Elect./Voltage: 220 V, 60 Cy, 1 Ph.
LAGUNA BANDIT HOT AIR EDGEBANDER0.4 - 1.5 mm Edge thickness cap. w/automatic cutoff up to 0.8 mm (1/32") only; for pre-glued edgebanding, automatic coil feed magazine, manual single feed for strips, min. panel width 50 mm, panel thickness 10 - 50 mm; LEISTER hot air blower (3.0 kW) for reactivating of adhesive, powered belt type holddown over feed thru table, feed speed 20 FPM. Front & rear end trim guillotine knives, top & bottom high speed (10,00... more
Air coolers, evaporators, cold storage, reefer container, cooling fan 470 watt cell -2x 1350 U / min fan: Diameter mm mm -Lammelenabstand Enclosures stainless steel -Dimensions 1100/2300 / H720 mm -Weight 260 kg
Dimensions (l x w x h) approx.: 8000 x 2600 x 2800 mm
Weight approx.: 2000 kg
Description: length of oven approx. 3900 mm, working width approx. 1300 mm, with output roller conveyor, dimensions of roller conveyor 3950 x 1300 x 930 mm
In Online Auction with approx. 392 further Machine Tools and other Assets!
Bidding ends: Friday, 09 June 2017 from 9am (local time)
Auction start price: EUR 350 (plus VAT and 15% buyers premium)
Your contact person: Paolo Forni more
Operation mode: continuous operation
Type of power: Three-phase
Frequency: 50 Hz
Power consumption: 6,5 kW
Mains voltage: 3 pH 400 V
Power consumption: 13.3 A
Filter surface: 22.4 m2
Dimensions l x w x h: 2.318 x 994 x 2,346
Weight: 480 kg
Flow rate: 4,900 m3/h
Related vacuum: 2,750 PA
Minimum flow rate: 3.532 m3/h
related vacuum: 3,800 PA
Compressed air connection of min. 6.0 bar, maximum 8.5 bar
Sound pressure level: Com. n. EN ISO 3744 74 dB(A)
Measurement uncertaint... more
HEUFT ultimate Rotary rack oven 60/80 cm gas stainless steel
baked is located while car
for sheet size 60/80 cm.
Stainless steel execution
for 1 rack trolley
On customer request, the oven can be equipped also with an oil burner.
Nominal thermal power: 85 KW
Gas 400 V 50 Hz dimensions:
Width: 156 cm
Depth: 156 cm
Height: 256 cm
The hood is over front approx 4... more
there are 2 screws compressors,
3500 U / min
3500 U / min
2 dryer fabr Ingersol
from stock Bochum
Package price for 2 compressors 3.500 Eur VAT.
Elect./Voltage: 380 V, 50 Cy, 3 Ph.
Designed for lamination of pre-shaped & glued panels with Veneer, PVC & Polypropylene films with the use of a membrane; works well with thick PVC and especially well with Veneer since it applies positive, direct pressure to the profiled/contoured surface. This concept allows for cycle times as short as (1.5 - 2) Min depending on the Veneer thickness. -- Manual loading/unloading tray "flame cut" steel frames; platen dimensions: 2300 mm X 900 mm (90.5"... more
Air coolers, evaporators, cold storage, refrigerated containers, refrigerated cell -1x fan fan: Diameter mm mm -Lammelenabstand Enclosures -2x stainless steel cooler -Abtropfwanne available prize piece -Dimensions 1100/1450 / H720 mm -Weight 184 kg
Dimensions (l x w x h) approx.: 1500 x 800 x 1800 mm
Weight approx.: 800 kg
Description: Power 5.4 kW, refrigerant R 407 C, quantity 4.46 kg
In Online Auction with approx. 312 further Machine Tools and other Assets!
Bidding ends: Thursday, 01 June 2017 from 9am (local time)
Auction start price: EUR 300 (plus VAT and 15% buyers premium)
Your contact person: Alessandro Icardi more
Technical details of delivery pressure: 10 bar liter power: 3 000 l volume flow: 4.05 m ³/min operating hours: 34940 h total power requirement: 30 kw machine weight approx.: 0.67 t space approx.: 2, 2 x 0, 9 x 1, 65 m
- Producer Hackemack
- Type KTR 2540
- Working width 1300 mm
- Length only drying tunnel 13.000 mm
- Slot jet nozzle system
- Number of adjustable temperature zone 1 Stk.
- Number of heater (boiler) units 1 Stk.
- Fresh air min. 2.500 m³/h
- Heat output 116 kW
- Drying temperature 80 Grad
- Incl. heat exchanger PHW 120 / 100
- Exhaust pipe 350 mm
- Transport belttransport 20.000 mm
- Producer conveyor Hackemack
- Feed speed infinitely adjustable ~ 20 - 30 ... more
Elect./Voltage: 480 V, 60 Cy, 3 Ph.
INGERSOLL-RAND T 30 2-Stage Reciprocating Air CompressorSpecifications and Features: -- 72 CFM, Finned intercooler and rugged one-piece connecting rods; pressure switch start/stop, load-unload valve, air cooled after-cooler, oil safety shut-down switch. -- Complete with: Automatic shut-down on low oil; water drain, magnetic motor starter. -- Actual model is T30 253DR. more
Air coolers, evaporators, cold storage, refrigerated containers, refrigerated cell -1x fan fan: Diameter mm mm -Lammelenabstand Enclosures -2x from -Abtropfwanne cooler available prize piece -Dimensions 1700/1200 / H970 mm -Weight 232 kg
Dimensions (l x w x h) approx.: 1200 x 800 x 740 mm
Weight approx.: 120 kg
Description: 1.5 kW, 2850 rpm, rotary plate diameter 700 mm, saw blade diameter 230 mm, footswitch, see photos for details
In Online Auction with approx. 74 further Machine Tools and other Assets!
Bidding ends: Tuesday, 06 June 2017 from 10am (local time)
Auction start price: EUR 100 (plus VAT and 15% buyers premium)
Your contact person: Marc Nepsen more
gebr. UP welder make AIR LIQUIDE
Model Starmatic 1003 DC REF.-No.: W000315019
. - No. 267608-332 built 2012
Welding current 200-1000 A
Power consumption 100% 100a
Power consumption 100% 65.8 kVA
Power supply 400 V
Hose length approx. 18 m
Welder Air Liquide Subarc 3 C.
REF.-No.: 91096890,. No.: 00361202063, built in 2012.
with welded fitting, ref.-No.: 91096172
Welding cart Air Liquide Megatrac, built in 2011.
. No.: 00361128253
Flux recovery unit, ... more
Elect./Voltage: 575 V, 60 Cy, 3 Ph.
CURTIS RS50B Rotary Screw Air Compressor 50 HP EPAct energy efficient motor. -- V-belt driven pump with totally Totally Enclosed Belt Guard that produces 212 CFM 125 PSI -- Compact base mounted unit, Auto-Dual controller optimizes the use of the compressor. -- Complete with: Heavy duty intake filter, mult-stage oil speration system with, oil filter bypase system, radiatory stile air/oil cooler & rigid base with fork lift slots for easy rem... more
Air coolers, evaporators, cold storage, refrigerated containers, cold store, ceiling air cooler fan -1x fan: diameter 400 mm -Lammelenabstand mm -Dimensions 1030/1770 / H400 mm -Weight 82 kg
Dimensions (l x w x h) approx.: 700 x 700 x 1500 mm
Weight approx.: 80 kg
Description: Pressure max. 18 Bar, endowed with 2 filters, see photos.
In Online Auction with approx. 487 further Machine Tools and other Assets!
Bidding ends: Tuesday, 20 June 2017 from 9am (local time)
Auction start price: EUR 290 (plus VAT and 15% buyers premium)
Your contact person: Simone Clini more
Tank volume: 2000 l
Test pressure: 16 bar
Operating pressure of 0-11 bar
The tank has been used since 2007 to operate an oil mill.
Device has been serviced regularly through a maintenance contract.
Elect./Voltage: 575 V, 60 Cy, 3 Ph.
COMPAIR 6075WH Rotary Air Compressor75 HP Motor 325 CFM 125 PSI, Water cooledFEATURES: --Totally integrated package, single-stage asymmetrical rotary screw air-end. -- Triplex bearings for long life, --Efficient 3-stage air/oil separator 1 - 3 PPM. --Mounted on a formed steel base with vibration isolated sub-base, belt driven with automatic belt tensioning device, and leak resistant fittings more
Air coolers, evaporators, cold storage, reefer container, cooling fan 520 watt cell -2x 1350 U / min fan: Diameter mm mm -Lammelenabstand -Elektroabtauung Enclosures stainless steel -Abtropfwanne -3x cooler available prize piece -Dimensions 1100/2340 / H700 mm -Weight 318 kg
Weight approx.: 6000 kg
Dimensions (l x w x h) approx.: 3000 x 1500 x 620 mm
Description: table length 3000 mm table width 1500 mm table height 620 mm distance of T-slot from edge 100 mm number of T-slots 8
In Online Auction with approx. 90 further Machine Tools and other Assets!
Bidding ends: Friday, 09 June 2017 from 10am (local time)
Auction start price: EUR 6.900 (plus VAT and 15% buyers premium)
Your contact person: Siegfried Bernatzki more
about 8,000 pieces, high quality moisture-proof luminaire or lamp with bulb, 2 x 49W. -used, almost new -:
Price up to 100 pieces: 20.-€ (net)
Price from 250 units: €18 (net)
Price from 500 units: €16 (net)
Price from 1,000 units: CHF 15.-€ (net) = only 12.5% of the new price!
Minimum order quantity: 20 pieces
Manufacturer: Beghelli type: moisture-proof luminaire PS110 T5 RE 249
2 x T5 deep / wide beam
Lights were in use for only about 6 months!
Condition: g... more
Air coolers, evaporators, cold storage, refrigerated containers, refrigerated cell -1x fan fan: Diameter mm mm -Lammelenabstand Enclosures from -Abtropfwanne -Dimensions 1700/1200 / H970 mm -Weight 232 kg
Dimensions (l x w x h) approx.: 10900 x 6600 x 4100 mm
Weight approx.: 4000 kg
Description: Useful surface approx. 9900 x 6600 mm, With 8 uprights, Storage height approx. 3150 mm, With wooden floor, With stairway, With railing, For more details see the photos
In Online Auction with approx. 124 further Machine Tools and other Assets!
Bidding ends: Tuesday, 13 June 2017 from 11am (local time)
Auction start price: EUR 2.300 (plus VAT and 15% buyers premium)
Your contact person: Emilio ... more
Has gone through a total renovation in 2015
: 4,9 kW
Total airflow : 8 500 m³ / h
Outlet diameter : 450 mm
Pneumatic connection : 6 bars
Consumption : 30 Nm³ / hour
For 4 Airmix guns in normal operation
Width : 1 250 mm
Feed speed : 3 to 6 m/min (*)
Rotation speed : 22 Rpm
Usable width (edges included) : 1 250 mm
PRODUCTION : 500 à 1 500 m² / team
It depends of the pieces and of the
Size : 4 755 x 2 120 mm
Building compressor CompAir Zitair 100
Engine: Deutz F2L511
Hours of operation: 87 h
Power: 25 KW
Speed: 2800 1/min
Air volume: 2.8 m ^ 3/min
Max. Pressure: 7 bar
Total weight: 900 kg
Accessories: impact hammer & chisel
Condition: Very good
Sales in the sales order.
Location: Harrow in the Valley
Used, no guarantee and warranty.
Air coolers, evaporators, cold storage, reefer container, cooling fan 470 watt cell -2x 1350 U / min fan: Diameter mm mm -Lammelenabstand -Abtropfwanne Enclosures stainless steel -Dimensions 1100/2390 / H700 mm -Weight 240 kg
WALLAIR hood stainless steel
approx. 125 x 83 x 51 cm (W x D x H)
Hood, cooker hood with engine
Ceiling-mounted 3 speeds
2 grease filter
Lighting trim for chimney pipe
230 V 290 W total
Width: 125 cm
Depth: approx. 83 cm
Height: approx 51 cm chimney hole: approx 21 x 16.5 cm (W x D)
Chimney hole inside: 15 x 11 cm (W x D)
Diameter: approx. 12 cm
Height of the pipe casing: approx. 40 cm
On each side there are 2 holes of 3 mm diameter.
Type 1725 mobile including Airmix gun MX, hose, suction cup system (2. connection for suction hose) execution stainless steel, including operating instructions, parts list, as well as various spare gaskets.
Gun MX: spray head and nozzle and seals need to be replaced.
Air coolers, evaporators, cold storage, refrigerated containers, refrigerated cell -3x fan fan: Diameter mm mm -Lammelenabstand Enclosures stainless steel -Abtropfwanne -Dimensions 3320/1100 / H720 mm -Weight 500 kg
ECO box wall hood without motor, regulator & lighting stainless steel
NEW 1B-Ware *.
Hood is made from stainless steel
State in photos (1B-Ware)
Width: 300 cm
Depth: 40 cm
Height: 90 cm
Weight: 72 kg
The hood is camp in our Cologne and can be visited by appointment.
Important information for our customers!
B-ware means that scratches and small dents may be present.
On request we invite you to visit before you purchase.
Pick up must be maximum 10 da... more
length: 3700 mm
width: 3200 mm
storage level: 1
Dimensions (l x w x h) approx.: 3700x3200x1650 mm
Weight approx.: 500 kg
Description: Capacity max. 400 kg / m² (distributed load), platform 3700 x 3200 mm, height 1650 mm to 4 columns, plate compartments 3 pieces with each forward a role (450 x 2500 x 1350 mm) high trays 4 piece (1500 x 545 mm), guard rails and aluminum conductors (volume and parts see pictures) more
ATLAS COPCO ZR5 B (097220) OIL FREE AIR COMPRESSOR MADE IN 1988, 21,000 HOURS, 315KW, MAX FINAL PRESSURE 8.5 Bar, 771 L/S
ATLAS COPCO ZR5 B (098091) OIL FREE AIR COMPRESSOR MADE IN 1988, 13,000 HOURS, 315KW, MAX FINAL PRESSURE 8.5 Bar, 771 L/S
ATLAS COPCO ZR5 B (ARP484574) OIL FREE AIR COMPRESSOR MADE IN 1987, 19,000 HOURS, 315KW, MAX FINAL PRESSURE 8.5 Bar, 771 L/S
All information, offers and prices on this site are subject to change and non-binding!
By using this website, you acknowledge and agree to our Terms & Conditions and Privacy Statement.
All brand names are the property of their respective owners. Thorsten Muschler GmbH
does not accept any liability for the content of linked websites.