Used Film Laminating Machine for sale (65,272)

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, PAPERPLAST DRY 70 - 102, Samal 102X114, including 70 pallets of BOPP film. Djdpfey Iy Nhjx Ap Iswc Year 2007 Currently in production in the UK Automatic thermal film laminator Automatic sheet feeder Vacuum infeed table Laminating unit with heated chrome cylinder ICS heating unit Sheet separation unit, pile delivery unit Usable working width (mm): 1020 Minimum size (mm): 250 x 280 Maximum size (mm): 1020 x 1400 Mechanical speed: 70 m/min. Size: 102 mm x 116 mm Minimum size: 30 x 28 cm, speed up to 70 m/min. + approximately 70 pallets of film (list of offered films in the attachment).

Condition: good (used), Autobond Mini 105 TPH-RU-SAB-VS Automatic Laminating Machine Dwsdpezz Hfysfx Ap Isc The most efficient machine on the market from a legendary manufacturer. This advanced machine boasts high performance thanks to an external heating thermostat. Made in Great Britain. Technical specifications: Max sheet size: 1060mm x 1060mm Min sheet size: 320mm x 285mm Min grammage: 115 gsm Max grammage: 650 gsm Operating temperature: 80-135°C Max operating speed: 120m/min Weight: approx. 4500 kg 380V power supply Additional 8 bar air supply Large-diameter, chrome-plated steel cylinder, filled with water for greater stability. Double-sided laminating Pneumatic clamping, separation, and automatic feeding. Adjustable pressure. High-stack feeding, Heidelberg Speedmaster feed head. Expansion roller for film fixing. Sheet straightening module. Stacker for sheet removal. The machine can operate in pallet-to-pallet or pallet-to-roll configurations. Two independent heating systems for two rollers, and a water-based sheet cooling system via rollers.

Condition: used, Year of construction: 2017, functionality: fully functional, total length: 3,820 mm, total height: 2,105 mm, total width: 2,010 mm, type of input current: three-phase, product height (max.): 380 mm, product length (max.): 2,000 mm, input voltage: 415 V, compressed air connection: 6 bar, input current: 43 A, working height: 1,105 mm, length of welding knife: 1,370 mm, passage height: 380 mm, overall weight: 1,180 kg, power: 26.7 kW (36.30 HP), film width: 1,350 mm, input frequency: 60 Hz, year of last overhaul: 2026, space requirement width: 2,010 mm, Equipment: documentation/manual, safety light barrier, For sale is a used Saropack / SMIPACK BP1402AS strapping machine with an integrated shrink tunnel, manufactured in 2017. The machine was used in our facility, regularly maintained, and is in fully functional and ready-to-use condition. Suitable for the automatic or semi-automatic packaging and strapping of various products with shrink film. Technical data: - Manufacturer: SMIPACK S.p.A. / Saropack - Model: BP1402AS - Year of manufacture: 2017 - Serial number: 63604 - Connection: 3PH + N + PE - Voltage: 380–415 V - Frequency: 50–60 Hz - Power: 26.7 kW - Current consumption: 43 A - Sealing bar: approx. 1,370 mm - Maximum product height: approx. 380 mm - Automatic and semi-automatic operation - Motorized film unwinding - Integrated shrink tunnel - Suitable for shrink film / LDPE film Condition: Dedpfxoz I Sz Re Ap Ijwc Used, regularly maintained, and fully functional. Normal signs of wear and tear consistent with age and use. The machine can be inspected and demonstrated in operation by arrangement. Location: Kestenholz, Switzerland Price: EUR 22,900 (negotiable) Transport and loading by arrangement.

Condition: used, Year of construction: 1997, functionality: fully functional, stack height: 1,000 mm, working width: 1,020 mm, For sale is a very well-maintained FK 102 S model from 1997, featuring pneumatic side guides, a dust removal calender, electronic overlap control, a film cutting device, an Achilles separator, and a Gemser stacker. The machine is suitable for both wet and thermal lamination. Minimum format: 250 x 360 mm Maximum format: 1020 x 1240 mm Material weight: 100-450 g/m² Dedpfx Aez Ai Dnsp Ijwc

Condition: refurbished (used), functionality: fully functional, type of input current: AC, input voltage: 400 V, D&K JupiterAutomated B2 Laminator Refurbished and in excellent working condition. Key features and specifications: - Model: D&K JUPITER 5474 (automatic laminating machine). - Controls: PLC with touchscreen interface; daily and total counters provided. - Pressure and handling: adjustable pneumatic pressure; automatic sheet separation via a bursting roller; adjustable anti-blocking during production. Dodezzmr Hepfx Ap Iowc - Heating: robust chrome-plated heated cylinder with oil bath. - Sheet size range: minimum 210 mm × 220 mm; maximum 540 mm × 740 mm. - Supported paper weights: 115 gsm to 450 gsm. - Feeder: automatic feeder with a stated capacity of 80 cm. - Film thickness: from 22 µ to 42 µ. - Operating speed: 30 meters per minute. - Electrical: 400 volts (3 × 16 A); power:7 kW. - Physical: dimensions H = 1400 mm × W = 1950 mm × D = 1200 mm; weight 650 kg.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 08011887520 CR, overall weight: 700 kg, type of input current: AC, input voltage: 400 V, total length: 2,250 mm, total width: 1,280 mm, total height: 1,450 mm, stack height: 500 mm, compressed air connection: 8 bar, working width: 520 mm, temperature: 150 °C, power of vacuum pump: 9,000 W, Equipment: CE marking, FORMICA Foliant 520 from 2008, in very good condition and available for sale. The machine has been well maintained and carefully operated throughout its service life. It has only been used for a few hours per day on average, resulting in limited usage and a well-preserved overall condition. Dwsdpfsz Hnkrox Ap Iec The FORMICA Foliant 520 is in very good working condition and is ready for continued professional production. Regular maintenance and careful operation have ensured reliable performance. Machine highlights: Manufacturer: FORMICA Model: Foliant 520 Year of manufacture: 2008 Very good overall condition Well maintained Limited daily operating hours Carefully operated Ready for continued production Inspection possible by appointment The machine represents a good opportunity to acquire a well-maintained FORMICA Foliant 520 from 2008, suitable for professional production and ready for further use. Further technical specifications, photographs and additional information are available upon request.

Condition: good (used), Laminating Machine Komfi Delta 76 Stacker Manufactured in 2016/2017. The machine is 100% operational and ready for operation. This is an advanced, high-performance machine, ideal for commercial laminating. The machine is in very good condition and ready for production. Technical specifications: Max sheet size: 760mm x 1120mm Min sheet size: 300mm x 220mm Min grammage: 115 gsm Max grammage: 600 gsm Operating temperature: 80-145°C Max operating speed: 35m/min Built-in Becker compressor Weight: 2800kg Dodszlgbpspfx Ap Iowc 380V power supply Additional air supply: 6 bar Power consumption: 18kW Pneumatic clamping, separation, and automatic feeding from a high stack, automatic stacker. Touch panel for easy operation. Sheet straightening module. Tool kit and foil included.

Condition: ready for operation (used), Year of construction: 2001, Used Ecotack thermal laminating machine Maximum sheet format: 102x142 cm Maximum speed: 75m/ minute Complete with vacuum register station Calender diameter: 450mm with oil heated central Roll elevator Automatic separator Dodpfxjzt R Ene Ap Iowc Spared rubberized roller Automatic separator Cooling roller with refrigerator Corrugated for light paper Automatic stacker

Condition: like new (used), Year of construction: 2010, functionality: fully functional, UV-Coating line, including drying unit for coating primer and protection lacquers as well as processing full sized finishings of digital printable media, running through with solvent-free UV-lacquers and direct lacquer curing with UV-radiation. A maximal plate height of 80 mm can be coated steplessly. Blobtra Devcmd Asi Njd Suitable for almost all surfaces within digital- and screen printing. High quality surfaces are guaranteed. Key Benefits - adjustable UV-power for individual setting up to the different coating requirements - EVG power supply unit for a building main fuse of 63 A. - central access for compressed air and electricity for the entire machine Application - varnishing of all firm materials up to height of 80 mm - applying of primer e.g. for glass or furniture surfaces - varnishing of all UV-printed plates - foil inscription for vehicles - lacquer and priming of many flexible materials - displays - digital pictures, luminous exposure - inkjet prints - colored coatings and many more Dsdpfx Apsvcmd As Iswc

Condition: refurbished (used), Year of construction: 2014, operating hours: 10 h, functionality: fully functional, machine/vehicle number: SGSHK, compressed air connection: 6 bar, working width: 760 mm, warranty duration: 6 months, operating speed: 1,000 mm/s, Komfi Sagitta 76 with Hot Knife and B1 Stacker Robust and powerful machine suitable for lamination in continuous operation with a standard volume of millions of sheets per year. Designed for time-efficient work: feeding sheets from a pallet including easy placement of the pallet into the machine using laser pointers, elements for quick adjustment of the machine to a new job, air shaft, pneumatic snapping unit or hot knife for reliable separation of a wide range of foils. Also digitally printed job can be easily and conveniently processed on the machine. Well suited and highly applicable for both commercial printing and the packaging industry. Energy saving zone heating system with fastest heat up time. Max. production speed 60 m/min (3600 B1 sheets/h); 50 m/min with hot knife (3000 B1 sheets/h) Max sheet size 760 × 1120 mm (up to 1300 mm) Paper weight 115-600 g/m² Machine dimensions (incl. delivery desk) 4.25 x 1.55 m Basic configuration Feeder: Komfi double action feeding head for reliable feeding even at high speed and small format. Front lay register for precise and constant sheet overlap. Compressor for feeder. Sheet overlap sensor for protection of pressure roller from film sticking in case of a miss-feed. Adjustable separation blowers for reliable separation of sheets from the pile and trouble-free loading of long sheets. Laminating Unit: Powerful pneumatic pressure system to ensure excellent laminating result. Adjustable distance stoppers to enable processing thick substrates and windows lamination. Air shaft for 3″ reel core laminating film. ”On-the-fly” height-adjustable spread roller for perfect smoothing of difficult film before lamination roller. Zone heating of the laminating roller saves energy when laminating small formats. Temperature sensor inside the cylinder for extremely precise regulation. PUR pressure roller for longer roller life. Separator & Delivery: Rotary separation knives for reliable film separation at high speed. Dwodpfx Aszdnpxop Iec Built-in perforator to support trouble-free sheets separation, or to be used for special jobs where knife is not applicable. Pneumatic driven separation roller. Automatic (pneumatic) skew wheel increases reliability of separation when processing wide range of jobs. Good to use for long sheets. Adjustable speed of snapping roller for perfect separation of difficult jobs. Jogging table. SW functions included Stop on the sheet overlap to avoid waste sheets. Zero overlap possibility for processing thick substrates. Automatic pressure and temperature detection to prevent irregularity in lamination quality. End of job function for easy rewind of film. Sensor for sheet separation detection and jam detection. Job settings memory Built-in internet connectivity for service support. Available options Film slitter to cut film to the requested width. Additional On roll perforator. Integrated or External Effect foiling device (OTF). Universal pallet positioning kit enables to load variety of different pallets into the machine. Hot knife option for perfect separation of thick, PET and Nylon films that eliminates flagging. Antistatic bar removes static charge from the separator to avoid thin sheets wrapping onto the rollers. Windows lamination kit. Set of chilling rollers placed between laminating unit and separator to reach high quality embossing or windows lamination. Automatic sheet stacker (pallet stacking).

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, color channels: CMYK, number of print heads: 2, We are offering this used Mimaki TxF300-75 DTF roll-to-roll printing machine and the accompanying Adkins dryer with powdering unit. Year of manufacture: 2024 Condition: Ready for use / currently still in operation. Otherwise, please see the photos. We also have other machines of the same design available. Dwodpfx Ajzn Iqqjp Iec If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: excellent (used), SMT Turning Lathe 80001350 This machine was designed and manufactured to produce rotor shafts for electric power tools. The machine was designed and manufactured to automatically perform the following operations: - Automatic loading/unloading of parts from/to the tool carrier line using a pick-and-place unit between the shaft ends. - Turning the ring seat + plunge cutting the commutator + turning the commutator. - Ring assembly - commutator side - Ring assembly - drive wheel side The machine has several production programs to manufacture different parts. Each program corresponds uniquely to a shaft type. Technical data Anchor shaft length from 92.5 to 163.1 mm Bearing journal diameter, commutator side: 8; 10; 12.5 mm Drive side: 12; 8 mm Min. available length at the bearing location: 3.6 mm Package diameter: 52; 55; 59 mm Ring dimensions Outer diameter: 40 - 57.4 mm Inner diameter: 37.4 - 56 mm Ring width: 4 - 8 mm Ring seat diameter: 44 - 50 mm Surface roughness of ring seat: Rz 20 mm Main dimensions and weight of the machine Machine length: 2870 mm Machine width: 2600 mm Machine height: 2530 mm Machine weight: 5000 kg Dwedpfjhw Emqex Ap Isc Electrical installation Rated current: 10 A Rated voltage (AC): 400 V Rated power: 7 kVA Rated frequency: 50 Hz Pneumatic installation Nominal pressure: 5 bar Maximum pressure: 10 bar You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: excellent (used), Year of construction: 2009, total length: 3,900 mm, total width: 1,450 mm, total height: 1,500 mm, overall weight: 1,500 kg, type of input current: three-phase, input voltage: 400 V, working width: 600 mm, Equipment: type plate available, For Sale: 2x Tromp Make-up, Rolling and Cutting Unit Machines These machines can be integrated into a laminating line, for example in a Tromp, Rademaker, or Fritsch line, etc. Inspection on location is possible. Dodsx Eb Abspfx Ap Iswc Specifications: - Length x Width x Height (each): 3900 mm x 1450 mm x 1500 mm - Conveyor belt - Module for dough rolling (for baguettes, etc.) - The module can be lifted if no rolled products are needed - Flour duster - Cutting unit for smaller rolled products - Moulder for dividing into 4 dough pieces - Mechanically adjustable height - Almost as new, well maintained - Delivered complete - Belt width: 650 mm - Working width: 600 mm - Output width / exit working width: 1x 800 mm and 1x 900 mm Price per unit: €50,000 Transport upon agreement If you have any questions or comments, please let us know. Best regards, Leo Holland

Condition: excellent (used), Now in stock at Glendale we have this GMP QTopic 380 Laminator with Foiling/Sleeking rewinder. Having been within a small digital implant, this laminator has had little use. The laminator is in perfect working order and includes the air compressor and foiling unit. Raising ordinary print work to 'extra-ordinary'.GMP QTopic 380 has been developed to meet specific print finishing requirements and built to exacting technical standards – with fully controllable pressure and heat processes, devised to deliver optimum results with today's digital print output. The GMP QTopic 380 offers pneumatic pressure which is required to get a great finishing when laminating and/or foiling is required. The pneumatic pressure is supplied by the integrated silent air compressor housed in the Qtopic 380 stand. This semi-automatic system is hand feed with automatic sheet separation. Capable of working at speeds up to 10 metres per minute the QTopic 380 can laminator over 1300 SRA3 per hour. Turnaround times and waste are further minimised with the unique 'burst separation' system. The laminating film is micro-perforated on the edge by the robust marking device and then separated by the pneumatic burst roller. This easily separates the laminated sheets prior to the actual edge of the media, leaving clean and square datum edges from which to measure, cut, fold or guillotine. Faultless lamination. Class-leading lamination for the commercial and digital printer. Using state-of-the-art technology, combined with integrated pneumatic pressure, the QTopic 380 delivers superior bonding and faster production times – compared to standard systems. In addition, the fully adjustable heat and pressure combinations enable a wider range of laminates to be used with litho or digital printed media. Stunning foiling. For today's printers who demand stunning results with that extra ‘wow’ factor – the GMP QTopic 380 delivers more than just class-leading lamination. Metallic, coloured, patterned or holographic style foils can be added to digitally printed materials in either spot or flood treatments. This decorative effect traditionally would involve costly custom die production to create these effects. However, the QTopic can deliver instant and affordable results - and with upgraded pneumatic pressure, an even wider choice of media is now suitable for great results! Specifications Manufacturer GMP Model QTopic 380 Dodpfx Aewi T Tvjp Ijwc Year 2021 Condition Refurbished Stock Number 114941 Laminating speed 1.5m to 10m/min Paper weight 110-400gsm Warm up time 5 minutes Laminating temperature up to 150° Temperature control Touch screen Speed control Touch screen Roller pressure Pneumatic Film core (mm / inches) 77mm 3" Electrical requirements 220/240v 50/60Hz Machine weight 187kg Dimensions L2010mm x W710mm x H1475 - all when in use

Condition: excellent (used), Overview Now in stock at Glendale we have this Refurbished Foliant Vega 400A Automated Laminator with Digital Foiling. This B3+ laminator has been fully refurbished to excellent working condition and is designed for heavy duty digital output and B3 litho lamination. The Vega 400A is a compact industrial laminating machine capable of speeds of up to 18 metres per minute, producing over 2,000 SRA3 sheets per hour. It features a deep pile vacuum feeder, high speed bump separator, and non-stick pressure roller, ensuring reliable feeding and consistent lamination quality across both digital and offset printed sheets. The system includes an adjustable twin decurl unit for offset and digital prints, a digital foiling module for foil, holographic, glitter, and spot-UV style finishes, and the optional jogger reception unit for neat sheet delivery. The integrated pneumatic compressor allows the machine to operate without any external air supply, making it a versatile and compact finishing solution. The system has seen light use within a small digital printing operation and has processed under 75,000 laminated sheets since new. Dsdjyxp Nxjpfx Ap Ijwc Key Features Rising pile vacuum feeder with belt head Built-in Becker vacuum pump Quick change film shaft with tension control Film capacity up to 3000 metres (22–42 micron) Inline trim slitter and perforating wheel Twin adjustable decurl system Heated chrome laminating roller Pneumatically adjustable pressure High speed bump separator Touchscreen control system Optional jogger reception included Why Buy the Refurbished Foliant Vega 400A? The Refurbished Foliant Vega 400A provides a highly productive and versatile laminating solution for print businesses producing both digital and offset work. Key benefits include: Production speeds of up to 18 metres per minute Output of over 2000 SRA3 sheets per hour Integrated digital foiling capability for premium finishes Twin decurl system for digital and litho prints Integrated compressor – no external air supply required Compact industrial footprint Fast warm-up time of under 10 minutes Optional jogger delivery included This system allows printers to produce high quality laminated products while also adding premium finishing effects such as digital foil and decorative lamination. Specifications Manufacturer Foliant Model Vega 400A Max sheet size 380mm x 660mm Min sheet size 200mm x 200mm Paper weight 115gsm - 500gsm Max speed 18 metres per minute Laminating roller pressure Pneumatic Feeder Automatic Suction Vacuum Belt Seperator Automatic bump rollers Decurl bar Standard - in run adjustable Air compressor Integrated as standard Warm up time 8 minutes Temperature range 80 - 140°C Jogger reception Included Power requirement 230/240v 50/60Hz Machine weight 370kg Machine dimensions with jogger (L)1980mm x (W)820mm x (H)1230mm

Condition: like new (used), functionality: fully functional, Equipment: compressor, Vivid Matrix MX370P Laminating/Sleeking Machine pneumatic pressure adjustment of the heating roller unwinding for sleeking film Faster Foiling Kit for sleeking max. speed 10 m/minute max. sheet width 370 mm max. sheet length 1200 mm standard with manual feeder Optionally available: Vivid OmniFow Feeder 380 30 cm stack height Dwodpfx Ajzbrrgop Ioc max. sheet width 330 mm max. sheet length 380 mm Both are available on short notice.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, single-sided lamination heated upper steel roller Dsdpozyk A Hefx Ap Iswc

Condition: excellent (used), Year of construction: 2013, operating hours: 3,525 h, functionality: fully functional, machine/vehicle number: 801213, type of input current: three-phase, input voltage: 380 V, LAMINA CLG 1816 CRASH LOCK FOLDER GLUER 1, 3 OR 4 GLUE POINTS • NORDSON • COLD GLUE & HOT-MELT LAMINA CLG 1816 Crash Lock Folder Gluer available for sale. Manufactured in 2013, this machine is equipped with a professional NORDSON gluing system and can operate with 1, 3, or 4 glue points, providing excellent flexibility for different box constructions and packaging applications. The machine can work with both cold glue and hot-melt adhesive. MACHINE SPECIFICATIONS • Manufacturer: LAMINA System AB, Sweden • Model: CLG 1816 • Machine type: Crash Lock Folder Gluer • Year of manufacture: 2013 • Serial number: 801213 • Gluing system: NORDSON Dwodjzyu Nqopfx Ap Isc • Gluing configurations: 1, 3 or 4 glue points • Adhesive: Cold Glue and Hot-Melt • Operating hours: 3,525 hours • Total boxes glued: 1,595,966 • Automatic feeding • Automatic folding and gluing LOW USAGE Although the machine was manufactured in 2013, it was used in production for only approximately one year. The machine currently shows: 3,525 operating hours 1,595,966 boxes glued This represents a relatively low level of use for an industrial folder gluer of this type.

Condition: ready for operation (used), Year of construction: 2004, ➢ Speed 10-80 m/min. ➢ Minimum Sheet Size: 22 x 30 cm ➢ Maximum Sheet Size: 72 x 102 cm Djdpsyzciksfx Ap Iewc ➢ Sheet Production: >10.000/h ➢ Sheet Weight SF: 100-600 g/m2 ➢ Adhevise Application SF: 1.5 – 4.0 g/m2 ➢ Working Width 72 cm ➢ Film Thickness 10-50 µM ➢ Film Roll Diameter 350 mm ➢ Energy Consumption 24/66 kW ➢ It is Very Good Condition ➢ Available Immediately.

Condition: excellent (used), Brand new / Showroom machine Automatic roll-fed encapsulation laminator with auto-feed, lamination, and cutting in one process Technical Specifications: Max. Laminating Width: 11" (279 mm) Laminating Speed: 39 inches per minute (approx. 99 cm/min) Maximum Output: Up to 240 sheets per hour Film Thickness Range: 1.5 to 5 mil Feeder Capacity: Up to 200 sheets Power Requirements: 110 V Controller: Digital panel Dimensions (W × L × H): 24" × 19" × 18" (approx. 610 × 483 × 457 mm) Cooling System: Included Stand: Optional Sleep Mode: Activates after 10 minutes Key Features: Compact design fits office or school environments One-button start; stops automatically when job is complete Dwjdpfx Aewrpd Nsp Ijc Up to 3x faster than pouch laminators Easy top access for quick cassette changes Integrated internal rotary cutter for safety Digital panel for setting margins and sheet count Film cassette lifts out for easy replacement Ideal for schools, offices, and print shops

Condition: good (used), Foliant Vega 400A Laminating Machine The most equipped laminating machine in Foliant’s offer. Fully automatic machine, ideal for digital printing. Very good condition. Year of manufacture: 2015. Description: – High stack feeding (elevator) – Automatic separator – Pneumatic roller pressure – Sheet straightening module – Built-in compressor for blowing and vacuum (Becker) – Jogger on the sheet outlet Feeding system: Pneumatic belt Feeding stack height: 30 cm Dodpfxozyz A Do Ap Iewc Max. Capacity: 2100 B3 sheets/h Maximum lamination speed: 18 m/min Temperature: 20 – 140°C Heating time: 8 min Installed power: 3000 W Power supply: 230V Weight: 320 kg Made in the Czech Republic.

Condition: used, Year of construction: 2022, PRODUCT TYPES: • Four side seal pouches • Quad seal pouches • Side seal pouches • Transverse zipper pouches • Gusset pouches • Bottom stick hole pouches • Micro-perforated pouches • Handle hole pouches • Round corner pouches MATERIALS: • LDPE • CPP • MCPP • AL • Nylon • PP • Laminated film structures MAIN TECHNICAL INFORMATION: Material thickness: 60–250 μm Max. web width: 1300 mm Max. roll diameter: 800 mm Core diameter: 3” and 6” Max. pouch width, quad seal: 400 mm Max. pouch length: 1000 mm Eye mark accuracy: ±1 mm Machine speed: 15–65 pcs/min Material speed: 40 m/min Main power: 400V, 50Hz, 3 phase Installed power: 100 kW Machine weight: approx. 18,000 kg Machine size: 33,500 × 4,200 × 1,800 mm POUCH SIZE RANGE: Quad seal / side welded width: 180–400 mm Gusset depth: max. 80 mm Minimum gusset depth: 30 mm Bag length: 360–1000 mm UNWINDING SECTION: • Air shaft unwinding • Magnetic powder brake • Dancing roller tension control • Servo-driven unwind system PERFORATION SYSTEM: • Micro perforation unit • Wheel type perforation • Additional perforation holes • Same type as existing machine configuration FOLDING SYSTEM: • Four side seal / quad bag folding wheel section SEALING AND COOLING SYSTEM: Mechanical press sealing system: Quad seal longitudinal sealing: 2 groups, 1010 mm Quad seal longitudinal cooling: 2 groups, 1010 mm Cross sealing station: 6 sets No. 1: K-seal No. 2: Gusset filling sealing No. 3: Cross seal, 740 mm length / 60 mm width No. 4: Cross seal, 740 mm length / 60 mm width No. 5: Cross seal, 740 mm length / 60 mm width No. 6: Cross cooling, 740 mm length / 60 mm width Additional 5 mm sealing section, upper and bottom PUNCHING SYSTEM: Tear slit / notch puncher 3-hole handle puncher Handle puncher: 20 × 80 mm, 3 sets Hole sizes: • 3 holes Ø20 mm • 20 × 80 mm • 24 × 77 mm Round corner puncher: 2 sets Puncher supports: 3 sets Bottom stick hole puncher: • 12 mm, 8 pcs • 16 mm, 8 pcs Vacuum system for punch waste removal DRIVE SYSTEM: Main motor: 3.5 kW Back draw roller servo: 3.5 kW Front draw roller servo: 3.5 kW Middle draw roller servo: 3.5 kW Longitudinal independent sealing servo: 5 kW × 2 Unwind servo motor: 1.5 kW × 1 / 3.5 kW × 1 Tension control servo: 3.5 kW × 1 Flying knife servo: 1.5 kW × 1 Manipulator sucker drive: 0.75 kW × 1 Finished product carrier counting drive: 0.75 kW × 1 CONTROL SYSTEM: • PLC control • 10” touch screen • Suitable for printed and unprinted bags • 16 temperature control zones • Individual temperature display • Temperature tolerance: ±2°C • High-sensitive eye mark sensor • Adjustable eye mark position STACKING SYSTEM: • Simple type stacking table • Static removal system • Automatic stop when machine stops • Alarm for bag output range: 25–100 bags • Step motor belt control • Belt width: 60 mm • Adjustable batch and belt length SAFETY SYSTEM: Dsdpfozf Nk Tex Ap Iewc • Safety light curtain • Emergency pulling rope • Emergency buttons every 2 meters • Individual emergency control INCLUDED OPTION: ZIPPAK transversal zipper attachment Transversal zipper unwinder and rewinder Innolock / Velcro zipper capability Tooling for 3 zipper sizes: • 180–220 mm • 230–300 mm • 310 mm Micro-perforation holes Bottom stick hole puncher Trim rewinders Chiller

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 36AMN, compressed air connection: 6 bar, working width: 360 mm, warranty duration: 12 months, operating speed: 420 mm/s, Komfi Laminator Amiga 3680 with HotKnife (NearLine, Generation 1) Showroom Machine, Manufactured 2025 Specifications: Min. paper format: 200 x 250 mm Paper weight: 115 x 600 g/ m2 Thickness of sheets max. 0,7 mm: Overlap > 0 Thickness of sheets max. 1,4 mm: Overlap < 0 Suitable kinds of film: Polypropylene, Polyester, Nylon Film thickness: 24-50 μm Dodpfx Aozh S Ugep Iewc Inner diameter of film reel: 3“ = 76,2 mm Outer diameter of film reel: 350 mm Output / laminating speed: 3-25 m/min(regard. technological conditions) Maximum output: - Average monthly capacity of machine: 100 000 B2 sheets Max. paper pile: 60 mm / length of sheet < 350 mm 30 mm / length of sheet > 350 mm Max. feeding table load: 20 kg Laminating temperature: according film manufacturer – max. 135°C Sheet overlap tolerance: ±1 mm Max. pressing force (0,6MPa): 15 kN Max. pressing force (0,8MPa): 19,5 kN (WARNING = limited life of the pressure roller) Max. linear NIP pressure, press 0,6 MPa: 60 N/mm / sheet width 250 mm 50 N/mm / sheet width 300 mm 41,6 N/mm / sheet width 360 mm Linear NIP pressure= 30 N/mm: sheet width 250 mm / 0,30 MPa sheet width 300 mm / 0,36 MPa sheet width 360 mm / 0,43 MPa Feeder: Bottom Suction Vacuum Feeder Laminating Unit: Adjustable distance stoppers for lamination unit to enable processing thick substrates and windows lamination. ”On-the-fly” side-adjustable unwinding shaft with adjustable brake force. Height-adjustable and removable spread roller perfectly removes wrinkles from laminate. IR heating for laminating cylinder. Temperature sensor inside the cylinder for precise regulation. Rubber coated pressure roller. The powerful pneumatic pressure system guarantees even nip pressure and perfect lamination results. Separator & Delivery: Decurling unit consisting of bar and roller with position control to move the snapping moment automatically when the position of decurler is changed. Built-in film perforator to enable sheet separation. Cam-driven separation roller with adjustable tearing action, delivery roller and sheet skewing wheel. Fixed delivery desk with adjustable air nozzles.

Condition: excellent (used), Year of construction: 2013, machine/vehicle number: 169083, 2013 Single Sided B2 D&K Europa Laminator Installed used April 2024 refurbished with new rubber rollers and temperature sensor Dodpfx Ajz E Nfuep Iewc Reason for sale - upgrading to double sided

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: Mini 76 TH, type of input current: AC, input voltage: 400 V, working width: 760 mm, AUTOBOND MINI 76 TH automatic laminator. 2015 Model. Fully refurbished. Dwsdpfxjzpw Ize Ap Ioc Max sheet size: 76 x 105cm Min sheet size: SRA4. Speed: 60 m/min. 22 million impressions. Heidelberg Feeder. Tool temp YCU. Jogger delivery. Optional post heat system.