Used Fertiliser Spreader for sale (557)

Condition: repair required (used), Year of construction: 2025, functionality: limited functionality, machine/vehicle number: 24163 / 24191, Bakery Machines Cedpo Afmqhsfx Ak Ajri For sale as: used and partially damaged/contaminated – no warranty, no guarantees, sold as is, “as is, where is” Depositor + accessories & topping applicator + cleaning cart Manufacturer: bmTEC Machine specifications: see downloadable PDF Condition: used/damaged, in operation from early 2025 to early 2026 Damage to the “Depositor”: Only the “Depositor” is mechanically damaged. During loading, the “Depositor” tipped over to the side and fell to the floor. The frame of the “Depositor” is bent. The gap dimensions vary considerably. Inside, residues from rodents and dirt are visible due to storage. In the area of the product inlet, a compression of the frame can be seen. One of the conveyor belts shows no tension. Inside one of the installed control cabinets, a plastic cover and a screw are lying loose. The “Topping Applicator”, which is controlled via the “Depositor” and the control cabinet installed there, shows no visible defects other than the usual signs of wear. However, soiling is also visible here. No visible irregularities can be seen on the sheets belonging to the machine and on the cleaning cart. Sales basis: loaded onto a truck at the location 83562 Rechtmehring

Condition: good (used), Year of construction: 1983, functionality: fully functional, THOROUGHLY CLEANED AND REPAINTED MACHINE Working width 1,300 mm Roller diameter 149 mm Feed rate 22 m/min Max. pass height approx. 100 mm Crodpfx Aozxr Uhek Aei Mobile version with 2 rollers on the rear machine frame Connection data: 400 V, 50 Hz, 3-phase, N

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: 201269, total width: 1,150 mm, total height: 1,650 mm, total length: 900 mm, working width: 700 mm, input voltage: 230 V, type of input current: three-phase, overall weight: 170 kg, power: 0.75 kW (1.02 HP), passage height: 100 mm, height adjustment type: mechanical, working height: 850 mm, roll width: 700 mm, input frequency: 50 Hz, input current: 16 A, Equipment: CE marking, The used roller coating machine for adhesive is designed for applying adhesives such as glue to various surfaces, including veneer, aluminum veneer, and other materials used in the furniture, parquet, and woodworking industries. The machine is also suitable for materials such as plastic, cardboard, textiles, wood, and more. Codpj Aayrnofx Ak Ajri The adhesive roller coating machine uses an adjustable adhesive reservoir for even and precise adhesive distribution. The speed of the adhesive roller and the transport roller can be adjusted using a frequency controller. The machine can operate at speeds ranging from 5 to 50 m/min. The feed height can also be adjusted using a handwheel. The machine is fully functional and has been inspected in our workshop.

Condition: good (used), Code: 0317 Brand: OSAMA Model: S4R-P - CE Standard Automatic 4 rollers gluing machine with 2 motors for vinyl glue (PVAC), urea glue (UF) and polyurethane glue, for various types of materials like MDF, chipboard, plywood, parquet, composite materials, plasterboards, furniture, panels, doors and various, building sector, sponges, mattresses, papermaking - CE Standard Technical data: Working width mm 1400 Working height mm 0-100 Work surface height mm 890 Spreading roller diameter mm 250 Csdpfxs Ahhffs Ak Aeri Overall dimensions mm 2450 x 1300 x 1600 h Weight kg 830

Condition: ready for operation (used), Year of construction: 1986, Ott Höfer 2-Roller Glue Application Machine ZLA 1300 Working width: 1300 mm Max. workpiece thickness: 80 mm Roller diameter: 165 mm Both rollers are in good condition Feed speed: 18 m/min Codpfx Aoxqrdaok Asri Drive power: 0.75 kW Working height: 800 mm Required space: 2000 x 750 x 1150 mm Weight: 500 kg

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, OSAMA: IDEALTECH HEATED ROLLER MACHINE MODEL HOTMASTER, GLUE MELTER AND ROLLER PRESS The line includes: 1 feeding conveyor with a COSMA cleaning brush 1 IDEALTECH GLUE MELTER 1 OSAMA GLUE APPLYING MACHINE 1 OSAMA central conveyor 1 press (6 pressing rollers, 3+3) 1 COSMA discharge conveyor Metering and application rollers with resistors/oil heating system of 8 kW x 2 - No. 03 motors at the end of the application and metering rollers, independently controlled Crjdjz Ng Agjpfx Ak Asi - Adjustable speed via no. 03 electric frequency regulators with an automatic "reverse" rotation system for the rollers to clean the machine at the end of the work cycle - Heating system with thermal oil and electric resistors - Automatic/motorized lifting of the upper rollers with digital position display - Top applicator 3 kW + bottom applicator 3 kW + top metering device 0.75 kW - Part movement control 0.55 kW - Lifting torque of the top rollers 0.18 kW - No. 02 motorized steel rollers at the machine inlet - No. 02 motorized steel rollers at the machine outlet - Stainless steel tray for machine cleaning - The machine is programmable to heat the rollers automatically without any control or operator intervention - Machine ready for the application of glue guns for the application of PUR glue, without glue guns - Machine ready for integration into a production line * No. 01 tube for PUR glue fume extraction, 145 mm diameter. HIGH-TECH AUTOMATIC 6-ROLLER PRESS MODEL CLR/6-1300 STANDARD CE, VOLTAGE 400/50 3PH Complete machine consisting of: - Inverter speed variator motor - Independent pressure adjustment system for each pair of rollers, with a shared pressure sensor display between the main pressing rollers and the secondary drive rollers - Reinforced structure for high working pressure No. 02 + 02 (four) rubber pressing rollers, Shore hardness 90 +- 5 Shore No. 02 (two) rollers positioned in the middle, made of chrome steel Roller diameter: 300 mm Useful working width: 1300 mm Minimum/maximum working height: 0-100 mm Video available upon request.

Condition: used, total length: 1,000 mm, total width: 400 mm, total height: 1,100 mm, Year of manufacture: 2020 Colour: White Empty weight: 100 kg - Year: 2020 - CE marking present: Yes - Serial number: 200120 - Max. working width [mm]: 450 - Max. work thickness [mm]: 30 - Voltage [V]: 240 - Fuse [A]: 16 - Power [kW]: 0.3 - Transport dimensions: 1000mm x 400mm x 1100mm (l x w x h) - Transport weight [kg]: 100kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Credpfs Aayddox Ak Aji Yorick Diebels

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Working width: 30 cm Adjustable glue application rate Single-sided glue application Crodpfxjzxpvvo Ak Aoi Emergency stop button (mushroom switch) Feed table with rollers Total table length: 130 cm Weight: 150 kg 380 V Year: 2003

Condition: like new (used), functionality: fully functional, Working width: 300mm Manual adjustment of roller spacing Codpfxoz E U E Ho Ak Aori Two glue application speed settings Safety switch Mobile design

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Working width: 1300 mm Cedpfx Ao Ahit Iok Ajri Maximum working height: 100 mm Manual roller spacing adjustment Manual adhesive application adjustment Cleaning brush Safety switch Year of manufacture: 2008 Weight: 300 kg 400V CE marking External dimensions: 210x75 cm, height 155 cm

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, type of input current: three-phase, input voltage: 380 V, working width: 1,800 mm, cutting height (max.): 30 mm, compressed air connection: 10 bar, An exceptional opportunity to acquire a fully integrated, high-performance automated multi-ply CNC cutting solution. Commissioned in August 2023 and kept in excellent condition, this complete VetiGraph / Serkon Makina setup is available for immediate purchase. Full UK delivery, professional decommissioning, transport, and complete onsite re-commissioning are all included to get your facility running quickly and smoothly. Get a complete factory upgrade at a fraction of the cost of new equipment. Cjdpfez A D Rysx Ak Aeri Package includes: * Serkon MC30 Multi-Ply CNC Cutter: 30mm compressed cutting height, 180cm width, continuous conveyor, drill and vortex knife cooling. * MN1 Fabric Spreader & ML2 Roll Lift: Automatic tension-free laying with a 9m x 2m air-flotation table. * Complete CAD/CAM Suite: Includes VetiGraph Pattern Design, Automated Marker Nesting, and FastJet Twin-Head Plotter. * iDigit Photo Digitiser: Quickly converts physical patterns to vector files. Full Turnkey Package: Includes UK delivery, complete installation, fully setup commissioning, 7 days of total onsite training, and a 6-month warranty. Avoid long manufacturer lead times and substantial capital outlay. This complete system is ready for immediate inspection in Preston and fast deployment to your facility. Delivery & Installation: * For deliveries outside the UK, the machine is supplied on an Ex Works (EXW) basis. The buyer is responsible for arranging and covering the cost of international transport, import duties, taxes and any local delivery charges. * Installation and commissioning can be provided by our engineers at an additional cost. For overseas installations, additional charges will apply to cover engineer travel, accommodation and associated expenses. * Please contact us for a quotation for installation and commissioning to your location.

Condition: ready for operation (used), functionality: fully functional, External dimensions: 2500 × 1300 mm Codpfxszxz H He Ak Asri Stepless feed speed adjustment Year of manufacture: 2017 Motor power: 0.75 kW

Condition: excellent (used), functionality: fully functional, Working width: 800 mm Maximum component height: 100 mm Manual roller spacing adjustment Simultaneous top/bottom glue application Safety switch Mobile design Manual adjustment of the glue feed rate Codpfsz Agvhex Ak Aori Refurbished rubber rollers External dimensions: 1500x700x1450

Condition: excellent (used), functionality: fully functional, AUTOMATIC GLUE SPREADER with 2 rollers model OMMA FT 1300 second hand machine n.02 rubber rollers CE mark : Yes max. working length mm. 1300 Csdsz R Dwdspfx Ak Asri volt. 380/50

Condition: new, Year of construction: 2021, functionality: fully functional, machine/vehicle number: LU21C0001, input voltage: 400 V, type of input current: AC, input frequency: 50 Hz, input current: 40 A, Brand new , never used Versa PUR Tank Melter for PUR glue application. Codez Sqppopfx Ak Aori This aggregate is stil in its original packing . The aggregate comes from close down of a factory here in Norway. Ready to be send . Please contact me for more information.

Condition: used, overall weight: 33,200 kg, axle configuration: 3 axles, first registration: 08/1978, loading space volume: 37 m³, Year of construction: 1978, LAG slurry spreader, 37 m³, with 6 chambers ! Refurbished, practically new, for approximately €10,000,--, new braking system, 3rd axle new, electrical system new, new air suspension! - Aluminum body Credpfo Ahqdrjx Ak Aoi - 37,200 liter capacity - 6 chambers, each with 6,200 liters - 6 manhole covers - Direct discharge at the rear! - 3 x BPW air-suspended axles - Drum brakes - 385/65 R 22.5 tires - New technical inspection! - Ready for operation! Errors and prior sale excepted!

Condition: used, power: 15 kW (20.39 HP), Year of construction: 2013, operating hours: 215 h, Equipment: all wheel drive, cabin, Buy online. Finance digitally. Get it delivered nationwide. Chat with us now via WhatsApp: Get in touch quickly and easily with our sales consultant. Internal ID number: 3742 Your advantages with us: Digital consultation via telephone or WhatsApp * Financing options, even without a down payment * Trade-in of your vehicle – whether old or new Optional: 12-60 months used car warranty (valid throughout the EU) * New inspection * New TÜV & emissions test * Nationwide delivery Vehicle highlights: Complete winter service tractor – ready for immediate use * Only approx. 215 operating hours * All-wheel drive with hydrostatic transmission * Enclosed cabin * 1st owner Equipment overview: Attachments: Front snow plow Kubota P1250WA, hydraulically pivotable * Rear spreader Scantec WDS 140-K * Front hydraulic connections Comfort: Enclosed cabin * Power steering * Comfort seat Safety: Rotating beacon * Work lights Technology: Kubota BX2350 – 15 kW (20 hp), 3-cylinder diesel * Hydrostatic drive (automatic) * All-wheel drive * Year of manufacture: 2013 * Paint: Orange Ideal for: Municipalities, caretaker services, gardening and landscaping, commercial and residential properties. Credpfxo Aial Eo Ak Aji Would you like to lease or finance? We offer attractive deals – even without a down payment! Feel free to contact us. Contact: Phone: WhatsApp: E-mail: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Opening hours: Mon-Fri: 9:00 a.m. – 6:00 p.m. Sat: 9:00 a.m. – 2:00 p.m. All information on the internet is non-binding and serves only as a general vehicle description. Errors, typos, and prior sale are subject to change. The photos are AI-processed and serve only as an example to illustrate the size and equipment of the vehicle. The definitive condition of the vehicle is determined exclusively by the purchase contract on site or by written assurances.

Condition: used, Year of construction: 2004, Control unit, factory reconditioned used cleaned functionally tested partially overhauled Manufacturer: Ganner Type: 252/N Year of manufacture: 2004 Machine no.: 756 484 CE type-tested Adhesive container capacity: 5 liters Dowel diameter: 8 mm Dowel length: 30 mm With adhesive supply Water flushing Glue gun mobile Space requirement approx. L x W x H mm: 600x600x1200 Weight approx. kg: 100 Crsdpjz I D Aaefx Ak Aoi Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected without guarantee and warranty

Condition: used, New: Yes Csdpfoz S Dlqex Ak Asri Colour: Grey

Condition: used, Year of construction: 2014, functionality: fully functional, Roller Glue Spreader OSAMA SBR 250 Working width: 230 mm Cjdpfxez H H Ivj Ak Asri Working height: 0 – 100 mm Applicator roller diameter: Ø 150 mm Feed speed: 28 m/min Motor power: 0.18 kW CE marking

Condition: refurbished (used), functionality: fully functional, Valentini adhesive applicator Manual roller adjustment Codpfx Ake Af Agxo Asri

Condition: used, Year of construction: 1901, 1500 ltr. Capacity PTO shaft Container attachment Hydraulic pusher / Csdpfor Hnt Ujx Ak Ajri

Condition: used, operating hours: 13,853 h, lifting height: 5,000 mm, fuel type: gas, mast type: triplex, power: 55 kW (74.78 HP), General information Year of manufacture: 2017 Year of construction: 2017 Weights Empty weight: 8.470 kg Functional Lifting capacity: 4.500 kg Number of valves: 3 CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Mast type: triplex = Additional options and accessories = - 3rd valve - Closed cabin - Heater = Remarks = = Additional options and accessories = - 4th valve - Free lift - Pneumatic shaped solids - Roof window = More information = Cedpfsz I A Syex Ak Asri Make of engine: Kubota Number of valves: 3 Fork carriage: Fork spreading Please contact Bas Sindorf , ) for more information

Condition: used, Year of construction: 2011, Double auger spreader Drive via vehicle hydraulics Capacity: 1.8 m³ Brine: 840 l Adjustable spreading width CONTROL PANEL FUNCTION NOT TESTED Crjdpfx Akox Svryj Aji Sale in current condition and only to other businesses! Our business hours: Mon-Thu: 07:00 am - 03:30 pm Fri: 07:00 am - 03:00 pm Offer subject to our general terms and conditions! Sale only to commercial customers! Used vehicles / used equipment sold without warranty of defects as per our terms and conditions! If you have further questions, I am happy to assist you. For viewings and/or test drives, please schedule an appointment in advance! Vehicles/equipment are not always on site.

Condition: used, Year of construction: 2022, _____Pump Tank Trailer KTR 18.5 Tandem, Professional Equipment: Year of Manufacture: 2022 Approx. 32,000 m³ capacity 24 tons permissible total weight Fenders Lower hitch, 4-ton support load K80 Drawbar, hydraulically height-adjustable All suction lines, except for slide valves and quick couplings, are 8" Vogelsang 6000 l rotary lobe pump with injection system, Changeable impellers and reduction gearbox Suction on the left side, 6" with quick coupling and stone trap All slide valves as pneumatic slide valves / stainless steel blade (clog-free) Automatic filling shut-off Preparation for cutter and suction arm Preparation for trailing shoe Hose rack for suction hoses Single-sided wide-angle universal joint with overload protection Tires 750/60 R 30.5 TÜV approval, 40 km/h 2 LED work lights LED lighting system Preparation for lifting device Codpoz Dmaasfx Ak Asri Special equipment: (1124-B) Kumm-Profi-Pad 7" touchscreen operation Application rate display Individual button assignment for the respective hydraulic functions, such as lowering/raising boom, adjusting boom, connecting arm, pre-set program for Bomech trailing shoe One press of a button and the stored function runs in sequence! (1124-C) Application rate regulation Automatic application rate regulation depending on driving speed, controlled via Kumm-Pad (1124-D) Vogelsang rotary lobe pump 6,000 liters with injection system and changeable impellers (1124-E) Tires 750/60 R 30.5, standard (1124-F) Two-chamber system, standard Two-chamber system as standard. Emptying: First at the rear, then at the front. (1124-G) Air suspension with lifting/lowering valve, standard (1124-H) BPW trailing steering axle, hydraulically lockable (1124-I) Fenders, standard Extremely large wheel cut-outs for a very low center of gravity and the greatest possible steering angle (1124-J) Lower hitch K 80, 4.00 tons support load, standard (1124-K) Hydraulic support leg, standard (1124-L) Drawbar, hydraulically height-adjustable and sprung, standard (1124-M) All suction lines, except for slide valves and quick couplings, are 8", standard (1124-N) Suction nozzle at the front left with pn. plate slide valve and 6" quick-release coupling (1124-O) Automatic filling shut-off (1124-P) Preparation for cutter and suction arm (1124-R) Preparation for tire pressure control system Preparation for the installation of a tire pressure control system, standard! BPW axles pre-drilled! (1124-Q) Preparation for trailing shoe and trailing hose booms (1124-S) Preparation for suction boom above Preparation for the installation of a suction boom above the vehicle, standard. Connection for front pump station, standard (1124-T) Walterscheid universal joint Walterscheid universal joint, single-sided wide-angle (1124-U) Blow-out function Possibility of emptying the entire boom system by means of compressed air (1124-V) LED lighting Rear lights completely LED. Turn signals with dynamic indicator (similar to "Audi" turn signals) (1124-W) Preparation for lifting device Possibility of installing a lifting device with 3/4-point mounting (1124-ZA) Forced steering, electric Forced steering, electro-hydraulic, suitable for KTR tandem vehicles (1124-ZB) Axle load relief Axle load relief at the touch of a button (to increase the support load, the front axle is relieved) (1125-J) Cutter for KTR Cutter Vogelsang Rotacut 10,000 Suction arm KTR, single-jointed Suction arm 8", single-jointed with slide valve, ventilation, Pressure limitation, incl. operation from