Pressure vessel Stainless steel tank

10466

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 450x320 saw band length 4250x34x1,1 mm band speed 40 + 80 m/min table height 845 mm saw band width 34 mm total power requirement 2,2 kW weight of the machine ca. 0,985 t dimensions of the machine ca. 1,4 x 2,0 x 2,2 m Double miter band saw, hydraulic semi-automatic, DGS 350/450 HA-I · miter left + right 60° without machine conversion · 34 mm saw blade width · Large material support turntable, ball bearings · To position the saw blade guides using a very wide linear guide · Strong, robust transmission · Large chipboards · Infeed and outfeed roller Removable chip tray (disinfection) · Free-standing control panel, safe and ergonomic · Storage space for tapes, consumables Godpsfgyicjfx Afkett · Cutting pressure regulator Feed regulator · Fully hydraulic vise Preload super fast (front loading) · Material height sensor (automatic cut start detection) Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise Optimum, material-independent cutting result through fine adjustment of the saw frame by means of: *Pressure Control Valve (Cutting Pressure Force) *Feed Control Valve (Speed) *Switch with pictogram, easy and clear to use

Condition: used, gearing type: other, mileage: 1,001 km, driver cabin: other, Vehicle location: Bovenden, Body: MB, MAN, IVECO, VOLVO, SCANIA etc. used rear axles, 50x available! various used rear axles for 300,- to 1.500,- EUR per piece depending on condition ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Gtodpfxoth T Uqj Afkot - .

Condition: new, capacity 90 degrees: round 510 mm capacity 90 degrees: square 450 mm 650x450 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 5320 x 34 x 1,1 mm total power requirement 3,0 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 1,9 x 2,87 x 1,3 m Gsdpfx Asd Iipmofkstt PROMOTIONAL PRICE!!! 2-column double miter band saw K-tech DG 62/45 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to diagonal cutting, feed regulator + cutting pressure regulator • Solid material inlet roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to diagonal cutting • Control panel ergonomic, safe and free-standing • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large-sized wheels (520 mm) a. • Clear miter adjustment up to 60° Semi-automatic function: 1. Tension the material 2. Saw starts 3. Lowering in rapid traverse to the beginning of the material or the same for series cutting cut 4. Saw blade off 5. Raise the frame until it is just above the material 6. Vice opens

Condition: good (used), Year of construction: 1992, functionality: unexamined, overall weight: 18,000 kg, power: 250 kW (339.91 HP), For bulky waste, pallets, residual wood, etc. Single-shaft shredder with electrohydraulic drive Rotor width: 2500 mm Rotor diameter: approx. 500 mm Electric motor: 250 kW Gtjdjq I Rkdjpfx Afkjt

Year of construction: 1955, condition: used, Radial drilling machine, drilling machine, boom drilling machine Gsdpfxsd Enr Ij Afkjtt -Outreach: 2055 mm -Max. Distance from machine table to spindle mount: 1700 mm -Cone mount: MK5 -Motor power: 7.5 kW -Speeds: 11.2-1400 rpm -Columns: Ø 450 mm -Spindle stroke: 540 mm -Thread cutting device -automatic feed: 0.037-2.0 mm/rev -Clamping area: 920 x 1600 mm -Dimensions: 2580/1110/H3450 mm -Weight: 6465 kg

Condition: used, Year of construction: 2013, operating hours: 17,526 h, functionality: fully functional, overall weight: 29,900 kg, number of blades: 112, control cabinet length: 1,500 mm, rotor length: 2,800 mm, power: 2 kW (2.72 HP), rotational speed (max.): 112 rpm, The LINDNER POLARIS 2800 is a powerful, high capacity single shaft shredder that is primarily used for the shredding of waste with foreign parts – like for example pre-treated domestic waste, commercial and industrial waste, as well bulky waste etc. The resultant output material is an defined granulate which could be used direct for incineration. The POLARIS 2800 can be optimally adapted for different applications by individual configuration and equipment components. Gedpfx Afowhyygokott this machine was manufactured and had extensive repair work in 2016 £150k ex works uk

Year of construction: 2015, condition: refurbished (used), Overband plate magnet Version in VA 1.4301 tightly welded Godpfx Afod Dy U Rokott 620 x 420 x 200mm completely welded housing Ring eyelets for suspension

Condition: used, Opening: approx. 1600 x 1600 mm Rotor width: approx. 1600 mm Rotor diameter: approx. 560 mm Gjdpfoxgtdasx Afkjtt

Condition: used, Flash pasteurizer for pasteurizing liquid food products. With pumps, preheater and control unit mounted on a common frame. Designed for a capacity of 1000 liters/hour. Additional title: with pressure tank Capacity: 1000 l/h Compressed air: 6 bar for control air Gjdpow Tlq Hjfx Afkstt Operation / Control: HMI on switch cabinet Base construction: mounted on frame Features: 2 x Alfa Laval plate heat exchangers, 2 x centrifugal pumps, pressure compensation tank, sight glass, temperature and pressure sensors, various other fittings and valves, HMI

Condition: good (used), Year of construction: 2013, operating hours: 1,000 h, Beer Filler, Counterpressure, Vipoll GEA, Type: Visipraktik VKR-ES-DN 12-3K, Year: 2013, capacity max. 3.000 bph, adjusted to 330 ml, double pre-evacuation, low operating hours, less than 1.000 hours, bottle diameter 50 - 105 mm, bottle hight 125 - 370 mm Optional: Set of bottle conveyors, rotating table Gtedpfx Aoq H Eamofket