Used Field Sprayers for sale (2,242)

Condition: good (used), Year of construction: 2008, INSMAN FIELD CVA-IF-3 Steam Boiler water-tube type Maximun continuous production 3000 Kg/h Power 2132 Kw / 1,825,000 kCal/h Maximum operating pressure: 29 bar Test pressure 37.7 bar Heating surface 133.56 m2 Total volume 4,381 m3 Fpjdpfxjwryaze Agdob Max. temperature service 232.8 ºC DUNPHY Brand modulating type burner. Model TG 37 ZM LC PV. Natural gas power 500-2200 Kw Available documentation

Condition: good (used), Field distributor Fjdpfxob A I Trj Agdopb -multiple distribution boxes available -Price: per piece -Dimensions: 250/170/H110 mm -Weight: 2 kg

Condition: used, Technical details: floor-plate length: 510 mm plate width: 270 mm Plate thickness: 65 mm Fjdpfx Ageu N D Dwodepb very good steel plate for sale free, packed in oiled paper and foil Surface ground Ra 0.8 according to drawing T-slots according to DIN 650: a=36; h=65; b=60 c=26mm, chamfered approx. 1.5mm Distance from edge: 100mm; center distance: 100mm (without attached 4x swivel hoist ring) *

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2023, PRONAR Front Disc Mower Trailed PDF 301 C with Conditioner (Tedders) Fjdpox Nqlcofx Agdepb Demo machine Year of manufacture: 2023 SPECIAL NET PRICE Technical specifications: ► Working width: approx. 3,000 mm ► Swath width: approx. 1,400 – 2,000 mm ► Capacity: approx. 5 ha/h ► Number of discs: 7 ► Number of knives: 14 (2 per disc) ► Required tractor power: min. approx. 75 HP ► PTO speed: 1,000 rpm ► Category II linkage ► Dead weight: approx. 1,220 kg Standard equipment: ► Conditioner ► Freely moving tines ► V-shaped steel tines with rubber shock absorbers ► 4 conditioner speed settings ► Drive via shafts and gears ► PTO shaft (1 3/8” Z 6) ► Lifting skirts ► Quick-change system for the knives ► 1 set of spare knives Advantages of push-type mowers: ► Push-type mowers put less strain on the axle and are more affordable ► The push-type mower operates closer to the axle: ideal for slopes and curves in combination with other implements Advantages of trailed mowers: ► The load relief on trailed mowers does not need to be adjusted to the tractor and is more uniform ► With a trailed mower, the frame can be lifted for quick adaptation to changing conditions

Condition: used, Simatic Field PG / Programming Device / Programming Computer / Laptop / Step 5, Step 7, ProTool, Notebook SIEMENS Type PG 720 PII Year of manufacture: approx. 1999 CPU: Intel Pentium II RAM: 192 MB Operating system: Windows 98 SE Hard drive: HDD 6 GB Display: 12" LCD (swivel-mounted) Input: Detachable keyboard, trackball Drives: 3.5" LS-120 floppy drive, CD-ROM Interfaces: - EPROM slot - PC/Card (PCMCIA) - MEM-Card - 1 x Parallel port - 1 x Serial port (RS232) 25-pin - 1 x Serial port (RS232) 9-pin Fjdpfxsx E Ayws Agdspb - 1 x VGA out - 1 x USB - 1 x MPI/DP 9-pin - external power supply with power cord - In carrying case Installed Siemens software: - Step 5 V7.14 - Step 7 V5.1 - Step 7 MicroWin V5.2 - ProTool V5.2 - ProSave V1.1 - Logo!Soft V2.0 Overall dimensions (W x H x D): 400 x 270 x 200 mm (in carrying case) Total weight: 6.5 kg Computer operates, display functional, CMOS backup battery drained, Battery for mobile operation not functional, device boots. Siemens software operational.

Year of construction: 2010, condition: excellent (used), CAST MEASURING SPLETTE Fabr.STOLLE Type:GMP 6000 Bj.ca.2010 Dimensions: length 6000 mm width 2500 mm height 360 mm. Very good condition. Weight.about 16 000 Kg. Fpedpog Uf Nkjfx Agdob

Condition: used, Year of construction: 2023, SALE PRICE !!! Fpjdpfx Agsx Ia S Njdeb Grassland harrow GS 603 with platform and Drillstar 300 E with lighting

Year of construction: 2022, condition: as good as new (ex-display), functionality: fully functional, Description (detailed configuration): o 5-axis stage Fpedpfxsxzqw To Agdob o Modern, expandable user interface with EDX integration and image composition o SE detector o Scintillator BSE detector (retractable) o In-Lens detector o Low vacuum system with BSE detector (retractable) o Fully software-integrated JEOL-EDX system (60mm²) o In-column current measurement o Navigation camera o Live camera o Control console o Desk, PC with Windows OS, 2 x 24" monitors, keyboard

Condition: used, Technical details: floor-plate length: 2003 mm plate width: 1005 mm plate height: 180 mm Fjdpfewnfu Nex Agdjpb transport dimensions LxWxH: 2,02 x 1,05 x0,18 m 3 pcs availabe (price per piece) Cast steel Table surface 2020mm x 995 mm Longitudinal groove: Number 4 Size: a=38, h=60, b=59, c=24 mm Center-to-center distance 250 mm Fixing hole: Number 4 Size D=30mm *

Condition: new, NEW PRODUCT !!!! TELECOMMUNICATION CABLE 2-core 0.09 € net / running meter FIELD CABLE, CABLE, FIELD TELEPHONE CABLE, GERMAN ARMY, Fpsdpfjl Eyapox Agdjb can be used immediately Model: see photo Condition see photos many technologies in stock!! Item is absolutely NEW Dimensions: 800 m on the roll; Weight approx. 14 kg / roll Other photos are for further usage. All items shown in photos also available from us. Net price per roll (800m)!! If you are interested in larger quantities, please contact us current stock approx. 1000 pieces Viewing is expressly offered. other technology in stock see photos or inquire by phone General: We offer the option of viewing on Tuesdays and Thursdays between 9 a.m. and 4 p.m. by appointment. If required, the item can be taken away immediately. All offers from stock 47441 Moers. Packaging and shipping costs are €12 net per roll All dimensions are approximate Errors in the description expressly reserved. (Photos similar)

Condition: used, Radial drilling machine with plate field WEBO type HRH 100 / 3000 Machine. No. 10009555/7 -- 1110185 -- 6046 Year of manufacture 1979 Drilling capacity Ø 100 mm in ST 60 at feed rate 0.5 mm/rev. Nominal throat depth 3000 mm Max. throat depth max. 3100 mm Spindle holder MK 6 Spindle speed 22.4 - 1600 rpm 36 steps Feed rate 0.05 - 2.5 mm/rev 18 steps Spindle - base plate distance 970 - 2335 mm Pinol stroke 325 mm Swivel range of the arm 360 movable on bed, bed length 7500 mm Fjdpfxofbt Hue Agdepb Clamping area panel field 8000 x 2100 mm - Electrical central clamping - Drilling unit can be moved lengthwise on the machine bed by electric motor - Panel field consisting of 2 clamping plates with 7x T-slot, (length 4000 x width 2100 x panel thickness 360 mm) Space requirement L x W x H 8000 x 4550 x 4300 mm Maximum height 4300 mm Transport height (bed with drilling machine) approx. 3150 mm Transport weight (bed with drilling machine) approx. 20 tons Transport dimensions of panel section L x W x H 4000 x 2100 x 900 mm (2 panels stacked on top of each other) Transport weight panel field approx. 14 ton. good condition

Condition: used, Year of construction: 2023, Meadow harrow (unused) with a 6-meter working width, Fpedpfox Ia T Hex Agdeb hydraulically foldable with additional skids for better gliding.

Condition: used, Technical details: floor-plate length: 4750 mm plate width: 1850 mm plate height: 200 mm weight of the machine ca.: 4785 kg steel plate are available for sale. T-slots according to DIN 650 a=42mm; b=74mm; h=65mm distance edge to 1st T-slot = 150mm distance T-slot to T-slot=310mm Fsdpfxsu N Dq Rs Agdjpb *

Condition: used, Year of construction: 1988, Technical details: floor-plate length: 4000 mm plate width: 2000 mm plate height: 460 mm weight of the machine ca.: 6000 kg 2 pieces cast steel plates for sale free. T-slots according to DIN 650 a=40; h=56; b=74; c=28mm; center distance of T-slots = 250 mm Fedpfxou N Drue Agdopb The plates are equipped for lateral fixing. *

Condition: used, Technical details: floor-plate length: 205 mm plate width: 195 mm Plate thickness: 65 mm 14 plates available T-slots according to DIN 650 for T-slot nuts according to DIN 508 a=13.9; b= 24.2; c= 9.8; h=19.9 mm Fpedou N D H Ejpfx Agdsb *

Condition: used, Technical details: floor-plate length: 3160 mm plate width: 2700 mm plate height: 410 mm Plate thickness: 410 mm weight of the machine ca.: 8,0 t Clamping plate for sale Material cast steel/profiled cast iron Finished surface T-slots according to DIN 650: a=41.5; h=72.0; b=70.0; c=28.5 mm Center stand 300 mm 11x through holes Ø 32 x 60 mm 2x fixing holes at the front Ø 41 mm Fedpfeu Ni Diox Agdjpb *

Condition: used, Technical details: floor-plate length: 5600 mm plate width: 1890 mm Fodpfx Agju Rl Ugedjpb plate height: 1. 335 2, 390 3, 370 mm weight of the machine ca.: 9,0 pro Platte t transport dimensions LxWxH: 5,6 x 1,89 x 335 (390) (370) m 3 clamping plates (price per plate) Weights: No. 1 = 8000kg; No. 2 = 9000kg; No.3 = 8500kg Material: Cast iron T-slots according to DIN 650 Slots lengthwise Number 6 Size a=36mm,h=64mm,b=60mm,c=25mm Center distance 315mm Through-hole Number 23 Size D=130 i.D. *

Condition: used, Technical details: Fedpjval Iusfx Agdepb floor-plate length: 3500 mm plate width: 1500 mm plate height: 345 mm weight of the machine ca.: 3,7 / pro Platte t transport dimensions LxWxH: ca. 3,5 x 1,5 x 0,35 / pro Platte m Es stehen 4 Aufspannplatten zum Verkauf. There are 4 clamping plates for sale. Manufacturer: MORA-Meuselwitzer Guss Material cast steel T-slot according to DIN 650: a=13.5; h=24; b=24.5; c=11mm one long side surface finely milled 2x plates are equipped with guide rails *

Condition: used, Technical details: floor-plate length: 385 mm plate width: 205 mm Plate thickness: 65 mm Fpedpfou N D Hrjx Agdeb very good steel plate for sale free, packed in oiled paper and foil Surface ground Ra 0.8 according to drawing T-slots according to DIN 650: a=36; h=65; b=60 c=26mm, chamfered approx. 1.5mm Distance from edge: 100mm; center distance: 100mm (without attached 4x swivel hoist ring) *

Condition: used, Technical details: floor-plate length: 255 mm Plate thickness: 65 mm Fpodpfx Ageu N D Icedsb very good steel plate for sale free, packed in oiled paper and foil Surface ground Ra 0.8 according to drawing T-slots according to DIN 650: a=36; h=65; b=60 c=26mm, chamfered approx. 1.5mm Distance from edge: 100mm; center distance: 100mm (without attached 4x swivel hoist ring) *

Condition: used, Technical details: floor-plate length: 4000 mm plate width: 1300 mm plate height: 190 mm Plate thickness: 95 mm weight of the machine ca.: 4,15 pro Platte t transport dimensions LxWxH: ca. 4,0 x 1,3 x 0,2 / pro Platte m very good steel plate for sale free, packed in oiled paper and foil AP 4000x1300 - ground steel plate Ra 0.8 Surface ground Ra 0.8 according to drawing T-slots according to DIN 650: a=36; h=65; b=60 c=26mm, chamfered approx. 1.5mm Fpjdpfx Asu N D Ipogdeb Distance from edge: 100mm; center distance: 100mm (without attached 4x stop swivel) *

Condition: used, Technical details: floor-plate length: 3500 mm plate width: 2000 mm plate height: 360 mm Plate thickness: 360 mm weight of the machine ca.: 4,9 / pro Platte t transport dimensions LxWxH: ca. 3,5 x 2,0 x 0,4 / pro Platte m There are 2 plates for sale. (price per plate) Fpodoval Eyepfx Agdeb Surface milled Longitudinal groove Quantity 8 Size a=35mm,h=62mm,b=60mm,c=25mm Center distance 250mm Side fastening D=27x58mm Quantity long side 3 short side 2 *

Condition: used, Technical details: floor-plate length: 1500 mm plate width: 1250 mm plate height: 250 mm Plate thickness: 250 mm weight of the machine ca.: 1,1 / pro Platte t transport dimensions LxWxH: ca. 1,5 x 1,3 x 0,3 / pro Platte m There are 4x clamping plates for sale. Material cast steel Fpjdpfxsval Ihe Agdob T-slots according to DIN 650 a=21.5; h=40; b=38.5; c=17mm Center distance 250mm *

Condition: used, Technical details: floor-plate length: 5500 mm plate width: 2150 mm plate height: 340 mm Plate thickness: 340 mm weight of the machine ca.: 9,0 t transport dimensions LxWxH: ca. 5,5 x 2,2 x 0,35 m Material cast steel Milled, finished surface T-slots according to DIN 650: Fpjdpfx Agjval Nfsdeb a=28; h=46; b=48; c=21mm Center distance 150 / 230 mm *

Condition: used, Technical details: floor-plate length: 1100 mm plate width: 700 mm plate height: 85 mm weight of the machine ca.: 430 kg Clamping plate, cast steel with T-slot according to DIN 650 a=25; h=41; b=48;c=24mm; center distance 76mm Fpedeu N Dyrspfx Agdjb *