Used Lamination Machine for sale (64,961)

Condition: ready for operation (used), Year of construction: 2024, feed rate X-axis: 5 m/min, The machine has already been dismantled and stored. TECHNICAL DETAILS Adjustable speed: up to 5 m/min Roller pressure: pneumatic Adjustable temperature EQUIPMENT Manual system Swiveling, patented control panel Monochrome display Automatic sheet separation Anti-curl technology Compact design Faster Foiling KIT Ultra-quiet compressor Console on wheels IVIVID Matrix Omni-Flow Feeder 380 High-stack feeder LC display Adjustable front air flow Central suction belt Note: Accessories are without guarantee. The principle applies: “Item purchased as seen.” The prospective buyer must verify the completeness of the item on site. Itjdpezb Ip Iofx Abvsh

Condition: excellent (used), Year of construction: 2003, Ref:11066 . 2003 Autobond105 THS. B1, single sided, fully automatic thermal laminator. Itsdpfx Absydnxnevjh Excellent condition run less than 1.5 million sheets! Equipped with; Heidelberg deep pile suction feeder with back separation 250mm (10) diameter highly polished chrome laminating roller Laminating nip pressure up to 6 metric tonnes Film is mounted on a quick change air shaft Trim slitter and perforating mechanism Pneumatic clutch ensures precise film tension Swiss made temperature control unit Sheeter - Integral bump roller separator with anti-curl bar Pallet delivery table. Accessories: Ioniser Pro static eliminator. Specification: Sheet size Max: 105 cm (40”) x 76 cm (30”) Min: A4 Paper weight 90 gsm (80lb) - 650 gsm (24 PT) Film Range - 8 micron virgin & 24 micron (1 mil) to 75 micron (3 mil) thermal Top speed 45m (150') per minute with rising pile feeder.

Condition: like new (used), functionality: fully functional, Equipment: compressor, Vivid Matrix MX370P Laminating/Sleeking Machine pneumatic pressure adjustment of the heating roller unwinding for sleeking film Faster Foiling Kit for sleeking max. speed 10 m/minute max. sheet width 370 mm max. sheet length 1200 mm standard with manual feeder Itsdpfx Abjzbrrgsvjh Optionally available: Vivid OmniFow Feeder 380 30 cm stack height max. sheet width 330 mm max. sheet length 380 mm Both are available on short notice.

Condition: excellent (used), Year of construction: 2017, The FOLIANT Pollux 760 SF High-Speed Compact Industrial Laminating Machine Year: 2017 Maximum sheet size: 760 x 1100 mm Minimum sheet size: 320 x 250 mm Maximum speed: 50 m/min Iodjzdyqzjpfx Abvoth Paper weight: 115 - 600 gsm Temperature control: 80 - 140 °C PALLET STACKER FILM LOADER Touch screen controls

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, GMP QTOPIC-380 F Hot laminator for single-sided lamination, Ijdpfjza Hdzsx Abvjth year of manufacture 2022 Working width 380 mm. Chrome roller 100 mm Ø. Thermal lamination up to 10 m/min. Single-sided lamination with de-curling device for perfectly flat sheets. Automatic sheet overlap for consistent results, independent of the operator. Working width 380 mm Films 25 - 44 microns, 58/77 core Paper thickness 120 g/m² ~ 350 g/m² Speed up to 10 m/min Heating time 5 minutes Pressure roller pneumatic Connection values 230 V, 2.8 kW Dimensions H x W x D in mm 1350 x 1700 x 720 Separation also possible for nylon films, pneumatic roller pressure with automatic stop at the end of the stack, including compressor. Sleeking (printing enhancement). Use of embossing rollers possible.

Condition: refurbished (used), Year of construction: 2014, operating hours: 10 h, functionality: fully functional, machine/vehicle number: SGSHK, compressed air connection: 6 bar, working width: 760 mm, warranty duration: 6 months, operating speed: 1,000 mm/s, Komfi Sagitta 76 with Hot Knife and B1 Stacker Robust and powerful machine suitable for lamination in continuous operation with a standard volume of millions of sheets per year. Designed for time-efficient work: feeding sheets from a pallet including easy placement of the pallet into the machine using laser pointers, elements for quick adjustment of the machine to a new job, air shaft, pneumatic snapping unit or hot knife for reliable separation of a wide range of foils. Also digitally printed job can be easily and conveniently processed on the machine. Well suited and highly applicable for both commercial printing and the packaging industry. Energy saving zone heating system with fastest heat up time. Max. production speed 60 m/min (3600 B1 sheets/h); 50 m/min with hot knife (3000 B1 sheets/h) Max sheet size 760 × 1120 mm (up to 1300 mm) Paper weight 115-600 g/m² Machine dimensions (incl. delivery desk) 4.25 x 1.55 m Basic configuration Feeder: Komfi double action feeding head for reliable feeding even at high speed and small format. Front lay register for precise and constant sheet overlap. Compressor for feeder. Sheet overlap sensor for protection of pressure roller from film sticking in case of a miss-feed. Adjustable separation blowers for reliable separation of sheets from the pile and trouble-free loading of long sheets. Laminating Unit: Powerful pneumatic pressure system to ensure excellent laminating result. Adjustable distance stoppers to enable processing thick substrates and windows lamination. Air shaft for 3″ reel core laminating film. ”On-the-fly” height-adjustable spread roller for perfect smoothing of difficult film before lamination roller. Zone heating of the laminating roller saves energy when laminating small formats. Temperature sensor inside the cylinder for extremely precise regulation. PUR pressure roller for longer roller life. Separator & Delivery: Rotary separation knives for reliable film separation at high speed. Built-in perforator to support trouble-free sheets separation, or to be used for special jobs where knife is not applicable. Pneumatic driven separation roller. Automatic (pneumatic) skew wheel increases reliability of separation when processing wide range of jobs. Good to use for long sheets. Adjustable speed of snapping roller for perfect separation of difficult jobs. Jogging table. SW functions included Stop on the sheet overlap to avoid waste sheets. Zero overlap possibility for processing thick substrates. Ijdpfx Abezdnpxovjth Automatic pressure and temperature detection to prevent irregularity in lamination quality. End of job function for easy rewind of film. Sensor for sheet separation detection and jam detection. Job settings memory Built-in internet connectivity for service support. Available options Film slitter to cut film to the requested width. Additional On roll perforator. Integrated or External Effect foiling device (OTF). Universal pallet positioning kit enables to load variety of different pallets into the machine. Hot knife option for perfect separation of thick, PET and Nylon films that eliminates flagging. Antistatic bar removes static charge from the separator to avoid thin sheets wrapping onto the rollers. Windows lamination kit. Set of chilling rollers placed between laminating unit and separator to reach high quality embossing or windows lamination. Automatic sheet stacker (pallet stacking).

Condition: new, Year of construction: 2021, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 3JUM178, compressed air connection: 6 bar, working width: 360 mm, warranty duration: 12 months, operating speed: 250 mm/s, Komfi Junior 36 Brilliantly simple, compact and easy to operate laminator for orders up to B3 sheet format. Despite its small footprint it provides professional high quality lamination in a cost-effective package. Automatic sheet separation using built-in perforator and unique Komfi design tilting separating mechanism. Speed 15 m/min = 2000 SRA3 sheets/h Max sheet size 36 x 80 cm Paper weight 115-350 g/m² Machine dimensions (delivery desk included) 277 x 77 x150 cm Basic configuration Feeder: Manual feeding, automatic overlap control, mis-feeding detection. Laminating Unit: IR heating with temperature sensor, adjustable spread roller, rubber-coated pressure roller, adjustable stoppers, pneumatic pressure system. Separator & Delivery: De-curling unit, film perforator, skewing wheel, snapping unit with fixed speed, fixed delivery desk. SW functions included Zero overlap option for thick sheets processing. Choice of measuring units. Intuitive user interface with built-in diagnostics and troubleshooting. Options Auxiliary piston compressor if central air supply is not available. External automatic sheet feeder for later upgrade. Teflon coated pressure roller with non-sticking surface to reduce film or duplex print marking. Airshaft for easier changeover of laminates. Film slitter to cut film roll to the required width. Additional On roll perforator. Effect foiling device with possibility to apply PSA film too. Itedpfx Aezdnnnobvjh 1″ unwinding shaft for effect films. Automatic skew wheel for reliable separation of difficult films. Air ionizer for smooth sheets unloading without static charge. Roll lift for comfortable handling of laminating film rolls.

Condition: good (used), Year of construction: 2009, Cutting width: 3700 mm. With glass loading and unloading device. Cutting system: heating and blade. Working height: 950 mm. Total length of the system: 4080 mm. Table width: 4020 mm. Width across the bridge: 4820 mm. Year of manufacture: 2009 Weight: approx. 6.2 t. Condition: good, second-hand Itsdpfx Ajxpnk Hjbvjh

Condition: excellent (used), type of input current: AC, input voltage: 230 V, Equipment: compressor, MATRIX MX 530 DP, double-sided thermal laminator, with foiling attachment. Complete with continuous feeder, touch screen controls, miss feed detector, air operated laminating pressure, auto sheet separation drop sheet delivery. It is a pneumatic model with a built-in compressor for high-quality lamination of digital print. Complete with the gilding attachment and second feed roller for double-side laminating. This machine is in good condition, just serviced and ready for work. We can arrange export packing and transportation. (quotation on request) Our price includes packing on a pallet and loading onto your transport. Payment in GBP in full before loading. Preferred payment method, bank transfer. Please do not hesitate to ask if you need further information. Specifications: Max sheet size 510 x 640mm Ijdpfor Ddu Iox Abvoth Min sheet size 200 x 300mm, Max speed 10m/min Film unwind shaft 75mm dia Temperature range 80-140 deg C Electrically heated laminating roller Electrical supply 220-240V, 50 Hz, 1 ph, 10A Machine weight 260kgs Machine size 1868L v 910W x1 285mmH

Condition: new, Year of construction: 2023, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 52DLT030, compressed air connection: 6 bar, working width: 560 mm, warranty duration: 12 months, operating speed: 650 mm/s, Komfi Laminator Delta 52 (Feeding Head) New, Manufactured 2023 Output / laminating speed 3-40 m/min *) (regard. technological conditions) Maximum output 8000 sheets /hr Average monthly capacity of machine: non-stop production environment Isdpfxjzb Eawo Abvoth Paper specifications Max. sheet size 560 x 800 mm Min. sheet size 200 x 200 mm Basic weight 115 x 600 g/ m2 Thickness of sheets max. 0.7 mm; Overlap > 0 Thickness of sheets max. 1.4 mm; Overlap < 0 Foil specifications Material polypropylen, polyester, nylon Thickness 24-50 μm Inner diameter of tube 3“ = 76.2 mm Outer diameter of roll 350 mm Single lamination - Delta Feeding with loading head Sectional two-zone heating Pressure roller PUR B Film unreeling - airshaft - Amiga 52, Delta 52 Pneumatic straightening Without knife Without cutting knives Separation pneumatic Power EU 3x 400V Frame and covers - ASxxP Compressor 25 Unwinding unit - Amiga 52, Delta 52 One-system feeding head 43 mm lift Drive chain - ASxxx Air blow gun

Condition: new, Year of construction: 2020, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 52AMG162, compressed air connection: 6 bar, working width: 560 mm, warranty duration: 12 months, operating speed: 400 mm/s, Komfi Laminator Amiga 52I (Intelligent In-Line Feeding) New, Manufactured 2020 Specifications: Max. speed of lamination: 25 m/min Max. output: 8000 sheets/h Min. sheet dimensions: 200 × 250 mm Max. sheet dimensions: 560 × 800 mm (or up to 1016 mm) Paper weight: 115-600 g/m² Paper thickness: Max 0.7 mm (with overlap > 0) / Max 1.4 mm (with overlap < 0) Max. paper pile: 6 cm (depending on sheet length) Thickness of laminating film: 24-50 μm; OPP, PET, Nylon Sheet overlap accuracy: ± 1 mm Feeder: Intelligent In-Line Feeding (connection with the PRinter) Itsdpezb Db Hofx Abvjh Laminating Unit: Adjustable distance stoppers for lamination unit to enable processing thick substrates and windows lamination. ”On-the-fly” side-adjustable unwinding shaft with adjustable brake force. Height-adjustable and removable spread roller perfectly removes wrinkles from laminate. IR heating for laminating cylinder. Temperature sensor inside the cylinder for precise regulation. Rubber coated pressure roller. The powerful pneumatic pressure system guarantees even nip pressure and perfect lamination results. Separator & Delivery: Decurling unit consisting of bar and roller with position control to move the snapping moment automatically when the position of decurler is changed. Built-in film perforator to enable sheet separation. Cam-driven separation roller with adjustable tearing action, delivery roller and sheet skewing wheel. Fixed delivery desk with adjustable air nozzles.

Condition: new, Year of construction: 2021, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 52AMG161, compressed air connection: 6 bar, working width: 560 mm, warranty duration: 12 months, operating speed: 400 mm/s, Komfi Laminator Amiga 52I (Intelligent In-Line Feeding) + OTF + Teflon Roller + AutoPilot New, Manufactured 2021 Specifications: Max. speed of lamination: 25 m/min Max. output: 8000 sheets/h Min. sheet dimensions: 200 × 250 mm Max. sheet dimensions: 560 × 800 mm (or up to 1016 mm) Paper weight: 115-600 g/m² Paper thickness: Max 0.7 mm (with overlap > 0) / Max 1.4 mm (with overlap < 0) Max. paper pile: 6 cm (depending on sheet length) Thickness of laminating film: 24-50 μm; OPP, PET, Nylon Sheet overlap accuracy: ± 1 mm Feeder: Intelligent In-Line Feeding (connection with the PRinter) OTF: Built in Over Toner Foiling unit Laminating Unit: Teflon Coated Rubber Roller Adjustable distance stoppers for lamination unit to enable processing thick substrates and windows lamination. ”On-the-fly” side-adjustable unwinding shaft with adjustable brake force. Height-adjustable and removable spread roller perfectly removes wrinkles from laminate. IR heating for laminating cylinder. Temperature sensor inside the cylinder for precise regulation. Rubber coated pressure roller. The powerful pneumatic pressure system guarantees even nip pressure and perfect lamination results. Separator & Delivery: Itjdpfx Abozb Da Aeveh Decurling unit consisting of bar and roller with position control to move the snapping moment automatically when the position of decurler is changed. Built-in film perforator to enable sheet separation. Cam-driven separation roller with adjustable tearing action, delivery roller and sheet skewing wheel. Fixed delivery desk with adjustable air nozzles.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Automatic Sheet Feeder A-20 (A-3): Mabeg Suction Head, Double Sheet Control Laminating Unit EK 104 (A-EK-3): Waterbased & Thermal Automatic Sheet Seperator TM-104 (TM-3) Seperating Unit: Quadruple Round Knife, Perforating Device Powder Spray Removal Device Ijdsrp D I Ijpfx Abvsth Automatic Stacker S-3 Max. Sheet Size X : 1040 mm Max. Sheet Size Y : 1140 mm Min. Sheet Size X : 210 mm Min. Sheet Size Y : 210 mm Production Capacity Max : 50 m/min

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Automatic Sheet Feeder A-4: Mabeg Suction Head, Double Sheet Control Laminating Unit EK-HL-4: Waterbased & Thermal Automatic Sheet Seperator UTM-4 Seperating Unit: Quadruple Round Knife, Perforating Device, Hot Knife Powder Spray Removal Device GK-4 Automatic Stacker S-3 Airjet-Dryer Iedpfx Abjrp D Nlevjth Max. Sheet Size X : 1040 mm Max. Sheet Size Y : 1420 mm Min. Sheet Size X : 210 mm Min. Sheet Size Y : 210 mm Production Capacity Max : 70-100 m/min

Condition: good (used), Year of construction: 2000, Automatic Sheet Feeder Automatic Laminating Unit EK 130/180 Automatic BAT Sheet Seperator Iodpfx Ajh H Dqhebveth Automatic Stacker Max. Size : 1300 x 1800 mm Production Capacity Max : 50 m/min Technical data can vary according to job, consumables and possible other factors

Condition: new, Year of construction: 2020, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 52AMG290, compressed air connection: 6 bar, working width: 560 mm, warranty duration: 6 months, operating speed: 400 mm/s, Komfi Laminator Amiga 52B (Bottom Suction Feeder) New, Manufactured 2020 Specifications: Max. speed of lamination: 25 m/min Max. output: 8000 sheets/h Min. sheet dimensions: 200 × 250 mm Max. sheet dimensions: 560 × 800 mm (or up to 1016 mm) Paper weight: 115-600 g/m² Paper thickness: Max 0.7 mm (with overlap > 0) / Max 1.4 mm (with overlap < 0) Max. paper pile: 6 cm (depending on sheet length) Thickness of laminating film: 24-50 μm; OPP, PET, Nylon Sheet overlap accuracy: ± 1 mm Isdpfx Abezbaxusveth Feeder: Bottom Suction Vacuum Feeder Laminating Unit: Adjustable distance stoppers for lamination unit to enable processing thick substrates and windows lamination. ”On-the-fly” side-adjustable unwinding shaft with adjustable brake force. Height-adjustable and removable spread roller perfectly removes wrinkles from laminate. IR heating for laminating cylinder. Temperature sensor inside the cylinder for precise regulation. Rubber coated pressure roller. The powerful pneumatic pressure system guarantees even nip pressure and perfect lamination results. Separator & Delivery: Decurling unit consisting of bar and roller with position control to move the snapping moment automatically when the position of decurler is changed. Built-in film perforator to enable sheet separation. Cam-driven separation roller with adjustable tearing action, delivery roller and sheet skewing wheel. Fixed delivery desk with adjustable air nozzles.

Condition: good (used), Foliant Mercury 760 NG Laminating Machine Itodpey Sd Trsfx Abvoh The most equipped laminating machine in Foliant’s offer. Fully automatic machine, ideal for digital printing houses. Very good condition, ready to work. Year of production 2019. Description: – feeding from a high stack, head on a servo motor (elevator) – automatic separator – pneumatic roller pressure – sheet straightening module – built-in Becker compressor – jogger on sheet collection – gilding module, rewinder Feeding system: servo motor head Max sheet size: 76×110 cm Min sheet size: 25×32 cm Max. capacity 1300 sheets B1 / h Max lamination speed: 20 m / min Temperature: 80 – 140°C Heating time 8 min Installed power: 6000 W -Power supply 380V Weight 810 kg

Condition: good (used), Laminating Machine Komfi Delta 76 Stacker Manufactured in 2016/2017. The machine is 100% operational and ready for operation. This is an advanced, high-performance machine, ideal for commercial laminating. The machine is in very good condition and ready for production. Technical specifications: Max sheet size: 760mm x 1120mm Min sheet size: 300mm x 220mm Min grammage: 115 gsm Max grammage: 600 gsm Operating temperature: 80-145°C Iedpfx Aboy Sd Tljvjth Max operating speed: 35m/min Built-in Becker compressor Weight: 2800kg 380V power supply Additional air supply: 6 bar Power consumption: 18kW Pneumatic clamping, separation, and automatic feeding from a high stack, automatic stacker. Touch panel for easy operation. Sheet straightening module. Tool kit and foil included.

Condition: ready for operation (used), Year of construction: 1998, Working width: 650-1305mm, exception PET/ALU/PE and ALU/PE: max. 1100mm, production speed: 120-220m/min, max. operating speed: 300m/min, max. primary unwinding roll diameter: 1000mm, core inner diameter cardboard core: 76/152mm, steel core: 150mm, adhesive application 2K for film/film: approx. 1.5-2.5g/m², 1K for paper/film: approx. 2.5-4g/m², max. secondary unwinding roll diameter: 1000mm, core inner diameter cardboard core: 76/152mm, steel core: 150mm, max. rewinding roll diameter: 1200mm, core inner diameter cardboard core: 152mm, steel core: 150mm, processable materials, min. polyester film: 10µm, min. aluminum foil: 6.6µm, min. PE film primary unwinder: 40µm, min. PE film secondary unwinder: 30µm, max. paper: 150g/m², length: 8625mm, complete documentation vorhanden. An on-site inspection is possible. Itodpfx Asy Uydfjbvsh

Condition: excellent (used), Year of construction: 2011, Year: 2011 Maximum sheet size: 530 × 740 mm Laminating speed: up to 25 m/min Automatic suction feeder Pneumatic roller pressure Automatic film cutting Compatible with gloss, matt, and soft touch films Short changeover time – ideal for short runs Itodpoxtxd Sofx Abvjh

Condition: good (used), Foliant Vega 400A Laminating Machine The most equipped laminating machine in Foliant’s offer. Fully automatic machine, ideal for digital printing. Very good condition. Year of manufacture: 2015. Description: – High stack feeding (elevator) – Automatic separator – Pneumatic roller pressure – Sheet straightening module – Built-in compressor for blowing and vacuum (Becker) – Jogger on the sheet outlet Feeding system: Pneumatic belt Feeding stack height: 30 cm Max. Capacity: 2100 B3 sheets/h Maximum lamination speed: 18 m/min Iedpey Nzkcefx Abveth Temperature: 20 – 140°C Heating time: 8 min Installed power: 3000 W Power supply: 230V Weight: 320 kg Made in the Czech Republic.

Condition: good (used), For sale is a professional laminator IBICO IL-12HR (A3). This device is ideal for offices, copy shops, schools, or small print shops. Technical specifications: • Manufacturer: IBICO • Model: IL-12HR • Type: Hot laminator (Pouch Laminator) • Max. laminating width: 320 mm (A3) • Operating voltage: 230V / 50Hz • Power: 1100 W Itedpfoufgn Iex Abvoh • Temperature range: up to 160°C • Multiple speed settings • Digital temperature display • Reverse function Condition: Used, fully functional. Normal signs of use (see photos). The device heats up correctly and operates reliably. Scope of delivery as shown. Advantages: • Robust metal construction • Suitable for continuous operation • Even heat distribution • Ideal for A3 and A4 documents • Also suitable for thicker laminating pouches

Condition: good (used), Laminator Bagel Digifav 520 B2 automatic laminating machine The machine is 100% functional, in perfect condition, ready for production. Very low mileage. It is an advanced, high-performance machine dedicated to digital printing houses. Production Spain. Technical data: Max sheet size: 520mm x 720mm Min sheet size: 220mm x 220mm Min weight: 130 gsm Max grammage: 350 gsm Operating temperature: 80-145°C Max working speed: 22m/min Weight: 750 kg Power supply 380V Iedoy Nfh Sspfx Abveth Additionally, 6 Bar air A steel, chrome-plated cylinder with a large diameter, filled with oil for greater operational stability. Pneumatic pressure, separation and automatic feeding from a high stack. Adjustable pressing force. Expanding shaft for attaching the foil, mounted on a tilting arm. Touch panel for easy operation. Sheet straightening module. Receiving table. Ask about the product

Condition: excellent (used), Now in stock at Glendale we have this GMP QTopic 380 Laminator with Foiling/Sleeking rewinder. Having been within a small digital implant, this laminator has had little use. The laminator is in perfect working order and includes the air compressor and foiling unit. Raising ordinary print work to 'extra-ordinary'.GMP QTopic 380 has been developed to meet specific print finishing requirements and built to exacting technical standards – with fully controllable pressure and heat processes, devised to deliver optimum results with today's digital print output. The GMP QTopic 380 offers pneumatic pressure which is required to get a great finishing when laminating and/or foiling is required. The pneumatic pressure is supplied by the integrated silent air compressor housed in the Qtopic 380 stand. This semi-automatic system is hand feed with automatic sheet separation. Capable of working at speeds up to 10 metres per minute the QTopic 380 can laminator over 1300 SRA3 per hour. Ijdpswi T Tvsfx Abvsth Turnaround times and waste are further minimised with the unique 'burst separation' system. The laminating film is micro-perforated on the edge by the robust marking device and then separated by the pneumatic burst roller. This easily separates the laminated sheets prior to the actual edge of the media, leaving clean and square datum edges from which to measure, cut, fold or guillotine. Faultless lamination. Class-leading lamination for the commercial and digital printer. Using state-of-the-art technology, combined with integrated pneumatic pressure, the QTopic 380 delivers superior bonding and faster production times – compared to standard systems. In addition, the fully adjustable heat and pressure combinations enable a wider range of laminates to be used with litho or digital printed media. Stunning foiling. For today's printers who demand stunning results with that extra ‘wow’ factor – the GMP QTopic 380 delivers more than just class-leading lamination. Metallic, coloured, patterned or holographic style foils can be added to digitally printed materials in either spot or flood treatments. This decorative effect traditionally would involve costly custom die production to create these effects. However, the QTopic can deliver instant and affordable results - and with upgraded pneumatic pressure, an even wider choice of media is now suitable for great results! Specifications Manufacturer GMP Model QTopic 380 Year 2021 Condition Refurbished Stock Number 114941 Laminating speed 1.5m to 10m/min Paper weight 110-400gsm Warm up time 5 minutes Laminating temperature up to 150° Temperature control Touch screen Speed control Touch screen Roller pressure Pneumatic Film core (mm / inches) 77mm 3" Electrical requirements 220/240v 50/60Hz Machine weight 187kg Dimensions L2010mm x W710mm x H1475 - all when in use

Condition: good (used), D&K Europa System B2 Laminator The machine is 100% operational and ready to use. This advanced, high-performance machine is ideal for commercial laminating. Technical specifications: Max sheet size: 540mm x 740mm Min sheet size: 210mm x 220mm Min weight: 115 gsm Max weight: 400 gsm Operating temperature: 80-145°C Weight: 750 kg Iodpfx Aoy Hgkisbveth 380V power supply Chrome-plated steel cylinder Pneumatic clamping, separation, and automatic high-stack feeding. Sheet feeding accuracy: ±2.0mm. Touchpad for easy operation. Sheet straightening module. Sheet discharge jogger.