Used Welding Fume Extractor for sale (6,239)

Condition: used, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, filter area: 324 m², suction capacity: 18,000 m³/h, negative pressure: 2,250 Pa, input frequency: 50 Hz, Dust extraction, filtration, welding fume extraction, self-cleaning cartridge filter, pneumatic, vacuum-based TEKA AIRTECH P18. The main areas of application for these systems are industrial plants/welding shops where it is not possible to implement point extraction or where point extraction is not sufficient to maintain clean air in the workshop. Laterally mounted ducts with a pollution collection point draw in contaminated air and lead it to the filtration section. Here, pollutants in the form of fine particles accumulate on the surface of the cartridge filter. A compressed air pulse is applied to clean the cartridge filters automatically at the required intervals. After the compressed air pulse, the particles collected on the filter surface detach and fall into the dust collection tank. Bsdpfxj Ahm Iij Anpsww The cleaned air returns to the work area through individually adjustable long-range nozzles. At the same time, the outlet of the cleaned air directs the contaminated air in the workshop towards the extraction ducts. The filter is cleaned by a microprocessor controller with compressed air pulses during operation, resulting in high device efficiency. Low compressed air consumption thanks to the "Power-Spray" system. The AIRTECH series of devices is certified by IFA according to EN ISO 15012-1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a stationary, local welding fume extraction unit. Parameters: Capacity - 18,000 m3/h Motor power - 11 kW Vacuum - 2250 Pa Filtration area - 324 m2 (9 filter cartridges of 36 m2 each) Fan in a sound-absorbing housing Control cabinet with electrical documentation Noise level - 72 dB Dimensions: Height - 5.00 m Base width - 1.44 m x 1.44 m Width with outlet ducts - 8.5 m Total weight approximately 2400 kg

Condition: used, Year of construction: 2015, functionality: fully functional, type of input current: three-phase, overall weight: 200 kg, input voltage: 400 V, filter area: 15 m², suction capacity: 1,100 m³/h, negative pressure: 3,200 Pa, input frequency: 50 Hz, hose length: 3,000 mm, Welding fume extractor, dust collector, self-cleaning filter, pneumatic, vacuum KEMPER. For welding, grinding, and all types of dry dust. Self-cleaning welding fume filter with non-polluting dust collection. The mobile cartridge filter KEMPER MaxiFil Clean is designed for continuous operation to filter welding fumes and dust with high concentrations. Suitable for use in welding carbon steels, low-alloy steels, high-alloy steels, and aluminum using any welding method. Economical in operation due to the long service life of the filter cartridge. Parameters: Capacity - 1100 m3/h Maximum vacuum - 3200 Pa Three-phase fan with a power of 1.5 kW Filtration area - 15 m2 Bwjdpjzdqv Usfx Anpsw Year of manufacture - 2015 Patron filter cartridge with PTFE membrane Filtration efficiency - > 99.97% Built-in delay timer in start-stop mode. When connected to a start-stop sensor (optional), the delay time for fume extraction after the welding process is completed can be set to a value of 5-60 seconds. Stock number - 1145

Condition: new, Year of construction: 2025, warranty duration: 12 months, type of input current: three-phase, input frequency: 400 Hz, overall weight: 90 kg, input voltage: 380 V, VIBER-SYSTEM OS3008 – Industrial fume extractor for welding fumes – NEW Professional mobile extractor with a capacity of 3,000 m³/h, designed for localized extraction of fumes and dust generated during welding, cutting, and grinding operations. Ideal for mechanical workshops, metalworking shops, industries, and welding stations. TECHNICAL SPECIFICATIONS Model: VIBER-SYSTEM OS3008 Airflow: 3,000 m³/h Motor power: 3 kW Pressure: 2,000 Pa Power supply: 380 V Declared filtration efficiency: up to 99.9% Filter: PTFE membrane Filtration area: 30 m² Extraction arm: rotatable 360° Arm length: 2–3 meters Arm diameter: 160 mm Noise level: less than 65 dB Weight: 90 kg Filter cleaning: manual MAIN ADVANTAGES Fume extraction directly at the source High-efficiency filtration system Mobile structure on wheels, easily transportable Adjustable arm to adapt to different work stations Bedpj Ahh Dcsfx Anpeww Practical solution for workshops and industrial environments CONDITION: New

Condition: good (used), Year of construction: 1991, Welding fume filter, Tebaron, TE 1200 – used - : Price ex location: €650 (net) Bwodpfxsyhxl Rs Anpow Manufacturer: ISI Industrie-Produkte GmbH Model: TE 1200 Year of manufacture: 1991 380V, 1.1kW, 2.6A, IP54 Condition: good Availability: immediately Location: Waltrop

Condition: used, Year of construction: 2009, suction capacity: 16,000 m³/h, negative pressure: 2,500 Pa, Dust extraction,welding fume extraction,cartridge filter self-cleaning,pneumatic,vacuum for plasma,laser,sandblasting,sodding,blasting and all kinds of dry dust. The filter is cleaned pneumatically by impulses of compressed air during operation, which makes the device highly efficient. Fan on the clean side, which reduces the risk of explosion to a minimum. 15 Kw fan Capacity 16000 m3/h Vacuum 2500 Pa Filter cartridges - 13 pieces. Filtration area 260m2 Inlet diameter - 2x 560 mm Bsdork Itcjpfx Anpeww Year of production - 2009 Dimensions of the device: height - 2.70m width - 5.70m x 1.85m weight - 2600kg

Condition: used, Year of construction: 2017, functionality: fully functional, type of input current: three-phase, filter area: 216 m², suction capacity: 8,000 m³/h, negative pressure: 3,200 Pa, Dust extraction unit, fume extractor for welding, self-cleaning filter, pneumatic, vacuum-based, designed for continuous operation. Suitable for plasma cutting, laser cutting, sandblasting, soda blasting, welding, and all types of dry dust. The fan is located behind the filter on the clean air side, which minimizes the risk of explosion. Ultra Web filter cartridges are pneumatically cleaned with compressed air pulses during operation, ensuring high device efficiency. Brand: FÜCHTENKÖTTER Model: FKPF 192/12 Fan power: 11 kW Airflow: 8000 m3/h Vacuum: 3200 Pa Nozzle diameter: 500 mm Number of filter cartridges: 12 pcs. Filtration area: 216 m2 Year of manufacture: 2017 New filter cartridges (coated with impregnant) Dimensions: Height: 4.02 m Width: 3.95 m Bwodpfx Aney T Iyrjpsw Depth: 1.85 m Base: 2.50 m x 1.70 m Stock number: 1120

Condition: used, Year of construction: 2008, functionality: fully functional, type of input current: three-phase, overall weight: 1,200 kg, input voltage: 400 V, total width: 1,050 mm, total length: 1,920 mm, total height: 2,160 mm, filter area: 23.75 m², suction capacity: 1,500 m³/h, Equipment: type plate available, HERDING brand dust extraction and welding fume extraction system. Self-cleaning filter, pneumatic, suitable for plasma, laser, abrasive blasting, grinding gypsum, cement, plastics, and all types of dry dust. The filter is pneumatically cleaned with pulses of compressed air during operation, ensuring high device efficiency. Highly efficient Jet-Pulse cleaning system with low compressed air consumption. Model: Delta Comp 1500-5/9 SB Fan power: 5.5 kW Capacity: 1500 m3/h Filtration area: 23.75 m2 Inlet diameter: 150 mm Height: 2.16 m Bwodpezpxdkofx Anpsw Width: 1.05 m Depth: 1.92 m Weight: 1200 kg Stock number: 1158

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, type of input current: three-phase, overall weight: 135 kg, input voltage: 400 V, filter area: 10 m², suction capacity: 1,000 m³/h, negative pressure: 3,000 Pa, input frequency: 50 Hz, input current: 3 A, Equipment: type plate available, Welding fume extractor, dust collector, self-cleaning filter, pneumatic, vacuum KEMPER. For welding, grinding, and all types of dry dust. The filter is cleaned pneumatically with pulses of compressed air during operation, ensuring high device efficiency. Model: Filter-Master XL Year of manufacture: 11/2013 Fan power: 1.5 kW Capacity: 1000 m3/h Vacuum: 3000 Pa Filter cartridge Filtration area: 10 m2 Extraction arm length: 3.00 m Bjdpfx Aezu Rm Ijnpeww Stock number: 1163

Condition: used, Year of construction: 2015, functionality: fully functional, type of input current: three-phase, overall weight: 135 kg, filter area: 10 m², suction capacity: 1,000 m³/h, negative pressure: 2,900 Pa, Welding fume extractor, dust extraction unit, self-cleaning pneumatic vacuum filter KEMPER. For welding, grinding, and all types of dry dust. The filter is cleaned pneumatically by compressed air pulses during operation, ensuring high efficiency of the unit. Bodpfx Anjyz Rt Dopoww Model: Filter-Cell XL Year of manufacture - 7/2015 Fan power 1.5 kW. Airflow 1000 m3/h Vacuum 2900 Pa Cartridge filter element. Stock no. - 1128 1/2

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, type of input current: three-phase, volume flow: 1,000 m³/h, Equipment: documentation/manual, Welding fume extractor, dust collector, filter, pneumatic, vacuum-based, IVAT. For welding, grinding, and all types of dry dust. Bwjdpfx Asz R Shljnpsw Filter cleaned pneumatically with compressed air (manually). Model: Flex-22 Year of manufacture: 2018 Fan power: 1.1 kW Capacity: 1000 m3/h Cartridge-type filter element. Extraction arm, approximately 2.5 m long. Stock number: 1168

Condition: like new (used), Year of construction: 2014, type of input current: three-phase, total width: 1,200 mm, total length: 1,600 mm, total height: 3,850 mm, filter area: 120 m², suction capacity: 7,200 m³/h, Dust extraction unit, fume extraction unit, self-cleaning filter from the renowned NEDERMAN brand. The FilterMax DX, designed by Nederman, is a modular filtration system capable of serving extraction points throughout the entire production hall. The FilterMax DX is designed to operate with dry dust that may pose an explosion hazard. The unit is equipped with a reinforced, double-grounded housing with a panel designed to withstand extreme loads that occur during an explosion. The unit is like new – it has never been used (stock surplus). Brand: Nederman Model: FilterMax DX 6000 TR Year of manufacture: 2014 Designation: EX II 1/3 D T=125°C Capacity: 7200 m3/h Filtration area: 120 m2 Filter cartridges: 12 pcs Fan power: 11 kW Inlet diameter: 300 mm ATEX panel to relieve explosion pressure ATEX check valve Bwsdjzf Hn Aepfx Anpew Unit dimensions: Width: 1.20 m x 1.60 m Height: 3.85 m Base: 1.10 m x 1.40 m Stock number: 0008

Condition: used, Welding Fumes Extractor CAPTAIR Year of construction: 1995 Voltage: 380 V Tubing Length: 3000 mm Bwjdpez I Dglsfx Anpsw Width: 600 mm Depth: 500 mm Total height: 1300 mm

Condition: used, functionality: fully functional, type of input current: three-phase, filter area: 20 m², suction capacity: 3,500 m³/h, negative pressure: 3,000 Pa, Mobile welding fume extractor, dust extraction unit, self-cleaning pneumatic vacuum filter TEKA. Model: TK-PF Mobile filtration and ventilation unit. Suitable for welding, grinding, and all types of dry dust. The filter is cleaned pneumatically by compressed air pulses during operation, ensuring high efficiency. Fan power: 1.1 kW – three-phase Max. capacity – 3500 m3/h Max. negative pressure – 3000 Pa 2 extraction arms, each 4.00 m long. Stock no. – 1106 Bedpfx Aey Hq Rtenpjww

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, filter area: 64 m², suction capacity: 5,000 m³/h, negative pressure: 3,000 Pa, input frequency: 50 Hz, Equipment: type plate available, Nederman dust extraction unit, fume extraction system, self-cleaning cartridge filter, pneumatic, vacuum-based, suitable for plasma, laser, sandblasting, soda blasting, shot blasting, plastics, and catalysts, mineral processes, and all types of dry dust. The filter is cleaned pneumatically with pulses of compressed air during operation, ensuring high device efficiency. The fan is located on the clean side, minimizing the risk of explosion. Fan power: 5.5 kW Capacity: up to 5000 m3/h Vacuum: up to 3000 Pa Cartridge filter elements: 16 pcs Filtration area: 64 m2 Inlet diameter: 315 mm Dimensions: Length: 1.60 m Width: 1.65 m Height: 3.40 m Base: 1.32 m x 1.12 m Stock number: 1174 Bsdpoz R T Eljfx Anpeww

Condition: used, Year of construction: 2011, operating hours: 2,591 h, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, total width: 4,400 mm, total length: 1,250 mm, total height: 4,000 mm, volume flow: 10,000 m³/h, filter area: 100 m², suction capacity: 10,000 m³/h, input frequency: 50 Hz, Equipment: type plate available, Dust extraction, filter ventilation, welding fume extraction, self-cleaning cartridge filter, pneumatic, vacuum-based TEKA AIRTECH P10. The main areas of application for these systems are industrial plants/welding shops where point extraction is not feasible or where point extraction is insufficient to maintain air quality in the hall. Laterally mounted ducts with a pollutant collection point at a height of 3 m draw in contaminated air and direct it to the filtration section. Here, pollutants in the form of fine particles accumulate on the surface of the cartridge filter. Compressed air pulses are supplied to clean the cartridge filters automatically at the required intervals. Upon impact, the particles collected on the filter surface detach and fall into the dust collection tank. The cleaned air returns to the work area through individually adjustable long-range nozzles. At the same time, the discharge of the cleaned air directs the contaminated air in the hall towards the extraction ducts. The filter is cleaned by a microprocessor controller with compressed air pulses during operation, resulting in high device efficiency. Low compressed air consumption thanks to the "Power-Spray" system. Bjdpfoz N Am Ujx Anpjww Parameters: Capacity - 10,000 m3/h Motor power - 11 kW Filtration area - 100 m2 Fan in a sound-absorbing housing Year of manufacture - 2011 Number of operating hours - 2591 h Dimensions: Height - 4.00 m Base width - 1.20 m x 0.80 m Stock number: 1173

Condition: used, Year of construction: 1999, functionality: fully functional, type of input current: three-phase, overall weight: 1,100 kg, input voltage: 400 V, filter area: 286 m², suction capacity: 7,000 m³/h, input frequency: 50 Hz, Equipment: type plate available, Dust extraction unit, fume extraction unit, self-cleaning filter, pneumatic, vacuum-operated for continuous operation, from the renowned Donaldson Torit brand. Suitable for plasma cutting, laser cutting, sandblasting, soda blasting, welding, and for all types of dry dust. The fan is located behind the filter on the clean air side, minimizing the risk of explosion. The filter cartridges are pneumatically cleaned with pulses of compressed air during operation, ensuring high device efficiency. Fan power: 9 kW Flow rate: 7000 m3/h Inlet diameter: 350 mm Number of filter cartridges: 12 Filtration area: 286.8 m2 Year of manufacture: 1999 Dimensions: Bjdpfx Aez Hkgisnpsww Width: 2.10 m Depth: 2.50 m Height: 3.37 m Base: 2.11 m x 1.52 m Stock number: 1171

Condition: used, Year of construction: 2012, type of input current: three-phase, input voltage: 400 V, total width: 1,150 mm, total length: 2,150 mm, total height: 4,300 mm, filter area: 286 m², suction capacity: 16,000 m³/h, input frequency: 50 Hz, Dust extraction system, fume extraction for welding, self-cleaning cartridge filter, pneumatic, under-pressure system for plasma, laser, sandblasting, soda blasting, shot blasting, and for all types of dry dust. The filter is cleaned pneumatically with pulses of compressed air during operation, resulting in high device efficiency. The fan is located on the clean side, minimizing the risk of explosion. Brand: Donaldson Torit DCE Model: DFO4-16 Year of manufacture: 2012 Cartridge filter inserts, oval - DFO ULTRA-WEB FR - 16 pcs Filtration area: 286 m2 Fan power: 22 kW Fan model: ART 632/N4 Capacity: 16,000 m3/h Noise silencer included. We also offer new filter inserts on request, tailored to the intended use of the equipment. Bwodpjz Nx S Tjfx Anpsw Stock number: 0018

Condition: used, Year of construction: 2008, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, filter area: 100 m², suction capacity: 7,500 m³/h, negative pressure: 3,000 Pa, input frequency: 50 Hz, Equipment: type plate available, Dust extraction, filter ventilation, fume extraction, self-cleaning cartridge filter, pneumatic, vacuum system for plasma, laser, sandblasting, soda blasting, shot blasting, and for all types of dry dust. Brand: TEKA Model: Filtercube 4H Year of manufacture: 2008 The filter is cleaned by a microprocessor controller using pulses of compressed air during operation, resulting in high device efficiency. Low compressed air consumption thanks to the "Power-Spray" system. The central Filtercube filter ventilation unit, equipped with cartridge filters, provides an ideal solution for almost all problems in the field of fume and dust filtration. The fan is located on the clean side, minimizing the risk of explosion. The Filtercube production series is certified by a German institute according to DIN EN ISO 15012-1 and approved for welding class W3 as a stationary fume extraction unit. Applications: central extraction system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables system for general ventilation of halls (push-pull system, buoyancy system) extraction system in combination with an extraction table extraction system for grinding non-explosive materials Bwodpfx Ans Aazd Ejpsw Parameters: *Fan with a power of 7.5 Kw. *Capacity 7500 m3/h *Maximum vacuum 3000 Pa *Filtration area 100 m2 *Noise silencer Stock number: 1178

Condition: used, Year of construction: 2003, functionality: fully functional, type of input current: three-phase, overall weight: 1,100 kg, input voltage: 400 V, total width: 1,650 mm, total length: 2,000 mm, total height: 4,000 mm, filter area: 140 m², suction capacity: 3,800 m³/h, negative pressure: 3,500 Pa, Dust extraction unit, fume extraction for welding, self-cleaning filter, suitable for plasma cutting, laser cutting, sandblasting, shot blasting, and all types of dry dust. The filter is pneumatically cleaned with compressed air pulses during operation, resulting in high device efficiency. The fan is located on the clean air side, minimizing the risk of explosion. Year of manufacture: 2003 Motor power: 7.5 kW Capacity: 3800 m3/h Inlet diameter: 280 mm Filter cartridges: 9 pcs. Filtration area: 140 m2 Fire damper Noise silencer Dimensions: Height: 4.00 m Bedpfxszlzv Ie Anpoww Width: 1.65 m Depth: 2.00 m Base: 1.33 m x 1.84 m Stock number: 1148

Condition: used, Year of construction: 2015, type of input current: three-phase, input voltage: 400 V, filter area: 286 m², suction capacity: 6,000 m³/h, input frequency: 50 Hz, Equipment: type plate available, Dust extraction unit, fume extraction unit for welding, self-cleaning cartridge filter, pneumatic, vacuum-based, suitable for plasma cutting, laser cutting, sandblasting, soda blasting, shot blasting, and for all types of dry dust. The filter is cleaned pneumatically with pulses of compressed air during operation, resulting in high device efficiency. The fan is located on the clean air side, minimizing the risk of explosion. Brand: Donaldson Torit DCE Model: DFPRO 16-R Year of manufacture: 2015 Unit in the "R" version – reinforced construction with additional grounding. Built-in explosion relief flap. Delayed dust discharge valve, EX ATEX certified. Filtration area: 286 m2 Fan power: 7.5 kW Capacity: 6000 m3/h New filter cartridges installed in the unit. Stock number: 1029 Bedpfx Ajz Trrhonpsww

Condition: used, Year of construction: 2003, functionality: fully functional, type of input current: three-phase, overall weight: 620 kg, filter area: 60 m², suction capacity: 5,000 m³/h, negative pressure: 2,500 Pa, Dust extraction unit, fume extraction unit for welding, self-cleaning cartridge filter, pneumatic, vacuum-based system for plasma cutting, laser cutting, sandblasting, soda blasting, shot blasting, and for all types of dry dust. Bsdpfx Ajzil Ivenpeww Kemper System 8000 The filter is pneumatically cleaned with pulses of compressed air during operation, ensuring high device efficiency. The fan is located on the clean air side, minimizing the risk of explosion. Year of manufacture: 2003 Fans with a power of 5.5 kW. Flow rate: 5000 m3/h Vacuum: 2500 Pa Filtration area: 60 m2 Stock number: 1147

Condition: used, filter area: 42 m², suction capacity: 1,750 m³/h, Suitable for welding, grinding, sandblasting, and all types of dry dust. Bjdsy Hhcaopfx Anpoww The filter is pneumatically cleaned by compressed air pulses during operation, ensuring high device efficiency. Fan power: 1.1 kW – single-phase Capacity: 1,750 m3/h Large filtration area – 42 m2 HEPA filter for precise air purification Mechanical spark arrester Stock no.: 1118

Condition: used, Year of construction: 2008, type of input current: three-phase, filter area: 10 m², suction capacity: 1,000 m³/h, negative pressure: 3,000 Pa, arm reach: 3,000 mm, Mobile welding fume extractor, dust extraction unit, self-cleaning filter, pneumatic, vacuum type KEMPER. Suitable for welding, grinding, and all types of dry dust. The filter is cleaned pneumatically with compressed air pulses during operation, ensuring high efficiency of the device. Bwedpfx Ajymkq Ssnpjw Model: Filter-master XL Fan power: 1.5 kW Airflow: 1000 m3/h Vacuum: 3000 Pa Cartridge filter element. Stock no.: 1110

Condition: used, Year of construction: 2011, filter area: 418 m², suction capacity: 14,000 m³/h, negative pressure: 3,600 Pa, Dust extraction, welding fume extraction, self-cleaning, pneumatic, vacuum cartridge filter for plasma, laser, sandblasting, soda blasting, shot blasting and all types of dry dust. Brand: VALCO Model: PPX-18-W3 Thanks to the W3 approval, the filter in this version can be used when welding high-alloy steels. The filter is cleaned with compressed air pulses during operation, which ensures high efficiency of the device. The fan is on the clean side, which reduces the risk of explosion to a minimum. Parameters : Efficiency - 14000 m3/h Negative pressure - 3600 Pa Filtration area - 418 m2 Cartridge filter inserts - 18 pieces Fan - 15 Kw Inlet diameter - 450 mm total length - 2.80 m total width - 1.35 m height - 4.00 m Device from 2011 Full technical documentation available. Bwedpfx Aswiuaqsnpjw There are 2 pieces of this device available. Stock no.: 0986 1/2

Condition: used, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, suction capacity: 1,000 m³/h, negative pressure: 3,000 Pa, Welding fume extraction, dust extraction, self-cleaning filter, pneumatic, vacuum-based KEMPER. For welding, grinding, sandblasting and all types of dry dust. The filter is pneumatically cleaned with compressed air pulses during operation, ensuring high device efficiency. Device for wall mounting. Fan power: 1.5 kW Flow rate: 1000 m3/h Bwodpfx Anezlqkhjpow Maximum vacuum: 3000 Pa Extraction arm length: 3.00 m Stock number: 0391