Used Fume Suction System for sale (38,738)

Condition: used, Documentation Multievacuator Additional information Pneumatic conveyor belt. Suction operation for powders or granules. The Multi-evacuator unit is a combination of blower and cyclone, designed for the suction of granular materials. The upper part, containing the impeller, can be opened for easy cleaning and replacement of the cyclone filter basket. The fan creates the necessary vacuum to draw the material from point A and discharge it through the cyclone via a rotary valve to point B, either directly or via a discharge line Capacity +/- 5 T/h depending on layout (see document). Motor: 3 kW Rodjzg Nakopfx Aa Iew Plan to provide a rotary valve. Available at extra cost.

Condition: used, Welding fume extraction, filtration unit, dust extraction by LINCOLN NORWELD Central extraction system, extraction plant, silo filter, cartridge filter, pulse jet filter, dedusting filter Type FU-80-A Serial no. 001799 Year of manufacture: 1996 Airflow rate max. 6000 m³/h (depending on fan capacity) Filter area 80 m² (4 units of 20 m² each) Extraction inlet at filter entry Ø 250 mm Exhaust outlet at filter exit Ø 250 mm Compressed air connection 4 bar - without fan, without filter control - Filter category C, 99.9% separation efficiency - Pneumatic filter cleaning - Filter inlet with pneumatic shut-off valve - 4 used filter cartridges, Ø 325 mm, length 1200 mm - Service access hatch 240 x 240 mm Space required (L x W x H): 1400 x 1600 x 2970 mm Weight: approx. 300 kg In good condition Redpjxf Up Iefx Aa Isw

Condition: used, Ex-protected filter unit, extraction system, central extraction cartridge - impulse filter P. RIES GmbH Type 330 D ATEX Cartridge filter system, rectangular filter unit, central welding fume extraction Machine no. 10011932 Year of manufacture: 2020 - as new, unused Airflow rate: 3,300 m³/h Airflow rate: 0.9 m³/sec Filter area: 20 m² (1 piece cartridge filter) Differential pressure: 3,300 Pa (33 mbar) Extraction connection at filter inlet: 2x Ø 150 mm Exhaust connection at filter outlet: sound insulation hood Compressed air connection: approx. 8 bar Motor power: 3 kW Mains connection: 400 Volt, 50 Hz - Explosion-protected design ATEX II 2Db 125°C / 3G T4 - Pneumatic rotating filter cleaning, manual via push button Redpfey N Duqsx Aa Isw - Manometer for differential pressure display (vacuum display in mbar) - Service door for filter replacement - Filter stage 1 = 1 cartridge filter Ø 325 mm, length 900 mm P-RIES, type cartridge filter 20.1 m², BGIA/IFA class M, antistatic - Filter stage 2 = filter outlet (sound insulation hood) equipped with 9 activated carbon filter cartridges, type AKZ 2500V, 266 m³/h per filter cartridge - Built-in radial fan, type IE 3-premium efficiency, 12% improved efficiency - Robust steel construction in RAL 7035 light grey, antistatic powder-coated - Dirt collection container as pull-out drawer approx. 70 litres (440 x 530 x 300 mm) - EC Declaration of Conformity, operating instructions with wiring diagram available Required space (L x W x H): 670 x 700 x 2430 mm Weight extraction unit: 211 kg Transport dimensions on pallet (L x W x H): 930 x 1350 x 1950 mm Weight incl. transport pallet: 236 kg As new, unused, ex stock

Year of construction: 2023, condition: used, functionality: fully functional, machine/vehicle number: SN-22-1409, For sale is a high-quality extraction system from the brand Absaugwerk, year of manufacture 2023, specifically designed for the collection and filtration of welding fume (e.g. aluminum dust). The system meets the latest technical standards and includes: Equipment: • Extraction table with downward extraction • Integrated wet separator in line with the latest safety standards • Suitable for professional welding applications • ATEX-compliant (Zone 2, Ex II 3G) • Power: 4.0 kW / 400 V / 50 Hz • Condition: almost as new, fully functional Collection by buyer. Assistance with dismantling/transport can be arranged if required. If you are interested or have any questions, please feel free to send me a message. On-site inspection by appointment is possible. More metalworking machines available, such as bench drill presses, press brakes, column drill presses, eccentric presses, heavy-duty racking, welding tables, MIG/MAG welding units, compressors, etc. – please check my other listings. Domestic price net plus VAT or Net export price Pick-up only – dismantling and transport by buyer or by arrangement. Rodex Da Tiopfx Aa Ijw If you are interested or have any questions, please feel free to send me a message. More photos and technical details available on request. All information provided without guarantee or warranty. Subject to errors and prior sale. For further questions, please call. Nous parlons Francais / Мы говорим по русски We speak English / Noi vorbim româneste Viber / WhatsApp / Skype For an additional fee, we handle all customs and registration formalities. We transfer vehicles to the port for an extra charge.

Year of construction: 2002, condition: ready for operation (used), total width: 2,500 mm, total height: 8,400 mm, product length (max.): 2,250 mm, Dust extraction system manufactured in 2002. This LBH Suction system features a robust radial fan with a motor power of 22 kW and an impressive air flow rate of 13,750 m³/h. The filter area is 155 m², ensuring efficient dust removal with a residual dust content of less than 0.2 mg/m³. If you are looking to get high-quality dust extraction capabilities, consider the LBH Suction system we have for sale. Contact us for further details. Rsdpfx Aaoyn Nn Ej Ijw • Return air/exhaust air (technical data): • Duct cross-section: 700 x 700 mm • Return air velocity: 7.5 m/s • Exhaust air velocity in workshop:

Condition: used, Extraction system, central extraction, room air filter system, ETS Efficient Technical Solutions GmbH Central welding fume extraction system Year of manufacture approx. 2005 Volume flow rate approx. 5000 m³/h Extraction connection at the filter inlet 1200 x 150 mm Exhaust connection at the filter outlet 400 x 300 mm Motor power 10 kW Mains connection 400 volts, 50 Hz - Control cabinet for wall mounting - Bag filter - Maintenance flap for filter replacement - Radial fan on top of the system Space requirement L x W x H 2000 x 1650 x 3650 mm Transport height without fan 3100 mm Weight approx. 2000 kg Rsdsicic Hepfx Aa Iow Very good condition

Condition: used, Welding fume extraction unit for wall mounting, KEMPER extraction device Type 85400 Serial number: 279092 Year of manufacture: 1997 Volume flow: 1700 m3/h Static pressure: 2000 Pa Extraction connection: Ø 250 mm Motor power: 1.5 kW Power supply: 400 Volts, 50 Hz - Radial fan - Designed for a mechanical air filter with approx. 99% separation efficiency - Main filter defective (surcharge for new main filter: EUR 195 net) - Articulated extraction arm Ø 150 mm, approx. 2 meters long - Extraction pipe with 3 joints and extraction hood (adapter connection to filter housing missing) - No external control unit, without filter monitoring, without start switch - Air outlet: 250 x 140 mm Rsdpfx Aaeu S Tfgs Iew Required space (L x W x H): 680 x 660 x 1100 mm Weight: approx. 120 kg Good condition Surcharge for new main filter: EUR 195 net

Condition: ready for operation (used), Year of construction: 2019, Two Ivat filter towers for dust and smoke with temperature control and nanofilter are available. Air volume flow: 22000-25000m³/h, motor power: 18.5kW, max. separation efficiency: 99.95%, filter area: 120m², filter cartridges: 4, machine dimensions X/Y/Z: approx. 2000mm/1500mm/3000mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible. Rjdpfxsyvuvlo Aa Iow

Condition: used, functionality: unexamined, machine/vehicle number: V250 (Bofa) | WLA250 (Weidinger), input voltage: 230 V, Used solder fume extraction units from Bofa & Weidinger Model: V250 (Bofa) | WLA250 (Weidinger) Voltage: 230V (50Hz) | 1.1A Including power cable. Rodpfxexp H Tts Aa Iew

Condition: new, Year of construction: 2025, functionality: fully functional, Our powerful "MM 2010" sandblasting cabinet uses a pressure blasting process and, thanks to its innovative media recirculation system, is suitable for all types of blasting media. Thanks to the bucket elevator permanently connected to the cabinet, even the heaviest types of blasting media, such as stainless steel, cast steel, and other metallic media, can be used without any problems. Unlike competing systems, the blasting media is not sucked back into the cabinet, but rather transported to the adjacent bucket elevator via a flat conveyor system. The bucket elevator conveys the material upwards and throws it into the cyclone separator, where the blasting media is cleaned and returned to the blasting process. Our specially developed media recirculation recycling system ensures continuous media flow, regardless of the extraction system's suction power. Thanks to the media recirculation system and the innovative fan technology, the blasting cabinet has very low energy requirements (0.75 kW fan motor). Since the blasting material is not sucked back in, no oversized extraction system with high power consumption is required (as with many competitive systems). Rodpfxjwc Nrno Aa Ijw To achieve maximum blasting performance, the "MM 2010" pressure blasting cabinet is equipped with a 60-liter pressure blasting tank. This is equipped with a pressure regulator for continuously adjusting the blasting pressure from 0.1 to 12 bar. For safe operation, a water separator is permanently mounted on the blasting tank, protecting the blasting media from moisture. The pressure blasting nozzle is made of highly wear-resistant boron carbide and allows a service life of up to 1,000 hours, depending on the blasting media used. The blasting chamber is equipped with a wear-resistant rubber lining, which increases the service life of the blasting media and protects the blasting cabinet from wear. An air blow gun is installed for cleaning the blasted workpieces and blowing off the cabinet walls. The permanently installed cartridge filter extraction system ensures optimal visibility in the blast chamber and maximum abrasive service life. The extraction system features continuous cleaning of the filter cartridges using compressed air blasts. This ensures a long service life of the filter media and consistently consistent extraction performance. The blast chamber is loaded via an angled front flap that swings completely upwards. This allows the blast cabinet to be loaded using a forklift or crane. The sturdy work grate can support a maximum load of 500 kg. To ensure optimal visibility in the blast chamber, two powerful and energy-saving LED lights are mounted on the cabin roof. Their roof-mounted design protects them from dust and wear. The system is operated via a modern touchscreen display. To ensure safe operation of the blast cabinet, the blast cabinet is equipped with a door safety switch. The installed viewing windows are made of toughened safety glass and are provided with a wear-resistant film.

Condition: good (used), Year of construction: 2003, Extraction unit as tabletop unit working area approx. 620 x 360 x 450mm large drawer to collect the sucked material Rodeiwgbtspfx Aa Iew Control unit RE 1.5 for 5 different blower levels

Year of construction: 2022, operating hours: 427 h, condition: like new (used), functionality: fully functional, The extraction unit is from 2022 and has only 427 operating hours. It is therefore immediately ready for use and in excellent condition—see pictures. The price is gross (3,500 EUR net); you will receive an invoice with VAT shown separately. The mobile LOCTITE extraction system LAS 250 is a key component for health and environmental protection at the workplace. Molecules released by adhesives in their liquid phase are captured directly at the workstation, cleaned by the extraction unit via a special activated carbon filter system, and then the purified air is returned to the workspace. This reliably prevents air pollution in the work area and ensures compliance with workplace air quality regulations. Thanks to its low weight and mobility, the LOCTITE extraction system can be easily transported to different workstations. Rsdjxy Spzopfx Aa Ijw Features: - Special fan with high pressure reserve - Adjustable flow volume control - Suitable for up to 4 workstations - Filter combination with special activated carbon - Filter cartridges are recycled upon return - Built-in operating hour counter to monitor filter element life

Condition: new, Year of construction: 2025, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: Rjdpfxsdrtals Aa Ijw a) 1 cartridge dry filter, type PF 2.16.B250 for 30,000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve or rotary valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of filter cartridge cleaning. Maintenance doors as swing doors Maintenance easy.

Year of construction: 2025, condition: new, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: a) 1 cartridge dry filter, type PF 1.4.B62.00 5000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of the filter cartridges - cleaning. Redpelxyhfsfx Aa Iew Maintenance doors as swing doors Maintenance easy.

Condition: ready for operation (used), Year of construction: 2009, A wood dust extraction and filtration system Krämer for saw lines is available. 1) Wood dust extraction unit Krämer VKA-P 100/650/55, air volume flow: 27000m³/h, pressure increase: 3800Pa, motor power: 55kW, V-belt length: 3550mm. 2) Filtration unit Krämer GFS Shake 160/25/250, filtration capacity: 30000m³/h, filter material: polyester needle felt, material discharge: TFS40/10/1.1. 3) Fan Krämer VFM-R 45/250/3, air volume flow: 3000m³/h, pressure increase: 2500Pa, motor power: 3kW. 4) Fan Krämer VFM-P 42/200/4, air volume flow: 2500m³/h, pressure increase: 3000Pa, motor power: 4kW. 5) Separator tank/filter hopper Krämer. 6/7) 2x axial fans. Including pipes and peripheral equipment. The motor flange on the discharge motor is defective. Documentation available. An on-site inspection is possible. Rsdpfx Aasxl Elgj Iow

Year of construction: 2014, condition: ready for operation (used), A mobile extraction and filter unit Höcker is available. Filter class: H3, motor power: 4kW, suction connection: 200mm, filter surface area: approx. 12m², max. volume flow: 3400m³/h, max. negative pressure: 2700Pa, collection container volume: 350l, machine dimensions X/Y/Z: approx. 2000mm/1100mm/2000mm, weight: approx. 420kg. On site inspection is possible. Redpoyg Nu Nsfx Aa Iew

Condition: good (used), Year of construction: 2014, Includes existing spare filters. Air volume 8000 m³/h Electronic connection value: 1.5 kW 400 V/50 Hz Width: 2000 mm Height: 1650 mm Depth: 1000 mm Weight approx. 120 kg Rodpfx Ajx Uz A Aea Isw

Condition: used, Year of construction: 2016, Overview This tray former and case sealer packaging module was manufactured in 2016 by Denmark SOCO SYSTEM A/S. The system consists of an automatic tray former and a case sealer designed for fully automated carton handling in packaging lines. The tray former erects flat carton blanks into trays, which are transferred via conveyor to downstream processes, while the case sealer applies self-adhesive tape to close cartons after filling. Technical data  - Capacity: 12 – 14 cycles/min (tray former) - Application: Carton forming and sealing - Configuration: Automatic tray former with pneumatic forming system and automatic case sealer with tape sealing - Utilities: - Voltage: 3 × 400 V - Frequency: 50 / 60 Hz (tray former), 50 Hz (case sealer) - Air consumption: approx. 31.3 Nl/cycle (tray former), approx. 0.6 Nl/cycle (case sealer) Rodpfxsyxxxvs Aa Iow - Air pressure: 0.6 – 1.0 MPa - Rated current: 2 A (tray former), 3 A (case sealer) Scope of Delivery  - Tray former | SOCO SYSTEM A/S | BE 2200 ATS R | 2016 | Automatic tray former with pneumatic forming system and HMI control - Case sealer | SOCO SYSTEM A/S | T-402 | 2016 | Automatic tape case sealer with conveyor integration

Condition: used, Year of construction: 2012, Overview  This complete brewhouse was manufactured in 2012 and enables the production of 1,000-liter brews. The system works with steam and includes brewing, fermentation and storage tanks. It is immediately available and is currently installed and ready for operation in the production facility. The seller confirms that the system has worked perfectly until recently. The boilers have a copper coating, while the rest of the system is made of stainless steel. Details - Wort yield: 1,000 liters per brew - Heating system: Steam - Current status: Installed and ready for operation - Availability: Immediately Scope of delivery  Rodpfx Aaov Da Dlo Iew - Brewhouse | Mini Brewery System | CI T 10 | 2012 - 2 kettles (mash tun above the whirlpool as one unit + separate boiling kettle) - Steam boiler | Mini Brewery System | - | 2012 (electric) - Plate heat exchanger - Hot water tank | 1,500 L - Reverse osmosis system | ALFA | compact model | - - Capacity: 150-200 L/h - 4x Isobaric fermenter | Mini Brewery System | 1,000L | 2012 - 4x Horizontal isobaric maturation tank | DuoTank | 500 L | 2018 - Cooling jacket & bag system for optimum beer preservation

Condition: ready for operation (used), functionality: fully functional, A good used barcode verification system featuring twin belt drive with speed control - system was used for automatic labelling of the underside of boxes/cartons on a production line (label applicator was removed and sold) - barcode scanner is integrated to detect the presence of the label (which contained a barcode) and if no label detected the system alarms and stops - barcode scanning can be disabled if not required - setup currently for EAN 13 Barcodes and has Teach facility built in for new barcode or changeover Conveyor could also be used for Ink Jet Printing of underside of packs Could be refitted with your own label applicator also - mounting boss still in place for original Pago Applicator Single phase 240Volt AC supply Rjdpfx Aowufb Aoa Iew Ready to ship worldwide

Condition: used, table length 2400 mm table width 1200 mm table height 200 mm bore 28 mm 100 x 100 mm Rsdpszh N Udjfx Aa Isw material thickness ca. 24,5 - 27 mm 200 mm work height max. 850 mm Weight 980 kg Special item - The drill pattern on all side rails is offset downwards by approx. 1 mm. The clamping dimension for angle or table-to-table connection is not specified. >. - high-quality steel S355J2+N + plasma nitriding - Drill holes in side panel in diagonal grid - Corners, edges and drill holes bevelled 45 - Construction reinforced by ribs - incl. base basic equipment 650 mm

Condition: good (used), D&K Europa System B2 Laminator The machine is 100% operational and ready to use. This advanced, high-performance machine is ideal for commercial laminating. Technical specifications: Rodpfxszhkhxe Aa Ijw Max sheet size: 540mm x 740mm Min sheet size: 210mm x 220mm Min weight: 115 gsm Max weight: 400 gsm Operating temperature: 80-145°C Weight: 750 kg 380V power supply Chrome-plated steel cylinder Pneumatic clamping, separation, and automatic high-stack feeding. Sheet feeding accuracy: ±2.0mm. Touchpad for easy operation. Sheet straightening module. Sheet discharge jogger.

Condition: excellent (used), Here, we offer an ETSYSTEM electronic load with GPIB interface. Rsdpfx Aozd Uh Isa Isw 32615A AC & DC Electronic Load GPIB/RS232, 300V, 108A, 10800VA The 3260A series is a 300V high-performance AC and DC load in a single unit, offering an ideal test solution for UPS, AVR, and DC/AC inverters, especially for devices under test with step or square wave forms. Each AC&DC load in the high-performance series features its own control and display panel and a 5-status recall/memory storage, enabling more efficient load setup. The adjustable power factor setting (PF, range: 1, 0.85 ~ -0.85) expands the simulation of the test environment. The integrated GO/NG measurement device test function provides a quick diagnosis of test results for production and QC test throughput. Features: Voltage, current, power, and VA variable display. CC, linear CC, CR, and crest factor mode. GPIB/RS232 interface and 5 status recall/memory storage. Power factor (PF) adjustable: 1, 0.85 ~ -0.85. Upper/lower threshold capability. Protection against V, I, W, and ℃. Dual 4 1/2-digit display for voltage, current, power, and VA. Suitable for sine, square, and step waves. Width 600 mm, Height 1506 mm, Depth 600 mm 196 kg Type: 32615A AC & DC Electronic Load Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Used stainless steel container / transport container / IBC Last use: Solvent Item number: 10848 Volume: 800 liters Type: Vertical in galvanized stacking frame Material (wetted parts): 1.4301 / AISI304 Manhole 400mm Design: Single-walled Operating pressure according to type plate: 0.10 bar Empty weight: 213 kg Rodpfx Aaju Ngqte Isw Tank dimensions: Total width: 1020mm Total length: 1220mm Total height: 1400mm Height of the feet: 100mm Materials: Interior: 1.4301 / AISI 304 External parts: Galvanized steel Equipment: Type plate: yes Outlet diameter: 40mm Outlet valve: ball valve Distance drain to floor: 265mm

Condition: excellent (used), For sale: Professional automatic Vickers hardness tester Mitutoyo HV-100, made in Japan, in excellent technical and visual condition. The device is equipped with the AUTOVICK automatic measurement system and the Mitutoyo Vision Unit, enabling fast, repeatable and fully automatic hardness measurements without operator subjectivity. Rsdpfx Aaeyc H I Ss Isw Intended for measurement laboratories, quality control departments, manufacturing plants, automotive, aerospace, and toolmaking sectors. —— Key information • Measurement method: Vickers (HV) • Model: HV-100 (series HV-100B / HV-100C / 100D) • Load range: up to 100 kgf • Automatic AUTOVICK system • Integrated Mitutoyo Vision Unit • Automatic impression recognition and HV calculation • Made in Japan • Power supply: 230 V • Stable, heavy-duty laboratory construction —— Technical condition • Device operational and complete • Very good visual condition • Regularly used in an industrial environment • Last technical inspection: 2020 • Ready for immediate operation after connection —— Included in the set • Mitutoyo HV-100 hardness tester • Vision Unit (measuring camera) • AUTOVICK automatic system • Set of weights • Original accessories and holders • Transport cases with equipment • Original Mitutoyo documentation and manuals • Weight: 65 kg