Used Ventilation Fan for sale (4,914)

Condition: used, Radial fan, fan, blower, control cabinet fan Control cabinet fan, radial module with support spider EBM PAPST Type K3G450-AZ30-61 Year of manufacture: 2015 Motor: M3G150-IF Design: Radial Air flow rate: max. 8040 m³/h Pressure increase: 1492 Pa Fan: Ø 450 mm Credpfx Ae Agw Enoktji Number of blades: 7 Power connection: 3~ 380-480 VAC 50 / 60 Hz Nominal speed: 2750 rpm Power: 5370 Watts at 400 VAC Rated current: 8.3 A at 400 VAC Efficiency: 64.9 % Efficiency grade N: 67.7 External mounting frame: 550 x 550 mm Operating mode: Continuous operation (S1) Bearings: Maintenance-free ball bearings Protection class: IP55 Insulation class: F Compliance with standards: EN 61800-5-1; CE Approvals: CSA C22.2 No. 77 + CAN/CSA-E60730-1; UL 1004-7 + 60730-1; EAC Technical features: - Output 10 VDC, max. 10 mA - Output 20 VDC, max. 50 mA - Output for slave 0-10 V - Input for sensor 0-10 V or 4-20 mA - External 24 V input (parameterization) - External enable input - Fault alarm relay - Integrated PID controller - Motor current limitation - PFC, passive - RS485 MODBUS-RTU - Soft start - EEPROM write cycles max. 100,000 - Control input 0-10 VDC / PWM - Control interface with safety-isolated SELV potential - Over-temperature protection, electronics / motor - Under-voltage / phase failure detection Dimensions W x H x D: 550 x 550 x 480 mm Weight: 54 kg Very good condition - from a test setup

Condition: good (used), Year of construction: 2005, Manufacturer: Trane Type: CLCE 1810 Year: 2005 Crsdpfok Abw Tox Aktsi Overall dimensions: 3330 x 1900 x 2000 mm Suction side dimensions: 900 x 900 mm Fan: Manufacturer: Nicotra Type: VRE RDH 710 K1 Maximal drive power: 37 kW Maximal rev: 1700 1/min Electromotor: Manufacturer: Tee Electric motors Type: QU 200 L4C-40 H Electric power: 30 kW

Condition: used, Absaugarm aus Metallrohr und wird für das Punktschweißen, Laboranwendungen und die Nebelabsaugung Ventilatoren der FUA Serie können als Direktmontagelüfter für Absaugarme Suction Arm is ideal for grinding, polishing and other types of high-dusting Operations Absaugung - Ventilator / Suction - Fan Plymovent MMH-100-15 - FUA-1300 Baujahr / Year 2007 - Serial-No. 7402 Einsatzmöglichkeiten: Punktschweißen / Spot welding Csdpfx Akjz Hwypeteri Schleifen und Polieren / Grinding and polishing Laboranwendungen / Laboratory Applikation Nebelabsaugung / Mist collection Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), Year of construction: 1990, High pressure fan, dust extraction fan, pressure fan, vacuum fan, high pressure fan VRU 15-100-30H2.8 Condition: Used Drive motor: 3.5 kW p1:1.15kg/m3 Speed: 2880 rpm Volume output: 0.315m³/s Pressure point:62 mbar Connection input: Ø 100mm Connection output: Ø 100mm Dimensions: 1000x600x700 mm Mass: 180 kg Location: from stock 54634 Bitburg - immediately available - Cjdpfovlz Arex Akteri

Condition: used, Ventilation duct, ventilation flap, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings, louvre flaps, non-return flaps, lamellar fans Csdpfoharupjx Aktsri -Ventilation flap: Louvre fan louvre flap -Ventilation flaps: mechanically adjustable, without drive -Opening 6 slats: 1170 x 510 mm -Dimensions: 1325/560 / H115 mm -Weight: 21 kg

Condition: used, Radial fan with sheet metal housing, type H15 /400-M Cedpsxcitvsfx Aktori Serial no. 27265 Year of manufacture 1977 Inlet pipe Ø 200 mm Outlet pipe Ø 110 mm Impeller diameter approx. Ø 700 mm Impeller width approx. 90 mm Airflow 0.25 m3/s = 900 m3/h Total pressure difference 4000 N/m2 = Pg: 400 kg/m2 Specific gas weight at 20°C 1.2 kg/m3 Temperature range max. 70°C Motor speed 2850 rpm Motor power 2.2 kW Mains connection 400 V, 50 Hz - Sheet metal housing - sturdy metal base Required space (L x W x H) 740 x 520 x 1540 mm Weight approx. 80 kg in good condition

Year of construction: 2021, condition: like new (used), functionality: fully functional, High pressure axial tube fan 1000mm 7.5 kW Nuaire SC1000LC4KGX-0JM6 several pieces for sale Air volume 32000m³/h at 420 Pa delivery head Several pieces for sale, high pressure duct fans, excellent for various cooling and ventilation applications. manufacturer: NUAIRE Type: SC1000LC4KGX-0JM6 year of manufacture: 2021. Cjdpfx Aewr Ul Sskteri completely NEW! several pcs Technical data: glass fiber reinforced polyamide blades Adjustable blade angle diameter Ø 1000 mm Anodized aluminum motor motor power 7.5 kW / 400/50Hz/ 1460 rpm, 17.76 amp -50/+60ºC (Stop/Start) minimum operating temperature in standard version Anchored housing Plastic blades Dimensions external size 1106 mm / depth 570 mm including motor weight: 136kg If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, volume flow: 10,550 m³/h, overall weight: 360 kg, inlet: 350 mm, extraction nozzle diameter: 350 mm, 2 pieces blue Nestro FAN Elmot motor 11KW, Cjdpfx Ake Aa It Hstjri Inlet: 350mm, 10.550m3/h. 1 pieces gray Remb Fan Siemens motor 11Kw, Inlet: 300mm, circa.: 10.000m3/h All the fans can be tested; they are in excellent technical condition. The price is per item!

Condition: used, Huber & Ranner Air Handling Unit (AHU) For sale is a high-quality, multi-stage industrial ventilation and air conditioning system from the premium manufacturer Huber & Ranner. The unit was used as a recirculating air unit for a paint booth and is in excellent, clean, and professionally maintained overall condition. The system controls the complete air climate (filtering, cooling, humidifying, and conveying) and is ideal for production halls, paint shops, wood or metal processing, and large industrial projects. Technical data of the complete system: Manufacturer: Huber & Ranner GmbH (Made in Germany) Type / Size: X-CASE 15 (System reference: SPK ULA) Order number: 19 0090 Z / P.010 Volume flow / Air flow rate: 31,000 m³/h The modular components in detail: Powerful fan module: Motor power: 30 kW Csdpezrmctsfx Aktori Static pressure: 1,855 Pa Voltage: 3x400 V / Rated current: 55 A Max. frequency: 49.7 (54.4) Hz Integrated cooling coil: Cooling capacity: 50 kW Material: CU / AL (Copper / Aluminum) Refrigerant: R134a High-efficiency filter stage: Filter class: F9 / Standard (Fine dust filter for the highest air purity) Filter type: TM 9U635A10-1 (Quantity: 9 pieces) Recommended final pressure: 250 Pa Humidifier & droplet separator module: For precise regulation of air humidity, including an integrated droplet separator to prevent moisture transfer into the air duct. "Everything from one source: We would be happy to offer you suitable bank financing for your project." You can find more new and used items in our shop! International shipping costs on request!

Condition: good (used), Radial fan, radial ventilator, radial blower, chip extraction fan, fan, extraction, chip blower, high-performance fan Credpev Ni Uwjfx Aktsi -Manufacturer: Schuko, radial fan chip extraction fan type K 350 -Volume flow: 9690 m³/h -Total pressure: 3038 Pa -Motor: AEG 18.5 kW 1460 rpm -Connection input: Ø 350 mm -Connection output: Ø 360 mm -Base plate: 1000 x 340 mm -Fan wheel: Ø810 x 200 mm -Dimensions total: 1220/785/H1500 mm -Weight: 396 kg

Condition: excellent (used), Year of construction: 2019, Fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, axial fan, axial fan, axial fan -Housing: galvanized steel -Condition: Fans are unused (stock items) -Manufacturer: Fläkt Woods, axial fan axial fan -Type: 90JM/25/4/9/24 3S M3AA132MA INT BMLESS -Power: 7.5 kW 1462 rpm -Fan wheel: Ø 900 mm Cjdpfsxd T D Ijx Aktjri -Number: 2x fan available -Price: per piece -Dimensions: 1140/1140/H610 mm -Weight: 140 kg/piece

Condition: good (used), Fan, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, ventilation blower, exhaust gas extraction, extraction blower -Manufacturer: Dietz, radial fan, radial ventilator, exhaust fan -Type: DG 71 b 1286 -Volume output: 13 m³/min Crsdpfx Akj Ad Ab Tstei -Motor: Dietz 0.48 kW -Speed: 2340 rpm -Protection class: IP 44 -Inlet connection: Ø 120 mm -Outlet connection: Ø 95 mm -Fan wheel: Ø 320 x 45 mm -Number: 3x extraction fans available -Price: per piece -Dimensions: 430/410/H295 mm -Weight: 16.8 kg/pc.

Condition: excellent (used), Year of construction: 2018, Fan head, chamber fan, Dorade fan, mushroom fan, ship fan, deck fan, ventilation, mushroom head hood for ventilation, ventilation duct, ventilation flap, ventilation system, extraction system, ventilation ducts and fittings, louvered damper, backflow preventer, lamellar fan, mushroom head hood -Manufacturer: Witt & Sohn, Mushroom head hood type PK wd 500 x-schw. VZ -Hood opening: mechanically lockable, handwheel -Bolt circle Ø 550 x 12 mm -Quantity: 2x hoods available Codpeh Ig R Ujfx Aktori -Price: per piece -Overall dimensions: Ø 905 x 820 mm -Weight: 89 kg/unit

Condition: good (used), Fan, ventilator, blower, emergency ventilation fan, flue gas fan, axial fan, axial fan, axial fan, suction fan, axial high-performance fan, duct fan, -Fan: axial fan axial fan -Motor: ELD type T90CS 2 1.5 kW / 2860 rpm -Bolt circle: Ø 490 x 10 mm -Number: 2x fan available -Price: per piece -Dimensions: Ø 510 x 310 mm Crodpewy Nczsfx Aktei -Weight: 22 kg

Condition: used, power: 10 kW (13.60 HP), input voltage: 230 V, total length: 1,150 mm, total width: 800 mm, total height: 670 mm, overall weight: 85 kg, fuel type: electric, - Dimensions (L x W x H): 800x1150x670mm - Brand: Bake OFF ITALIANA - Serial number: 01980063 - Model: MISTRAL 5T - Temperature: 270°C - Baking trays: 400x800, 400x600 - Tray spacing: 90 mm - Power: 10 kW - Voltage: 230V - Weight: 85 kg Features of the 5-tray electric convection oven Bake Off Mistral 5T - BakeAIR multi-fan system for uniform heat distribution. Credpszyulxjfx Aktoi - Double-pane, low-emissivity glass for superior insulation. - LED interior lighting for perfect visibility. - High-performance thermal insulation for maximum energy efficiency. - BakeCLEAN automatic washing system for easy maintenance. - Blue LED lighting to check the cleanliness of the baking chamber. - Five fan speeds and semi-static baking for precise results. - Five baking methods for exceptional versatility. - Automatic opening of the BakeDRY flue for precise control. - Program block with password for increased security. - Baking chamber with rounded corners for simplified cleaning. - CE certification for compliance with European standards. - Automatic dry/steam control in the chamber for perfect dishes. - Automatic control of the baking level and batch loading. - Steam control in percentage with BakeSTEAM. - Multi-timer function for multiple and mixed baking cycles without worry. - Storage, display, and export of baking data (HACCP). - Operating modes with customized, manual, or pre-defined programs. - EAC certification for compliance with Eurasian standards. - Modular design for optimal adaptability. - Automatic preheating for quick baking. - Delayed start programming for flexible time management. - Delayed baking programming for increased convenience. - Pre-loaded cookbook available online for culinary inspiration. - Automatic detection and error reporting for peace of mind. - Safety rinse for worry-free maintenance. - Stackable design to save space. - Ventilation with reversing, speed control, and motor brake for optimal performance. - Inner glass that can be opened for easy cleaning.

Condition: excellent (used), 🔥 Industrial Axial Fan JOUNING JAF-DA-24 2HP 400V 230 CMM 🔥 For sale: high-quality industrial axial fan from the renowned manufacturer JOUNING BLOWER CO., LTD. (Taiwan). ✅ Used only a few times – condition is virtually like new ✅ Ideal for warehouses, production halls, industrial ventilation ✅ Robust metal construction – heavy, professional-grade equipment 📊 Technical specifications: Model: JAF-DA-24 Power: 2 HP (approx. 1.5 kW) Power supply: 400V / 3-phase RPM: 1400 Capacity: 230 m³/min (~13,800 m³/h) Static pressure: 38 mmAq Frequency: 50 Hz Year of manufacture: 2016 🛠️ Condition: Sporadically used Fully operational, no technical issues Excellent visual condition – as shown in photos No damages, ready for immediate use Cjdpfxjz Smimo Aktori 📦 Included: Complete fan set as shown in the pictures 🚚 Shipping / Collection: Pallet shipping available Personal collection possible Assistance with transport organization provided

Condition: good (used), Fan head, chamber fan, Dorade fan, mushroom fan, ship fan, deck fan, ventilation, mushroom head hood for ventilation, ventilation duct, ventilation flap, ventilation system, extraction system, ventilation ducts and fittings, louvered damper, backflow preventer, lamellar fan, mushroom head hood -Manufacturer: WMW, fan head type MTK DN 50 GL 37081-86 HH -Flange: DIN 2576 ND10-NW50/60 -Bolt circle Ø 126 x 18 mm -Quantity: 6x hood available Csdsirax Aspfx Aktsri -Price: per piece -Dimensions: 230/165/H225 mm -Weight: 6.5 kg/pc.

Condition: good (used), Fan, ventilator, blower, emergency ventilation fan, flue gas fan, axial fan, axial fan, axial fan, suction fan, axial high-performance fan, duct fan, -Fan: axial fan axial fan -Motor: Siemens. Type 1 MA 3083 Ex. e -Power: 1.1 kW / 2845 rpm -Fan wheel: Ø 400 mm -Number: 3x fan available Codpfx Aowy Ngmjktjri -Price: per piece -Dimensions: 560/560/345 mm/ 560/560/360 mm -Weight: 27 kg

Condition: good (used), Fan, ventilator, electric motor, blower, emergency ventilation fan, flue gas fan, axial fan, axial ventilator, axial fan, suction fan, diagonal fan, duct fan, diagonal fan -Manufacturer: Maico, axial fan, tube fan, diagonal fan Cedpferxgv Nox Aktori -Type: EDR 71-0080.0665 -Power: 3.74 kW -Conveying volume: approx. 23140 m³/h -Quantity: 3 pieces available -Price per piece -Dimensions: 730/720/H720 mm -Weight: 48 kg/piece

Condition: good (used), Fan head, chamber fan, Dorade fan, mushroom fan, ship fan, deck fan, ventilation, mushroom head hood for ventilation, ventilation duct, ventilation flap, ventilation system, extraction system, ventilation ducts and fittings, louvered damper, backflow preventer, lamellar fan, mushroom head hood -Manufacturer: WMW, fan head type MTK DN 40 GL 37081-86 HH -Bolt circle Ø 110 x 18 mm Cedpfx Akjiraxxjtori -Quantity: 1x hood available -Dimensions: 220/140/H220 mm -Weight: 5.4 kg

Year of construction: 2020, condition: good (used), Fan, ventilator, electric motor, blower, blower, radial fan, emergency ventilation fan, flue gas fan, ventilation fan, exhaust gas extraction Cjdpoxn Nuksfx Akteri -Manufacturer: ebmpapst, radial fan -Type: R3G250-RK55-05 -Voltage: 48 VDC -Speed: 2250 rpm -Power: 105 W -Number: 2x fans available -Price: per piece -Dimensions: 250/105/H265 mm -Weight: 2.1 kg

Condition: new, For sale: professional centrifugal fan/blower from the renowned German manufacturer Elektror Karl W. Müller. The device is in unused, storage condition, featuring a robust industrial design suitable for ventilation and dedusting systems. Crjdpfxjz Slrge Aktsi Fan is used in: • Dedusting installations • Extraction systems • Ventilation systems • Wood and metalworking industries • Air transport systems Technical data • Manufacturer: Elektror • Model: 2D 07 • Power: 4.5 kW • Voltage: 400 V / 50 Hz • Speed: 2930 rpm • Capacity: approx. 94 m³/min (5,640 m³/h) • Pressure: approx. 1.2 kPa

Condition: good (used), Fan head, chamber fan, Dorade fan, mushroom fan, ship fan, deck fan, ventilation, mushroom head hood for ventilation, ventilation duct, ventilation flap, ventilation system, extraction system, ventilation ducts and fittings, louvered damper, backflow preventer, lamellar fan, mushroom head hood Codjirf Enopfx Akteri -Manufacturer: WMW, fan head type MTK DN 80 GL 37081-86 HH -Flange: DIN 2576 ND10-NW80/88 -Bolt circle Ø 160 x 18 mm -Quantity: 5x hood available -Price: per piece -Dimensions: 310/200/H290 mm -Weight: 12.2 kg/pc.

Year of construction: 2015, condition: good (used), Fan, fan, electric motor, blower, axial fan, duct fan -Manufacturer: FläktWoods, axial fan type 31JM / 16/4/5/36 S / S 3 S BT4 -Motor: 380-420 V / 1370 rpm / 100 W. -Ventilation duct: Ø 315 mm -Hole circle: Ø 355 x 10 mm -Protection class: IP55 -Number: 1x fans available -Price per piece -Dimension: Ø 395 x 360 mm Csdpfxjgx Am So Aktori -Weight: 15 kg / pc.

Condition: good (used), Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, extraction blower, radial fan, ventilation fan, radial blower, blower, fan, fume extractor -Manufacturer: Exhausto Exodraft, smoke extractor -Type: RS -Motor: 0.03 kW 1350 rpm -Inlet connection: Ø 280 mm -Dimensions: 360/360/H290 mm -Weight: 11.7 kg Credpfx Akszcvw Nstji