Used Grease for sale (565)

Condition: used, Year of construction: 2025, Mixing rotor M80X - grit size 0 - mm Mixing blocks in the wear zones are reinforced Dodpezv N A Rofx Ak Ascp Adapter Likufix SW48 - not included in the price – available upon request Excavators from 24 t / wheel loaders from 13 t Cutting width 1500 mm / 4 rotors Capacity 1.85 m³ Throughput / hour 64 - 95 m³/hour Working pressure 280 - 300 bar Oil flow rate 150 - 200 l/min - Mixing in lime or binding agents to dry the soil, mixing with compost, sand, other soils, etc., while simultaneously breaking up soil clumps. - Aerating, shredding, tearing, and turning biomass, biowaste, and compost while simultaneously separating branches, roots, etc., that cannot be shredded. - Shredding easily brittle rocks in construction debris such as pumice, bricks, and porous concrete, while simultaneously separating the fragments. - Feeding clumped soil onto a screening system reduces waste and increases throughput. The TSP.154 – the bearings are maintenance-free, and the chain housings contain a lubricating grease that, through the movement of the blade and the running of the chain, ensures lubrication at every point. Therefore, the Terra-Star TSP.154 does not need to be re-greased and is maintenance-free. Dimensions and weight without adapter.

Condition: used, Year of construction: 2025, Screening drums with star discs, separation distance 15 mm Medium screening – grain size 0-20/25 mm Star discs in wear zones with hardfacing using armored wire Adapter OQ70/55 – not included in the price – available upon request Excavators from 24 t / wheel loaders from 13 t Dcedpszv Rfasfx Ak Aep Cutting width 1500 mm / 4 drums Capacity 1.85 m³ Throughput / hour 64 - 95 m³/hour Working pressure 280 - 300 bar Oil requirement 150 - 200 l/min - Separating stones, branches, roots, turf, debris, etc. from still usable waste soil, for example, for topsoil in landscaping. - The mixing of compost, sand, substrate, etc. with the soil during the screening process is easily possible. - Screening out coarse stones from excavated soil - Screening out stones from mixed soil after demolition. - Feeding clumpy soil onto a screening system reduces waste and increases throughput. The TSP.154 – the bearings are maintenance-free, and the chain housings contain grease that ensures lubrication at every point through the movement of the screen and the rotation of the chain. Therefore, the Terra-Star TSP.154 does not need to be re-greased and is maintenance-free. Dimensions and weight without adapter.

Condition: used, Year of construction: 2025, Mixing rotor M80X - grain size 0 - mm Mixing blocks in the wear zones with armored wire welded on without adapter – available upon request Dcodpfx Aozv Rfyek Aep Excavators from 14 t / wheel loaders from 10 t Cutting width 1500 mm / 4 rotors Capacity 1.25 m³ Throughput / hour 44 - 65 m³/hour Working pressure 200 - 260 bar Oil flow rate 150 - 180 l/min - Mixing in lime or binding agents to dry the soil, mixing with compost, sand, other soils, etc. while simultaneously crushing soil clods. - Aerating, crushing, tearing, and turning biomass, biowaste, and compost while simultaneously separating branches, roots, etc., that cannot be crushed. - Crushing easily brittle rocks in construction debris, such as pumice, bricks, and porous concrete blocks, while simultaneously separating the fragments. - Feeding clumped soil onto a screening system reduces waste and increases throughput. The TSC.154 - the bearings are maintenance-free, and the chain housings contain grease that, through the movement of the blade and the running of the chain, ensures lubrication at every point. Therefore, the Terra-Star TSC.154 does not need to be greased and is maintenance-free. Dimensions and weight without adapter.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: three-phase, planing width: 630 mm, tool diameter: 125 mm, number of blades: 4, actuation type: electric, rotational speed (max.): 5,000 rpm, total length of planing tables: 1,260 mm, total width: 1,280 mm, total height: 1,220 mm, overall weight: 1,200 kg, Equipment: CE marking, documentation/manual, • Operation: 1-axis control for planing dimensions, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence. • Buttons for manual quick and fine adjustment of the planing thickness according to the digital display. • Push buttons for starting and stopping the cutterhead. • Integrated operating hour counter. • TERSA all-steel cutterhead with 4 knives. • 2nd rubber feed roller, 85 mm, complete. • Thickness table extension, foldable, 630 x 450 mm. • Thickness table: Electric thickness table adjustment with fine adjustment, feed speed 10 mm/s, mounted on 4 support spindles to ensure stability, table surface finely planed. • Feed: 2 speeds 6 / 12 m/min, electrically selectable even during planing, large rubber feed rollers Ø 85 mm to compensate for varying wood thicknesses, rubber rollers are material-friendly and self-cleaning, easy roller replacement; articulated pressure bar at the infeed. • Extraction: High-pivoting, divided hood with chip extraction connection Ø 160 mm, can be connected on the left or right (on both sides in special cases), minimum extraction air volume: 27 m³/min. at 20 m/s. Dcedpfx Aezvfm Eok Aep • Maintenance: Central lubrication strip for oil lubrication points; lubrication of bearings/cutterhead via grease nipples. • Weight: approx. 1,200 – 1,400 kg • Workpiece length min. 270 mm.

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK MP180 Pressure Parts Washer The CORMAK MP180 pressure parts washer is a professional industrial cleaning machine designed for the effective removal of heavy dirt from mechanical, metal, and industrial components. The combination of high pressure, heated cleaning solution, and a stainless steel construction ensures excellent cleaning performance, durability, and convenience in everyday operation. The closed-loop cleaning solution system allows for economical use of the cleaning agent, while the ability to heat the liquid to a temperature of up to 70°C increases the effectiveness of removing stubborn contaminants such as oils, grease, fats, carbon deposits, and other residues. The MP180 parts washer has been designed for professional workshops, service centers, and industrial facilities where precision, durability, and cleaning efficiency are essential. Key Advantages of the MP180 Parts Washer Closed-loop cleaning system with heated cleaning solution – effective removal of stubborn contaminants thanks to an operating temperature of up to 70°C. High operating pressure of up to 8 bar – enables thorough cleaning of hard-to-reach surfaces and heavily soiled components. Stainless steel construction – provides excellent resistance to corrosion, moisture, and intensive use. Dual-function cleaning gun – allows operation using compressed air alone or a mixture of air and cleaning solution, as well as drying components after washing. Adjustable leveling feet – ensure stable positioning of the machine even on uneven surfaces. Parts Cleaning Concentrate Included The MP180 parts washer comes with 2 liters of concentrate for workshop parts washers. When preparing a 10% solution, the concentrate is sufficient to produce up to 20 liters of ready-to-use cleaning solution. For the best cleaning results, it is recommended to use an aqueous solution at a temperature of between 40 and 70°C. The appropriate concentration should be selected according to the type of surface, the nature of the contamination, and the cleaning method used. Recommended Solution Concentration Immersion cleaning: 5–10% Low-pressure cleaning: 2–10% High-pressure cleaning: 2–5% Concentrate pH value: 12.8 MP180 Construction and Technology The MP180 parts washer is equipped with a spacious working chamber and a cleaning solution heating system. The elevated liquid temperature increases the effectiveness of the cleaning process and helps remove stubborn contaminants more quickly. The robust stainless steel construction provides excellent resistance to moisture, dirt, and demanding working conditions. This makes the machine suitable for regular use in workshops, service centers, and industrial facilities. Standard Equipment Dual-function gun – air / liquid + air Dcodpfx Aeztwa Ssk Asp Cleaning solution heating system 180-liter working chamber Stainless steel construction Adjustable leveling feet 2 liters of concentrate for workshop parts washers Technical Specifications Parts washer capacity 180 l Voltage 230 V Frequency 50 Hz Weight 56 kg Height with legs 1,450 mm Height without legs 920 mm Internal width 740 mm Internal height to open lid 410 mm Internal depth 500 mm Loading height 360 mm Loading width 700 mm

Condition: new, Year of construction: 2026, functionality: fully functional, MP160 Pressure Parts Washer – Precision Cleaning with a Closed-Loop System The MP160 pressure parts washer is a professional machine designed for intensive cleaning of industrial, workshop, and automotive components. The enclosed working cabinet, operating pressure of 5–8 bar, and the ability to heat the detergent to 70°C ensure effective removal of oils, grease, carbon deposits, process residues, and other stubborn contaminants. The closed-loop system allows the cleaning solution to be reused, reducing detergent consumption and helping maintain a cleaner, more organized workplace. The MP160 is ideal for cleaning components with complex shapes, narrow channels, recesses, and other hard-to-reach surfaces. Key Advantages of the MP160 Parts Washer 5–8 bar operating pressure – enables effective removal of stubborn contaminants from components with complex geometries. Detergent heating up to 70°C – improves the effectiveness of the cleaning solution and helps reduce cleaning time. Closed-loop cleaning solution system – reduces detergent consumption and the amount of waste generated during operation. Dual-function cleaning gun – allows the application of cleaning solution with compressed air or blow-off cleaning using compressed air alone. Component drying function – after cleaning, components can be blown dry using compressed air. Operating pressure gauge – allows continuous monitoring of operating pressure. Clear control panel – provides independent control of the power supply and heating system. Steel cabinet construction – designed for regular use in workshops and industrial facilities. Dsdjztwkdjpfx Ak Aocp Adjustable leveling feet – ensure stable positioning and proper leveling of the workstation. Parts Cleaning Concentrate Included The MP160 parts washer comes with 2 liters of concentrate for workshop parts washers. When preparing a 10% solution, the concentrate is sufficient to produce up to 20 liters of ready-to-use cleaning solution. For the best cleaning results, it is recommended to use an aqueous solution at a temperature of between 40 and 70°C. The appropriate concentration should be selected according to the type of surface, the nature of the contamination, and the cleaning method used. Recommended Solution Concentration Immersion cleaning: 5–10% Low-pressure cleaning: 2–10% High-pressure cleaning: 2–5% Concentrate pH value: 12.8 Effective Cleaning of Hard-to-Reach Surfaces The pressure spray system allows the cleaning solution to be directed precisely onto contaminated areas. This makes the MP160 suitable for cleaning gaps, recesses, openings, channels, and components with irregular shapes. After cleaning, the operator can switch the gun to compressed-air-only mode. This makes it easier to remove residual cleaning solution from the component's surface and prepare parts for further servicing, inspection, assembly, or refurbishment. Standard Equipment Dual-function gun for spraying cleaning solution and blow-off cleaning with compressed air Cleaning solution heating system Control panel Operating pressure gauge Adjustable stabilizing feet 2 liters of concentrate for workshop parts washers Technical Specifications Specification Value Cabinet capacity 160 l Maximum detergent temperature 70°C Cleaning solution tank capacity 8–14 l Operating pressure 5–8 bar Overall dimensions 770 × 600 × 1,330 mm Weight 47 kg

Condition: ready for operation (used), Year of construction: 2009, operating hours: 1,909 h, functionality: fully functional, machine/vehicle number: 08241380, fuel: diesel, DynaJet 500 High-Pressure Cleaner We are offering for sale a professional DynaJet 500 high-pressure washer with a diesel engine and water heating system. Technical Specifications: • Type: DynaJet 500 • Model: DY Boiler • Fuel: diesel • Power supply: 12 V • Maximum operating pressure: 500 bar • Maximum system pressure: 600 bar • Maximum flow rate: 28 l/min Dcedpfx Akozuafts Asp • Maximum temperature at high flow rate: 80 °C at 28 l/min • Maximum temperature at low flow rate: 150 °C at 8 l/min • Power: 115 kW • Year of manufacture: 2009 Machine application: This professional high-pressure cleaner is particularly suitable for: • cleaning industrial equipment and machinery, • removing dirt, grease, and deposits, • cleaning construction and agricultural equipment, • cleaning production and operational areas, • demanding industrial and maintenance cleaning. Machine condition: • The machine is complete, • functional and operational, • diesel system with heating, • high-pressure design up to 500 bar, • the machine is equipped with a chassis for easy handling, • sold as a fully functional unit. The machine is suitable for companies seeking high-performance professional equipment for high-pressure cleaning in industry, construction, agriculture, or service operations.

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, working width: 900 mm, area performance: 7,200 m²/h, water tank capacity: 150 l, operation weight: 807 kg, KARCHER B 150 R Bp D90 SCRUBBER NEW 6V 250Ah SIAP GEL BATTERIES (6x) Manufactured in 2015 900mm cleaning head equipped with new medium-hard disc brushes for use on any surface. New polyurethane squeegee rubbers resistant to oil, grease, and petroleum products. New rubber guards around the brush head prevent water from splashing outside the machine's outline. A built-in battery charger simplifies daily operation. A new suction turbine ensures high water suction power from the squeegee. Each machine we offer is individually photographed; you buy exactly what you see. TECHNICAL DATA: Working width (mm): 900 Suction width (mm): 1180 Power supply: battery Clean/dirty water tank (l): 150/150 Brush speed (rpm): 180 Theoretical efficiency (m²/h): 7200 Gradeability (%): 10 Weight (kg): 807 Dimensions (L x W x H) (mm): 1700 x 1070 x 1420 INCLUDED: NEW 6V 250Ah SIAP GEL BATTERIES (6x) NEW 36V 600W suction turbine NEW 430mm PPL0.5 disc brushes (2x) NEW head guards (2x) Suction hose Drain hose Squeegee blade with new guards Built-in battery charger 5 liters of Tenzi Normal solution - FREE Dodpjzrwi Rofx Ak Ascp KEY FEATURES: The 150 liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The squeegee bar ensures precise suction of the solution from the cleaned surface. The large working width (900mm) ensures high surface coverage. The control panel is very clear and intuitive.

Condition: reconditioned (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: M-710iC/50 R-30iB, overall weight: 560 kg, load capacity: 50 kg, arm reach: 2,050 mm, controller manufacturer: Fanuc, controller model: R-30iB, teach pendant manufacturer: Fanuc, Equipment: documentation/manual, IRS Robotics® Refurbished industrial robot. 100% complete and fully functional: robot arm, controller, all cabling and teach pendant. Includes our warranty and a detailed 77-Point Protocol evaluation performed by our in-house robotics engineers. Brand: FANUC Dcodpjx Tr Nwjfx Ak Ajp Type: M-710iC/50 Controller: R-30iB General purpose: wide motion multi-purpose robot known for its agility and large work envelope. Payload: 50 kg Reach: 2050 mm Robot mass: 560 kg Delivery time: In mutual agreement IRS Robotics® refurbished: 77-Point Protocol – fully tested on our test benches, new oil/grease, new batteries, fully cleaned, painted in your desired RAL colour. Includes Accuracy Status Measurements (repeatability, accuracy, backlash) About: Our daily trustful business is delivery of refurbished A-Brand robots: ABB – KUKA – FANUC – YASKAWA. Est. 2002. We ship worldwide.

Condition: new, Year of construction: 2024, Fiber laser cutting machine FLV-3015-OT-3022 3kW / VF1530-3000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 60000mm/min - Maximum acceleration: 0.7G - Maximum load: 1200kg - Nominal power: 3.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 20.0mm, maximum thickness 22.0mm - Stainless steel: Recommended thickness 8.0mm, maximum thickness 10.0mm - Aluminum: Recommended thickness 6.0mm, maximum thickness 8.0mm - Brass: recommended thickness 5.0mm, maximum thickness 6.0mm Structure parts The machine is very stable thanks to its welded construction based on massive legs. The high speed of head movements while maintaining high precision is ensured by Japanese Fuji servo motors. Rotary table for hollow tubes The machine is equipped with a rotary table for positioning the profile in relation to the laser head. - Maximum length of machined tube: 3000mm - Diameter of profile holder: 220mm ABLS - automatically replenishes grease in guides. RayTools cutting head with autofocus Dsdpfx Aot E Sdvjk Aocp Optional extra - Otinus Protect to guarantee your peace of mind This product ensures protection for the source of your laser. With this service you will ensure that the continuity of your business is protected. We will secure your business so that you can complete your orders on schedule. Optional extra - Voltage stabilizer Control panel Operation of the fiber laser cutter is run by the control panel, which consists of a screen, mouse and keyboard. The computer runs Windows 10 and CypCut software. All installed software has lifetime licenses. Wireless controller included. Assistance by a specialist We are committed to staying in continuous contact with our customers; therefore, we meet this challenge by offering a time-package of hours to be used for the Otinus Professional Assistance to each machine purchased. Otinus Academy By purchasing this machine you will gain a year's access to online courses that will allow you to effortlessly train a new employee or refresh your knowledge from training! Free package of drawings Each Otinus laser cutter comes with a comprehensive, ready-to-use CAD drawing package. Technical consulting We have specialists who, before the purchase, will select the right machine and accessories based on technical drawings of the parts you plan to make. Price-included 3-day training along with machine installation - 2 days (up to 8 hours) – machine commissioning and controller usage training - 3rd day (up to 8 hours) – work under the supervision of our technician – the possibility of programming specific parts that are manufactured at your site Consultation with a specialist - Telephone: 7.30 a.m. to 9 p.m. (Mon-Sat) - time package of 8 hours to be used within 12 months. Online: from 7.30 a.m. to 2.30 p.m. (Mon-Fri) - time package of 8 hours to be used within 12 months. Access to Otinus Academy courses - LibreCad - 12-month access In addition, you will receive - CAD drawing package

Condition: used, Year of construction: 2019, operating hours: 3,394 h, empty load weight: 4,000 kg, Operating hours: 3,394, First registration: 16/09/2019 Driving speed: 40 km/h - 4,000 kg gross vehicle weight Cab: Sound-insulated, low-vibration cab with entry on right or left, right-hand drive, air-suspended driver's seat, passenger seat, rotating beacon, reverse warning buzzer, engine RPM gauge, heater with 2-speed fan, heated windshield with 2-speed intermittent wiper system, radio/SD, work lights, seat belts for driver and passenger. Floor panels with metal grating, CAN View System with 7" color display showing all relevant data with integrated self-diagnosis system. Engine: VM engine D754 E6 (60D/14), 2,970 cm³, 4 cylinder, 62 kW @ 2,300 rpm, 270 Nm @ 1,350 rpm, Common Rail. Exhaust system: DPF & DOC with SCR urea system, AdBlue tank 15 l Suspension: Fully suspended with coil springs and shock absorbers front and rear. Tires: front 6.50 R10 / rear 225/75 R10 Brakes: Hydraulic dual-circuit brake plus hydrostatic rear brake, hydraulically operated parking brake. Dedpfx Aotuzqpjk Aecp Sweeper container: Container made of DIN 1.4003 stainless steel, tipping height 1.50 m, tipping angle 45°. High-performance blower with a wear-resistant, self-cleaning impeller. Discharge chute on the container 200 mm. Brush: 850 mm front brush (poly) with hydraulic drive, adjustable up to 120 rpm, 1,440 mm sweeping width per side, brush contact pressure and lateral swing angle independently adjustable via joystick, front and side collision protection. Suction duct: Continuously adjustable lifting and lowering suction duct on rigid wheels. Water tank: Fresh water tank with 152 l and water recovery tank with 250 l. Paint: Cab, side and rear covers, single-color white; chassis, fresh water tanks and container in grey. Toolkit includes grease gun, combination wrench, screwdriver set. Special equipment: - Right-hand drive (standard) - All-wheel steering - Wall-to-wall turning circle 4,600 mm - Air-conditioning with automatic climate control - Deluxe driver’s seat, heated with lumbar support - Upgraded radio with Bluetooth - Hands-free phone kit - Blind spot mirror - Heated left/right rearview mirrors - Rear-view camera system with integrated color monitor - Automatic central lubrication system (Interlube) - Folding LED rotating beacon (instead of standard) - Airport rotating beacon, strobe lights (CAA specifications CAP 168) - Optional mounting for 3rd brush available - Mounting plate & high-level work lights oriented to the right Location: 54595 Prüm

Condition: new, Year of construction: 2025, The XTON Smart Cleaner SC850™ automatic basket washer is constructed from stainless steel AISI 304 and acid-resistant steel AISI 316. It is designed for use in various industrial and automotive applications. This washer is intended for degreasing and cleaning parts contaminated with oil or grease, without damaging the surface of the cleaned element. Cleaning efficiency is enhanced by our proprietary XPOWER Active Cleaner BA, which, combined with the appropriate temperature and pressure, easily removes all types of dirt. The machine operates in a closed-loop system at temperatures up to 80°C. Standard equipment includes a rotating basket with a diameter of 85 cm and a 250-liter tank, which can be optionally thermally insulated to protect the heated fluid from cooling too quickly. The Smart Cleaner SC850™ ensures high cleaning quality, time and energy savings, as well as safe and convenient operation. It is designed for automatically removing dirt from cast iron, aluminum, and steel surfaces. The design and construction of the Smart Cleaner SC850™ adhere to the highest quality standards ISO 9001 and environmental standards ISO 14001. EQUIPMENT: - Rotating basket with a diameter of 85 cm - Heated tank with a capacity of 250 liters - Dual liquid filtration system - Liquid level and temperature sensors - Oil separator - Adjustable feet with a height adjustment range of 100 mm Dcodpfxeu Srrhj Ak Aep - XTON Active Cleaner BA (5L starter pack) TECHNICAL PARAMETERS: - Weight: 180 kg - External dimensions - Open chamber (W x D x H): 135 x 110 x 195 cm - External dimensions - Closed chamber (W x D x H): 135 x 110 x 140 cm - Rotating basket diameter: 85 cm - Rotating basket load capacity: 300 kg - Work time programming range: 0 - 99 min - Washing/liquid temperature: up to 80°C - Heater power: 9 kW - Tank capacity: 250 L - Tank capacity to oil separator level: 200 L - Pump capacity: 250 L/min - Spray pressure: 4.5 - 6 bar - Power supply: 3 x 400 V - Safety features: temperature sensor, emergency safety switch, limit switch - Safety rating: IP 54 - Declaration of conformity: CE

Condition: new, functionality: fully functional, Year of construction: 2026, Product overviews of Waste Industrial Timber Wood Pallet Double Shaft Shredder Shredders can generally be used to shred hard-to-break plastics, rubber, large tires, large nylon materials, large pieces of fishing nets, fibers, paper, wood, electrical devices, cables, PET bottles, cardboard, wood, plastic barrels, etc. Solid objects. The main function of the equipment is to squeeze the bulk materials and large-diameter drum metal materials that are not convenient for transportation through the shear of the shredder, and shred them into sheets that meet the requirements. The main structure of the double-shaft shredder is a feed hopper, a knife roller, a driving device, a bearing, a hydraulic system, and an electric control box system. Dodpovn D I Nsfx Ak Aocp Working principle: All kinds of waste materials enter the shredding chamber through the feeding hopper. The double-knife rollers do relative rotation to shred and cut the materials, and then the materials are discharged from the shredder to achieve the shredding of large pieces of materials. Applicable materials and fields Double shaft shredder is one of ethential equipment for waste recycling in following fields and materials: +Bulky Waste: Sofa,Mattress,Chair, Funiture,Windows,etc +Industrial Waste: Textiles,Leather,Rubbers, Leathers ,General industrial waste,etc +Hazardous Solid waste: Medical waste,Paint sludge,Radioactive waste,Hazardous waste oil drum,Jumbo bag,etc +Paper waste: Carton,Cardboard,Book,Newspaper,Document,Brochure,Packaging paper,etc +Garden waste: Branch, Wood pallet, Trunks, Boards,etc +Domestic waste +Biomass straw: Straw, Bamboo, Corn, Sorghum straw, Bean straw, Fruit shell, Palm shell, etc +Scrap metal: Car Shell, Aluminum casting, Household appliances, Scrap light metal,Automobile hub,etc +Paper mill waste: Paper mill slag, Paper mill rope, Paper mill offcut,etc +Wood pallet, scrap furniture, waste chair, tree roots recycling, etc. Double shaft shredder main body: The main body is welded with excellent steel plate to ensure the stability of the equipment under heavy load for a long time. Bearing: The bearing seat is split and easy to disassemble, and the movable knife, fixed knife, bearing and other parts can be quickly removed, and it is easy to maintain and replace the knife. The sealing structure can avoid the contact of broken materials and grease, and can also protect bearings and gears when handling liquid materials.

Condition: reconditioned (used), operating hours: 2,372 h, functionality: fully functional, working width: 750 mm, area performance: 3,700 m²/h, overall weight: 480 kg, warranty duration: 12 months, water tank capacity: 85 l, HAKO HAKOMATIC B90 TB750 SCRUBBER NEW 6V 175Ah SIAP GEL BATTERIES (4x) 2372 hours of operation 750mm cleaning head (TB750) equipped with two new medium-hard disc brushes for work on any surface. New polyurethane squeegee rubbers resistant to oil, grease, and petroleum products. The built-in battery charger and wheel drive simplify daily operation. A new protective rubber around the brush head prevents water from splashing outside the machine's outline. The device is equipped with a new, durable drain hose and a new suction hose. The suction turbine ensures high water suction power from the squeegee. Each device we offer is individually photographed; you buy exactly what you see. Dcsdpfoytcxzex Ak Ajp TECHNICAL DATA: Power supply voltage (V): 24 Brush working width (mm): 750 Suction nozzle working width (mm): 1100 Theoretical capacity (m²/h): 3700 Working speed (km/h): 5 Tank capacity (l): 85/85 Weight (kg): ~480 Power (kW): 2.6 INCLUDED: NEW GEL BATTERIES 6V 175Ah SIAP (4x) NEW 380mm PPL 0.5 disc brushes (2x) NEW suction hose NEW drain hose NEW head guard rubber Squeegee blade with new oil-resistant rubbers Built-in battery charger 5 liter Tenzi Normal solution - FREE KEY FEATURES: The 85-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise solution extraction from the cleaned surface. The large working width (750mm) ensures high surface coverage. The control panel is easy to read and intuitive to use.

Condition: reconditioned (used), Year of construction: 2016, operating hours: 830 h, functionality: fully functional, working width: 650 mm, area performance: 3,500 m²/h, overall weight: 447 kg, warranty duration: 12 months, water tank capacity: 75 l, HAKO SCRUBMASTER B75 R TB650 SCRUBBER NEW 6V 175Ah SIAP GEL BATTERIES (4x) Manufactured in 2016 with 830 hours of operation 650mm cleaning head (TB650) equipped with new medium-hard disc brushes for use on any surface. New polyurethane squeegee rubbers resistant to oil, grease, and petroleum products. A new rubber guard around the brush head prevents water from splashing outside the machine's outline. The device is equipped with a new, durable drain hose and a new suction hose. A new suction turbine ensures high water suction power from the squeegee. Each device we offer has individually taken photos; you buy exactly what you see. TECHNICAL DATA: Power supply voltage: 24 V Brush working width (mm): 650 Suction nozzle working width (mm): 860 Working speed (km/h): 5.5 Tank capacity (l): 75/75 Number of brushes (pcs): 2 Brush speed (rpm): 180 Efficiency (m²/h): 3500 Gradeability (%): 10 Weight (kg): 447 W INCLUDED IN THE KIT: NEW 6V 175Ah SIAP GEL BATTERIES (4x) NEW 24V 600W suction turbine NEW 330mm PPL 0.5 disc brushes (2x) NEW drain hose NEW suction hose NEW head guard rubber Built-in battery charger Squeegee blade with new oil-resistant rubbers 5L Tenzi Normal fluid - FREE KEY FEATURES: The 75-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface. Dsdjzb I Nbspfx Ak Ascp The ergonomically designed cockpit and centrally located operator's seat provide excellent visibility of the surface being cleaned. The large working width (650 mm) ensures high surface coverage. The control panel is very clear and intuitive to use.

Condition: reconditioned (used), Year of construction: 2019, operating hours: 515 h, functionality: fully functional, working width: 510 mm, area performance: 2,300 m²/h, overall weight: 230 kg, warranty duration: 12 months, water tank capacity: 42 l, HAKO SCRUBMASTER B45 CL H TB510 SCRUBBER NEW 12V 105Ah SIAP GEL BATTERIES (2x) Manufactured in 2019 with 515 hours of operation 510mm cleaning head (TB510) equipped with a new medium-hard disc brush for use on any surface New polyurethane squeegee rubbers resistant to oil, grease, and petroleum products. The built-in battery charger and wheel drive simplify daily operation. A new protective rubber around the brush head prevents water from splashing outside the machine's outline. The device is equipped with a new, durable drain hose and a new suction hose. A new suction turbine ensures high water suction power from the squeegee. Each device we offer is individually photographed; you buy exactly what you see. TECHNICAL DATA: Power supply voltage: 24 V Brush working width (mm): 510 Suction nozzle working width (mm): 860 Dodpfxezcyb Se Ak Aecp Theoretical capacity (m²): 2300 Brush speed (rpm): 210 Tank capacity (l): 42/42 Machine weight, ready to use (kg): ~230 Power (kW): 1.31 INCLUDED: NEW 12V 105Ah SIAP GEL BATTERIES (2x) NEW 24V 400W suction turbine NEW 510mm PPL 0.5 disc brush NEW suction hose NEW drain hose NEW head guard rubber Squeegee blade with new oil-resistant rubbers Built-in battery charger 5 liters of Tenzi Normal fluid - FREE KEY FEATURES: The 42-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface. The large working width (510 mm) ensures high surface coverage. The control panel is very clear and intuitive.

Condition: refurbished (used), Year of construction: 2014, machine/vehicle number: R-00570, load capacity: 70 kg, arm reach: 2,050 mm, controller manufacturer: R-30iB A-Size, teach pendant manufacturer: A05B-2518-C202#EGN, Refurbished FANUC M-710iC/70 manufactured in 2014.09. The robot comes with an R-30iB A-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-710iC/70 Model Number: A05B-1125-B202 Year of Manufacture Robot: 2014.09 Warranty term (months): 12   Payload (kg): 70 Reach (mm): 2050 Repeatability (mm): ± 0.04 Controlled Axes: 6-axis Dcsdpfx Akey Uavnj Ajp Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 560   Controller: R-30iB A-Size Year of Manufacture Cabinet: 2014.09 RCC Length (m): 7   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 12

Condition: used, Year of construction: 2012, operating hours: 11,850 h, pressing force: 88 t, filling opening length: 1,800 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, overall weight: 23,000 kg, oil tank capacity: 2,000 l, power: 90 kW (122.37 HP), For sale used baler + used conveyor brand: HSM VK 88 + Stadler KF1800 Baler is VK 88 R – FU, Frequency drives, 2 x 45 kw. * Unblocking cylinder option * Ball joint fixing main ram cylinder * Stadler conveyor 1600 mm internal Year 2012 11850 hours Rod main cylinder and seals kit new. To be replaced : 2 front chamber floor section : middle and front to the channel Greasing / changing: Few sides diabolos are used and running, some rusty, some in good condition. Baler is running good and bales tying is ok Ram wheels OK Ram side wheels OK Rod main cylinder : almost new Main cylinder seals kit : almost new Ram sides nylon strips : 80 – 90 % good. Finetune the geometry adding spacers ( customer has parts on stock) Knife/ counter knife : good, 70% Needles wheels : ok but change is preferred + the closing plates Main frequency drive 1 of 2 : Dsdpfsyuyg Sox Ak Aocp in total 2 x 45 kW : one is out of order. I don’t know if it will be changed or not. Baler is running on one pump. Side walls chamber : Side walls are worn out where the nylon guiding plate are sliding : few millimeters up to 2 mm average. Conveyor : Chain rollers are used with a bit of play. Greasing is missing but still good condition. Guiding strips are ok Feeding cleats are worn out, almost all. Start/stop with frequency drive. Side walls ok on incline part and in pit. Wire coils platform : Not included.

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: IRB2600ID-15/1.85 IRC5 (RW6), load capacity: 15 kg, arm reach: 1,850 mm, controller manufacturer: ABB, controller model: IRC5, teach pendant manufacturer: ABB, Equipment: documentation/manual, IRS Robotics® Refurbished industrial robot. 100% complete and fully functional: robot arm, controller, all cabling and teach pendant. Includes our warranty and a detailed 77-Point Protocol evaluation performed by our in-house robotics engineers. Brand: ABB Type: IRB2600ID-15/1.85 Controller: IRC5 (RW6) Payload: 15 kg Reach: 1850 mm Featuring a unique combination of high payload capacity, large working range, and Integrated Dressing (ID), which routes all cables and hoses inside the robot’s upper arm and wrist. Dcedpfx Aswr Ei Usk Asp IRS Robotics® refurbished: 77-Point Protocol – fully tested on our test benches, new oil/grease, new batteries, fully cleaned, painted in your desired RAL colour. Includes Accuracy Status Measurements (repeatability, accuracy, backlash) About: Our daily trustful business is delivery of refurbished A-Brand robots: ABB – KUKA – ABB – YASKAWA. Est. 2002. We ship worldwide.

Condition: reconditioned (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: R-2000iA/200R R-J3iB, load capacity: 200 kg, arm reach: 2,928 mm, controller manufacturer: Fanuc, controller model: R-J3iB, teach pendant manufacturer: Fanuc, Equipment: documentation/manual, IRS Robotics®: Refurbished industrial robot. Reliability as standard. 100% complete and fully functional: robot arm, controller, all cabling and teach pendant. Includes our warranty and a detailed 77-point protocol evaluation performed by our in-house robotics engineers. Brand: FANUC Type: R-2000iA / 200R Controller: RJ3iB Dcodpfx Asw I Aulsk Aep Payload: 200 kg Reach: 2928 mm Delivery time: To be agreed IRS Robotics® refurbished: 77-point protocol – fully tested on our test benches, new oil/grease, new batteries, fully cleaned, painted in your desired RAL colour. Includes Accuracy Status Measurements (repeatability, accuracy, backlash). About: Our daily business is the reliable supply of refurbished A-brand robots: ABB – KUKA – ABB – YASKAWA. Established 2002. We ship worldwide.

Condition: new, functionality: fully functional, Year of construction: 2025, overall weight: 480 kg, input voltage: 400 V, input frequency: 50 Hz, broaching length: 1,000 mm, number of broaching positions: 1, broaching speed: 3 m/min, reverse speed: 100 mm/s, workpiece diameter (max.): 800 mm, total height: 1,680 mm, Manufacturer: Wiemers AG Model: SR 30 /1000 Machine No.: WAG 3104 Year of manufacture: 2025 Weight: 480kg General / Technical Data: New vertical broaching machine by Wiemers SR 30 (100% compatible with Rausch RS 3) Tensile force: 30 kN (3,000kg) Broaching speeds: 3m/min & 6m/min Return speed: 6m/min Maximum stroke: 1000mm Maximum tool length: 1200mm Table size / Working area: 430mm x 320mm / 340mm x 220mm Table aperture: Ø 90mm for standard broaching arbors "System Rausch" Workpiece diameter: unlimited (removable coolant swivel system) Broaching capacity / keyway width: up to 20mm in steel (from 16mm broaching tool width only with stepped tool shank) Dimensions (h x w x d): 1370mm x 680mm x 750mm (h = table height from floor without attachments) Motor: 2.5kW/3.0kW, 2-stage for 2 working speeds Power supply: 400 Volt / 50 Hz Equipment: - Gear motor drive with 2 working speeds - Reinforced draw bridge made from tool steel for higher tensile forces - Safety door with door interlock, safety interrogation and safety monitoring Djdpfsw D E Twjx Ak Ajcp - Easily removable chip chute with tool extraction protection and parking facility - Externally adjustable tool length setting system (reproducible across machines) - Protective covers for stroke adjustment and electrical switching units - Oil-tight tray on the control cabinet - Electrical sensing of clamping jaws (tool extraction monitoring prevents unintentional retraction of the draw bridge – extra safety for operator and tool) - Integrated coolant system with electrically switched solenoid valve and drain tap - Coolant swivel system with automatic coolant switching via the swivel system - Extra reinforced chip basket and chip screen with magnetic insert - Stainless steel control panel with permanent labelling - 4 central lubrication points for trapezoidal spindle drive with manual grease gun - Electrical preparation for external control element (16-pin connector) - Provision for automatic clamping jaw opening during profile broaching with roller lever - Machine documentation with “CE” declaration of conformity Optional extras: - Automatic clamping jaw opener for easier tool extraction during profile broaching - Open 3-sided splash guard cabin (w x d x h) 700 x 350 x 600mm - External electrical operating unit for broaching and return stroke, as well as emergency stop functionality Note: The machine is 100% compatible with Rausch broaching machines of the same performance class in the RS 3, RS 4, and RS 6 series available on the market. All fixtures, tools or arbors can be used 100% interchangeably. General information: The double spindle drive ensures a smooth and centered pulling force as well as a constant broaching speed. The machine is primarily designed for the production of keyways up to 20mm. (From 16mm keyway tool width only with stepped tool shanks) The design of the machine allows for fast and easy setup for broaching with flat broaching tools for keyways. Thanks to the universally constructed drawbridge and machine table, broaching with both profile and flat broaching tools is possible. Profile broaching can be performed without the use of additional pull heads, by using simple centering bushings. Suitable broaching tools and arbors for the machine are available on request.

Condition: ready for operation (used), Year of construction: 2015, HANDTMANN VF-620 F,P,A + grinder drive PCK-4 Dedpfx Aow E D Susk Ascp The machine after technical inspection. 3 months warranty for parts. Machine with clipper socket. Machine with loading. Instrumentation: grease, grease gun, rotor key, funnel key, holding device key, scraper, set of funnels and technical documentation. THIS MACHINE IS CURRENTLY UNDERGOING A GENERAL OVERHAUL, WHICH WILL END IN APPROX. 6 WEEKS – IF YOU DECIDE TO PURCHASE, PLEASE MAKE A 15% ADVANCE PAYMENT – BECAUSE THERE IS A VERY LARGE INTEREST IN THIS MACHINE WE INVITE YOU TO VIEW THE MACHINE WOLF-GRINDER GD-93-3 - HOLDING DEVICE HV 414 - EXTRA OPTION

Condition: new, Year of construction: 2025, Z-MaT UA650, 5-Axis Simultaneous Machining Center Siemens ONE, 15" LCD display Dual torque direct drive Travel (X/Y/Z): 800/800/550 mm Rapid traverse (X/Y/Z): 48/48/48 m/min Cutting feed: 1-10,000 mm/min Spindle Spindle speed: 18,000 rpm, built-in Spindle taper: HSK63 (HSK100) Spindle motor: 30 kW, Siemens Air blast through spindle Spindle air curtain Spindle oil cooler Double arm tool changer, 30 tools (40/60/200 optional) Max. tool weight: 8 kg Max. tool length: 300 mm Max. tool diameter: 75/120 mm Table Table diameter: Ø 630 mm Max. workpiece diameter: 650 mm Max. table load: 850 kg T-slot (width x number x spacing): 18H8 x 7 x 80 mm Distance from spindle center to table surface: 120–670 mm A-axis swivel range (tilt): ±120° C-axis rotation: 360° Max. rapid traverse A/C axes: 60/100 rpm A/C-axis encoders Standard Equipment End-of-operation light, 3-color status light Electronic handwheel (MPG) Work area lighting Roller linear guides Automatic lubrication system (grease) 3-axis glass scales, air pressurized (XYZ) Automatic tool changer Air blow gun Coolant gun Coolant tank Coolant flush system (chip flushing) Full splash guard Transformer: 400V, 50Hz Control cabinet heat exchanger Automatic shutdown Leveling bolts and blocks Toolbox CE compliance Hinged belt chip conveyor Machine Size and Weight Machine dimensions (L x W x H): 2728 x 3760 x 3726 mm Machine weight: approx. 16,500 kg Dcedpfowku Evjx Ak Ajp Errors and prior sale excepted A wide range of automation options available

Condition: new, overall weight: 3,500 kg, Year of construction: 2026, LONG REACH excavator arm 14 m + bucket Dsdpfxeua Uy Uo Ak Ascp PRICING AVAILABLE FOR ANY MACHINE. PRICING POSSIBLE FOR LENGTHS FROM 8M UP TO 22M TECHNICAL SPECIFICATIONS Material: steel S355 Length: 14m Maximum reach: "forward": 13.5 m Maximum digging depth: 9.5 m Weight: ca. 3500 kg Dipperstick capacity: 0.9 m3 All pins are hardened (to increase hardness above 50 HRC) 1 cylinder bucket, 6 pipes, 4 hoses, 8 pins, 5 lubricating pipes, 1 connection kit Fabra: KAISAI brand (colour can be selected) Hose: GATES brand All pins are fitted with grease nipples All "tubes" are phosphate treated

Year of construction: 1991, condition: excellent (used), functionality: fully functional, overall weight: 520 kg, Pump was operated on a test bench and has only run for very few operating hours. Flow rate: 400 m³/h ( 111 liters / second ) Delivery head / delivery pressure: 19 meters / 1.9 bar Pump speed: 1450 1/min NPSH required: 3.83 m Efficiency: 85.7% Dsdpferfdttex Ak Ajcp Shaft power: 24.04 kW Impeller diameter: reduced 264.5 mm (maximum Ø 269 mm) Shaft seal: single mechanical seal Manufacturer: Burgmann Impeller type: closed radial impeller Bearing type: roller bearing Lubrication type: Grease Materials of construction Pump casing: 1.4408 (AISI 316) Wear plate: 1.4408 (AISI 316) Pressure cover: 1.4408 (AISI 316) Shaft: 1.4462 Impeller: 1.4408 (AISI 316) Bearing bracket: Cast iron EN-GJL-250 Shaft sleeve: CrNiMo steel Nominal size of suction nozzle: DN 200 Discharge connection Nominal diameter: DN 150 Nominal pressure suction PN 16 Nominal pressure pressure PN 16 Coupling manufacturer: Flender Coupling type: Eupex NH with intermediate sleeve Base plate: Painted gray cast iron Motor manufacturer: VEM Type: KPER 200 L4 Efficiency class: IE 0 Motor speed: 1435 1/min Frequency: 50 Hz Rated voltage: 380 / 660 V Rated motor power: P2: 30 kW Thermal class: F Motor protection class: IP54 Cosphi: 0.82 Dimensions: Length: 1600 mm Width: 650 mm Height: 820 mm Weight: 520 kg