Used Pressure Vessels for sale (14,404)

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions Bedpfxofzrapo Ab Uelf The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Bljdpfx Absfz A D Ns Uof Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: not inspected (used), Year of construction: 2020, operating hours: 4,809 h, functionality: unexamined, operating pressure: 2,500 bar, overall weight: 2,030 kg, rotational speed (min.): 650 rpm, rotational speed (max.): 1,800 rpm, water tank capacity: 80 l, TECHNICAL DETAILS Working pressure: 600 - 2,500 bar Flow rate: 9 - 26 l/min Blodpfjyx Uwuox Ab Uof Drive power: 160 kW / 132 kW motor Speed range: 650 - 1,800 rpm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,240 x 1,550 x 1,780 mm Total weight: 2,030 kg Input voltage: 400 V Power connection: 400 V / 50 Hz Fuse protection: 250 A Operating pressure water inlet: 2.0 - 8.0 bar Max. inlet temperature: +40 °C Water tank capacity: 80 l Pump speed range: 220 - 610 rpm Engine oil capacity: 10 l Noise level: 75 dB Operating hours: 4,809 h EQUIPMENT High-pressure pump with frequency converter (continuous operation 24 h/day) Standard accessories

Condition: used, Used Becomix model Beco Mini RW 2.5 lab scale homogenising mixer.  Manufacturer: Becomix. Capacity: Working capacity 0.5-3.5L. Dimensions: 800mm x 800mm x 900mm high. Also includes: -Integrated CIP system. -Agitator with scrapers. -Intuitive touch panel PLC control.  -Compact device with tempering unit. -Vacuum pump. - PLC control integrated into a mobile table. Bljdpfx Asyx Ibgjb Uof -Mixing vessel full vacuum to 1 bar, double jacket 4 bar.

Condition: new, Unused Joshua Greaves stainless steel vertical process vessel. Approximately 1,000 litre working capacity. Unit has bolted dished top and welded dished bottom. Internal rated atmospheric design pressure at 80 deg.c. Stainless steel external jacket rated 3.5 bar design pressure at 80 deg.C. Unit has a top mounted anchor agitator driven by a 1.5kW, 1461rpm motor and off-set general purpose high shear agitator driven by a 7.5kW, 2890rpm motor. Unit includes (1) ICS Cool Energy iC 220 50Hz water chiller and (1) ICS Cool Energy i-Temp ci 90t9 50Hz water chiller . Unit also includes an Alfa Laval rotary lobe feed pump. Unit is mounted on (4) stainless steel legs. Bodpfx Asyx Ibmsb Uelf

Condition: good (used), Contact pressure gauge, pressure switch, pressure gauge, test pressure gauge, differential pressure switch, pressure switch, low pressure switch -Manufacturer: VDO, contact pressure gauge 0 - 400 bar -Voltage: up to 380 V -Switching capacity: 30W 50VA -Quantity: 1x pressure gauge available Bjdpfx Ajyffm Eeb Ujlf -Dimensions: 220/210/H140 mm -Weight: 1.8 kg

Condition: used, tank capacity: 500 l, GENERAL INFORMATION Construction type: upright Remarks: Slight variations in the design of the containers, e.g., 2 containers are mobile on castors, the rest are on fixed V2A frames; maximum pressure in some cases up to 3 bar; variations in the connections on the manhole cover; overall height is in part slightly lower (depending on the connections on the manhole cover) Inner diameter: 800 mm Total height: 1,780 mm Max. overpressure: 2.5 bar Support type: Frame Location: Bremen Nameplate: Volume: 500 liters Product-contact material: V4A 1.4435 (AISI316) Condition: Used Previous application: Pharmaceutical EQUIPMENT Manhole / Dome: on the top head (DN 400) Outlet: present MATERIAL SPECIFICATION External surface: ground Bedpfxoxqc Hrs Ab Ujlf Internal surface: ground

Condition: used, tank capacity: 10,500 l, GENERAL Features: Spray head, crane lugs Design: vertical Remarks: 1 stainless steel sheet inside at the bottom (see photos); Wall thickness of the lowest cylinder segment: 3 mm Internal diameter: 1,500 mm Total height: 6,800 mm Max. overpressure: 1.5 bar Support design: height-adjustable feet Location: Bremen Technical documentation: drawing, TÜV certificates, various documents Nameplate: Volume: 10,500 liters Bedpfx Aexqcn Njb Uelf Cylinder wall thickness: 2.5 mm Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 5,500 mm Previous use: brewery TANK Max. permissible operating temperature: 20 °C Number of feet: 3 pcs EQUIPMENT Manhole / dome: in cylinder (approx. 350 x 450 mm) Outlet: DN80 DIN 11851 Note: pressure marks on the cylinder MATERIAL SPECIFICATION Feet material: stainless steel TECHNICAL DATA / DIMENSIONS Wall thickness bottom: 2.5 mm Wall thickness top: 2.1 mm

Condition: used, tank capacity: 13,700 l, GENERAL Features: Disc valve, spray head, crane lugs Design: vertical Remarks: Cone height approx. 1,300 mm Internal diameter: 2,600 mm Total height: 4,650 mm Heating/cooling: available Max. allowable operating temperature: 2 °C Max. allowable operating overpressure: 3.0 bar Max. overpressure: 1.0 bar Support type: Height-adjustable feet Location: Bremen Technical documents: Drawing Cylinder tempering: Rectangular half-pipe coil Name plate: Volume: 13,700 liters Volume double jacket: 40.0 liters Wall thickness cylinder: 3 mm Product-contact material: V4A 1.4571 (AISI316) Condition: used Blodpsxqcptsfx Ab Ujf Cylindrical height: 1,800 mm Previous application: Yeast tank in a brewery TANK Max. allowable operating temperature: 20 °C Bottom: Conical bottom Number of feet: 4 pcs EQUIPMENT Manhole / access hatch: on top (DN 400) Outlet: DN65 DIN 11851 MATERIAL SPECIFICATION Material tempering system: V2A 1.4301 (AISI304) Feet material: Stainless steel TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 4 mm

Condition: used, tank capacity: 1,175 l, GENERAL Equipment: Spray head, crane lugs Design: vertical Internal diameter: 1,000 mm Total height: 2,050 mm Heating/Cooling: available Max. permissible operating temperature: 50 °C Max. permissible operating overpressure: 3.0 bar Max. overpressure: 2.50 bar Bjdpfx Abjxqcqds Uolf Support type: height-adjustable feet Location: Bremen Technical documentation: drawing Cylinder temperature control: Thermoplate Nameplate: Volume: 1,175 liters Double jacket volume: 7.0 liters Double jacket material: V2A 1.4301 (AISI 304) Product-contacting material: V2A 1.4301 (AISI 304) Condition: factory new Cylindrical height: 1,250 mm VESSEL Max. permissible operating temperature: 50 °C Number of feet: 4 pcs HEATING/COOLING JACKET Bottom heating/cooling: Thermoplate EQUIPMENT Manhole / Access hatch: on cylinder Outlet: DN50 DIN 11851 MATERIAL SPECIFICATION Surface outside: ground/polished Surface inside: ground/polished Feet material: stainless steel

Condition: used, tank capacity: 1,600 l, GENERAL Construction type: horizontal Remarks: 4 stainless steel feet, bolted to 4 stainless steel base plates; manhole DN 400; slight metallic discoloration inside; further technical documentation available External diameter: 1,060 mm Internal diameter: 900 mm Total height: 2,100 mm Total length: 2,700 mm Insulation: available Max. overpressure: 2.0 bar Mounting type: feet Location: Bremen Technical documentation: drawing Nameplate: Vacuum: 1.0 bar Volume: 1,600 liters Cylinder wall thickness: 4 mm Product-contact material: V4A 1.4435 (AISI316) Condition: used Last application: pharmaceutical chemicals VESSEL Max. permissible operating temperature: 95°C Number of feet: 4 pcs INSULATION Insulation jacket: riveted Insulation jacket material: aluminum EQUIPMENT Manhole / dome: on the vessel Outlet: flange DN65 Note: dents on the insulation jacket, manhole cover missing MATERIAL QUALITY Bedpfxoxqc Eze Ab Uolf Feet material: stainless steel TECHNICAL DATA / MEASUREMENTS Bottom wall thickness: 4 mm

Condition: used, tank capacity: 1,235 l, GENERAL Design: Container Remarks: Pneumatic butterfly valve; welded piping inside the tank (see photos); cone height approx. 530 mm; minor differences in individual tank design possible Internal diameter: 1,200 mm Total height: 2,150 mm Max. overpressure: 0.5 bar Support type: Feet Location: Bremen Technical documentation: Drawing, various documents, operating manual Nameplate: Vacuum: 1.0 bar Volume: 1,235 liters Cylinder wall thickness: 4 mm Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 660 mm Bedpfx Ajxqc Iiob Uslf Previous application: Pharmaceutical TANK Max. permissible operating temperature: 100 °C Lower head: Conical bottom Number of feet: 4 EQUIPMENT Manhole / Dome: in the top head (DN 400) Outlet: 250 mm MATERIAL SPECIFICATION Foot material: Stainless steel TECHNICAL DATA / DIMENSIONS Head wall thickness: 4 mm

Condition: used, tank capacity: 130 l, GENERAL Design: vertical Remarks: Handhole diameter approx. 150 mm; immersion tubes inside the tanks; some minor dents Internal diameter: 508 mm Total height: 1,000 mm Max. overpressure: 3.00 bar Location: Bremen Technical documentation: Drawing Nameplate: Vacuum: 1.00 bar Volume: 130 liters Bodpfxexqc Nyo Ab Uelf Cylinder wall thickness: 2.5 mm Product-contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 488 mm Previous application: pharmaceutical industry VESSEL Max. permissible operating temperature: 200°C EQUIPMENT Manway / Dome: handhole Outlet: not available TECHNICAL DATA / DIMENSIONS Head wall thickness: 2.5 mm

Condition: used, tank capacity: 1,540 l, GENERAL INFORMATION Equipment: Spray head Design: vertical Remarks: Homogenizer mounted on the bottom (see photos) is included in the scope of delivery Heating/cooling: available Insulation: available Max. permissible operating overpressure: 6.0 bar Max. overpressure: 3.0 bar Agitator: propeller Agitators: 2 agitators Agitator type: anchor agitator Location: external storage Cylinder temperature control: double jacketed Nameplate: Volume: 1,540 liters Double jacket volume: 100.0 liters Product-contact material: V2A 1.4301 (AISI 304) Condition: used Previous application: pharmaceutical TANK Max. permissible operating temperature: 200 °C Support style: height-adjustable legs Number of legs: 3 pieces INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Bjdpfxsycirge Ab Uelf Manhole/dome: on the upper head AGITATOR Agitator mounting: on the tank Agitator equipment: Scrapers are mounted on the anchor agitator (see photos) AGITATOR 2 Agitator mounting: on the tank

Condition: used, tank capacity: 1,000 l, GENERAL Equipment: Butterfly valve Design: Container Remarks: DN 100 handhole in the top head (in some cases the union nut is missing); minor dents possible in some units Internal diameter: 1,000 mm Blodpfx Aboyciy Dj Usf Overall height: 1,850 mm Max. overpressure: 2.0 bar Location: 26 x Bremen, 49 x external warehouse Technical documentation: Drawing Nameplate: Volume: 1,000 liters Cylinder wall thickness: 2 mm Product-contact material: V2A 1.4301 (AISI304) Condition: Used Cylindrical height: 965 mm Last application: Food industry TANK Max. allowed operating temperature: 130 °C Base type: Frame Number of feet: 4 units EQUIPMENT Outlet: DN50 DIN 11851 MATERIAL PROPERTIES Foot material: Stainless steel TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 2.5 mm Top wall thickness: 2 mm

Condition: used, tank capacity: 930 l, GENERAL Equipment: Butterfly valve Design: Container Notes: 2 different manway cover variants: milk pipe screw connection (125mm handhole cover) or bayonet closure (400mm manhole) (drawing available) Special tooling is required for opening the handholes and manholes. On request, we can provide contact information for the relevant manufacturers or assist with procurement. Internal diameter: 1,000 mm Total height: 1,760 mm Max. overpressure: 1.0 bar Location: external storage Technical documentation: drawing Nameplate: Vacuum: 0.4 bar Volume: 930 litres Cylinder wall thickness: 2 mm Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 940 mm VESSEL Max. permissible operating temperature: 130 °C Bodpfx Asycizueb Uslf Base type: Frame EQUIPMENT Manhole / dome: in the top section (DN 400), handhole Outlet: DN50 DIN 11851 TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 2.5 mm Top wall thickness: 2.5 mm

Condition: used, tank capacity: 1,000 l, GENERAL Equipment: Disc valve Design: Container Remarks: 4-legged frame made of V2A; 1 dent in cylinder/top head transition Internal diameter: 1,000 mm Total height: 1,950 mm Max. overpressure: 1.0 bar Location: Bremen Nameplate: Volume: 1,000 liters Product-contact material: V4A 1.4401/04 (AISI316) Blsdpfeyckx Ijx Ab Ujf Condition: used Cylindrical height: 960 mm Previous use: Pharmaceutical TANK Max. permissible operating temperature: 50 °C Support design: Frame Number of legs: 4 pcs EQUIPMENT Manhole / Dome: in top head (DN 400) Outlet: DN50 DIN 11851 MATERIAL SPECIFICATION Leg material: Stainless steel

Condition: used, tank capacity: 600 l, GENERAL Equipment: Disc valve Design: Container Remarks: Some larger residual fruit pulp on the interior Internal diameter: 790 mm Total height: 1,740 mm Max. positive pressure: 1.0 bar Location: Bremen Nameplate: Vacuum: 0.15 bar Volume: 600 liters Product-contact material: V2A 1.4301 (AISI304) Condition: Used Cylindrical height: 1,030 mm Previous use: Food TANK Base type: Feet Number of feet: 4 EQUIPMENT Manhole / Access port: in the top head (DN 400) Outlet: DN50 DIN 11851 Note: Light residue, signs of use Blsdpeyckm Eefx Ab Usf MATERIAL SPECIFICATION Feet material: Stainless steel

Condition: used, tank capacity: 180,000 l, GENERAL Equipment: Crane lugs Design: suspended Outer diameter: 4,500 mm Inner diameter: 4,100 mm Total height: 17,000 mm Heating/cooling: available Insulation: available Max. permissible operating temperature: 20°C Max. overpressure: 1.5 bar Location: Outdoor storage Technical documentation: Drawing Cylinder temperature control: Half-pipe coil Nameplate: Volume: 180,000 liters Double jacket volume: 1,462.0 liters Condition: used Cylindrical height: 12,000 mm Last use: beer tank Bedpfxjxqcnij Ab Ujlf VESSEL Max. permissible operating temperature: 18°C Bottom: conical bottom EQUIPMENT Manhole / dome: in the upper head Outlet: available

Year of construction: 2011, condition: used, tank capacity: 1,100 l, GENERAL Equipment: Level indicator (without guarantee), disc valve, spray head, crane lugs Design: upright Year of manufacture: 2011 Notes: Exhibition tank - slight signs of use; yeast plug installed inside Outer diameter: 1,200 mm Inner diameter: 1,000 mm Total height: 2,580 mm Heating/Cooling: available Insulation: available Max. permissible operating temperature: 50 °C Max. permissible operating overpressure: 6.0 bar Max. overpressure: 3.00 bar Support type: feet Location: Bremen Technical documentation: drawing, TÜV certificates, CE marking and declaration of conformity, operating instructions Cylinder temperature control: thermoplate Nameplate: Volume: 1,100 liters Blodpsxqcp Hsfx Ab Ujf Double jacket volume: 10.0 liters Double jacket material: V2A 1.4301 (AISI 304) Product-contact material: V2A 1.4301 (AISI 304) Condition: unused Cylindrical height: 1,000 mm TANK Max. permissible operating temperature: 50 °C Bottom: conical floor Number of feet: 4 pcs INSULATION Insulation jacket: hermetically welded Insulation material: mineral wool Insulation jacket material: stainless steel Insulation thickness: 100 mm FEATURES Manhole / access: in cylinder Outlet: DN40 DIN 11851 MATERIAL SPECIFICATION Internal surface: high-gloss Feet material: stainless steel

Condition: used, tank capacity: 750 l, GENERAL Design: vertical Remarks: Top head made from 1.4541 (V2A); metallic discolorations inside the vessel; manhole in the top head with 350 mm diameter External diameter: 900 mm Internal diameter: 790 mm Total height: 2,150 mm Heating/cooling: available Insulation: available Max. permissible operating temperature: 135 °C Max. permissible operating overpressure: 2.5 bar Max. overpressure: 2.50 bar Support type: height-adjustable legs Location: Bremen Cylinder temperature control: double jacket Nameplate: Volume: 750 liters Double jacket volume: 80.0 liters Double jacket material: V2A 1.4301 (AISI304) Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 1,230 mm Previous application: pharmaceutical industry VESSEL Blodpfx Ajxqc I Aeb Ujf Max. permissible operating temperature: 135 °C Number of legs: 3 pieces INSULATION Insulation jacket: bolted Insulation jacket material: stainless steel EQUIPMENT Manhole / dome: in the top head Outlet: DN50 DIN 11851 Note: slight adhesions, pressure marks on the insulation jacket MATERIAL PROPERTIES Material of legs: stainless steel

Condition: used, tank capacity: 2,600 l, GENERAL Equipment: Spray head, crane lugs Design: vertical Remarks: Test pressure according to nameplate: 3 bar; 1 tank with 1 dent at the transition between cylinder and top head; also, one of the tank’s feet is slightly bent (see photos) Internal diameter: 990 mm Total height: 4,000 mm Location: Bremen Nameplate: Volume: 2,600 liters Product-contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 3,020 mm Previous use: cosmetics TANK Support type: legs Number of legs: 4 pieces EQUIPMENT Manhole/dome: in the top head (DN 400) Outlet: 32 mm Note: slight residues, outlet end cut off MATERIAL SPECIFICATION Bjdpsyckfhefx Ab Ujlf Material of legs: stainless steel

Condition: used, tank capacity: 80 l, 80 liter pressure tank made of V4A Bljdjyfwmkspfx Ab Ujf

Condition: used, tank capacity: 6,200 l, GENERAL Equipment: Lifting lugs Bledpeyciwcsfx Ab Uef Design: upright Outer diameter: 1,700 mm Total height: 3,400 mm Max. overpressure: 8.0 bar Location: Outdoor storage Nameplate: Volume: 6,200 liters Product-contacting material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 2,220 mm TANK Ends: Klöpper head Support type: Feet Number of feet: 4 pcs EQUIPMENT Manhole / Dome: in the cylinder Outlet: available Outlet: 40 mm MATERIAL PROPERTIES Feet material: Steel

Condition: used, tank capacity: 650 l, GENERAL Equipment: Crane lugs Design: Vertical Remarks: The tank was originally mobile on 4 plastic casters, which are no longer present; for stationary installation, the rollers either need to be replaced by the buyer or the feet must be adequately supported, as the lower base/outlet extends beyond the end of the feet External diameter: 1,120 mm Internal diameter: 1,000 mm Total height: 1,600 mm Heating/Cooling: available Insulation: available Max. permissible operating temperature: 148 °C Max. permissible operating pressure: 10.0 bar Max. overpressure: 1.70 bar Location: Bremen Cylinder temperature control: Double jacket Nameplate: Volume: 650 liters Double jacket material: V2A 1.4301 (AISI304) Product-contacting material: V4A 1.4401/04 (AISI316) Condition: Used Cylindrical height: 700 mm Last application: Pharmaceutical TANK Max. permissible operating temperature: 148 °C HEATING/COOLING JACKET Bottom temperature control: Double jacket Bljdexqc Nmopfx Ab Uof INSULATION Insulation jacket: Hermetically welded Insulation jacket material: Stainless steel EQUIPMENT Manway/Dome: In top head, handhole Note: Pressure marks on the insulation jacket, scratches inside Outlet: 35 mm MATERIAL SPECIFICATION External surface: Ground Internal surface: Ground Foot material: Stainless steel