Used Glue Coating Machine for sale (65,004)

Condition: good (used), Year of construction: 1992, working width: 1,300 mm, Double-sided glue applicator / 2-roller glue applicator Manufacturer: AMOD / Bürkle Type CDL 1300 Suitable for double-sided glue application Working width 1300 mm With 2 new galvanized dosing bars Operating voltage 380 V 2-phase 50 Hz Control voltage 220 V Rated current 1 A Codpfx Aljv Sa Utj Rsrc Fuse protection 16 A (provided by customer) Including 2 additional glue rollers / good visual condition The machine will be technically inspected and cleaned upon order.

Condition: used, machine/vehicle number: 007650, Max working width: 450 mm Max. machinable height: 120 mm Gluing System: EVA Hotmelt Crodpfsu Evi Rjx Al Roc

Condition: used, machine/vehicle number: 007649, Max working width: 600 mm Csdpfxeu Eviqj Al Rsrc Gluing System: EVA Hotmelt

Condition: used, Year of construction: 2010, Used machine Year of manufacture: 2010 Features and technical data: Right-hand version 2 auxiliary tables are still in original packaging H&H / HARDO TH 1020-V46 BV DA (twin system) Maximum application width: 2,040 mm (2 × 1,020 mm) Design: Twin system, both machines can also be operated individually Application roller: reinforced version Application roller diameter: 46 mm Application roller knurling: 0.5 mm Bearings: reinforced roller bearings Bearing shells: hardened Scraper: pneumatically actuated, needle bearings Main bearing lubrication: routed externally, to be filled with a manual grease gun Container seal: adjustable and replaceable without removing the application unit Application speed control: via frequency converter Speed range: 3.2 – 19.3 m/min Control: potentiometer Display: digital speed display Pressure rollers: 2 pieces, silicone-coated Pressure roller length: 2,040 mm Pressure roller diameter: 159 mm Pressure roller actuation: pneumatic Automatic lowering of pressure rollers when drive motor is switched off Height adjustment for material clearance: electromechanically, manual inching mode Applicator unit stroke: 0 – 200 mm Conveying height: 925 mm (underside of material) Pressure roller drive: separate drive Motor: including motor mounting, fastening, and enclosure Additional application speed control: via separate frequency converter Additional speed range: 3.2 – 19.3 m/min Additional control: potentiometer Additional display: digital speed display Base frame: aluminium profile system Stands: 2 pieces, anodised aluminium plates Adjustable feet: adjustment range ±25 mm Material feed direction: right to left Crsdpfx Alsy E Avlj Rec Heating control: programmable timer (daily and weekly program) Temperature control: electronic with digital actual value display Melt tank capacity: 2 × 25 litres Heating power: 2 × 8.0 kW Nominal power: 18.5 kW Control voltage: 24 V Nominal frequency: 50 Hz Operating voltage: 400 V Phases: 3 Fuse: 63 A Compressed air connection: < 8 bar Application: Melting and applying non-reactive hot-melt adhesives Weight: 1,560 kg Availability: short-term Location: Rhineland-Palatinate

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Fe-Ma-Tech Bag Melter Glue Application Unit: - Type: advanced PUR 2 kg light eSmart - Year of manufacture: 2022 - TOP condition - Weight: approx. 70 kg - Dimensions: 550 x 430 x 970 mm - Type of glue pump: Gear pump - Pump nominal speed: 93 rpm - Base tank size (reservoir): approx. 1 liter - Melting capacity: up to 2 kg/h - Temperature sensor: PT100 device and external heating / optional Ni. 120 - Control accuracy: +/- 1°C The PUR 2 kg light eSmart bag melter is suitable for edge banding machines with lower adhesive consumption. Tank size is compatible with all standard PUR bag packages in sizes of 2-3 kg. Modular system: All components can be replaced individually. Simply remove the sheet metal cover to quickly access all relevant parts. Crsdpjw I S Eaefx Al Rjc Melting capacity up to 2 kg/h (depending on the adhesive and its viscosity). The solid PUR adhesive, wrapped in aluminum foil, is placed into the tank. The adhesive is gently melted as needed. A glue reservoir is located beneath the tank, holding up to 0.7 kg of liquid adhesive. From there, the adhesive is conveyed via a gear pump, through a FE-MA-TECH® hot-melt hose and heated application head (valve) into the application units (IMA, Homag, etc.). The system is completely airtight, allowing the adhesive to remain in the unit for several months when used properly. Shipping via freight forwarding is available for an additional €190.40 #8404

Condition: good (used), Year of construction: 1991, WOHLENBERG GOLF 370 Gathering and Perfect Binding Line Cedpfezbuh Dex Al Rerc Manufacturer Wohlenberg Buchbindesysteme GmbH, Verden Aller, Germany Production Year 1991 • Max. Size: 430x330 mm (16,9"x13,0") • Max. Speed: 6000 imp./hour • • ZTM 370 stacker • 12 automatic stations + 2 manual • Golf 370 gluer (1991/94 year of manuf.) • 15 clamps • hotmelt • Trim TEC 45I three knife trimmer (year of manuf. 2000) • 450 x 350 mm max • 120 x 100 mm min • 10,000 / hour • Availability immediately Sale Reason closing company Condition of the Machine functional, condition and wear and tear according to its age, well maintained not in daily production but can be seen running at your request

Condition: used, Year of construction: 2000, KOSME Extra Fix 16T rotary labelling machine for labelling bottles or other oval containers. Manufacturer: KOSME Model: Extra FIX 16T 1056 |S3 E2 + SL Year of manufacture: 2000 Cedpfx Aeywchlel Rjrc Capacity: up to 9,000 bottles/h Carousel: 16 stations Equipped with three cold glue labelling heads (front, back, and neck) Original electrical documentation. Technical condition: used machine, condition as shown in the photos.

Condition: good (used), functionality: fully functional, We are selling various used rollers here, which are used in laminating systems manufactured by Bürkle. All rollers are designed for a processing width of 1,300 mm. Type and condition are listed below. 1. Applicator roller for adhesive, 1,300 mm, ⌀ 240 mm, newly rubberized, price: on request 2. Applicator roller for adhesive, 1,300 mm, ⌀ 240 mm, newly rubberized, price: on request Crsdpovnaa Iefx Al Rjc 3. Applicator roller for adhesive, 1,300 mm, ⌀ 240 mm, newly rubberized, price: on request 4. Applicator roller for adhesive, 1,300 mm, ⌀ 240 mm, newly rubberized, price: on request 5. Applicator roller for hardener, 1,300 mm, ⌀ 240 mm, newly rubberized, price: on request 6. Applicator roller for hardener, 1,300 mm, ⌀ 240 mm, newly rubberized, price: on request 7. Applicator roller for hardener, 1,300 mm, ⌀ 240 mm, used, price: on request 8. Applicator roller for hardener, 1,300 mm, ⌀ 240 mm, used, price: on request 9. Metering roller for adhesive, 1,300 mm, ⌀ 180 mm, newly rubberized, price: on request 10. Metering roller for adhesive, 1,300 mm, ⌀ 180 mm, newly rubberized, price: on request 11. Metering roller for adhesive, 1,300 mm, ⌀ 180 mm, newly rubberized, price: on request 12. Metering roller for hardener, 1,300 mm, ⌀ 180 mm, newly rubberized, price: on request 13. Metering roller for hardener, 1,300 mm, ⌀ 180 mm, newly rubberized, price: on request All rollers are used and are sold without warranty.

Condition: good (used), - Type: AKLE-L 700 Csdpfx Aloru Dd Rj Rsrc - Year of manufacture: 2011 - Serial number: 0127930010 - 2 x available both are new unused

Condition: used, Coating machine SL-940 Used tools: SC350 + SC400, BlueWave200 20 machines available. Year of manufacture: 2022 and 2023 Crodpfx Alex Tgyws Roc Price from €33,000 Configuration on request.

Condition: used, Panning machine, Coating pan machine,Pralines and Drages, Used Machine Manufacturer: Walter Brucks Type: I Overall dimensions: 1200 x 1380 x 1800 mm Weight: 280 kg Electrical data: 400 V, 3 A Pan size: 1200 mm Ø x 650 mm Pan opening: 740 mm Ø Capacity / mixing: approx. 150 kg Cedpfx Asypvhzol Rorc

Year of construction: 2009, condition: used, Operational unit. Ask for additional details! Csdpfxey T E Uye Al Rorc

Condition: excellent (used), Year of construction: 2014, Roller coater BÜRKLE easy coater RCL 12M and UV system easy cure UV - TRUV with 2 lamps and 2 x roller conveyor BÜRKLE easy coater RCL 1300: For one-sided application on flat surfaces from above Operating side left Touch screen control TP 177 Micro Rubberized application roller Hard chrome-plated metering roller can be sensitively adjusted via worm gearbox Controlled belt transport with exposed counter roller for safe workpiece transport Quick-change system with split bearing and cross-disc coupling for easy changing of the application roller Oscillating squeegee, can be changed quickly for cleaning Separate, infinitely variable FU direct drives for application roller, metering roller and transport Reversible dosing roller Motors and limit switches in Ex version on the machine Non-Ex control cabinet and control panel outside the danger zone on the machine Mobile version Electrical preparation for integrating the roller coating machine into a coating line Technical data Working width: 1300 mm Workpiece height 3 - 80 mm Min. workpiece length 400 mm Rubberized application roller DM 240 mm Chrome-plated metering roller DM 172 mm Transport speed 2 - 15 m/min variable Connected load approx. 2.4 kW Cjdpfx Ajt Dx U Sjl Rerc Speed of metering roller 1.0 - 3.0 m/min Working height 900 mm (+/- 20) Safety equipment according to CE Incl. switch cabinet Weight approx. 1650 kg UV system e.a.s.y. cure UV - TRUV with 2 lamps One-sided curing of UV-curing lacquers on flat workpieces from above Incl. control cabinet Working width max 1300 mm Workpiece height max 80 mm Number of lamps 2 # - changed 10/2023 UV lamp power 120 W/cm² each Speed 2 - 15 m/min variable Transport: Transport carpet Exhaust air connection 2 x 250 mm Connected load 39 kW Weight approx. 750 kg 2 x roller conveyor RB 1300 Working width 1300 mm length 4000 mm Speed 2 - 15 m/min variable Connected load 2 x 0.37 kW Total system length 12450 mm

Condition: excellent (used), functionality: fully functional, Stork | Battering Machine / Coating Machine Manufacturer: Stork Device Type: Battering Machine / Coating Machine Mesh belt width: 600 mm Belt material: Stainless steel Overall dimensions: 3000 × 1100 × 1730 mm Codpfx Aley Uav Ue Rorc Construction: Stainless steel (acid-resistant) This industrial coating machine from Stork is designed for the automatic and uniform application of liquid batters (e.g., pancake batter, tempura, slurry) onto food products. The device is a key component in production lines that manufacture products such as nuggets, cutlets, fish sticks, schnitzels, and various types of snacks and molded products. Thanks to its universal mesh belt with a working width of up to 600 mm, the machine ensures high throughput and works perfectly with industrial formers, dry battering machines, and frying tunnels (fryers). Key features: - Efficient coating system: A special design allows for precise coverage of the product with liquid batter from all sides (from below through immersion, from above through a liquid curtain), guaranteeing perfect consistency and excellent adhesion for subsequent dry battering. - System for removing excess liquid: The machine is equipped with a mechanism (e.g., air blast or vibration system) that effectively removes excess batter from the product, preventing drips and saving raw materials. - Parameter adjustment: The ability to adjust the belt speed makes it easy to synchronize the machine with the rest of the production line.

Condition: good (used), Carbide coating machine, carbide coating device -Manufacturer: Carbumatic, hard metal coating machine -Type: unfortunately without a type designation -Voltage: 3 x 220-380 V / 50 Hz -Power: 0.4 kWA Cedpfx Aljy Edpyo Rsrc -Transport dimensions: 470/470/H380 mm -Weight: 49 kg/piece

Condition: ready for operation (used), Year of construction: 2003, machine/vehicle number: 10362, Brand: Burkle Model: SLC Machine no: 10362-01 Year of manufacture: 2003 Technical data of the machine (BURKLE SLC) General data - Type: SLC - Working width: 1300 mm - Working height: 900 ± 20 mm Workpieces - Workpiece characteristics: Flat, self-rigid - Workpiece width (max): Working width - Workpiece width (min): 350 mm - Workpiece length: 3 - 100 mm - Tolerance of the workpiece height over the entire working width: - Single track operation: ± 0.5 mm - Multi-track operation: ± 0.2 mm - Workpiece weight (max): 250 kg Piling material - Inspection material/cleaning agent with a self-ignition temperature: ≥ 200 °C Transport unit - Back pressure roller: See order confirmation - Rubber ring: See order confirmation - Diameter: 186 mm - Feed speed: 8 - 25 m/min Material circulation - Material pump feed capacity (double stroke): 575 cm³ Piling unit Piling roller - Rubber ring: See order confirmation - Diameter: 238 mm - Temperature (in case of optional heating/cooling application roller): Max 60 °C - Peripheral speed: Approx. 8 - 25 m/min Dosing roller - Diameter: 174 mm - Temperature (with optional heated/cooled dosing roller): Max 60 °C - Peripheral speed: Approx. 3 - 9 m/min Accuracy of application over the entire working width at: - Application rate > 10 g/m²: ± 5 %. - Application rate < 10 g/m²: ± 10 % Adjustment of the feed-through height - Feed-through height (max): 120 - 5 mm - Accuracy of setting: ± 0.1 mm Compressed air connection - Required air pressure: 6 bar - Compressed air consumption: Approx. 50 NI/min Dimensions / weights Cedev Hn N Uepfx Al Rsrc - Dimensions: See installation drawing - Weight at working width 700 / 1300 / 1600 mm: 1250 / 1450 / 1600 kg Electricity - Connection values, voltages: See data sheet for electricity Other information - Noise level: < 70 ± 4 dB (A) Table 1-4: Technical data for standard sizes of the machine (continued) Note: The speed is limited to a maximum of 20 m/min when the dosing roller and height setting are set to a safety distance exceeding 120 mm (cleaning coupling). Stock no: 2002443BXM

Condition: new, Year of construction: 2025, Advantages of Pre-glued Dowels • No additional glue required when inserting dowels • No cleaning required for the water supply system Advantages of the DübelJet • Recoil-free gun • Simple handling • Mobile handheld device • Universal application range Technical Data of the DübelJet Csdswu Dnnopfx Al Rsrc Dowel system and water supply system designed for pre-glued dowels • Dowel diameter: 8 mm • Dowel length: 35 mm (default setting, adjustable from 30 to 40 mm) • Dowel projection: 12 mm (default setting, adjustable from 7 to 20 mm) Universal application • Insertion of pre-glued dowels (with water), especially in furniture manufacturing • Insertion of positioning dowels (without water) made of wood or plastic, e.g., in frame construction or in combination with screws or cabinet connectors

Condition: new, Year of construction: 2026, Starter Packages Powder Coating Starter sets or individually designed packages for starting your own business in surface technology, e.g. for coating alloy wheels: The package includes two sample configurations for entering powder coating or expanding an existing business. Our focus is on customized consulting tailored to the customer’s budget and requirements. Modifications and special requests are standard with us. Proven, robust and low-maintenance technology is at the center of our offer. Set 1: - Powder curing oven, internal dimensions 2,000 x 1,900 x 2,000 mm - 150 mm thick mineral wool wall insulation for energy-efficient and cost-saving operation - 36 kW thermal output for rapid heat-up time - Oil, gas, or electric heating options - 6,000 m³/h recirculating air (2.2 kW) for efficient heat transfer to workpieces - Up to 220°C - Powder coating booth (open spray booth) Powder booth dimensions: - Width: 2,100 mm - Depth: 2,000 mm - Height: 2,200 mm - Fan: 6,000 m³/h, electric motor 3.0 kW for a clean working environment - Filters: 4 units, ø 325x600, cartridge type with interval-controlled self-cleaning - Secondary filtration via pocket filters - Powder coating system Wagner, manual system “Sprint 2 B” - Latest model from premium manufacturer Wagner for optimal coating results (other brands available upon request) - Corona manual gun - PEM-C4 Ergo - EPG-Sprint control unit - Powder feed system with Fluid Crown ST 550/10 - Powder injector PI-F1 - Equipment trolley with vibrating table Set 2: - Powder curing oven, internal dimensions 1,500 x 1,200 x 1,750 mm - 150 mm thick mineral wool wall insulation for energy-efficient and cost-saving operation - 14 kW thermal output for rapid heat-up time - Electric heating Cedpfx Alsbqk Nbo Rsrc - 2,600 m³/h recirculating air (1.1 kW) for efficient heat transfer to workpieces - Up to 220°C - Powder coating booth (open spray booth) Powder booth dimensions: - Width: 1,200 mm - Depth: 1,100 mm - Height: 2,380 mm - Fan: 2,500 m³/h, electric motor 1.1 kW for a clean working environment - Filters: 2 units, ø 325x600, cartridge type with interval-controlled self-cleaning - Secondary filtration via pocket filters - Powder coating system Wagner, manual system “Sprint 2 B” - Latest model from premium manufacturer Wagner for optimal coating results (other brands available upon request) - Corona manual gun - PEM-C4 Ergo - EPG-Sprint control unit - Powder feed system with Fluid Crown ST 550/10 - Powder injector PI-F1 - Equipment trolley with vibrating table

Condition: good (used), Year of construction: 2021, Machine installs elastic band pen loops to hardcovers for notebooks, agendas etc. . Fully automatic operation - glue application, elastic unwinding and cutting, elastic glueing, elastic folding and pressing. Machine is in good condition, still in production, tests possible. Discount when purchased together with the elastic machine. Credettavlopfx Al Rjc

Condition: ready for operation (used), Year of construction: 2003, Brand: Burkle Model: SLC Machine no: 10362-02 Year of manufacture: 2003 Technical data of the machine (BURKLE SLC) General data - Type: SLC - Working width: 1300 mm - Working height: 900 ± 20 mm Workpieces - Workpiece characteristics: Flat, self-rigid - Workpiece width (max): Working width - Workpiece width (min): 350 mm - Workpiece length: 3 - 100 mm - Tolerance of the workpiece height over the entire working width: - Single track operation: ± 0.5 mm - Multi-track operation: ± 0.2 mm - Workpiece weight (max): 250 kg Piling material - Inspection material/cleaning agent with a self-ignition temperature: ≥ 200 °C Transport unit - Back pressure roller: See order confirmation - Rubber ring: See order confirmation - Diameter: 186 mm - Feed speed: 8 - 25 m/min Material circulation - Material pump feed capacity (double stroke): 575 cm³ Piling unit Piling roller - Rubber ring: See order confirmation - Diameter: 238 mm - Temperature (in case of optional heating/cooling application roller): Max 60 °C - Peripheral speed: Approx. 8 - 25 m/min Dosing roller - Diameter: 174 mm - Temperature (with optional heated/cooled dosing roller): Max 60 °C - Peripheral speed: Approx. 3 - 9 m/min Accuracy of application over the entire working width at: - Application rate > 10 g/m²: ± 5 %. - Application rate < 10 g/m²: ± 10 % Adjustment of the feed-through height - Feed-through height (max): 120 - 5 mm - Accuracy of setting: ± 0.1 mm Crodpfjv Hw Hcex Al Rec Compressed air connection - Required air pressure: 6 bar - Compressed air consumption: Approx. 50 NI/min Dimensions / weights - Dimensions: See installation drawing - Weight at working width 700 / 1300 / 1600 mm: 1250 / 1450 / 1600 kg Electricity - Connection values, voltages: See data sheet for electricity Other information - Noise level: < 70 ± 4 dB (A) Table 1-4: Technical data for standard sizes of the machine (continued) Note: The speed is limited to a maximum of 20 m/min when the dosing roller and height setting are set to a safety distance exceeding 120 mm (cleaning coupling). Stock no: 2002442BXM

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: SN 1171, workpiece weight (max.): 450 kg, working height: 870 mm, feed rate Y-axis: 45 m/min, working width: 300 mm, warranty duration: 12 months, total length: 1,900 mm, height adjustment type: mechanical, overall weight: 450 kg, total height: 1,500 mm, total width: 1,300 mm, compressed air connection: 6 bar, Equipment: documentation/manual, The APACHE 3 is a cost-effective solution suitable for both craft and industrial applications, specifically designed for coating facade claddings and their supporting substructures. It is perfectly suited—without limitation—for coating profiles with cross-sections of 300 mm x 25 mm, providing flawless surfaces in a highly efficient and cost-saving manner, requiring no special prior knowledge from the operator. This unit can also be integrated into automated systems or coating lines. It can coat boards, profiled boards, tongue-and-groove boards, rhomboid profiles, laminated timber, and structural timber, as well as decking, garden, log cabin, sauna or privacy screens. Essentially, it's ideal for any product requiring a premium-quality visible surface. Substructures (typically black) can also be coated with low-viscosity, highly pigmented stains containing wood preservatives—even without lateral brushes. The APACHE 3 distinguishes itself from standard market products by its robust monoblock steel welded frame and a coating applied using a baking process with extremely resistant Teflon (enamel). This non-stick coating ensures self-cleaning, making the machine extremely low-maintenance. The machine offered is brand new and available for demonstration in our showroom. We would be pleased to demonstrate our machines and systems either on-site or at customer locations in your vicinity. For further information and a detailed description, please visit our SARMAX website. APACHE 3 Serial number: SN 1171 Flood coating unit with three (3) brushes Working width: 300 mm Working height: 100 mm Minimum workpiece length: 100 cm Feed speed, frequency-controlled: 10–45 m/min Number of driven transport rollers: 3 Diameter of transport rollers: 80 mm Brush arrangement: two (2) from above, one (1) from below Diameter of brushes: 160 mm Central brush drive: 2.2 kW Compressed air blow-off left/right, fan nozzles to clear tongue-and-groove: 80 l/min Double diaphragm pump: 90 l/min Compressed air consumption: 600 l/min Connection: CEE plug 16 A 400/50/3 V/Hz/P E Total power: 4.5 kW Working height: 900 +/- 50 mm Credpfx Aexhquxsl Rsc Approximate weight: 450 kg Operation: via control and indicator devices according to VDE, hydraulic ball valves Dimensions (L/W/H): 1,900 x 1,300 x 1,500 mm Standard: CE Color, design: grey 7046 RAL

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: NR: 220.10.029.19, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 28 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, Equipment: CE marking, documentation/manual, High-quality Format4 Tempora 60.06 EL edgebander for sale – ready to work! Take your production to the next level with this lightly used Format4 Tempora 60.06 EL edgebander in excellent condition. Built for industrial performance, this machine delivers outstanding precision and a flawless finish on every panel. - High-precision automatic edge banding - Pre-milling unit for perfect edge preparation - Reliable, consistent gluing system - Complete processing: trimming, milling, polishing - Easy operation and dependable performance Included extras: - Red air tank (as shown in the photos) - Additional heated glue pot – ideal for quick switching between different glue colors Carefully maintained, lightly used, and fully operational – ready to be put straight into production. Cjdpfjy Dg N Tex Al Rorc The machine is available due to factory restructuring. Contact us for more details or to arrange a viewing.

Condition: like new (used), A company is selling a wide variety of items due to liquidation. Machinery and miscellaneous items! Check out my other listings too! . Cedpfx Aljy Ahixe Rsrc A custom-made adhesive dispenser for sale. Works perfectly. Features multiple adjustment options.

Condition: good (used), Roller glue application machine, laminating machine, laminating system, laminating system, layering machine -Manufacturer: Hymmen, glue application machine, layer machine type 36 -Working width: 1300 mm -Roll diameter: Ø175 x 1300 mm / Ø235 x 1300 mm / Ø85 x 1300 mm -Individual components: see photos Crjdpfx Ajirnwbjl Rsc -Dimensions: 2230/1100/H1410 mm -Weight: 1260 kg

Condition: excellent (used), Year of construction: 2009, operating hours: 110 h, functionality: fully functional, type of input current: three-phase, overall weight: 3,500 kg, Coating and laminating system. For paper and film. Rewinding and unwinding with automatic web edge and web tension control. Laminating unit is cooled. Max. 30 m/min. Working width 650 mm. The machine was only used in the laboratory for tests. Only 110 operating hours since new Hotmelt or dispersion can be used. Hotmelt is melted in a separate extruder and fed to the application unit via a heated hose. Roll or reverse roll is possible. Powerful IR dryer . Exhaust air system and cooling unit can be included. Ma. Roll diameter 800 mm. Core 3 1/2 ". Pneumatic winding shafts. Crjdpfx Alort Iqbe Roc