Used Foam Machine for sale (64,973)

Year of construction: 1995, condition: used, Foam cutting machine, as shown in the pictures. Stored in a warehouse – under a roof. Disassembled. Sold without any warranty or guarantee. If you have any questions, I can send more pictures and dimensions. Iedpfxjz Iy Dgo Ap Djih

Year of construction: 2016, condition: good (used), functionality: limited functionality, The machine has been disassembled. It was in working order before disassembly. I have a video recording from before the disassembly. Sold as is, with no warranty or guarantee. Iedoz Iw I Aepfx Ap Deih

Condition: not inspected (used), Foam dispensing machine, manufacturer: Storopack, type: MD 50, year of manufacture: 2005, with dosing pump, weight: 225 kg, mobile. Iiedpfxsz R Np Ts Ap Dsh

Year of construction: 2017, condition: ready for operation (used), A foam bag system for packaging smaller and individually manufactured parts is available. Packaging capacity: 16 bags/min, film type: perforated, bag dimensions 1 X/Y: 470mm/400mm, bag dimensions 2 X/Y: 470mm/600mm. Machine dimensions X/Y/Z: approx. 500mm/500mm/700mm, weight: approx. 30kg, control: Instapak 901. Includes two component filler, spare parts, and foil bags. Documentation vorhanden. An on-site inspection is possible. Iiedpex A Hg Hofx Ap Doh

Year of construction: 2002, condition: used, Offered for sale is a CNC foam cutting machine. CNC control system with display, movable material table with guide rails, conveyor unit, electrical control cabinets with Lenze drive technology as well as safety fencing with safety light curtains. Inspection possible by arrangement. Iiedpfsz Rn D Ujx Ap Doh

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 3542, conveyor belt length: 2,200 mm, conveyor belt width: 2,200 mm, conveyor belt speed: 116 mm/s, total length: 4,000 mm, total width: 4,000 mm, total height: 4,500 mm, overall weight: 4,000 kg, discharge height: 3,500 mm, power: 7.2 kW (9.79 HP), type of input current: three-phase, input voltage: 380 V, input frequency: 50 Hz, pivoting range: 90 °, Equipment: documentation/manual, We offer the following used D.B. S.R.L. PCLO 2200 contour foam cutting machine, manufactured in 2007. Manufacturer: D.B. S.R.L. Model: PCLO 2200 Year of manufacture: 2007 Condition: used Category ID: 34 Type ID: 3028 Type: Contour Foam Cutting Machine If you have any questions or need more information, please send us a message or call us. Iedpfx Ajx T Ax Nep Deih

Year of construction: 2026, condition: new, Equipment: CE marking, Our company has been building foam cutting machines for over 15 years. The experience gained over the years of working on foam processing machines has allowed us to build the 4th generation of vertical machines RV 2500/2100 as well as the 3rd generation of horizontal contour lines SK3500. Our machines work on the Polish and European markets. The machines are designed and built in our company, the software is also our own. The materials used to build the machine are widely available on Polish and European markets. Our service works 7 days a week, providing a sense of security to our customers. Vertical machine left table 2100mm x 2600mm right table 2100mm x2600mm cutting height 1340mm Horizontal liner SK3500 rotary table 2200mm x2200mm Ijdsiqt N Iopfx Ap Deih cutting height 1250mm

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Knee Travel: Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Iodpsxxb Rrefx Ap Dsih Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2014, Type: CNC horizontal contour cutting machine Manufacturer: Fecken Kirfel Designation C56 Iodpfxsr Ilb Sj Ap Doih Year of construction: 2014 Dimensions: Cutting width 1300 mm Cutting length 1300 mm Cutting height 1300 mm Blade rotation of +/- 360 degrees Max. Cutting speed 25 m/min Info: Very well-maintained CNC contour cutting machine with revolving bandknife and automatic grinding device. High precision in the smallest of spaces. Very small footprint The machine is network-compatible and can be integrated into the Windows network. The machine is still in daily use and can be inspected by appointment. Further information on request Available immediately Disassembly and transportation must be done by the buyer. Please also note our other sales ads

Condition: new, Year of construction: 2025, machine/vehicle number: sn. 816, functionality: fully functional, total height: 3,500 mm, total length: 3,600 mm, total width: 4,000 mm, cutting height (max.): 1,300 mm, feed length X-axis: 2,600 mm, feed length Y-axis: 1,300 mm, space requirement height: 3,600 mm, space requirement length: 4,200 mm, space requirement width: 4,500 mm, warranty duration: 12 months, Polish manufacturer of machines and equipment for cutting and processing polyurethane foam with over 25 years of experience offers for sale a brand-new automatic horizontal cutting machine, Model: TYPE PARK. Iiodjwq Dvdopfx Ap Djh The machine features a stable and robust steel construction. Cutting is performed by the movement of the cutting frame along the X and Y axes, while the table remains stationary. The cutting frame is driven by two reinforced toothed belts and moves on linear bearings along the X-axis. In the Y-axis (up and down movement of the frame), the feed is powered by two ball screws and linear bearings. The machine supports both single-sided and double-sided cutting modes and includes an automatic cutting correction system for double-sided cutting. Machine equipment includes: Automatic, self-adjusting saw blade tensioning system Stationary table with powered conveyor belt for easy material loading Automatic cutting length measurement Quick-change system for the saw blade Automatic material clamping system Working parameters: Cutting width: 2100 mm Cutting length: 2500 mm The machine is fully enclosed with safety fencing and equipped with safety light curtains at the loading and unloading zones. As the manufacturer, we provide installation and servicing within the EU. The machine is CE certified. We also offer a wide range of machines and devices for cutting foam and mineral wool. We invite you to explore our full range of products.

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: Iodpfjx D Tbmsx Ap Dsih 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Type: Vertical cutting machine Manufacturer: Albrecht Bäumer Designation IS/M Year of manufacture: 1993 (2017-retrofit mechanical and electrical) Dimensions: Table to the left of the meter 2200 mm Table to the right of the measurer 2200 mm Cutting length 2580 mm Cutting height 1500 mm Side stop right 1200 mm Side stop left 1200 mm foldable motorized grinding unit height-adjustable blade guide Iisdpfsr Iirnsx Ap Djh Info: ISM vertical cutting machine from Bäumer in top condition The machine was completely overhauled by the manufacturer in 2017 (Retrofit Step 1-4) Machine is still in use and can be inspected by appointment. Further information on request Available immediately Disassembly and transportation must be done by the buyer. Please also note our other sales ads

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: MzBs001, Equipment: CE marking, Foam sealing machine, automatic upper and lower cover sealing machine, adopts PLC control,adjusts the tape to the sealing position through the adjustable handle,touches the screen to select the corresponding model and presses the start button to automatically seal the tape. The sealing effect is flat and beautiful, and the sealing is firm. It can be operated by a single machine or matched with an automatic packaging line. Widely used in food, fresh food, cold chain, e-commerce and other industries. Iisdpfsxu Agmox Ap Dsh

Condition: good (used), Year of construction: 2017, Traverses X Y Z: 355 x 305 x 455mm, Table 457 x 381mm, Spindle speed 50 – 6000 rpm, Spindle taper BT30, Iisdpsz St Hwjfx Ap Doh Spindle Motor 3Hp, Prototrak TMX Control, 8 Station ATC, coolant, Low Volt light.

Condition: repair required (used), functionality: limited functionality, Year of construction: 2017, machine/vehicle number: 2219, laser type: fiber laser, working length: 3,000 mm, working width: 1,500 mm, travel distance Z-axis: 120 mm, No minimum price – guaranteed sale to the highest bidder! The machine will be dismantled at the end of week 42. TECHNICAL DETAILS Laser type: Fiber laser Laser source manufacturer: IPG Laser source model: YLS-4000-CUT Laser source power: 4 kW Currently available cutting power: 2 kW Working area: 3,000 × 1,500 mm Z-axis travel: 120 mm Number of pallets: 2 MACHINE DETAILS Control system type: CNC control Level of automation: Automatic Type of operation: Electric Machine dimensions: approx. 4,000 × 8,000 mm Ijdoz N Dutjpfx Ap Doih EQUIPMENT 2-pallet changing table Note: Modules 1, 4, and 5 automatically lock after cutting and must be unlocked by IPG. The currently available cutting power is 2 kW.

Condition: good (used), Year of construction: 2016, Traverses X Y Z: 710 x 450 x 510mm, Table size 760mm x 430mm, table load 500 kgs, Iijdpfx Apez R Rbde Djh spindle speed 8000rpm, spindle motor power 20Hp, Siemens 828D Control with Shopmill, rapid feed XYZ axis 20m/min, Spindle taper BT40, 24 station ATC.

Condition: excellent (used), Year of construction: 2005, Basic data: Production year: 2005 Dimensions (LxWxH): 7580x4360x5120 mm Weight: 6000kg Operating voltage: 400/415V 50Hz Power consumption: 20kW Iijdpfxsrfn Rvs Ap Dsh Capacity at 20g/l: 1600kg/h Touch screen control panel Powder tank with screw feeder Complete documentation in both paper and electronic form (electrical schematics, CE compliance certificate, user manual) Condition: very good (machine clean and well-maintained, used exclusively for foaming white polystyrene) For an additional fee, our company can arrange transportation, as well as the installation and commissioning of the machine by our technicians at the location specified by the customer.

Condition: excellent (used), Year of construction: 2023, 400mm swing, 220mm max diameter, 490mm between Centres, Siemens 828 Control, Isdpfx Apjz Srv Do Djih 65mm bar capacity, 12 station VDI30 turret, 17kW Spindle Motor, Spindle Speed 4000rpm, 0.001 degree C axis, +/- 35mm Y axis, low volt light, coolant, Tool setter, Tailstock, swarf conveyor

Condition: used, Year of construction: 2021, machine/vehicle number: DW2110130101, functionality: fully functional, power: 32 kW (43.51 HP), input voltage: 380 V, input current: 85 A, type of input current: three-phase, workpiece length (max.): 3,000 mm, workpiece width (max.): 2,000 mm, workpiece height (max.): 30 mm, number of axes: 4, number of slots in tool magazine: 10, total height: 2,400 mm, total length: 4,300 mm, total width: 2,250 mm, overall weight: 2,000 kg, table length: 3,000 mm, table width: 2,000 mm, year of last overhaul: 2025, Equipment: CE marking, We offer this used Apollo 4AX 2030 CNC Router, year of manufacture 2021. Manufacturer: Apollo Model: 4AX 2030 Year of manufacture: 2021 Condition: used Machine type: CNC Router Iiodpfxjz Iz Ims Ap Deh If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 1980, condition: used, TAŚMÓWKI FOR FOAM BULLMER WERK 7759 Ijdpfecr Ru Djx Ap Dsih Location Gorzow Wielkopolski. Conditions of delivery Pick your own Cost of delivery Client cover startup type negotiated Description Comments MACHINE FOR CUTTING UPHOLSTERY FOAM ENGINE 1 kW, 220/380 VOLT, HAS A NOSE-STONES TO SAW TAPE LENGTH WITHOUT END 4050 mm, cutting width 1100 mm, table length 2250 mm, table width 1170 mm

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Paper cup machine Mold installed 6OZ-vending Max. speed 50 cup/min Iiodpfsz Rzb Hjx Ap Deh Production speed 40 cup/min New digital ultrasonic installed 2025 In fully working condition. Price EXW=additional cost for packaging, loading and transport cost's,

Condition: like new (used), Year of construction: 2009, functionality: fully functional, This automatic wrapping machine is specially designed for use with dry ice slices and/or blocks. All parts in contact with the product are made of stainless steel. Automatic pitch adjustment on the conveyor, and all motors are torque-controlled. The welding temperature is displayed and electronically controlled. The control panel consists of various instruments and visual alarms and is equipped with a self-diagnostic device. TECHNICAL DATA Working speed: Up to 25 wraps per minute, 25 meters of film per minute. Isdpfozxggljx Ap Dsih Product size: Max wrap width: 250mm, Max wrap height: 60mm, Wrap length: 40 to 260mm, 140 to 580mm and 200 to 800mm. Compressed air: 4 to 5 bars Version: standard version is right-hand Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, buy dry ice blasting machine, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, die cleaning without disassembly, paint removal dry ice, coating removal dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice

Condition: good (used), Year of construction: 2013, Traverses X Y Z: 1020 x 610 x 620mm, Table size 1200mm x 600mm, spindle speed 12000rpm, spindle motor power 14.7kW, Siemens 840DSL control with Shopmill, 43M/min rapids, Spindle taper BT40, 30 station ATC, through spindle coolant, swarf conveyor. Iiodez Eh Nlopfx Ap Deh

Condition: ready for operation (used), Year of construction: 2005, machine/vehicle number: 1.300.030.578, functionality: fully functional, overall weight: 5,000 kg, number of spindles: 8, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of milling spindles: 8 pcs. MACHINE DETAILS Voltage: 400 V Power consumption: 35 A Fuse rating: 50 A Empty weight: 5,000 kg Number of transport packages: 3 pcs. EQUIPMENT Iiedpfx Apez Nivvo Djh Documentation available Drilling tool available Tools included CE marking Type of milling table: beam table Material clamping system: pneumatic

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning length: 1,750 mm, spindle bore: 104 mm, spindle speed (max.): 1,800 rpm, type of input current: three-phase, Model:Prototurn 555 Swing Over Bed:560mm Distance Between Centres:1750mm Control: Prototrak SLX Isdpfxozrnkrj Ap Djih Spindle Speeds: To 1800 RPM Spindle Bore:104mm With: 300mm 3 Jaw Chuck Fixed Roller Steady Quick Change Toolpost Toolpost Holders Dimensions: 3940 x 2250 x 1910mm high Weight: 4100 Kgs