Used Welding Fume Extractor for sale (6,246)

Condition: new, Year of construction: 2024, Protec KT 10000 welding positioner Complete set with hand-held remote control 10,000 kg load capacity Diameter of the clamping plate: 2000 mm Height when tilted: up to 1600 mm to the center Height in horizontal position: 1920 mm Speed: continuously adjustable from 0.01 to approximately 0.35 RPM (higher speeds possible) Tilting angle: up to 120° Length: 2800 mm Dcedpfoid Szvjx Ak Aop Width: 1920 mm Foot pedal remote control available at an additional cost of €390.

Condition: new, Year of construction: 2025, load capacity: 20,000 kg, 20-ton container rotating device, roller stand, complete set Dsdpeifgu Uofx Ak Ascp 380 V, speed continuously adjustable from 200 to 1000 mm/min. for diameters from 500 mm to 4000 mm roller diameter 300 mm x 140 mm temperature resistance of the support rollers: 100°C synchronous dual drive AC motor, 380 V, 750 W with hand and foot remote control, complete set

Condition: new, Year of construction: 2025, Protec KT 3000 HV, hydraulically adjustable in height Load capacity: 3000 kg Handheld remote control with digital display Dual-pedal remote control Height: approx. min. 700 mm when tilted to the center, max. 1400 mm Diameter of the turntable: 1400 mm Tilt angle: min. 135° Speed: 0.05 to 0.9 rpm Dcjdpfx Akeifw Hdo Asp Motor power: 3 kW

Condition: new, Year of construction: 2024, 5000 kg load capacity welding turntable, very robust Speed continuously adjustable from 0.05 to 0.7 RPM Turntable diameter 1500 mm Tilt up to 135° Height in horizontal position 1660 mm, tilted to the center 1440 mm Length 2.4 m x Width 1.48 m Dsdpfx Ajig T A Rsk Aecp with remote control

Condition: new, Year of construction: 2025, load capacity: 2,000 kg, Protec KT 2000 HV, Hydraulically height adjustable Load 2000 KG Manual remote control with digital display Double foot remote control Height approx. min. 800mm tilted to middle , height max. 1400mm Height min. horizontal 1000mm diameter faceplate 1200mm Tilt angle min. 135 Speed 0,05 to 0,9 rpm. Motor power 3 KW Djdjncfvhjpfx Ak Ascp

Condition: new, table diameter 180 mm 10 Kg 5 Kg chucking diameter 65 mm turning speeds 2 - 20 stufenlos swivelling range 90 Grad tilt adjustment: manually/mechanicall manuell connected load frequency 230 V weight of the machine ca. 18 Kg dimensions of the machine ca. 300 x 300 x 300 m welding turntable with - Quick chuck 65mm Dodpfji Hg Iyex Ak Aocp - foot switch - tilting/pivoting by hand - Speed continuously adjustable

Condition: new, table diameter 315 mm 50 Kg 25 Kg chucking diameter 200 mm turning speeds 0 - 5 stufenlos swivelling range 90 Grad Dedpfx Aoi Hg I Dsk Ajcp tilt adjustment: manually/mechanicall manuell connected load frequency 230 V weight of the machine ca. 45 Kg dimensions of the machine ca. 800 x 600 x 600 m welding turntable with - With integrated tripod and universal welding torch holder - Quick chuck 200mm - foot switch - tilting/pivoting by hand - Speed continuously adjustable

Condition: new, number 106 Positionen weight 283 kg condition neu 28 mm Set. 4: 110 pieces 28mm system, consisting of: Ferrules: 14 x 280610.N Ferrules: 10 x 280630.N Prism: 6 x 280648.1.N Bolt: 30 x 160511 Magnetic bolt 8 x 280740 Stop: 10 x 280410.N Stop: 10 x 280420.N Stop: 4 x 280430.N Angle: 8 x 160110.N Dedpfxopam Hgj Ak Ajcp Angle: 2 x 280152.N Angle: 2 x 280162.N Angle: 1 x 280164.N Angle: 1 x 280165.N Angle: 1 x 280166.N Angle: 1 x 280167.N Trolley: 1 x 280910 Accessory set. 1 x 283999 Price information plus packaging and transport.

Condition: used, Ankom XT10 Fat Extractor + RD Dryer Fat extractor ANKOM XT10 for determining crude fat content The closed system with FilterBag technology reduces extraction times. Dcodpfx Aoucvp Ajk Aop Sample weight: 1-2g directly into FilterBags. Operating range: 0-100% fat, extraction times: 15-60 minutes, extraction of up to 15 samples simultaneously. Semi-automatic system, unattended process, >90% solvent recovery, manual solvent addition. More items in other sizes – new and used – can be found in our shop! International shipping costs available upon request!

Condition: new, Year of construction: 2024, load capacity: 6,000 kg, Equipment: foot remote control, Welding rotary table, container rotating device, 6000 kg load capacity with hand and foot remote control Diameter from 160 mm to 4000 mm Drive roller diameter 300 mm Dimensions: Length: 1900 mm x Width 470 mm x Height 390 mm Speed, continuously variable, 50 - 2000 mm/min. Motor AC 380 V Djdegfql Ajpfx Ak Aecp

Condition: new, table length 3000 mm Dcjdpfxogarhre Ak Asp table width 1500 mm table height 850 mm Vertikal stroke 40 mm weight of the machine ca. 0,8 t dimensions 3,0 x 1,5 x 0,9 m Welding table "SIEGMUND Professional 750 + plasma nitrided" is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 11.5 - 13.0mm. The holes have a diameter of 16mm. Hole arrangement in 50 mm grid on the table top, parallel hole arrangement in a 25 mm grid on the sides. Including basic equipment. Table height 850mm Accessories shown are optional. Price plus packaging and transport.

Condition: new, number 29 Positionen 16 mm condition neu Dcsdpfxjgarhvo Ak Asp weight 11 kg Set 1 29 pieces, 16mm system, consisting of: Clamps: 4 x 160610 Bolt: 12 x 160511 Stop: 4 x 160420.N Angle: 4 x 160108.N Angle: 4 x 160110.N Accessory set. 1 x 163999 Price plus packaging and transport.

Condition: as good as new (ex-display), Year of construction: 2023, Welding rotary table Protec KT 5000 HV Complete set including hand-held and dual-pedal remote control Digital display for speed Hydraulic height adjustment Dimensions: Dsdpfx Akoficr Uj Aocp minimum tilted height: 800 mm maximum tilted height: 1900 mm minimum horizontal height: 1050 mm maximum horizontal height: 2000 mm diameter of the clamping disc: 1500 mm length: 2900 mm, width: 1400 mm weight: 3200 kg speed: from 0.01 to approximately 0.7 RPM.

Condition: new, table length 1200 mm table width 800 mm table height 900 mm table load 2000 Kg weight of the machine ca. 0,24 t dimensions 1,0 x 1,0 x 0,9 m Welding table / hole table: Hole diameter: 28.3mm Dedpfx Akjfg U S Ej Aocp The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional !!

Condition: new, table length 2000 mm table width 1000 mm table height 850 mm Vertikal stroke 50 mm weight of the machine ca. 0,73 t dimensions 2,0 x 1,0 x 0,9 m Dcsdpjfnxxujfx Ak Ajp Welding table "SIGMUND Professional 750 + Plasma-nitrided" is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 24.5-27mm. The holes have a diameter of 28mm. Hole arrangement in 100 mm grid on the table top parallel hole arrangement in 50 mm grid on the sides. Incl. Foot basic equipment. Pictured accessories optional. Price indication plus packaging and transport.

Condition: new, clamping range of chuck 120 - 380 mm height 95 mm daylight 170 mm external diameter Futter 400 mm external diameter Spannhebel 600 mm weight 26 kg Characteristics: • Self-centering. • Reversible jaws. • Fixed clamping levers allow fast workpiece changes. • Low weight and flat design minimize the center of gravity. Djdpsfv Awtjfx Ak Aocp The D-D quick chuck enables a quick product change and is suitable excellent with frequent component changes. You do not need a loose one Quick release wrench, as the levers are integrated into the quick release chuck.

Condition: new, table diameter 1500 mm table load 5,0 t swivelling range 0 - 135 Grad turning speeds 0,05 - 0,5 U/min max. torque on the faceplate 10000 Nm table pass 200 mm Dsdpfxefv Axfj Ak Aecp welding current 700 Ampere total power requirement 1,5 + 3,0 kW weight of the machine ca. t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical.

Condition: new, table diameter 2000 mm table load 10,0 t swivelling range 0 - 135 Grad turning speeds 0,05 - 0,5 U/min max. torque on the faceplate 20000 Nm table pass 200 mm welding current 1000 Ampere total power requirement 3,0 + 4,0 kW weight of the machine ca. t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. Dcsdpfofv Axijx Ak Asp • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical.

Condition: new, table diameter 900 mm table load 1,0 t swivelling range 135 Grad turning speeds 0,12 - 1,2 U/min 820 mm welding current 500 Ampere total power requirement 0,75 + 0,55 kW weight of the machine ca. 1,1 t dimensions of the machine ca. 1,5 x 1,0 x 0,9 m • Self-locking gear, therefore no forward and backward at eccentric Load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. Dcedefv Axxopfx Ak Ajp • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch.

Condition: new, table diameter 1100 mm table load 2 t swivelling range 0 - 135 Grad turning speeds 0,1 - 1,0 U/min 4000 Nm 0 1,1 / 0,75 kW welding current 500 Ampere Djdpjfv Ax Asfx Ak Aocp • Self-locking gear, therefore no forward and backward at eccentric Load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch.

Condition: new, table diameter 1400 mm table load 4 t swivelling range 0 - 130 Grad turning speeds 0,05 - 0,5 U/min 8000 Nm 0 1,1 / 1,5 kW welding current 700 Ampere • Self-locking gear, therefore no forward and backward at eccentric load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission Dcodpefv Ax Rofx Ak Asp • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch.

Condition: new, table diameter 1500 mm table load 5 t swivelling range 0 - 130 Grad Dcsdpjfv Ax Uefx Ak Asp turning speeds 0,05 - 0,5 U/min 10000 Nm 0 1,5 / 1,5 kW welding current 700 Ampere • Self-locking gear, therefore no forward and backward at eccentric load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch.

Condition: new, table diameter 1600 mm table load 6 t Dsdpfx Aksfv Aycj Aocp swivelling range 0 - 130 Grad turning speeds 0,05 - 0,5 U/min 12000 Nm 0 1,5 / 2,2 kW welding current 700 Ampere • Self-locking gear, therefore no forward and backward at eccentric load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch.

Condition: new, Table dimensions 800 x 800 mm table load 1500 Kg swivelling range 0 - 105 Grad turning speeds 0,15 - 1 U/min height adjustment 672 - 1180 mm hollow spindle diameter mm welding current 500 Ampere max. torque on the faceplate 3000 Nm total power requirement 0,75 kW Dcjdsfv Azpspfx Ak Ajp dimensions of the machine ca. 1560x1120x750 m Characteristics: • Made in EU • Self-locking gear, therefore no leading and trailing at eccentric load • Hydraulic height adjustment allows almost limitless positioning • Electronic quality components from Schneider / Siemens / Delta • Frequency-controlled stepless speed of the turntable • High stability through a heavy and compact design • CE certificate • Very good value for money • Standard version comes with remote control and dual foot pedal • 3 years warranty (see warranty conditions) • Hydraulically height adjustable with locking system (for fall protection)

Condition: used, Wig welding machine, WIG welding system NIMAK Type GS 200 W WIG and DC electrode welding machine, also suitable for stick electrodes Manufacturer's No. 26642, year of manufacture approx. 1983 Output: 200 amps = 60% duty cycle 150 amps = 100% duty cycle Adjustable output range: continuously variable Mains connection: 380 volts, 50 Hz, 32 amps plug Dsdodzqbvspfx Ak Ascp - 5 meter WIG hose assembly - HF ignition - Continuous current control and current increase - Connection for electrode welding - DC only - Water-cooled - Shielding gas pressure regulator Space requirement L x W x H: 900 x 590 x 1000 mm Weight: approx. 200 kg In good condition