Used welding smoke suction for sale (133)

Condition: good (used), Flexible extraction arm for welding smoke filter, welding smoke extraction -Welding fume extraction pipe: flexible -Tube: Ø 325 mm -Total length: 2300 mm -Transport dimensions: Ø 325 x 240 mm -Weight: 5.4 kg Dodpfx Afevck Hzsnjcc

Condition: used, Welding fume filter, welding fume extraction, exhaust gas filter system, exhaust gas filter system, exhaust gas filter, industrial exhaust gas filter, exhaust air purification system, filter cleaning system, filter system, filter block Dcjdpfepm Th Eox Afnjc -Manufacturer: Fischer Umwelttechnik, filter block exhaust air purification system type 4600 -Rated power: 2.2 kW -Individual components: see photos -Dimensions: 910/750/H2250 mm -Total weight: 226 kg

Condition: used, Blower filter device, welding smoke filter, welding smoke extractor, breathing apparatus Dcjdpfx Ajd Duvbofnec -filters -in the suitcase -with out battery -Dimensions: 420/165/H335 mm -Weight: 3.2 kg

Condition: used, Welding smoke filter, welding smoke extraction, soldering smoke extraction, small dust extractor -Esta: Small dust extractor OM-8 -Drive: 0.37 kW Dcodpsfkzbdefx Afnsc -Extraction arm: 3400 mm -Dimensions: 500/1330/H1550 mm -Weight: 76 kg

Condition: new, volume capacity 1600 m3/h feed volume 99,9 % length 3.000 Absaugschlauch mm motor 230 Volt motor 1,1 KW weight 80,0 kg range L-W-H 580 x 580 x 900 mm Description: The filtoo filter device newly developed by TEKA is a mobile filter system that many Tasks in the field of filtration of Smoking, dusts and gases can be used. Also suitable for high-alloy steels (stainless steel). (the device was based on DIN EN ISO 15012-1 (2005) tested and is IFA (formerly BGIA) certified (IFA No. 201020469/1140) for welding smoke class "W3" (degree of separation:> 99.9%)) Where can the SIG 230 filtoo be used? - at welding workplaces - in the workshop area - for soldering applications - with restorers - in locksmiths Djdpfx Aexaal Refnocc Furnishing: - BGIA - certified suction and filter system IFA 1005030 for suction to hochleg. Steels & non-ferrous metals - Operating instructions in German optional equipment for a surcharge (recommended) - Retrofit kit STAVO (dust pre-separation) - for FILTOO with spark protection and collecting tray Note : - The device is only used to extract dry dust / smoke - Read the operating instructions before using for the first time

Condition: new, Year of construction: 2024, functionality: fully functional, Complete module for supplying two two welding workstations with integrated integrated welding fume extraction system from Teka (welding fume extraction class W3, with automatic automatic filter cleaning) for steel. Mobile product. Small devices (Bosch, Makita or Milwaukee) can be attached to the holder (Fig. 4). Alternatively (for an extra charge), extraction systems from Nedermann, Kemper, Denios, Valco, Vaupel, Plymovent and other brands. Fully assembled including 1 frame 2 AGA 2020 extension arms 1 tool cabinet 1 gas cylinder holder 2 power dispensers 2 compressed air dispensers The welding workstation is suitable for TIG, MIG and MAG welding equipment from the companies: Fronius, Clos, Rehm, Migomat, Esab, Lorsch, Ideal, Kemppi and many more! The welding table shown in picture 5&6 can be purchased separately! Dodpfx Afsuud Ironscc At the moment we have one returned knife and one used welding workstation (SAP) available. - We look forward to your inquiry!

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 7024000257, type of input current: three-phase, overall weight: 1,500 kg, input voltage: 400 V, total width: 160 mm, total length: 290 mm, total height: 260 mm, volume flow: 7,000 m³/h, suction capacity: 7,000 m³/h, negative pressure: 2,500 Pa, compressed air connection: 6 bar, power: 11 kW (14.96 HP), input frequency: 50 Hz, input current: 50 A, control cabinet width: 50 mm, control cabinet length: 60 mm, control cabinet height: 75 mm, Equipment: type plate available, Camfil LC06-211 extraction unit. - BRAND NEW UNIT, unused, never installed - NEW FILTERS, filters are unused, the machine has zero operating hours and is new in transport packaging (see photos) Unit suitable for: welding fume, cutting fume, plasma fume, cutting dust, welding dust, grinding dust, plasma cutting, laser cutting applications. Extraction motor power: 11 KW Airflow: 7000 m3/h Max. negative pressure: 2500 PA Voltage: 400V Frequency: 50Hz Weight: 1200 kg Connection/suction diameter: Ø 350 mm Equipped with: - Complete documentation Dcjdeycwg Ejpfx Afnjc - CE certification - Electrical schematics & documentation - WEG electric motor Originally purchased for a Bystronic laser cutting installation, but never installed as such! For more information, viewings, or purchase, call or email!

Year of construction: 2000, condition: good (used), Stock number: 2739 Manufacturer: TEKA Year of manufacture: 2000 Type: PP-DC Number: 201320 Volume flow: 320 m³/h Max. Negative pressure: 22.000 Pa Dcodpfx Aomf Uzxofnoc Connection diameter: 50 mm Equipment: mobile, portable Accessories: hose 3.000 mm Connection: 1.2 kW 230 V Weight: approx. 40 kg Dimensions: 300 x 300 x 850 mm without hose

Year of construction: 2017, condition: excellent (used), Stock number: 2727 Dedelt Uinjpfx Afnscc Manufacturer: ESTA Year of manufacture: 2017 Type: KAF 100 Number: 16002366 Volume flow: 700 m³/h Max. Negative pressure: 1.100 Pa Connection diameter: 50 mm Equipment: mobile Accessories: see picture, among others laboratory suction arm connection: 0,55 kW 230 V Weight: 42 kg Dimensions: 485 x 485 x 920 mm without hose

Condition: excellent (used), Year of construction: 2018, suction capacity: 1,100 m³/h, negative pressure: 3,200 Pa, Welding fume extractor, dust extraction unit, Kemper self-cleaning, pneumatic, vacuum filter. Suitable for welding, grinding, and all types of dry dust. Self-cleaning welding fume filter with contamination-free dust collection. The mobile Kemper MaxiFil Clean cartridge filter is designed for continuous operation to filter welding fumes and high-concentration dusts. Suitable for use with all welding methods for carbon steel, low-alloy and high-alloy steels, as well as aluminum. Cost-effective in operation due to the long service life of the filter cartridge. With IFA-W3 certification, the standard version of the filter may be used for welding high-alloy steels. Specifications: Airflow capacity – 1,100 m³/h Maximum negative pressure – 3,200 Pa Three-phase fan motor – 1.5 kW Dsdpfetq E Siex Afnocc Filtration area – 15 m² Year of manufacture – 2018 PTFE-membrane cartridge filter Filtration efficiency – >99.97% Integrated start/stop delay timer. When connected to an optional start/stop sensor, the extraction delay time after completing the welding process can be set between 5-60 seconds. Stock no. – 1091

Condition: used, Year of construction: 1998, Technical details: total power requirement: 3,3 kw volume capacity: k.A. m³/h rated current: 14 - 15 / 8 - 8,5 A filter: Größe ca. B:660xT:1000xH:1060mm mm motor capacity: 3,3 kW weight of the machine approx.: 600 kg dimensions L x W x H: 1,45 x 0,8 x 2,0 m Dry separator with fan is sold as is. Built-in sheet steel construction Filter surface VARIO T 1.5 f=50 Hz Filter: 6 filter elements; dust extraction via container Ø 300 x H: 380mm Fan: Intake opening Ø 250 m; connected load 380V Dodevdczaspfx Afnecc Exhaust air opening via ceiling External operation (was integrated in a laser cutting system Trumpf) *

Condition: used, Year of construction: 1990, Technical details: total power requirement: 1,5 kw weight of the machine approx.: 110 kg electrics - voltage/frequency: 380 / 50Hz V/Hz dimensions L x W x H: 1,0 x 0,55 x 2,4 m Application: for welding and dust air with filtration Air inlet: pipe connection Ø 150 x 60mm; intake flexible pipe 2-sectioned Exhaust air: flexible hose Ø 150mm to approx. 5 meters Operation via on/off switch Dsdpfju Nv Dpex Afnecc *

Condition: used, Year of construction: 1988, Technical details: Dedpfju Nwitex Afnecc intake capacity: 1200 m³/h aspiration hole diameter: 230 mm total power requirement: 1,1 kW weight of the machine ca.: 110 kg dimensions of the machine ca.: 1,2x0,7x2,0 m mobile compact filtering device with suction arm length = 2800mm ( suction diameter 230mm) (tube dia160mm). 3 chamber fitering system application: smoke-and dust, such as welding smoke and skome filtration test run has been proceeded succesfully *

Condition: used, Technical details: Dsdpfx Aeu Nv Arefnscc pipe system - processing diameter: 200 mm pipe system - inlet: 200 mm volume flow ventilator - shred: 1200 m³/h electrics - voltage/frequency: 400/50 V/Hz filter cartridge type: Stahlwolle filter surface area: 450 x 450 mm total power requirement: 570 W weight of the machine approx.: 55 kg dimension machine xH: 0,55 x 0,9 x 0,83 m Dust mist suction and filter - Oil mist extraction system -suction Ø 300 x 90mm right side -exhaust air 430 x 300mm ceiling side -2x condensate drain 1 1/4" (blind plug) The Ultra Cleaner type UC 1 is suitable for direct extraction from machining centers using emulsion, with a machining chamber volume between 1 m³ and 4 m³. *

Condition: as good as new (ex-display), Year of construction: 2026, SRF master figure left 2 m suction arm Scope of application Low smoke and dust Sporadic usage Use Little run the extractor hood required Flexible by additional hose connection rear Dcsdpfx Aodqzbrofnoc Properties Safe operation through filter monitoring Extractor hood 360 degree rotating and swivelling Push handle and cable holder Procedure filter type disposable filter filter surface approx. 12 m² ᐳ 99% filtration efficiency 3-stage filter material glass fibre welding smoke off vagina class W3 Additional filter two prefilter basic data suction capacity Max 950 m ³/h diameter extraction arm Ø 150 mm length extraction arm 2 m diameter suction connection Ø 150 mm electrical connection 230 V / 50 Hz motor 1,1 kW sound pressure level 72 dB(A) dimensions (W x D x H) 705 x 655 x 900 m m weight approx. 71 kg

Condition: as good as new (ex-display), Year of construction: 2026, SRF Maxi. (Picture on the right) 3 m suction arm Scope of application Medium smoke and dust Regular usage Use Little run the extractor hood required Contamination free filter change Safe operation due to phase sequence detection High efficiency due to long Service life of the filter Properties Safe operation through filter monitoring Extractor hood 360 degree rotating and swivelling Automatic start/stop system (optional) Workplace lighting (optional) Dcedpfxsdqzcvo Afnec Technical data Procedure 2-speed Filter type disposable filter Filter surface approx. 20 m ² ᐳ 99% filtration efficiency Filter material of non-woven polyester Welding smoke off vagina class W3 Additional filter pre-filter (ALU knitted fabric) Basic data suction capacity Max 1,100 m³/h Extraction arm diameter Ø 150 mm Extraction arm, length 3 m Diameter suction connection Ø 150 mm -. Power supply 3 x 400 V / 50 Hz Motor 1,1 kW Noise level 70 dB(A) Dimensions (W x D x H) 790 x 815 x 1080 mm Weight 71 kg approx. 120 kg

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, type of input current: AC, overall weight: 45 kg, input voltage: 230 V, total width: 4,064 mm, total length: 7,366 mm, total height: 6,604 mm, filter area: 5 m², suction capacity: 180 m³/h, pressing: 36,000 Pa, power: 1.5 kW (2.04 HP), The device has seen little use and is in very good condition and fully functional. Specifications The ClearO2 W100 is designed to complement the 8XE MIG and 8XR MIG cobot extractors from Translas. With the combination of the welding fume burners of the 8XE MIG and 8XR MIG cobot extractors and the ClearO2 W100 devices, we capture between 90% and 98% of the welding fumes at the source and filter them with an efficiency of > IFA 99.8%. The compact device is perfect for relocation in the workplace due to its low weight - only 45 kg - and its four wheels, two of which are lockable. Automatic cleaning The ClearO2 W100 device has an automatic cleaning function by reverse compressed air pulse. As soon as the negative pressure in the filter is too high, the device automatically starts cleaning the filter. A manual cleaning function can be performed by pressing a single button. The automatic start/stop function to save energy and synchronize the device with the 8XE MIG and 8XR MIG Cobot extraction units is standard on the ClearO2 units. As soon as the gun is removed from the specially designed torch holder, the machine starts working automatically. Continuous duty motor The unit's electric motor is designed to work continuously without losing power. Thanks to the automatic cleaning function and simplified motor system, the maintenance of the unit is minimal, making it durable and time-saving. With a filter area of 5 m², this is one of the most efficient units of its size with the largest filter. The filter is disposable and has an active surface with an efficiency of: IFA >99.8%. Lightweight and mobile Dcedpfsvpgkcjx Afnjc The ClearO2 W100 units are designed to meet the needs of a single welder who needs to change his workplace. Examples of such applications include shipbuilding, wind tower construction, tank building and other similar manufacturing industries. The four wheels with two locks and the low weight - only 45 kg - allow the welder to easily move the device to the next work location. [Source: translas]

Condition: good (used), Welding smoke filter, welding smoke extraction, soldering smoke extraction, mobile filter unit, welding smoke extractor -Manufacturer: Kemper, mobile welding fume extraction -Drive: 1.1 kW -Volume flow: 1000 m³/h -Extraction arm: Ø 150 mm x 3260 mm -Machine dimensions: 710/655/H1400 mm Djdpfx Ajtvb Dxofnjcc -Weight: 130 kg

Condition: good (used), mobile welding fume filters, welding fume extraction -portable Djdpfeb A Ng Isx Afnecc -Extraction port: 1 -Drive: 1 kW -Volume flow rate: max. 170 m³/h -Quantity: 1 available -Weight: 20 kg

Condition: excellent (used), Here we offer you a welding fume filter. Welding or soldering fumes are filtered by the SRF-K series with a separation efficiency of 99.9 % and then then returned to the work area. Due to the high air volume flow, even larger smoke clouds can be extracted effortlessly. The cleanable permanent filter cartridges ensure permanently low operating costs. Supply voltage (V) 230 Drive power (kW) 1.3 Back-up fuse (A) 16 Rated frequency (Hz) 50 Operating mode S3 Connection ø (mm) 140 Sound pressure level max. (LpA) 72 Filter area (m²) 18 Number of filter elements (pieces) 1 Negative pressure max. (Pa) 2,800 Air flow rate max. (m³/h) 950 Weight (kg) 69 Dimensions (L x W x H) (mm) 946 x 761 x 1,361 Protection class IP 54 Year of manufacture: 2014 Type: SRF K-10 FM IFA W2 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you. Dcjdpfxen Armae Afnjc

Condition: good (used), Year of construction: 2015, Welding fume filters, welding fume extraction systems, soldering fume extraction systems, mobile filter units, mobile welding fume extraction filter devices, welding fume extractors -Manufacturer: Kemper, filter unit for mobile welding fume extraction -Type: 63100 Dcodpox Hvqfjfx Afnoc -Drive: 1.6 kW -Volume flow rate: 340 m³/h -Extraction arm: not included -Machine dimensions: 300/300/H690 mm -Weight: 23.5 kg

Condition: good (used), Year of construction: 1992, Mobile welding fume filters, welding fume extraction, soldering fume extraction -Drive: 1.6 kW -Connection: 220 V 50 Hz -Weight: 46 kg Dcjdpfx Afeb A Sbmsnsc

Condition: reconditioned (used), Year of construction: 2019, operating hours: 6,700 h, functionality: fully functional, machine/vehicle number: 3.9 - 1200C, type of input current: three-phase, input voltage: 400 V, filter area: 40 m², suction capacity: 1,500 m³/h, negative pressure: 3,000 Pa, compressed air connection: 5 bar, power: 3 kW (4.08 HP), extraction connection diameter: 200 mm, LM Ecocell 1500 Year of manufacture: 2019. 3 KW / 6 A / 50 HZ Type: 3.9 - 1200C - Equipped with DOL relay start in original LM control unit, with on/off and automatic start-up functions. - Price includes 9x 4.5m² NEW filter cartridges installed in the unit upon sale. - Price includes 1x NEW HEPA filter cartridge installed in the unit upon sale. Dcodpex Rrlmofx Afnec - Equipped with compressed air cleaning system, Delta P controlled. - Ex works Soerendonk (NL), loaded on truck free of charge. Tested and operational, can be demonstrated in our workshop. - Sold as seen, no warranty. - Tested on site and in proper working order. - Testing and inspection possible.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, input voltage: 400 V, filter area: 696 m², suction capacity: 10,000 m³/h, compressed air connection: 6 bar, power: 11 kW (14.96 HP), Equipment: dust extraction, fume extraction, type plate available, ULMATEC Industrial Extraction System – Complete Solution for Laser and Welding Fume (696 m² Filter Area) For sale is a high-performance, central ULMATEC industrial extraction system designed for laser fume, welding fumes, and fine metallic dust. The system is in well-maintained condition, has been serviced regularly, and is immediately ready for operation. Ideal for manufacturing facilities, laser processing, welding stations, and metalworking companies with high emission loads. Technical Specifications: Manufacturer: ULMATEC GmbH Total filter area: 696 m² (3 filter modules) Airflow: approx. 10,000 m³/h Motor rating: 11 kW Filter cleaning: automatic JetPulse cleaning Filtration stages: main filter, HEPA filter, activated carbon filter Control system: ULMATEC P-Line (frequency-controlled, vacuum regulation, 24/7 operation mode) Pre-separation: large cyclone pre-separator Additional system: automatic precoat unit Applications: Laser Cutting, Welding Fume Extraction, Metal Dust Extraction Condition: Fully functional Regularly serviced Ready for immediate use Normal signs of use Advantages: Very large filter area and high performance reserve Extended filter lifetime due to cyclone + precoating Multi-stage filtration including HEPA & activated carbon Energy-efficient frequency regulation Robust industrial design for continuous operation Automatic filter cleaning (JetPulse) Scope of delivery: Complete ULMATEC extraction system Three-part filter unit 11 kW blower P-Line 24/7 control Cyclone pre-separator Precoat unit Djdpfxexwvy Eo Afnscc Existing connections/components as agreed Price & Location: Price: €49,500 negotiable (net) The price reflects the exceptionally large filter area (696 m²), advanced multi-stage filtration, and robust industrial 24/7 configuration. Location: 89340 Leipheim Collection preferred Test run possible

Condition: excellent (used), Aerosol extraction and filtration Manufacturer: United Air Specialists Type: Mena 2000 Com. 13051 P: 1.5 kW Vmax: nom. 1700 m³/h pg: 1500 Pa U: 400 V F: 50 Hz Djdpfx Afox Rp Eqsnjcc I: 3.3 A tmax: 65°C Find more items – new and used – in our shop! International shipping costs on request!