Used Grease for sale (581)

Condition: used, functionality: fully functional, Year of construction: 2004, operating hours: 15,950 h, load capacity: 45,000 kg, lifting height: 14,700 mm, fuel type: diesel, drive type: Diesel, Full container reachstacker Gedpfx Ahoxp S Aye Eebw Load center: 1900 Condition: Limited operational readiness Technical condition: normal Front tire size: 18.00-33 Rear tire size: 18.00-33 20-40 ft topspreader + piggy-back Hydraulic sliding cabin, central greasing, rear view camera

Condition: refurbished (used), Year of construction: 2011, machine/vehicle number: R-00492, load capacity: 125 kg, arm reach: 3,005 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, Refurbished FANUC R-2000iB/125L manufactured in 2011.11. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: R-2000iB/125L Model Number: A05B-1329-B261 Year of Manufacture Robot: 2011.11 Warranty term (months): 12   Payload (kg): 125 Reach (mm): 3005 Repeatability (mm): ± 0.2 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1190   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2012.11 RCC Length (m): 7   Gsdpsxpyg Hjfx Ah Esbw Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 10    

Condition: used, Year of construction: 2000, operating hours: 11,330 h, Serial number: YF01-xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20645 Specifications: 2000 model Hours: Approximately 11,330 Weight: 23,200 kg 107 kW Chassis (see pictures) Belt width: 60 cm Total width: Approx. 300 cm S70 quick release Hammer hydraulics Central grease Steelwrist Rototilt Sanding bucket Rotor lamp Air conditioning/AC Videos Ready for delivery Godpfxowp Egbo Ah Eebw Description:Kobelco SK235 from 2000.The machine is sold with a rototilt and sanding bucket.Ready for delivery. Hours: 11330 Own weight: 23200 Total Weight: 23200 Width: 300 Kw: 107 Model: SK235SR

Condition: excellent (used), power: 105 kW (142.76 HP), Year of construction: 2009, operating hours: 12,064 h, Equipment: air conditioning, parking heater, Drive: Wheel Godpfxjxuzruo Ah Esbw Empty weight: 18.775 kg CE mark: yes Technical condition: very good Visual appearance: very good EPA Marked: yes Delivery terms: EXW Please contact Nedtrax B.V. for more information Komatsu PW 180- 7 EO Year: 2009 Reading hours: 12064 h Weight: 18775 KG 105.4 KW Airco/Klima camera Hydraulic QUICK COUPLER central greasing 4 Outriggers CE-MARKED In good condition

Condition: excellent (used), Year of construction: 1972, total power requirement 22 kW weight of the machine ca. 8 t Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : DISKUS Double Disc Surface Grinding Machine in C-form with rotary workpiece feeding system and automatic dressing cycle model DDS 600 RAM year 1972 / 2002 modernized Serial no 6967 _____ Grinding wheels Ø, each 600 mm Grinding wheels bore x height, approx. 75 / 150 mm Grinding wheel speeds Upper wheel 95 – 955 rpm (3-30 m/s) Lower wheel 765 rpm (24 m/s) Grinding spindle drive, each 30 kW Gbodpfx Ahexqrbxj Eow Workpiece dimensions: Grinding width (or workpiece diameter) approx. 20 - 120 mm Grinding (workpiece) height max 50 mm Hydraulic infeed impulse 0.0025 – 0.05 mm Total feed way 150 mm External Ø of workpiece carrier disk 810 mm Feeds of rotary workpiece feed system, infinitely variable 25 – 241 mm/s Total electrical load, approx. 50 kW - 380 V - 50 Hz Weight, approx. 8,000 kg Accessories / Special Features: • In 2002 updated IONIC gauge control Model 17A with monitor and direct input of workpiece data including tolerance range, workpiece counting, statistics. The workpieces are continuously measured via two opposite tracer heads, automatically triggering an hydraulic infeed when needed. • Rotary workpiece feed system with Workpiece carrier wheel (Ø 800 mm) and infinitely variable speed adjustment. • Workpiece height check to avoid crashing with griding wheels • Automatic hydraulic dressing device between the two grinding wheels for simultaneous dressing of both wheels. Dressing cycle can be preset (no. of workpieces/time). Hydraulic return of upper grinding slide to original position/workpiece/thickness (saves a lot of time). • ELBARON Oilmist Extractor with stand and adjustable suction cone • Walkable steel podium for easy machine operating and monitoring • Grinding wheel exchanging device, various spare grinding wheels • Central lubrication using grease and oil mist * Separate switch cabinet. * Separate hydraulic unit. • Currently no coolant filtration device available (can may be supplied separately). This machine is ideal for double-sided simultaneous grinding of parallel workpiece surfaces by continuous method, for maximum output and accuracy in mass production (e.g. Bearing rings, Piston rings, washers, hydraulic parts, and other pressed parts.) Condition : very good ! Very well maintained ! Please click here to soon view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading

Year of construction: 2005, condition: used, stable hose reel for tough and extremely challenging applications stable durable and extremely corrosion-resistant for air, water (oil and grease) diameter of hose connection 12.5 mm (1/2 ") hose length max. 20 m possible open version housing made of cast aluminium, lacquered in space-blue  hose drum ball bearing mounted made of cast aluminium, lacquered in space-blue  can be mounted either on wall, floor or ceiling safety lock for hose drum drum bearing encapsulated Gbjdpjh A Sflsfx Ah Esw drum locking mechanism sixfold rotary transmission made of brass oder brass / stainless steel  hose stop included in scope of delivery  hose outlet via 6 rolls, steplessly adjustable spring drive encapsulated max. pressure: 1.5 MPa (15 bar) hose connections: sppit with hose clamp with rubber hose, cord reinforced temperature max. 80° C space requirements depth - 760 x height - 560 x width - 320 mm weight approx.  32 kg original price approx. ? 1,600.00  - 9 units on stock -

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 8,500 h, load capacity: 10,000 kg, lifting height: 16,200 mm, fuel type: diesel, construction height: 3,900 mm, power: 185 kW (251.53 HP), empty load weight: 39,820 kg, drive type: Diesel, construction width: 4,150 mm, Empty container reachstacker Transmission: Dana TE17300 series Condition: Ready for operation and fully functional Technical condition: Very good Godpfexp S Agox Ah Eebw Front tyre size: 14.00-24 Rear tyre size: 14.00-24 Central greasing system, rear view camera, air-cushioned driver's seat

Condition: refurbished (used), Year of construction: 2012, machine/vehicle number: R-00486, load capacity: 350 kg, arm reach: 2,650 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, Refurbished FANUC M-900iA/350 manufactured in 2012.02. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-900iA/350 Model Number: A05B-1327-B501 Year of Manufacture Robot: 2012.02 Warranty term (months): 12   Payload (kg): 350 Reach (mm): 2650 Repeatability (mm): ± 0.3 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 1800   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2012.02 RCC Length (m): 14   Teach Pendant: A05B-2518-C202#EGN Gbodsxpygtopfx Ah Eow Teach Pendant Cable Length (m): 10  

Condition: used, Year of construction: 2019, Serial number: 5xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21113 Specifications: 2019 model Impact hours: 3550 (may increase slightly) Compressor hours: 5538 (may increase slightly) Engine hours: approx. 8300 (may increase slightly) Winch Rod changer Water mist system Gsdpsw Rag Defx Ah Ejbw Carousel Volvo engine Undercarriage (see photos) Remote control CME grinder L5 GPS Recently serviced Hammer will soon need repacking Work lights Thread greasing system Radio Air conditioning Ready for delivery Description: Sandvik DX800i drill rig with L5 GPS for sale.According to the owner, everything is working properly, and the rig was recently serviced.The hammer will soon need repacking.Ready for delivery.

Condition: excellent (used), power: 161 kW (218.90 HP), Year of construction: 2017, operating hours: 11,390 h, Equipment: air conditioning, Empty weight: 31.300 kg CE mark: yes Technical condition: very good Visual appearance: very good Delivery terms: EXW Production country: IT Please contact Nedtrax B.V. for more information Case CX300D Year: 2017 Reading hours: 11390 h Weight:31300 KG 161 kw Made in Italy Mono boom Bucket With Teeth Gedpfx Ahoxuzq Ds Eebw Hydraulic Quick Coupler hammer pipe Central greasing Original paint Cameras Airco/klima CE-MARKED In good condition

Condition: excellent (used), Bohner BG 80 A Griddle Plate Multifunctional use for frying, cooking, and simmering food This multi-grill features a special grill surface that allows you to prepare all kinds of food directly on the griddle plate, such as fish, meat, vegetables, rice and pasta dishes, as well as potato dishes and desserts. Thanks to its larger capacity, it's also ideal for dishes with sauce, such as goulash. Dimensions: W x D x H 800 x 600 x 200 mm Features: 2 heating zones Grill surface dimensions: W x D 740 x 540 mm Power rating: 400 V / 8.0 kW Fuse rating: 16 Amps Weight: 40 kg Housing made entirely of stainless steel, Housing 170 mm high Device feet 30 mm high Height adjustable up to 75 mm Steel plate, specially hardened Hard chrome plated Energy-saving technology Gbodpfexuql Dsx Ah Ejw Infinitely variable thermostatic heating Optimal thermal conductivity Large, full-surface heat storage area 120 mm wide warming zone on the operator side Grease drain/residual waste disposal: 130 x 30 mm, located in the center on the operator side Find more items – new and used – in our shop! International shipping costs on request!

Condition: good (used), functionality: fully functional, Year of construction: 2006, operating hours: 5,033 h, power: 46 kW (62.54 HP), load capacity: 1,000 kg, lifting height: 31,700 mm, lifting power: 1,000 kg/m, platform length: 6,660 mm, platform width: 2,800 mm, overall weight: 31,200 kg, transport length: 7,020 mm, transport width: 2,980 mm, transport height: 3,630 mm, fuel type: diesel, tire size: 15 x 22,5 schuimgevulde terreinbanden (Wide Wall, non-marking), tire condition: 70 %, wheelbase: 4,630 mm, color: blue, Equipment: UVV, all wheel drive, === KEY SPECIFICATIONS === Year: 2006 Operating hours: 5,033 h Machine width: 2.98 m Drive system: 4x4 with 4-wheel steering Drivable at full height: Yes Platform extension: Yes (hydraulic) Power: Diesel (Hatz Silent Pack) Working height: 33.7 m Platform capacity: 1,000 kg Power type: Diesel Battery type: N/A Outriggers self-leveling: Yes (automatic greasing and levelling jacks) Platform dimensions (L x W): 6.66 × 2.80 m (retracted) / 9.66 × 2.80 m (extended) Gbedexct Evspfx Ah Esw Tyres: Wide Wall foam-filled, non-marking CE certification: Yes Machine weight: 31,200 kg Indoor / Outdoor use: Both _____ === HIGHLIGHTS === Carefully selected from trusted sources with verifiable history CE certification and full documentation included Ready for immediate transport and operation Comprehensive technical documentation available _____ === CONDITION === Used 2006 unit with original paint and visible wear. Tyres approx. 70% condition. Fully functional and drivable at full height. Available immediately from our Sittard stock. _____ === LOCATION & DELIVERY === Located in Sittard, Netherlands Worldwide delivery possible Price: On request (EXW / excluding VAT) _____ Heavy-duty diesel scissor lift with massive 33.7 m working height. Ideal for large-scale industrial applications such as warehouses, power plants, and façade works. Equipped with 4WD, 4WS, automatic greasing, and hydraulic platform extension. Robust, stable, and built for demanding outdoor operations. _____ === FEATURES & EQUIPMENT === New batteries Automatic greasing system Driveable at full height Hydraulic platform extension Control box with quick-disconnect plug 230V power supply on platform 230V generator Audible drive alarm Emergency descent system Rotating warning beacons Proportional drive and lift controls Differential lock Four-wheel steering (4WS) Automatic self-levelling jacks _____ === DELIVERY === Crane loading available upon request Flexible transport options tailored to your destination All shipping handled professionally by the Colle Rental & Sales logistics team.

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 13,730 h, load capacity: 10,000 kg, lifting height: 18,800 mm, fuel type: diesel, mast type: duplex, power: 185 kW (251.53 HP), empty load weight: 43,720 kg, total length: 6,900 mm, drive type: Diesel, construction width: 4,600 mm, Empty container stacker Load center: 1220 Mast type: Duplex Transmission: Dana TE17000 Condition: Ready for use and fully functional Technical condition: very good Front tires type: Air Front tires Size: 14.00-24 Front tires Condition: 80 - 100% Rear tires Type: Air Rear tires Size: 14.00-24 Rear tires Condition: 40 - 60% Gbodpfxjxp S Aae Ah Esw 20-40 sidelift-spreader C-type for double box handling electrical pre-heating for engine, hydraulic oil and cabin (380V) rear view camera with 7' display central greasing system raised air-intake with cyclone pre-cleaner for engine hydraulic accumulators for lifting suspension autom. shutdown of engine after 10min running idle autom. spreader adjustment 20'-40' with 30' stop active tire pressure control system, diesel parking heater SmartFleet RMI system 10 extra working lights on cab roof, front fenders and mast Globetrotter cabin with more interior height cabin is hydr. tilting backwards for 10° (manual/automatic) electronic air-condition air suspended driver seat with heating and seat belt 2nd training seat with seat belt joystick control

Condition: reconditioned (used), functionality: fully functional, working width: 750 mm, area performance: 3,700 m²/h, overall weight: 480 kg, warranty duration: 12 months, water tank capacity: 85 l, HAKO HAKOMATIC B90 TB750 SCRUBBER NEW 6V 175Ah SIAP GEL BATTERIES (4x) The 750mm cleaning head (TB750) is equipped with two new medium-hard disc brushes for use on any surface. New polyurethane squeegee rubbers are resistant to oil, grease, and petroleum products. The built-in battery charger and wheel drive simplify daily operation. A new protective rubber around the brush head prevents water from splashing outside the machine's outline. The device is equipped with a new, durable drain hose and a new suction hose. A new suction turbine ensures high water suction power from the squeegee. Each device we offer is individually photographed; you buy exactly what you see. TECHNICAL DATA: Power supply voltage (V): 24 Brush working width (mm): 750 Suction nozzle working width (mm): 1100 Theoretical capacity (m²): 3700 Gbodpfx Ahsxwk Nbe Eow Working speed (km/h): 5 Tank capacity (l): 85/85 Weight (kg): ~480 Power (kW): 2.6 INCLUDED: NEW GEL BATTERIES 6V 175Ah SIAP (4x) NEW 24V 500W suction turbine NEW 380mm PPL 0.5 disc brushes (2x) NEW suction hose NEW drain hose NEW head guard rubber Squeegee blade with new oil-resistant rubbers Built-in battery charger 5 liters of Tenzi Normal solution - FREE KEY FEATURES: The 85 liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface. The large working width (750mm) ensures high surface coverage. The control panel is very clear and intuitive.

Condition: used, Year of construction: 2014, operating hours: 11,000 h, Serial number: KMTPC240J55K6xxxx Please contact ATS Norway for more information Please provide reference number upon request: 17924 Specifications: 2014 model Hours: Approximately 11,000 Weight: 25,500 kg Power: 141 kW Gedpfxevg Nr Do Ah Esbw Chassis (see pictures) Gjerstad S70 attachment Engcon tiltrotator SMP sanding bucket Central grease Belt width: Approx. 60 cm Width of the machine: Approx. 320 cm Cracks in the windshield (see photos) Rear view camera Extra light Rotor lamp Radio/CD Air conditioning/AC Previously under service agreement Description:Komatsu PC240, 2014 model, sold with Engcon rototilt and SMP sanding bucket.The machine has a service agreement and has been regularly serviced throughout its life. The turbo has recently been replaced. The GPS unit is not included.Last service was performed at 10,500 hours.Delivery can be done quickly. Hours: 11000 Own weight: 25500 Total Weight: 25500 Width: 320 Kw: 141 Model: PC240LC-10

Condition: used, Year of construction: 1983, nominal force 2500 t stroke 600 mm cycle time 13 - 18 s distance between columns 1720 mm Distance table/ram, max. stroke up, adjustment up 2600 mm table surface area 1720 x 1800 mm allowed max. force 4000 t blow die to die 5000 t ram surface 2100 x 1320 mm capacity of ejector in table 40 t ejector stroke in table 250 mm ejector surface area in table 900 x 820 mm capacity of ejector in ram 6 t ejector stroke in ram 40 mm spindle diameter 425 mm power requirement 900,0 kW weight 335,0 t Dimensions (WxDxH) 3,4 x 4,6 x 9,7 m height over floor 8,3 m fully automated forging line / spindle press with automation for the production of flanged shafts for hot forming only with reversible AC motor, pneumatic brake, plate ejector in table (40 t / 250 mm), ejector in ram (6 t / 40 mm), lifting device for repositioning, marking, tool change, insertion device, tilting device, loading and unloading arm, rotary table, circular oil lubrication, centralised grease lubrication cycle time approx. 13 - 18 s as is where is, WITHOUT putting into operation Gbedpfx Ahjwmf Tvo Esw

Condition: refurbished (used), Year of construction: 2016, HANDTMANN VF-608 plus F,P.A. 2016 year The machine has been completely renovated using only original parts. 3 months warranty for parts. All seals, bearings and siemering are new. Servomotors, gears and vacuum pump after complete regeneration. New control panel. Machine with a clip-socket. Accessories: grease, grease gun, impeller wrench, funnel wrench, scraper, set of funnels and technical documentation. The machine is included with the AG-410 linking gearbox. Delivery time: ready to delivery. Gedpopy Edlsfx Ah Ejbw

Condition: excellent (used), axle configuration: > 3 axles, loading space length: 15,500 mm, loading space width: 2,740 mm, loading space height: 1,050 mm, total length: 15,500 mm, total width: 2,740 mm, suspension: hydraulics, tire size: 245/ 70R17.5 | load index 146/146F, color: blue, Year of construction: 2003, Colour: Blue Payload: 73,500 kg Gbodpev E Rchofx Ah Eew Extendable Main Features Manufacturer: Nooteboom Model: MCO-85-06 V/Z – Double Extendable Chassis number: XMRMC000030000456 Year of manufacture: 2003 Weights / Payload Kingpin load: 27,500 kg Axle load: 11,000 kg Total axle load: 66,000 kg Gross vehicle weight (GVW): 93,500 kg Unladen weight: 20,200 kg Payload: 73,500 kg Axles Axle brand: SAF Hydraulic suspension First axle fixed Axles 2 – 6: hydraulic steering High/low valve WABCO EBS braking system Tyres: 245 / 70 R17.5 | load index 146/146F Dimensions Length: 15,505 mm Extensions: +8,800 mm +8,800 mm Maximum extended length: 31,105 mm Platform length: 11,520 mm Maximum platform length: 29,120 mm Platform width: 2,740 mm Height: 1,050 mm Additional Information NATO plug Hydraulically operated gooseneck Outriggers Double extendable Lashing rings Manual landing gear Electro-hydraulic pump for trailer functions Rear underrun protection with lights Kingpin 3.5” Central greasing with 2 pumps = Further Information = General Information Year of manufacture: 2003 Axle configuration Tyre size: 245/70R17.5 | load index 146/146F Axle brand: SAF Suspension: hydraulic suspension Rear axle 1: twin tyres, max. axle load: 11,000 kg Rear axle 2: twin tyres, max. axle load: 11,000 kg, steered Rear axle 3: twin tyres, max. axle load: 11,000 kg, steered Rear axle 4: twin tyres, max. axle load: 11,000 kg, steered Rear axle 5: twin tyres, max. axle load: 11,000 kg, steered Rear axle 6: twin tyres, max. axle load: 11,000 kg, steered Weights Unladen weight: 20,200 kg Payload: 73,299 kg Gross vehicle weight: 93,500 kg Functionality Platform height: 105 cm Extendable chassis: Yes Condition Technical condition: very good Visual condition: very good Financial Information Price: On request Further Information For more information, please contact Stefan Schaapveld.

Condition: reconditioned (used), Year of construction: 2014, operating hours: 738 h, functionality: fully functional, working width: 510 mm, area performance: 2,000 m²/h, overall weight: 230 kg, warranty duration: 12 months, water tank capacity: 42 l, HAKO HAKOMATIC B45 TB510 SCRUBBER NEW 12V 105Ah SIAP GEL BATTERIES (2x) Manufactured in 2014 with 738 hours of operation 510mm cleaning head (TB510) equipped with a new medium-hard disc brush, allowing work on any surface. New polyurethane squeegee rubbers, resistant to contact with oily liquids, grease, and petroleum products. A built-in battery charger simplifies daily operation. A new protective rubber around the brush head prevents water from splashing outside the machine's outline. The device is equipped with a new, durable drain hose and a new suction hose. A new suction turbine ensures high water suction power from the squeegee. Each device we offer is individually photographed; you buy exactly what you see. TECHNICAL DATA: Power supply voltage: 24 V Brush working width (mm): 510 Suction nozzle working width (mm): 860 Theoretical capacity (m²): 2000 Brush speed (rpm): 210 Tank capacity (l): 42/42 Machine weight, ready to use (kg): ~230 Power (kW): 1.31 INCLUDED: NEW GEL BATTERIES 12V 105Ah SIAP (2x) NEW 24V 400W suction turbine NEW 510mm PPL 0.5 disc brush NEW suction hose NEW drain hose NEW head guard rubber Squeegee blade with new oil-resistant rubbers Built-in battery charger 5 liters of Tenzi Normal solution - FREE Gjdsxwkd Espfx Ah Eobw KEY FEATURES: The 42-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface. The large working width (510 mm) ensures high surface coverage. The control panel is very clear and intuitive.

Condition: used, Year of construction: 2020, operating hours: 2,950 h, Serial number: CAT00315CWKX002xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20569 Specifications: Model year: 2020 Hours: Approximately 2,950 Power: 80.9 kW Weight: 15,400 kg Belt width: Approx. 50 cm Machine width: Approx. 250 cm Certified until: October 2025 Equipment and accessories: TRS 14 Rotary tilt S60 quick release Central grease Gbsdpfx Ahswphhhs Eow Excavator bucket and sanding bucket Grader blade Camera behind and on the left side LED bar, additional work light and rotor light Radio/CD Air conditioning / AC State: Minor damage to the cabin (visible in photos) The tilt gripper cassette is defective, one of the cylinders is broken. Description: CAT 315 crawler excavator from 2020 with only approx. 2,950 hours. The machine is certified until October 2025 and comes with both a digging bucket and a sanding bucket. Ready for delivery at short notice Hours: 2950 Own weight: 15400 Total Weight: 15400 Width: 250 Kw: 80,9 Model: 315 Beltegraver m/ tilt og 2 skuffer

Condition: used, Year of construction: 2015, operating hours: 6,049 h, Serial number: 01xxxx Please contact ATS Norway for more information Please provide reference number upon request: 19585 Specifications: - 2015 model Gedpfxovyfcls Ah Esbw - 6049 Hours - 21218 km - 264 HP - Automatic transmission - Weight: 16600 kg - Width: 255 cm - 194 kW - 6x6 - Permitted total weight: 36000 kg - Bar - Tires (see pictures) - Central grease - Bunkering pump - Articulated steering - Commuting on Axles - Heated mirrors - Radio - Light - Air conditioning/ac - Ready for delivery Description: Great Hydrema dump truck with white signs. The dump truck has been well looked after by its owner and it shows. All oils and filters have recently been changed by approved personnel. The dump truck is ready for delivery. HK: 264 Hours: 6049 Own weight: 16600 Total Weight: 36000 Width: 255 Length: 913 Model: 922D Dumper m / hvite skilt

Condition: used, Year of construction: 2021, operating hours: 177 h, Please contact ATS Norway for more information Please provide reference number upon request: 19184 Specifications: - Hours: 177 - 90 km - 8-wheel drive? - Good tires - Automatic box - With front screen - Lots of extra light - Radio/Cd - Climate/ac - Diesel - With belts Worl Power Er-180 000L-8 crane 180 t/m from 2016   Superstructure: - Supportlegs - Extra light - Quick attach - Reversing camera - Central grease Hours: 177 Gjdpfjvg At Iex Ah Eobw

Condition: used, Year of construction: 2018, operating hours: 4,650 h, Serial number: 17850xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21201 Specifications:• 2018 model• Hours: approx. 4650• Weight: 8500 kg• 51.6 kW• Undercarriage (see pictures)• Track width: 45 cm• Total width: 230 cm• Blade• Hammer hydraulics• S50 quick coupler• Central grease• Rototilt• Digging bucket• Grading bucket• Extra lights• Radio/CD• A/C• Recent 500-hour service• Ready for delivery Notes:• Needs a new battery Gsdpjw Srmlofx Ah Ejbw Description:Takeuchi TB280 tracked excavator from 2018.The machine is sold with tilt and 2 buckets. Recently had a 500-hour service.Ready for delivery. Hours: 4650 Own weight: 8500 Width: 230 Kw: 51,6 Model: TB280FR

Condition: used, Year of construction: 2023, Serial number: 19050xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20834 Specifications: 2023 model Hours: Approximately 650 Good chassis Weight: 8400 kg 51.6 kW Belt width: Approx. 45 cm Gedpfxowvzn Is Ah Ejbw Cutter Total width: Approx. 220 cm Central grease Hammer hydraulics S50 quick release R3 Rototilt w/grip EMS Sanding Bucket, 400 Liters SMP Excavator Bucket w/ Cleaning Blade and Teeth, 400 Liter EMS Narrow Bucket, 220 Liters Timber clamp Rear view camera Radio/CD Air conditioning/AC Service history Ready for delivery Equipment that can be included for an additional fee: Spiked hammer Ripper tooth Description:Takeuchi TB290 from 2023 with only 650 hours.The machine is sold with a tilt with grip, 3 buckets and a timber clamp.Ready to put straight to work. Own weight: 8400 Model: TB290-2

Condition: used, Year of construction: 2013, operating hours: 8,237 h, Serial number: T783xxxx Please contact ATS Norway for more information Please provide reference number upon request: 18853 Specifications: - 2013 model. - 25416 km. - 8237 hours. - Central grease. - 783 kw. - 360 degree camera. - Exhaust in box. - Net weight: 68260 kg. - Loading capacity: 41.6 m3. Description: Terex TR 100 for sale. Gbjdovgy Hfspfx Ah Eew Owner has 2 identical ones to be sold, only approx. 1000 working hours difference on them. Incredibly efficient machine for mass transfer. Good with steel left in the box. Works as it should. Ready for delivery. HK: 1064 Hours: 8237 Own weight: 68820 Kw: 783 Model: TR 100