Used Glue Coating Machine for sale (65,948)

Condition: excellent (used), Year of construction: 2011, I sell the 2-cylinder roller coater Cefla Sorbini Smartcoater SP1. Year 2011 Iedowink Nspfx Ahyjht Working width 1300mm Suitable for wet on wet, stains, primers and sealers coating application. Very good condition. Fully working. Available immediately.

Condition: excellent (used), Year of construction: 2009, I sell the 2-cylinder roller coater Cefla Sorbini Smartcoater SP. Year 2009 Working width 1300mm Ihodpfx Aheg D Uuijyot Suitable for wet on wet, stains, primers and sealers coating application. Very good condition. Fully working. Available immediately.

Condition: like new (used), Year of construction: 2003, Texture application machine SORBINI T20-3 STP Сharacteristic Length, mm - 6300 Width, mm - 2500 Working width, mm - 1200 Height, mm - 1700 Ihsdpeh Tfdrjfx Ahyst Number of nodes, pcs - 3 Number of shafts, pcs - 6 Total power of engines, kW - 13,50

Condition: excellent (used), Edge banding machine FORMAT 4 Tempora 60.06 glueBox - used Touchscreen, pivoting control panel, program memory, automatic pressure bridge adjustment, feed via conveyor chain, extendable workpiece support, diamond jointing cutter for up- and down-feed, glue pot located underneath, glue pot changing device, use of PUR adhesives possible, GLUEBOX, printing unit with driven roller, cross-cut saw with 2 HF motors, pneumatically pivoting cross-cut saw, flush/radius trimming unit, motorized positioning control of the trimming unit, Ijdpfxou R S Nws Ahyoht x-motion PLUS, corner rounding unit with diamond-coated cutter, radius scraper, radius scraper with motorized positioning, surface scraper, operation-controlled Surface scraper, Inlet barrier, Release agent spray device, Lubricant spray device, Cleaning agent spray device, Year of manufacture 2022 ----- Technical specifications ----- Edge thickness for rolls: 0.4 - 3 mm, Edge thickness for strips: 3 - 6 mm, Workpiece thickness: 8 - 60 mm, Min. workpiece length: 140 mm, Feed speed: 10 m/min., Screen diagonal: 15 inches, Dimensions of jointing cutter: D 80 x 64 mm, Joining cutter power: 1.1 kW, Crosscut saw power: 0.35 kW, Milling station power: 0.75 kW, Extraction nozzle Ø: 80 + 160 mm, Compressed air connection: 7 - 10 bar, Total length: 4,872 mm, Dimensions (LxWxH): 4,872 x 1,511 x 1,468 mm, Weight: 1,500 kg Quality information: - All settings checked - Adjusted according to manufacturer's specifications - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatic system checked - Ready for immediate use

Condition: good (used), Sumbel Perkeo Edge Gluer This machine is fully operational and ready for production. This is the most valued brand among small laminators. Ideal for the production of covers, decorative packaging, etc. Made in Germany. The machine uses cold glue. Copper rollers. Iedsx A Sdqepfx Ahyoht Smooth adjustment: glue thickness and gap width. Set of separators. Easy cleaning without the need for tools. 230V power supply. Weight: 15kg. Roller width: 60mm.

Condition: good (used), Year of construction: 2007, Max. pane height: 2700 mm. Connected load: 400V AC/50Hz/3.1A Total length with inlet and outlet: approx. 7700 mm. Max. height: approx. 4200 mm. Iodsxq Rp Ijpfx Ahyeht Weight: 2550 kg. Condition: good, second-hand.

Condition: excellent (used), Year of construction: 2022, Detailed specs in the pictures and below. Description: 1.Equipped with full color touch screen monitor, main machine, transfer and conveyor can control the speed automatically and synchronization trace parameter setting system. 2. The machine adopt movable and adjustable operating function in each section .Equipped with elaborate tooth lever design. It is simple, convenient and efficient for one man operation. 3. High power stepless speed control frequency conversion and high-efficiency power motor, the highest speed can reach 400 meters/min, power transmission adopts powerful belt transmission, with low noise, high efficiency, easy maintenance and economic efficiency. 4. Each functional components of the machine adopt modular design, which is convenient to assemble, convenient to replace and debug products, convenient for beginners to master technology, and easy to learn. 5. Unique design of the upper and lower glue tank and coordinate with the need of products. Ihodpfxenlag Is Ahyet 6. Compression and conveyor section equipped with adjustable the pressure design according to the needs of the products. Equipped with a set of special soft belts to ensure uniform pressure and perfect quality. 7. The machine adopt photoelectric counting, which can be used for total or quantitative counting, and equipped with kicker mark recognition device.

Condition: used, Thickener: Max planing width: 410 mm Min planing height: 3 mm Max planing height: 240 mm Min length of planed piece: 180 mm Knife shaft diameter: 100 mm Number of knives: 4 2 feed speeds: 7/14 m/min Knife shaft rotation: 5000 rpm Manual adjustment of working height Equalizer: Total length of worktops: 2200 mm Adjustable tops Knife shaft silencing Knife shaft guard Extraction spigot: 120 mm Culaga tilting 0-45° Culaga length: 1200 mm Power supply: 400 V Motor power: 4 kW Ihsdsq R Rkrspfx Ahyst Overall dimensions: Length: 2200 mm Width: 860 mm Height: 1130 mm

Condition: like new (used), Thom Type SI Spout Inser­ter Machi­nes for inser­ting the spouts into pre­fa­bri­ca­ted pou­ches. Model - Thom SI‐900 Ihsdpex Utd Eefx Ahyot Semi­au­to­ma­tic machi­ne Ide­al for sam­ple pro­duc­tion and small series pro­duc­tion Capa­ci­ty: Up to 10 pou­ches / min. Thom fil­ling and packa­ging machi­nes are in demand ever­y­whe­re whe­re fle­xi­ble packa­ges need to be fil­led (pou­ches / refills): in the food indus­try, the cos­me­tics and deter­gents indus­try or in the beverage fil­ling.

Condition: excellent (used), Year of construction: 2021, turning diameter over cross slide: 840 mm, turning length: 6,000 mm, spindle bore: 105 mm, rapid traverse X-axis: 5,000 m/min, rapid traverse Y-axis: 7,000 m/min, 3 chuck SCHUNK ROTA-S Plus 500-102 3 x Steady rest fixed Revolver VDI Duplomatic Siemens 840 DSL This type of lathe is commonly used in industries like: Oil & gas (pipe threading, tool joints) Steel industry (roll turning)  Power generation (turbine shaft turning)  Heavy machinery manufacturing Ihodpfjx Sqaxox Ahyst DBC Turning Length: 6000mm Swing over bed Ø: 840mm Swing over cross slide Ø:570mm Spindle bore: 105mm Spindle power: 33kW Bed width: 450mm Tailstock spindle Ø: 220Ø Spindle taper: 5Mk Speeds / ranges: 1200Rpm Feed rate X-Axis: 5000mm/min. Feed rate Z-Axis: 7000mm/min. Workpiece load: 2500 Length: 9500mm Width: 2300mm Height: 2300mm Weight: 8600kg

Condition: new, Year of construction: 2023, functionality: fully functional, 5-axis travelling column machining centre - SAMAG SFZ3500- with swivel head and internal rotary table (Ø:1000mm, interference Ø:1300mm) X:3500mm Y:1000mm Ihjdpfxjttv Haj Ahyet Z:1000mm Spindle: SK50 max. 12,000rpm 54kW Tool changer: 60 Control: Heidenhain TNC7 Coolant system with paper belt filter Internal coolant supply: 40bar (max. 80bar) Internal air supply through the spindle 3D touch probes Collision monitoring (DCM) Kinematics Opt The machine is available at short notice and can be inspected and tested at the factory.

Condition: good (used), Year of construction: 2001, In good technical condition and fully operational. Manufacturer: Rollsett Machine Oy Finland. Year of manufacture: 2001. Profile height: 18 mm. Entry width: 1,250 mm. Overall width: 1,146 mm; 1,166 mm. Construction width: 1,100 mm. Min./max. length: 0.5 lm/8 lm at a thickness of 0.50 mm. Accessories, aids: screws, sealing tapes, profiled seals, anti-condensation treatment, light profiles. Ihsdpfx Asx Tf Itshyot

Condition: ready for operation (used), Year of construction: 2007, XYZ SMX SLV 3 Axis Turret Milling Machine ProtoTRAK | SMX Control (2007) 3 Axis CNC Capacity (X Axis, Y Axis & Quill) Spindle Taper ISO 40 Spindle speeds to 70 - 3600 RPM Table Size 1473 x 305mm Table Travel: X - 1000mm Y - 410mm Knee Travel: Z - 413mm Quill Travel Z - 127mm Air Power Draw Bar Ijdpfx Ahjx Tiq Soyeht Supplied with a range of spindle tooling Coolant Year of Manufacture: 2007 Weight: 1850 Kgs Power Requirements: 18A *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79109 Machine Serial Number: 12308 Cost: £14,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 3,500 mm, total length: 7,050 mm, total width: 4,100 mm, volume flow: 36,000 m³/h, temperature: 80 °C, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), Equipment: cabin, lighting, Paint and Drying Booth Isdpexa H Ewefx Ahyjht It is the centerpiece of your entire painting operation: the combined paint and drying booth. (Alternatively available as a separate paint booth with a dedicated dryer.) Our solutions feature full-surface ceiling filters and, optionally, full-surface floor extraction with drive-over grating or wall extraction at the position of your choice. If you wish to further increase the efficiency of the system beyond heat recovery and infinitely variable control via frequency converter, we can also offer you a sectional control system. This enables you, for example when doing spot repairs or partial booth loading (such as painting only add-on parts), to activate only the section where the parts are located. This allows you to operate with a reduced air volume, save energy, and minimize costs, all without compromising quality. Feel free to contact us – we would be happy to demonstrate these options in detail. Do you have any questions or suggestions? We are happy to assist you.

Condition: new, Year of construction: 2025, total height: 4,000 mm, total length: 7,000 mm, total width: 3,000 mm, warranty duration: 24 months, temperature: 80 °C, air demand: 36,000 m³/h, input voltage: 380 V, heating capacity: 345 kW (469.07 HP), power: 40 kW (54.38 HP), fuel: liquid petroleum gas (LPG), energy consumption: 40 kWh, insulation material: Mineralwolle, insulation thickness: 50 mm, nominal power: 345 kW (469.07 HP), Equipment: lighting, MAIN STANDARD Our paint booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. Booth processes are managed via a PLC system, ensuring that desired values are maintained consistently. OPERATING PRINCIPLES OF THE BOOTH The booth’s processes are managed through a control panel, which oversees the following steps: PAINTING PROCESS During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled through the extraction unit. Floor filters (paint stop filters) collect paint particles, and the air passes through final exhaust filters before being discharged. FLASH-OFF PROCESS After painting, the booth continues operating for approximately 15 minutes to purge residual solvents and thinners. During this phase, fresh air circulates from outside into the booth. DRYING PROCESS In this stage, 80% of the air passing through the booth is heated to 60°C and introduced via a distribution system. Since 20% of the solvent is released during drying, it is expelled with the exhaust air. Industrial coatings are typically dried at 60°C, but the booth temperature can be adjusted as needed via the control panel. COOLING PROCESS After the 30-minute drying cycle, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the subsequent 5-minute cooling phase, fresh air from outside circulates through the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels govern the functions and operation of machines and devices housed within the booth. The panel is made of durable galvanized sheet and steel profiles and is fully enclosed to protect against dust and moisture. Electrical Equipment and Control Panel: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the control panel and motors or other electrical devices. Isdpewzmcbsfx Ahysht • Electrical wiring is designed to accommodate booth relocation if needed. • Operating equipment uses 380 V 50 Hz, while control devices operate at 220 V. • The booth’s operation time can be monitored on the electronic control panel, enabling straightforward maintenance scheduling. • Temperature and time settings for booth ventilation (solvent flash-off), intermediate drying, and final drying can be easily adjusted to required values on the digital display of the electronic control panel. • Users can monitor and adjust the drying time using the heating thermostat and time relay.

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 5,600 mm, total length: 11,200 mm, total width: 5,100 mm, type of input current: three-phase, warranty duration: 24 months, inner dimension height: 4,970 mm, inner dimension length: 11,000 mm, temperature: 80 °C, inner dimension width: 5,000 mm, air demand: 52,000 m³/h, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), power: 45 kW (61.18 HP), fuel: liquid petroleum gas (LPG), input frequency: 50 Hz, energy consumption: 45 kWh, insulation thickness: 50 mm, nominal power: 250 kW (339.91 HP), sheet thickness steel (max.): 2 mm, Equipment: lighting, * Air Preparation Unit: The air preparation unit is a recirculation system that supplies the cabin with filtered fresh air and exhausts used air during the painting process. It heats the air to 60 °C, mixes the used air with 10% fresh air via an automatic multi-damper system, and reheats the air before routing it back into the cabin. The air is heated using a burner and a heat exchanger, both made of high-quality 304 stainless steel and housed within the fresh air unit. During painting, the air is filtered twice (via front and ceiling filters) before it enters the cabin. The contaminated air is also filtered twice (through inlet and outlet filters) before it exits via the exhaust unit. Air preparation units are insulated like the side walls to minimize heat loss and are protected against potential vibration and noise thanks to rubber seals on the covers. The exhaust air is regulated by a damper in the outlet duct, which helps control the internal pressure of the cabin. * PRINCIPLES OF CABIN OPERATION: The processes in the cabin are controlled via a control panel that manages the following steps: * PAINTING PROCESS: During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled by the extraction unit. Floor filters (paint stops) capture paint particles, and the air passes through the final exhaust filters before being discharged. * FLASH-OFF PROCESS: After painting, the cabin operates for approximately 15 more minutes to purge residual solvents and thinners. During this phase, fresh air from outside continues to circulate in the cabin. * DRYING PROCESS: In this phase, 80% of the air passing through the cabin is heated to 60 °C and supplied to the cabin via a distributor. As 20% of the solvent is released during drying, these solvents are expelled with the exhaust air. Industrial coatings are typically dried at 60 °C, but the cabin temperature can be adjusted via the control panel as required. * COOLING PROCESS: Isdpfewzl Hxsx Ahyoht After the 30-minute drying process, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the 5-minute cooling phase, fresh air from outside circulates in the cabin, after which the system stops automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT: These control panels manage the functions and operation of all machinery and devices inside the cabin. The control panel is constructed from durable galvanized sheet metal and steel profiles and is fully enclosed to protect against dust and moisture. Electrical devices and control panels: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control lines between the panel and motors or other electrical devices. • Electrical wiring is designed to allow for cabin relocation if necessary. • Operating devices use 380 V 50 Hz, while control devices use 220 V.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: PEF-2.5 PULVER EINBRENNOFEN ELEKTRISCH, temperature: 230 °C, heating capacity: 30 kW (40.79 HP), inner dimension length: 2,500 mm, inner dimension width: 1,505 mm, ✈️ Plus shipping costs – Shipping available upon request.✈️ Ihjdpfx Aswfgbrehyst Fast delivery: Only 6 weeks after receipt of payment! ✅✅✅Energy Class A+++✅✅✅ ✅ Plug & Play system – Delivered fully assembled, ready to use immediately! ✳️ Maintain your liquidity! We offer a variety of financing options to ensure your investment has the best chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ ⭐ Powder furnace with electric heating - ✔️ Internal dimensions: 2500 mm L * 1505 mm W * 1800 mm H ✔️ Electric heating output: 30 kW/h ✔️ Fan: 3000 m3/h 80 mm SS ✔️ Circulation fan output: 1.5 kW/h ✔️ Total 35 kW/h +- 10% ✔️ Digital heat control, continuously adjustable temperature up to 220°C ✔️ Sandwich panels inside: 1.5 mm galvanized steel, outside: 1.5 mm powder-coated Steel ✔️ Adjustable curing temperature, curing time, and exhaust fan function ✔️ An audible signal sounds at the end of the curing time ✔️ Insulated door with special locking systems (snap lock) ✔️ Insulation: 150 mm (150 mm rock wool) 🔥 PEF-2.5 Curing Oven: Your versatile industrial oven for drying and curing processes! 🔥 Whether powder coating, wet paint, plastic processing, or other thermal processes – the powder curing oven is your reliable solution for professional curing and drying processes up to 230°C! 🌡️ _____ 🚚 Maximum loading flexibility • Compatible with ceiling rail systems • Optionally with insert shelf system for small batches _____ ⚙️ Intelligent control – just the way you need it ✅ PID control (optional) for precise temperature control ✅ Touchscreen control panel & smartphone control 📱 (optional) ✅ Weekly & monthly reports at the touch of a button (optional) ✅ Timer function: freely programmable from 10 minutes to 24 hours ⏲️ ✅ Automatic shutdown after the end of the process _____ ♨️ Ramp heating mode (optional) Precisely control temperature progression and holding times, e.g. E.g.: • Reach target temperature within a defined time • Maintain desired time • Controlled cooling to target temperature • Automatic notifications of process events _____ 🛡️ Safety is our priority 🟢 Safety sensors to prevent overheating 🟢 Automatic shutdown in the event of a fault 🟢 Acoustic warning signals in the event of errors 🟢 Solvent and fume removal via automatic venting _____ ⚡ Customized energy and heating system 🔥 Also available with an extension up to 400°C for high-temperature processes (optional) _____ 🧠 No repeated settings necessary! The furnace saves your process parameters – batch by batch. This saves you time and avoids errors. _____ 📢 And best of all: If you have special requirements – we also build customized furnaces according to your specifications! Contact our team of experts for a personalized consultation! _____ ☀️ 2-YEAR WARRANTY ☀️ Request more information

Condition: new, Year of construction: 2025, -TFON Leveltech® Leveling Machine -The TFON Leveltech® is a robust and precise leveling machine designed to handle a wide range of material thicknesses with efficiency and ease. Engineered for reliability and performance, it ensures flat, smooth surfaces on metal sheets and strips to meet stringent quality standards Key Specifications: -Material Thickness: 1 mm – 30 mm -Maximum Material Width: 1,600 mm -Minimum Material Length: 145 mm -Quick Change System for Straightening Rollers: Standard -Flattening Gap Adjustment: Servo Hydraulic with PLC Control. -Machine Dimensions (L × W × H): 5,465 × 6,735 × 2,300 mm. Ihodpokyrphsfx Ahyjt -Total Weight: 40.000 kg

Condition: new, Year of construction: 2025, -TFON Leveltech® Leveling Machine Series -Model: L-9060. -Material Thickness: 1.0 mm – 30.0 mm. -Maximum Material Width: 600 mm -Minimum Material Length: 145 mm. -Flattening Gap Adjustment: Servo Hydraulic / PLC Controlled Overload Protection: Standard Machine Weight: 26.000 kg. Ihedpfxshwb U To Ahyet Machine Dimensions (L × W × H): 4,400 × 7,185 × 2,260 mm Model: L-9011 Material Thickness: 1.0 mm – 30.0 mm. Maximum Material Width: 1,100 mm. Minimum Material Length: 145 mm Flattening Gap Adjustment: Servo Hydraulic / PLC Controlled Overload Protection: Standard Machine Weight: 31.000 kg Machine Dimensions (L × W × H): 4,600 × 7,185 × 2,260 mm Model: L-9013 Material Thickness: 1.0 mm –30.0 mm Maximum Material Width: 1,300 mm Minimum Material Length: 145 mm Flattening Gap Adjustment: Servo Hydraulic / PLC Controlled Overload Protection: Standard Machine Weight: 35,000 kg Machine Dimensions (L × W × H): 5,000 × 7,185 × 2,260 mm Model: L-9016 Material Thickness: 1.0 mm –30.0 mm Maximum Material Width: 1,500 mm Minimum Material Length: 145 mm Flattening Gap Adjustment: Servo Hydraulic / PLC Controlled. Overload Protection: Standard Machine Weight: 40.000 kg Machine Dimensions (L × W × H): 5,200 × 7,185 × 2,260 mm Model: L-9020 Material Thickness: 1.0 mm –30.0 mm Maximum Material Width: 2,000 mm Minimum Material Length: 145 mm Flattening Gap Adjustment: Servo Hydraulic / PLC Controlled. Overload Protection: Standard Machine Dimensions (L × W × H): 5,700 × 7,185 × 2,260 mm.

Condition: new, Year of construction: 2025, *TFON Leveltech® Leveling Machine Series -Models: M-5560, M-5511, M-5513, M-5516. -Engineered for precise leveling of materials with a thickness range from 1.0 mm to 15.0 mm, these models offer flexibility in material width and advanced control features for optimal performance. -Material Thickness: 1.0 mm – 15.0 mm -Maximum Material Width: M-5560: 600 mm. M-5511: 1.100 mm. M-5513: 1,300 mm. M-5516: 1,500 mm. Minimum Material Length: 110 mm Flattening Gap Adjustment: Servo Hydraulic / PLC Controlled Machine Weight: M-5560: 12.000 kg M-5511: 15.000 kg Isdpfx Ajhwb Uwehyjht M-5513: 18,000 kg M-5516: 19.000 kg Machine Dimensions (L × W × H): M-5560: 2,800 × 2,905 × 1,950 mm M-5511: 3,300 × 2,905 × 1,950 mm M-5513: 3,500 × 2,905 × 1,950 mm M-5516: 3,700 × 2,905 × 1,950 mm

Condition: used, Year of construction: 2022, functionality: unexamined, CNC long-bed machining center, model CMA 3RD-CNC, year of manufacture 2022, serial number 4063. The machine is suitable for drilling, thread cutting, milling, and other machining processes on large-format workpieces. Equipped with a robust steel frame construction and industrial PC-based control system from Omron. Features: Spindle: 13.1 kW, BT-40 taper, speed approx. 2,000–6,000 rpm. Rapid traverse speed: X and Y axes up to 30 m/min. Travel distances: X = 6,000 mm, Y = 600 mm, Z = 450 mm. Drilling capacity: Ø22–Ø42 mm. Thread cutting up to M30. Table width: 580 mm with T-slots. Electrical: 400 V, 50/60 Hz, 32 A, 3-phase. Control voltage 24 V. Weight approx. 7.2 tons. Includes tool changer with carousel magazine. Ijdpfxjx N Ncgs Ahyjht

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 06651, travel distance X-axis: 6,800 mm, travel distance Y-axis: 3,700 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 10 m/min, total length: 15,000 mm, total width: 7,500 mm, spindle speed (max.): 4,000 rpm, total height: 7,000 mm, table height: 1,100 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, distance between stands: 3,300 mm, type of input current: three-phase, table load: 50,000 kg, rotational speed (max.): 4,000 rpm, distance table center to spindle nose: 2,110 mm, overall weight: 110,000 kg, spindle motor power: 50,000 W, control cabinet length: 7,000 mm, control cabinet height: 2,000 mm, control cabinet width: 600 mm, Equipment: rotational speed infinitely variable, MODEL: Portal Type AGE: 1992 S/N #: 06651 CATEGORY: Mills, Planer Type, CNC CAPACITY: X-Axis Travel: 6800 mm Y-Axis Head Travel: 3700 mm Z-Axis Ram Stroke: 1500 mm, fixed crossrail Iedpfxjyahv So Ahyoht Ram Cross Section: 500 mm x 500 mm Distance Between Columns: 3300 mm Distance Table To Ram Face: 2110 mm, vertical passage 2000 mm Table Size: 6000 x 2500 mm Spindle (Quill) Diameter: 250 mm Spindle Taper: ISO #50 Spindle Speeds: 0-4000 RPM Spindle Motor: 50 KW EQUIPPED WITH: FIDIA System C20 CNC Control, new in 2002 CNC biaxial continous milling head Universal Milling Head with Auto Indexing Right Angle Head with Auto Indexing Straight Milling Head Wagons for Head Change and Tool Pick-up Change Hydrostatic Bearings Coolant System Full Length Chip Conveyors both side Way Covers Rapid movements: Z-10.000 mm/min, X and Y-15.000 mm/min Table load: max 50.000 kg Weight of the machine: 110.000 kg Outside dimensions: 15.000 x 7.500 x 7050 mm Machine has been tested before dismantling and is fully operational, all mechanical components in excellent condition, electrics new in 2018. Machine available from stock.

Condition: new, Year of construction: 2026, functionality: fully functional, Cost savings for the end user €80,000 vs. €40,000 DMA supplies high-quality CNC machines at bottom prices by eliminating expensive service contracts and on-site installation visits. Ideal for professionals who prefer to remain in control themselves. The purchase price includes: - CNC control “SYNTEC” - CNC Nesting/Milling CadCam - PEGASUS Professional CadCam including online training/helpdesk - Starter kit of cutting and drilling tools for sheet metal machining CNC machining centers. Isdpoxx Uc Usfx Ahyoht • Parts supply: In the event of a defect within 12 months, components will be shipped free of charge after diagnosis (photo/video). • Excluding labor costs: Replacement of the part is done by you or outsourced at your discretion. • Designed with minimal maintenance requirements • Digital preparation: via app or TeamViewer for direct online service. This makes technician visits unnecessary, resulting in significant cost and time savings. • Online service: 24/7 Digital Support as an Alternative • Video manuals: Clips covering calibration or part replacement • Exploded view diagrams: Instantly identify the necessary component Focus on functionality: Your machine, your management, our lowest price. You can call or WhatsApp us for more information and/or to make an appointment. WhatsApp:

Condition: good (used), GUK FA 49/4 Folding Machine + GUK FA 49/4 Cross Folding Module The machine is in very good technical and visual condition. Format: 490x690mm. Folding speed: 30-160m/min Equipment: Ihjdpsx Ncu Nsfx Ahyot 4 parallel cassettes on the main unit 4 perpendicular cassettes on the cross-folding unit First cassette extended. Cassette adjustments are dial-based. Smooth speed control. Counter with batching function and folding speed indicator. Rietschle compressor. Tool roller with a large number of perforating, creasing, and cutting tools. Raised sound insulation covers. Vacuum-assisted feeding Mobile delivery (free standing delivery) with smooth speed control Full documentation. Extensive set of accessories.

Condition: good (used), Year of construction: 2018, Table 1473 x 305mm, Traverses XYZ: 1000 x 410mm x 400mm (knee), quill travel 127mm, Spindle Taper ISO40, Power Drawbar, Spindle Motor 5HP, Spindle Speeds 70 - 3600rpm, Ihedpoxftqdofx Ahyet Prototrak SMX CNC Control,