Used Flame Lamination Machine for sale (64,880)

Year of construction: 2017, condition: excellent (used), Flame Lamination Line, 2,000 mm Working Width, Year 2017 It is in very good condition and has only been used occasionally. It was mainly used for single lamination of PVC foil with thin PU foam for the packaging industry. The line is built on a welded steel frame and supplied in pre-assembled modules. It includes a flame laminating unit with three water-cooled, hard-chrome-plated precision calender rolls. The centre roll is fixed; the two outer rolls are motorised and position-adjustable. The lamination gap is adjustable up to 50 mm, with positioning accuracy of ±0.1 mm. Settings are controlled and displayed via the HMI. The burner section has two standard Type 40 water-cooled burners, interchangeable nozzle bars, pneumatic positioning and exhaust hoods. A gas control station with gas/air mixing system is designed for LPG; flame intensity is electrically adjusted and displayed on the HMI. Material feeding and handling equipment includes thread-spreading and guide rollers, synchronised rubber-coated infeed rollers, a backing-material unwinder with pneumatic roll lifting, and a foam unwinder for rolls up to 2,400 mm diameter. A Type FSE 2000/20 foam film welding machine is included. The TA L textile accumulator has a capacity of approx. 100–200 m (depending on material), maximum working width 2,000 mm, stainless-steel table, roll unwinder and web laying device. The line features a GR3 automatic foam-web edge guiding system with optoelectronic sensor and electrically actuated steering frame; adjustable edge offset 5–20 mm. The BTB 01 edge trimming unit has two electrically driven rotary knives, adjustable cutting width and safety guards. Extended knife shafts are optional; a centre-slitting device is included in the scope of supply. Finished-product transport is provided by synchronised pull-off rollers, including a pneumatic pressure roller. The centre-driven winder has manually adjusted tension, with automatic compensation based on winding diameter; winding direction is selectable. A measuring wheel records product length. The PLC control system provides electronic synchronisation of the main and auxiliary drives; auxiliary speeds are adjustable ±10% relative to the main drive and displayed on the HMI. Underfloor material discharge is optional. Technical data: Cjdpfez E S Hhsx Acpjrh • Year: 2017 • Maximum working width: 2,000 mm • Calender roll width: 2,200 mm • Production speed: up to 60 m/min, variable • Electrical supply: 400/230 V, 50 Hz, 3-phase + neutral • Connected load: approx. 14 kW • Cooling water: approx. 2.5 m³/h; 1" connections • Compressed air: 6 bar • Fuel: LPG; 60–100 mbar; consumption up to approx. 12 kg/h, depending on burner setting • Winding height: 1,100 mm • Weight: approx. 6,000 kg • Installation footprint: approx. 17 × 4 m We can arrange transport to your factory, installation and operator training. Contact us for a detailed offer.

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 77249, input voltage: 220 V, cutting length (max.): 2,500 mm, cutting width (max.): 1,250 mm, input current: 1 A, ESAB-HANCOCK oxy-fuel cutting machine UXB 12.5 – manufactured in 1994 – fully functional For sale is an oxy-fuel cutting machine from the manufacturer ESAB-HANCOCK GmbH, type UXB 12.5. Crodezxqa Aspfx Acpeh The machine is in fully functional and operational condition. It was rarely used in our company and therefore has relatively low usage. Technical data: Manufacturer: ESAB-HANCOCK GmbH Type: UXB 12.5 Machine no.: 77249 Year of manufacture: 1994 Connection voltage: 220 V Frequency: 50 Hz Condition: used, fully functional Inspection & collection: The oxy-fuel cutting machine can be inspected on-site and tested for functionality after prior appointment. The sale is exclusively for self-collection. Dismantling, loading, and transport must be arranged beforehand. We will gladly provide further technical information, dimensions, or additional images if there is serious interest.

Condition: used, Year of construction: 1997, functionality: fully functional, stack height: 1,000 mm, working width: 1,020 mm, For sale is a very well-maintained FK 102 S model from 1997, featuring pneumatic side guides, a dust removal calender, electronic overlap control, a film cutting device, an Achilles separator, and a Gemser stacker. The machine is suitable for both wet and thermal lamination. Minimum format: 250 x 360 mm Maximum format: 1020 x 1240 mm Material weight: 100-450 g/m² Crjdpsz Ai Dnefx Acpsh

Condition: used, Year of construction: 2020, functionality: fully functional, table length: 6,000 mm, table width: 2,540 mm, sheet thickness steel (max.): 50 mm, cutting length (max.): 6,000 mm, cutting width (max.): 2,540 mm, FICEP KRONOS KR25SP - CNC GANTRY PLASMA CUTTING SYSTEM FOR STEEL PLATES | YEAR 2020 The Ficep Kronos KR25SP is an automatic CNC gantry system for high-definition plasma cutting of steel plates, designed for steel construction and sheet metal fabrication shops that need precise, repeatable and cost-efficient parts directly from plate. With a maximum plate size of 2,540 x 6,000 mm and a plasma cutting thickness of up to 50 mm, it covers a broad range of parts in a single pass. CONDITION & REFURBISHMENT Refurbished and inspected by a certified technician, ready for operation. The machine is fully functional and can be put into production immediately. - The exact scope of reconditioning varies from machine to machine and is disclosed individually upon serious interest. - Viewing possible by arrangement (machine reconditioned - no demonstration under power). FUNCTION & APPLICATION Csdpfxov Iaqys Acpsrh The KR25SP cuts steel plates fully automatically according to CNC program in gantry design. Using Hypertherm plasma technology including True-Hole technology, it produces contour-accurate cut parts and hole patterns at high cut quality - ideal for gusset plates, end plates, base plates and connection components in steel construction. The robust grid cutting table is prepared for connection to an extraction system; a network remote-diagnosis interface supports maintenance and support. TECHNICAL DATA - Manufacturer: Ficep S.p.A., Italy | Model: Kronos KR25SP (KRONOS SP series) - Machine type: Automatic CNC gantry plasma cutting system for steel plates - Year of manufacture: 2020 | Serial number: 36499 - Condition: used, refurbished by certified technician - Maximum plate size (W x L): 2,540 x 6,000 mm - Max. plasma cutting thickness: 50 mm - Plasma straight-cut torch: 1 | Plasma unit: Hypertherm XPR300 - Hypertherm True-Hole technology: available - CNC control and drives: Fanuc (to be confirmed on the machine during inspection) - Remote diagnostics: available (network connection) - Cutting table: robust grid construction, prepared for extraction system - Extraction and filter system: optionally available Further details (machine weight, connected load, footprint, cutting speed) are available on request. SCOPE OF DELIVERY - 1 x Ficep Kronos KR25SP gantry system (year 2020) - 1 x plasma straight-cut torch (Hypertherm XPR300) - Grid cutting table with extraction preparation - CNC control and drives - Remote-diagnosis interface (network) LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border - short transport distance from the entire DACH region. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM) is your specialist for refurbished Ficep steel construction machinery. We supply inspected, ready-to-operate systems for steel construction and sheet metal fabrication. Further Ficep systems on request. CONTACT / INQUIRY Arrange a viewing | Price on request | Request a callback. Sale exclusively to commercial customers (B2B).

Condition: used, Year of construction: 2022, functionality: fully functional, table length: 6,000 mm, table width: 3,100 mm, sheet thickness steel (max.): 40 mm, cutting length (max.): 6,000 mm, cutting width (max.): 3,100 mm, drill diameter: 32 mm, Equipment: documentation/manual, FICEP KRONOS KR32SP - CNC GANTRY CUTTING SYSTEM PLASMA + DRILLING | YEAR 2022 The Ficep Kronos KR32SP is a CNC gantry cutting system for combined plasma cutting and drilling of steel plates in heavy steel construction. Plasma cutting, drilling, tapping, scribing and marking run in a single pass without intermediate handling. Built in 2022, among the youngest of its class on the used market. CONDITION & REFURBISHMENT Refurbished and inspected by a certified technician, ready for operation. - The exact scope of reconditioning varies from machine to machine and is disclosed individually upon serious interest. - Viewing possible by arrangement (machine reconditioned - no demonstration under power). Crsdpfx Aox H T H Rocpsh FUNCTION & APPLICATION The KR32SP processes raw steel plates into finished components for steel construction. Plasma cutting, drilling, tapping, scribing and marking are combined on a single machine - a continuous workflow without re-clamping. Typical components: gusset plates, stiffener plates, end plates and connection plates. Target industries: steel construction, bridge building, tower construction and general metalworking. Plasma cutting is performed with a Hypertherm XPR300 power source; Hypertherm True Hole technology for dimensionally accurate hole quality is available. The scribing function transfers part numbers, bend lines and weld positions directly onto the component. CAD/DSTV connectivity and specific programming/interface details are confirmed on request. TECHNICAL DATA - Machine type: CNC gantry cutting system (plasma) | Product line: KRONOS SP - Control: Ficep PC-based CNC control - Manufacturer: Ficep S.p.A., Italy | Year: 2022 | Serial number: 36610 - Max. plate size (W x L): 3100 x 6000 mm - Max. plate thickness plasma (straight): 40 mm - Max. number of straight plasma torches: 1 | Plasma power source: Hypertherm XPR300 - Hypertherm True Hole technology: available - Number of drilling heads: 1 | Tool positions per drilling head: 6 - Max. drilling diameter: 32 mm - Spindle power (drilling head): 19 kW | Max. spindle speed: 3500 rpm - Cutting table: sturdy steel grid, prepared for extraction and filter system - Marking/scribing function: available - Dual-gantry option (tandem): available | Remote diagnostics: available (network/VPN) - Combined processes: plasma cutting, drilling, tapping, scribing, marking SCOPE OF DELIVERY - 1 x Ficep KRONOS KR32SP CNC gantry cutting system (base machine) - 1 x straight plasma torch head (Hypertherm XPR300) - 1 x drilling unit with 6-position tool changer - 1 x cutting table (steel grid, 3100 x 6000 mm, integrated extraction preparation) - 1 x CNC control unit (Ficep PC-based, remote diagnostics via network) - 1 x hydraulic and pneumatic power unit - Technical documentation / operating manual - Further equipment and accessories on request LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Machine weight, footprint and electrical connection values follow on request. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM) specializes in refurbished Ficep steel-construction machinery - from saw-drill lines to gantry cutting systems. Further Ficep systems on request. CONTACT / INQUIRY Arrange a viewing | Price on request | Request a callback. Sale exclusively to commercial customers (B2B).

Condition: good (used), Laminating Machine Komfi Delta 76 Stacker Manufactured in 2016/2017. The machine is 100% operational and ready for operation. This is an advanced, high-performance machine, ideal for commercial laminating. The machine is in very good condition and ready for production. Technical specifications: Max sheet size: 760mm x 1120mm Min sheet size: 300mm x 220mm Min grammage: 115 gsm Max grammage: 600 gsm Operating temperature: 80-145°C Max operating speed: 35m/min Built-in Becker compressor Weight: 2800kg Cjdjzlgbpopfx Acperh 380V power supply Additional air supply: 6 bar Power consumption: 18kW Pneumatic clamping, separation, and automatic feeding from a high stack, automatic stacker. Touch panel for easy operation. Sheet straightening module. Tool kit and foil included.

Condition: like new (used), Year of construction: 2010, functionality: fully functional, UV-Coating line, including drying unit for coating primer and protection lacquers as well as processing full sized finishings of digital printable media, running through with solvent-free UV-lacquers and direct lacquer curing with UV-radiation. A maximal plate height of 80 mm can be coated steplessly. Blobtra Devcmd Asi Njd Suitable for almost all surfaces within digital- and screen printing. High quality surfaces are guaranteed. Key Benefits - adjustable UV-power for individual setting up to the different coating requirements - EVG power supply unit for a building main fuse of 63 A. - central access for compressed air and electricity for the entire machine Crodpfevcmd Asx Acpoh Application - varnishing of all firm materials up to height of 80 mm - applying of primer e.g. for glass or furniture surfaces - varnishing of all UV-printed plates - foil inscription for vehicles - lacquer and priming of many flexible materials - displays - digital pictures, luminous exposure - inkjet prints - colored coatings and many more

Condition: excellent (used), Year of construction: 2009, total length: 3,900 mm, total width: 1,450 mm, total height: 1,500 mm, overall weight: 1,500 kg, type of input current: three-phase, input voltage: 400 V, working width: 600 mm, Equipment: type plate available, For Sale: 2x Tromp Make-up, Rolling and Cutting Unit Machines These machines can be integrated into a laminating line, for example in a Tromp, Rademaker, or Fritsch line, etc. Inspection on location is possible. Specifications: - Length x Width x Height (each): 3900 mm x 1450 mm x 1500 mm - Conveyor belt - Module for dough rolling (for baguettes, etc.) - The module can be lifted if no rolled products are needed - Flour duster - Cutting unit for smaller rolled products - Moulder for dividing into 4 dough pieces - Mechanically adjustable height - Almost as new, well maintained - Delivered complete Crodpfx Aox Eb Abecpjh - Belt width: 650 mm - Working width: 600 mm - Output width / exit working width: 1x 800 mm and 1x 900 mm Price per unit: €50,000 Transport upon agreement If you have any questions or comments, please let us know. Best regards, Leo Holland

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, single-sided lamination heated upper steel roller Cedpfx Acszyk A Hjporh

Condition: used, Year of construction: 2021, CNC portal flame cutting machine Manufacturer: Messer Type: MultiTherm Eco 3600 Year of manufacture: 2021 CNC control: Global Control Track gauge: 3,600 mm Working tables: 2,300 x 6,200 mm 4 oxy-fuel torches, type ALFA MS 4452/250 Cutting thickness: max. 150 mm Bevel cutting possible Automatic gas control (OmniFlow) for cutting oxygen (max. 15 bar) Extraction system: Keller dry dust collector, type Vario 2 Software: OmniWin2021 Csdpfx Acjzyablopsrh 051026ä

Condition: excellent (used), Year of construction: 2013, machine/vehicle number: 169083, 2013 Single Sided B2 D&K Europa Laminator Codpfoz E Nfuex Acpsrh Installed used April 2024 refurbished with new rubber rollers and temperature sensor Reason for sale - upgrading to double sided

Condition: excellent (used), Year of construction: 2013, operating hours: 3,525 h, functionality: fully functional, machine/vehicle number: 801213, type of input current: three-phase, input voltage: 380 V, LAMINA CLG 1816 CRASH LOCK FOLDER GLUER 1, 3 OR 4 GLUE POINTS • NORDSON • COLD GLUE & HOT-MELT LAMINA CLG 1816 Crash Lock Folder Gluer available for sale. Manufactured in 2013, this machine is equipped with a professional NORDSON gluing system and can operate with 1, 3, or 4 glue points, providing excellent flexibility for different box constructions and packaging applications. The machine can work with both cold glue and hot-melt adhesive. MACHINE SPECIFICATIONS • Manufacturer: LAMINA System AB, Sweden • Model: CLG 1816 • Machine type: Crash Lock Folder Gluer • Year of manufacture: 2013 • Serial number: 801213 • Gluing system: NORDSON • Gluing configurations: 1, 3 or 4 glue points • Adhesive: Cold Glue and Hot-Melt • Operating hours: 3,525 hours • Total boxes glued: 1,595,966 • Automatic feeding Crodpfx Aozyu Nqscpeh • Automatic folding and gluing LOW USAGE Although the machine was manufactured in 2013, it was used in production for only approximately one year. The machine currently shows: 3,525 operating hours 1,595,966 boxes glued This represents a relatively low level of use for an industrial folder gluer of this type.

Condition: good (used), Autobond Mini 105 TPH-RU-SAB-VS Automatic Laminating Machine The most efficient machine on the market from a legendary manufacturer. This advanced machine boasts high performance thanks to an external heating thermostat. Made in Great Britain. Technical specifications: Max sheet size: 1060mm x 1060mm Min sheet size: 320mm x 285mm Min grammage: 115 gsm Crsdpfxjzz Hfyo Acpjh Max grammage: 650 gsm Operating temperature: 80-135°C Max operating speed: 120m/min Weight: approx. 4500 kg 380V power supply Additional 8 bar air supply Large-diameter, chrome-plated steel cylinder, filled with water for greater stability. Double-sided laminating Pneumatic clamping, separation, and automatic feeding. Adjustable pressure. High-stack feeding, Heidelberg Speedmaster feed head. Expansion roller for film fixing. Sheet straightening module. Stacker for sheet removal. The machine can operate in pallet-to-pallet or pallet-to-roll configurations. Two independent heating systems for two rollers, and a water-based sheet cooling system via rollers.

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: Mini 76 TH, type of input current: AC, input voltage: 400 V, working width: 760 mm, AUTOBOND MINI 76 TH automatic laminator. 2015 Model. Fully refurbished. Max sheet size: 76 x 105cm Min sheet size: SRA4. Speed: 60 m/min. 22 million impressions. Crjdpezpw Izefx Acpjh Heidelberg Feeder. Tool temp YCU. Jogger delivery. Optional post heat system.

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, type of input current: AC, input voltage: 400 V, D&K PROTEUS fully automated B1 laminating machine. Production speed: 35 m/min. Crsdpfx Aez D Uanscpeh Max sheet size: 760 x 1050mm. Min sheet size: 210 x 220mm. Stock range: 115 - 600gsm. Jogger delivery

Condition: used, Year of construction: 1998, functionality: fully functional, Laminating machine LAMINA 1114 FA. Crjdpfx Asy Ryhvjcpjh Manufactured in SWEDEN; year: 1998 Max format: 1400×1100 mm Min format: 200×350 mm Top sheet: 130–450 g/m2 Bottom sheet: from 250 g/m2 Material thickness: 0.6–10 mm Feeder height: 500 mm (bottom), 300 mm (top) Production depending on material: up to 1,500 sheets/hour The machine has been dismantled. At the time of disassembly, it was operational.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, GMP Roller Laminator EXCELAM-II 355 Q Working width 355 mm, hot lamination Laminator for hot lamination films from 32 - 175 microns Infrared-heated silicone rollers, ensuring scratch-free lamination Equipped with an 8-bit microprocessor LCD display and electronic reverse function, standby function Temperature adjustable from 0-160 °C in 1°C increments Temperature and speed settings are pre-programmed for each film thickness The roller pressure can be precisely adjusted for each film thickness using a scale disc Max. passage height: 5 mm Cedpfx Ajzwwqlocpsrh Adapter for 25 mm core diameter Working speed: 0-1.6 m/min, adjustable in 9 steps Connection: 220 V / 50 Hz / 1300 Watts Dimensions: W546 x D456 x H285 mm Weight: 25 kg

Condition: ready for operation (used), Year of construction: 2014, functionality: limited functionality, Working table 12500x2500 Plasma 3D Codjzracyspfx Acperh Generator ESAB Precision Plasma Arc 360 Filter unit Sideros Oxy cutting torches 2pcs . NB! 45 degree oxybevel is not working and needs repair. Uninstalling and installing is not included and has under the buyer's responsibility. Machine is available starting from now!

Condition: used, Year of construction: 1987, functionality: fully functional, ZINSER Flame Cutting System – CNC 500 – Table 3,000 × 8,000 mm Industrial version | CNC controlled | Immediately available Short description: For sale is a robust Zinser flame cutting system with Zinser CNC 500 control and a large cutting table measuring 3 × 8 m. The machine dates from the 1980s and was operating perfectly up to its professional dismantling. The machine is currently dismantled; therefore, a test run is not possible. Inspection of the system and all components is, of course, possible by appointment. Technical data: - Manufacturer: Zinser - Machine type: Not specified - Year of manufacture: 1980s - Control unit: Zinser CNC 500 - Cutting process: Oxy-fuel / flame cutting - Cutting table: approx. 3,000 × 8,000 mm - Condition: used, dismantled Condition & Classification: - System was in operation and fully functional up to dismantling - Dismantled in an orderly and professional manner - Heavy-duty industrial design - Mechanics, table, and gantry in solid condition - Due to age, not a modern high-speed CNC, but: x very robust x straightforward technology x ideal for refurbishment, modernization, or continued use Crodeyanbbopfx Acpsh Scope of delivery: - Cutting table 3 × 8 m - Gantry / carriage - CNC control Zinser CNC 500 - Existing flame cutting components - Sale as inspected Inspection & Collection: - Inspection possible by appointment - No test run possible as the system is dismantled - Loading and transport to be arranged by buyer - Location: Germany

Condition: excellent (used), Year of construction: 2017, operating hours: 52 h, machine/vehicle number: 1704476, Single-sided, sheet-fed, thin-film thermal laminator for long print runs. Maximum sheet size: 106 x 106 cm (41 3/4” x 41 3/4”), Minimum sheet size: 28.5 cm x 32 cm (11.5” x 12.5”), Maximum speed: 120 m/min (394 ft/min), paper weight from 115 gsm (80 lb text) to 650 gsm (24 pt). Quick setup, easy operation, robust construction. • Heidelberg Speedmaster feed head, rising pile, back separation, stream feeder, vacuum feed table, servo-driven mechanical front-lay registration, maximum pile height 1.2 m (47”). Water-heated chrome laminating roller. Credpfx Acezudqgjpjh

Condition: refurbished (used), functionality: fully functional, type of input current: AC, input voltage: 400 V, D&K JupiterAutomated B2 Laminator Refurbished and in excellent working condition. Key features and specifications: - Model: D&K JUPITER 5474 (automatic laminating machine). - Controls: PLC with touchscreen interface; daily and total counters provided. Crodpfx Acozzmr Hopjh - Pressure and handling: adjustable pneumatic pressure; automatic sheet separation via a bursting roller; adjustable anti-blocking during production. - Heating: robust chrome-plated heated cylinder with oil bath. - Sheet size range: minimum 210 mm × 220 mm; maximum 540 mm × 740 mm. - Supported paper weights: 115 gsm to 450 gsm. - Feeder: automatic feeder with a stated capacity of 80 cm. - Film thickness: from 22 µ to 42 µ. - Operating speed: 30 meters per minute. - Electrical: 400 volts (3 × 16 A); power:7 kW. - Physical: dimensions H = 1400 mm × W = 1950 mm × D = 1200 mm; weight 650 kg.

Year of construction: 2013, condition: good (used), Technical specifications: (1) Codpfxjzry I Nj Acperh Minimum format: 400 x 400 mm Maximum format: 1260 x 1250 mm Top sheet: Cardboard from 180 – 450 g/m2 Bottom sheet: Between 0.5 and 8 mm Maximum speed: (2) Up to 6000 sheets/hour Accuracy: ± 1.5 mm Installed power: 17 kW Dimensions: 13.9 x 2.22 x 2.68 m Weight: 7,000 kg (1) The manufacturer may modify the technical specifications without prior notice. (2) The speed may vary depending on the material and its quality, formats, and other production requirements.

Condition: excellent (used), The Freeman FUSING 48M is a professional machine designed for the thermal bonding of materials using temperature, pressure, and a conveyor belt. The device is used in the apparel, footwear, and leather industries, as well as in the production of laminated materials. Cjdpfx Acezgx Idoporh The machine enables the durable bonding of interlinings, adhesive layers, and other reinforcing materials to fabrics and leather. Thanks to adjustable temperature, pressure, and belt speed, it allows for precise adjustment of operating parameters to suit the material being processed. Technical specifications: Manufacturer: Freeman Model: FUSING 48M Serial number: 9315 Power supply: 220 V 1 phase (1PH) Temperature control Pressure control Belt speed control Heated conveyor belt Pressure gauge Feeding and receiving table Steel construction Manufacturer: The Louis G. Freeman Co., USA Applications: Bonding of interlinings and apparel linings Lamination of fabrics and technical materials Production of clothing and leather goods Bonding of materials using heat-activated adhesives Heat transfer and fixing of appliques

Condition: good (used), Year of construction: 1998, functionality: fully functional, Automatic Stream Feeder A-10-P: Pile Table, Mabeg Suction Head, Double Sheet Control, Suction Belt Table) Automatic Laminating Unit EK 78 (Waterbased & Thermal) Automatic BAT Sheet Seperator Max. Sheet Size X : 760 mm Max. Sheet Size Y : 1140 mm Min. Sheet Size X : 210 mm Min. Sheet Size Y : 210 mm Csdpfezv S N Tex Acpsrh Production Capacity Max : 50 m/min

Condition: used, Year of construction: 2013, table width 6000 mm table length 2000 mm burner heads 1 Equipment: - Plasma source Kjellberg Hi Focus 161i - suction unit - Compressor Technical data Kjellberg Hi Focus 161i plasma cutter: Cutting current at 100 % ED 10 - 160 A Marking current 5 - 25 A Cutting range 0.5 - 50 mm Piercing up to 30 mm Codpfjyk Dgzsx Acperh Dimensions (L x W x H) 985 x 570 x 1140 mm Mass 206 kg