: 500 litres Weight: 461 kg Availability: Delivery scheduled for September 2026.

Condition: excellent (used), Year of construction: 2019, overall weight: 500 kg, total length: 2,000 mm, total width: 1,600 mm, total height: 2,200 mm, Load capacity: 2,200 kg Table – Ø: 1,525 mm Band width: max. 150 mm Band thickness: max. 1.27 mm Stack height: max. 760 mm Speed: max. 10 RPM, continuously adjustable Design: o Frame in a robust welded construction o Loop control via a joystick with a roller o Speed can be pre-selected via a display Rcsdpfx Amjzvqzzetef o Right/left rotation o Fixture for inner diameter

Condition: good (used), Year of construction: 2002, For sale are 3 units of electrostatic industrial filters from the brand Air-Fresh-Service, model F-V10. Voltage/Frequency: 230V/50Hz Current: 1.0 A Power: 0.22 kW Transport and loading can be organized across Europe at an additional cost if required. Prices are exclusive of VAT. Viewing is possible by appointment. Please contact us; our team will be pleased to assist you further. Machinery Purchase / Sale Rsdpfx Amjy H H Dvetecf PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, AND MORE. Are you looking for a high-quality yet affordable machine for your production? Or do you want to sell yours? For further information or to get in touch, please use the contact form.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, Equipment: documentation/manual, refrigerant dryer, type plate available, Container includes the following contents: - 10ft storage container, new / Color: Anthracite grey - SSC-Strong 37 Vario • Speed-controlled screw compressor • Free air delivery at 8 bar: 6.3 m³/min • Dimensions (LxWxH): 1432 x 1000 x 1480 mm • Weight: 705 kg Rcedpfxjxc T Evj Amtef - 2 compressed air tanks, 500 l each o With AD2000 certification o Horizontal design - 2 Ecomat 31 condensate drains - 2 sets of fittings - SCC refrigerant dryer DRA480 o ISO 8573-1 Class 4 o Refrigerant: R407C o Capacity: 480 m³ - Pre-filter FIL934-P - Fine filter FIL934-M The compressor has seen very little use and therefore has low operating hours. Upon request, we can read the operating hours and run the compressor for demonstration.

Condition: like new (used), Year of construction: 2013, Manufacturer: Kaeser Kompressoren, Germany YOM 2013 Maximum Pressure: Up to 13 Bar Productivity 8.26 cubic meters/min Energy Efficiency: The direct drive coupled with IE4 efficiency motors (or IE5 on SFC models) ensures superior energy efficiency. Low Maintenance: Components are designed for long service life, with easy access for maintenance. SIGMA Control 2: Ensures efficient monitoring and control of the compressor. Rotary compressor type Screw by lubrication Oil Noise level 70 dB Height 1900 mm Length 1110 mm Width 1760 mm Weight 1250 kg Electrical parameters Mains voltage 380~400 V Rcsdpfx Amoyy U Shjtjf Power consumption 45 W Current frequency 50 Hz User characteristics Compressor cooling system Water cooling is possible, with subsequent use of heat. Complete system ready to use fully automatic extremely effective sound insulation vibration insulation powder-coated housing parts for ambient temperatures up to +45°C easy maintenance: lubrication nipples for motor bearings are located on the outside (also for fan motor).

Condition: used, We have two compressor Jun-Air Model 6 mobile units available. Specs you can see on the pictures Rcjdpfozwk S Ajx Amtjf

Condition: good (used), Year of construction: 2008, Offer 26696 Technical specifications (approximate): - CNC flame cutting machine with 2 torches, as shown in the image - 2 torches with adjustable height and inclination Redpfjzvnb Sex Amtocf - Track gauge approx. 4.2 m - Track length approx. 7.5 m - Track height approx. 0.5 m - Support table - Space requirement approx. L 8 x W 7.5 x H 2.3 m - Weight approx. 3 tons