Used Tiefbord 8 25 100 for sale (61,384)

Condition: like new (used), Year of construction: 2025, operating hours: 2,025 h, functionality: fully functional, machine/vehicle number: 25-168-T-402; 25-068-F-100-P, overall weight: 200 kg, Equipment: documentation/manual, A Soco System packaging line is offered, consisting of an F-100-P bottom flap folding machine and a T-402-5-2-9 carton sealing machine. Minimum carton width: 320 mm, maximum carton width: 520 mm, maximum carton length: 900 mm, machine dimensions X/Y: approx. 750 mm/1150 mm. Soco T-402 5-8-7 carton sealing machine, carton length range: 200 mm-750 mm, carton width range: 120 mm-460 mm, carton height range: 95 mm-470 mm, sealing capacity: 18/min, maximum tape roll diameter: 385 mm, weight: approx. 200 kg. Includes safety guard and powered conveyor belt, 500 mm wide. The system is in new condition, was put into operation in January 2026, and has only operated for approximately 75 days in a single-shift operation. Documentation is available. An on-site inspection is possible. Ljdpfx Aozvp Uyohasah

Condition: used, total length: 4,000 mm, total width: 2,200 mm, total height: 2,100 mm, Year of manufacture: 2004 Colour: Grey Weight: 9.800 kg - Year: 2004 - Documentation available: Yes - CE marking present: Yes - Serial number: B8820 - Drive system: CNC - Drive type: Hydraulic - Power [kW]: 15.0 - Max. sheet thickness [mm]: 8 - Max. working width [mm]: 3100 - Backgauge type: Electric Ljdpfoyf Hpzex Ahaeah - Backgauge depth [mm]: 1000 - Sheet support system: Pneumatic - Finger guard: Fixed - Angle adjustment: Motorized - Blade gap adjustment: Motorized - Table type: Ball-bearing table - Transport dimensions: 4000mm x 2200mm x 2100mm (l x w x h) - Transport weight [kg]: 9800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2002, Edge banding machine with joiner milling cutter. Ljdpfx Ahsgmn H Asaeah Otherwise, fully equipped. PU adhesive can be used.

Condition: used, Year of construction: 2016, Pneumatic press Manufacturer: Schmidt Type: 25-100-3K Year of manufacture: 2016 Nominal force: 12.5 kN Laedpfx Ahez Hlzheash Stroke: 100 mm Includes SCHMIDT PressControl 75 in the two-hand safety version Weight approx.: 45 kg 51026ä

Condition: good (used), functionality: fully functional, Year of construction: 1992, operating hours: 8,600 h, overall weight: 5,200 kg, input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, pressing force: 80 t, Amada Promecam Press Brake 80-25 Lodpfx Ahsz Rqxheajah CNC Press Brake, 80 tons, 2500mm bending length. In perfect working order, easy to operate. Robust machine. Only 8600 operating hours. Can be inspected and tested before purchase. German operating manual included.

Condition: used, Technical specifications: Max. grinding wheel diameter: 150 mm Indexing head for sharpening milling cutters Adjustable sharpening angle Manual feed Motor power: 0.3 kW Overall dimensions: Length: 570 mm Width: 320 mm Lajdpfxjzhud Re Ahaeh Height: 600 mm

Condition: excellent (used), For sale: Professional fire-fighting pump METZ TS 8/8 manufactured by METZ Feuerwehrgeräte GmbH Karlsruhe. The equipment is in very good visual and technical condition and comes from a fire brigade unit. The pump is powered by a Volkswagen type 122 engine with 25 kW output, renowned for its durability and ease of maintenance. A significant advantage is its low operating hours—approximately 66 hours, which is exceptionally low for equipment of this type. Technical specifications Lajdpfx Aoz Slqiohajh • Manufacturer: METZ Feuerwehrgeräte GmbH • Model: TS 8/8 • Standard: DIN 14410 • Year of manufacture: 1989 • Engine: Volkswagen type 122 • Engine power: 25 kW • Displacement: 1192 cm³ • Pump capacity: 800 l/min at 8 bar • Operating weight: approx. 190 kg • Hour meter: approx. 66 hours Equipment • Pressure and vacuum gauge • Hour meter • Work lights • Firefighting quick couplings • Transport frame • Choke and throttle control Application • Volunteer and professional fire brigades • Water transfer from ponds, rivers, and wells • Agricultural operations • Fire-protection systems • Dewatering and water management duties Robust German engineering—very durable and easy to service.

Year of construction: 1999, condition: ready for operation (used), A walk-in CNC 5-axis large-format portal milling machine Fooke is available. Travel X/Y/Z: 3000mm/2500mm/1150mm, bridge height: 800mm, table dimensions X/Y: 3000mm/2500mm, spindle power: 28kW, spindle speed: 16000rpm, swivel range A: +/-100°, rotary range C: +/-181.5°, feed rate: 15m/min, rapid traverse X/Y: 20m/min, rapid traverse Z: 10m/min, rotary speed A/C: 8rpm, tool holder: HSK-63A. Machine dimensions X/Y/Z: approx. 6000mm/6000mm/5200mm, weight: approx. 50000kg, control: Siemens 840D powerline. Documentation available. On-site inspection is possible. Ljdpfxeygmc Ds Ahajah

Condition: new, 8 St. range L-W-H 720 x 580 x 1000 mm Laedpfou Imptjx Ahaoh weight 128 kg 100Kg je Lade Stable tool cabinet with 8 drawers, lockable. 2 x 75, 4 x 100, 1 x 150 and 1 x 200mm Internal dimensions: 620x450 mm. Maximum load per drawer 100kg!!! Furnishings: 32x boxes 75 x75 mm. 16x boxes 75 x 150 mm. 8x boxes 150 x 150 mm. 12x dividers long 32x short dividers 1x stacking tray

Condition: new, 8 St. range L-W-H 880 x 580 x 1000 mm weight 156 kg 100Kg je Lade Stable tool cabinet with 8 drawers, lockable. 2 x 75, 4 x 100, 1 x 150 and 1 x 200mm Internal dimensions: 770x450 mm. Maximum load per drawer 100kg!!! Furnishings: 32x boxes 75 x75 mm. 16x boxes 75 x 150 mm. 8x boxes 150 x 150 mm. 12x dividers long 32x short dividers Ljdpeu Imf Iefx Ahasah 1x stacking tray

Condition: new, 8 St. range L-W-H 720 x 580 x 1000 mm weight 128 kg 100Kg je Lade Stable tool cabinet with 8 drawers, lockable. 2 x 75, 4 x 100, 1 x 150 and 1 x 200mm Internal dimensions: 620x450 mm. Maximum load per drawer 100kg!!! Furnishings: 32x boxes 75 x75 mm. Lajdpfx Ahou Impmeaeh 16x boxes 75 x 150 mm. 8x boxes 150 x 150 mm. 12x dividers long 32x short dividers 1x stacking tray

Condition: excellent (used), Year of construction: 2007, Engel Insert 80V/80V/100 2F / 2-K tie-bar-less machine, vertical / Perfect technical condition Year of manufacture: 2007 Laodpfoz Ipn Isx Ahash Injection unit: Screw diameter: 2 x 25 mm Injection weight: approx. 49 g Injection pressure: 1214 bar Metering volume: 54 ccm Clamping unit: Clamping force: 100 t tie bar distance: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control unit: CC 200 Additional equipment: Tie-bar-less machine with two vertical injection units, with turntable. Air valve x 6 Hydraulic core puller x 2 Control system with hot runners x 12 Infrared protection curtains Thermoplastic and rubber injection units are available for this machine Turntable diameter: 1200 mm The machine has been regularly serviced by the authorized service Engel in Germany Dimensions: Weight: 9400 kg Length/width/height: 4.85x1.47x2.30 m Propulsion: Pumps/motor: 30 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: used, Table shear cutting knife, replacement knife for table shear, replacement cutting, cutting knife, shear knife Laodpeharulsfx Ahash -Spare knife: for guillotine shears, from stock for guillotine shears Fischer DHS 12/3000 -Quantity: 4 pieces available -Lengths: 2x 2650/100/25 mm / 2x 450/100/25 mm -Hole spacing: 200/250 mm, see photos -Accessories: incl. Box with fastening screws -Price: complete -Weight: 126 kg

Condition: ready for operation (used), A fully automatic edge polishing machine (bullnose) C.M.G. for grinding marble, granite, natural stone, quartz and ceramic is available. Edges: straight/toroidal/chamfers, chamfer units: 2+2, spindles: 8, calibrating wheel diameter: 200mm, cutting disc diameter: 300mm, tool diameter: 130mm, workpiece thickness range: 20mm-100mm, conveyor speed: 2300mm/min, machine dimensions: approx. 7000mm/1800mm/1900mm, weight: approx. 5100kg. The machine has not been in operation for at least 5 years and must be inspected. An on-site inspection is possible. Lsdpfxjyypmms Ahasah

Condition: used, CNC Press Brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm) Press brake with 6-axis backgauge and CYBELEC control Serial No.: Year of manufacture: 2001 Pressing force: 250 tons Working length: 3100 mm Stroke: 365 mm Throat depth: 410 mm Clearance between side frames: 2750 mm Table width: 100 mm, 200 mm with table extension Table height above floor: 840 mm Backgauge X-axis: 620 mm travel Backgauge R-axis: 240 mm Approach speed: 200 mm/s Working speed: 1-10 mm/s Y rapid traverse: 200 mm/s Y working traverse: 1-10 mm/s Y return: 135 mm/s Oil capacity: approx. 400 liters Motor power: 18.5 kW Lodpfx Ahjya Iaqsaeah Connected load: approx. 25 kW Power supply: 400 Volt, 50 Hz, 50 Amp. - 8 axis CNC control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2 - 2 freely programmable backgauge fingers, laterally movable (Z1+Z2) - Backgauge (X-axis 620 mm) with 3 gauging points up to max. 1080 mm - Ram with servo valves and measuring system Y1 and Y2 - FIESSLER AKAS safety light barrier - Operation via electric foot switch and/or two-hand control panel - Hydraulic upper tool clamping (TRUMPF system) with 20 mm clamping slot - Tool holder for lower tool, height 160 mm x width 60 mm, with holder slot 14 x 23 mm - Tool system TRUMPF, without tools Space requirement (L x W x H): 0 x 2500 x 3400 mm Machine transport height: 3360 mm Weight: 17,000 kg Good condition

Condition: used, machine/vehicle number: 007276, Max. panel width: 800 mm Max. panel length: 2500 mm Laedot H Tx Djpfx Ahash Max. panel stack height from the ground: 1650 mm Lifting capacity: 4500 Kg

Condition: used, total length: 4,100 mm, total width: 1,400 mm, total height: 130 mm, Colour: Grey Empty weight: 3.000 kg Price: On request - Drive system: Conventional - Drive: Mechanical - Number of rolls [pcs.]: 3 - Number of driven rolls [pcs]: 2 - Max. sheet thickness [mm]: 8 - Max. working width [mm]: 2540 - Top roll diameter [mm]: 220 - Bottom roll diameter [mm]: 220 - Transport dimensions: 4100mm x 1400mm x 135mm (l x w x h) Lodpfsz Avg Nex Ahajah - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, GMN for Schaudt Mikrosa TSE 70 c x 25 TSE 70c - 25/8 spindle SN: 378503, unused in opened original packaging, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Laedpfx Aenvyh Nshaoh

Condition: used, machine/vehicle number: 007277, Max. panel width: 800 mm Laedpfx Aet H Tynjhash Max. panel length: 2500 mm Max. panel stack height from the ground: 1650 mm Lifting capacity: 4500 Kg

Condition: used, machine/vehicle number: 007275, Max. panel width: 800 mm Max. panel length: 2500 mm Max. panel stack height from the ground: 1650 mm Laedot H Tvvjpfx Ahaeh Lifting capacity: 4500 Kg

Condition: used, Year of construction: 2018, operating hours: 18,939 h, machine/vehicle number: PST41, Used HRS tubular skid-mounted pasteurizer cold-fill 3000 LPH - Year 2018Technical Specifications & Performance DataThis HRS Process Systems pasteurizer is a stainless-steel packaged process skid designed for controlled thermal treatment within beverage production and industrial packaging operations. Pasteurizers are used to apply a defined heating and cooling process that supports product stability and consistent processing before downstream filling, labeling, capping, or secondary packaging.Manufacturer: HRS Process SystemsModel: 1 x 20 M170 - 63/100 8000Configuration: SKID - 1Year: 2018Operating hours: 18,939Construction: Stainless-steel process skid assemblyAdvanced Automation & Control SystemsThe machine is supplied as a process skid, providing a compact arrangement for thermal processing equipment and associated process connections. A pasteurizer installation is typically integrated with the line control architecture to coordinate product flow, heating, holding and cooling stages with upstream and downstream equipment.Control, electrical supply and instrumentation arrangements should be evaluated during commissioning according to the requirements of the receiving production line.Production Line Integration CapabilitiesThis pasteurizer can be positioned within a used bottling line or beverage production process where controlled heat treatment is required before packaging. Depending on the product and process design, pasteurization equipment is commonly integrated with product preparation, buffer tanks, filling machinery and conveying systems.The skid configuration supports organized installation within industrial packaging environments and can be assessed for connection to existing process piping, utilities and production line automation. It is suitable for applications involving liquid products where pasteurization forms part of the required production process.Machine Condition & Maintenance HistoryManufactured in 2018, this second hand pasteurizer has recorded 18,939 run working hours. The available operating-hour record provides a useful reference for maintenance planning, inspection and integration into a bottling equipment project.A pre-installation technical inspection can focus on the condition of process connections, heat-transfer components, valves, pumps, instrumentation and skid-mounted assemblies, together with confirmation of suitability for the intended product and operating process.Operational Performance & VersatilityPasteurization is an important processing step for many beverage production applications, helping operators manage thermal treatment before products move to filling and industrial packaging stages. The stainless-steel skid arrangement is appropriate for hygienic process environments and supports structured access to the installed equipment.When incorporated into a production line, a pasteurizer can contribute to stable process conditions and repeatable thermal handling. Final operating parameters depend on the product recipe, target process, line configuration and validation requirements.Installation Requirements & Site PreparationInst... Ljdpfxs Adtrvo Ahaeah

Condition: used, Year of construction: 2018, operating hours: 234 h, functionality: fully functional, fuel type: electric, drive type: Elektro, Scrubber-dryer Condition: Ready for use and fully functional Lajdpfxswkk T As Ahaoh Technical condition: Good Description: Battery. Year of manufacture: 2023

Condition: used, machine/vehicle number: 007278, Max. panel width: 800 mm Max. panel length: 2500 mm Max. panel stack height from the ground: 1650 mm Laodst H Txqjpfx Ahajh Lifting capacity: 4500 Kg

Condition: used, Max. bending length: 2540 mm Max. sheet thickness: 8 mm steel Top roller diameter: 200 mm Right and left rotation via foot switch Safety rope pull switch Conical rounding possible Lodpfsxwyfrsx Ahasah Motorized rear roller delivery Lower roller adjustment via handwheel with position indicator Weight: approx. 4,500 kg

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 2,463 h, load capacity: 2,500 kg, lifting height: 6,000 mm, free lift: 2,150 mm, fuel type: electric, mast type: triplex, construction height: 2,820 mm, fork carriage width: 1,200 mm, fork length: 1,200 mm, empty load weight: 5,305 kg, total length: 2,450 mm, drive type: Elektro, construction width: 1,280 mm, Electric 4-wheel forklift Load center: 500 ISO class: FEM 2 A Mast type: Triplex Transmission: AC Technical condition: good Front tire type: Superelastic Front tire size: 2 x 23x9-10 Front tire condition: 20 - 40% Rear tire type: Superelastic Lasdpo Adxitofx Ahaeh Rear tire size: 2 x 18x7-8 Rear tire condition: Not available Battery voltage: 80V Battery capacity: 620Ah Battery year of manufacture: 2018 Double auxiliary hydraulics, integrated fork positioner with side shift, opening range 360-1080mm, load guard, Blue Spot, full free lift, battery, 2x front work lights, 1x rear work light.