Used Tos Fnk 25 for sale (15,340)

Year of construction: 1986, condition: excellent (used), machine/vehicle number: 12024, table mounting size: 290 x 1250 mm table movement x: 800 mm table movement y: 360 mm table movement z: 450 mm milling head swivelling by: 90/45 ° spindle taper: ISA 40 spindle turning taper: 56 - 4500 rpm tailstock stroke: 125 mm tailstock carriages: 0,035; 0,14; 0,7 mm/min spindle drive: 1,8/2,4 kW Godpfxsf Tc R Uj Ad Rebi space needed: 2000 x 1900 x 2300 mm weight: 1700 kg

Condition: good (used), functionality: fully functional, Table dimensions 1250 × 290 mm, 800 mm X travel 370 mm Y travel 450 mm Z travel automatic feed on drilling quill, 3 settings: 0.035 / 0.070 / 0.140 automatic feed and rapid traverse on X and Y axes electric rapid traverse on Z axis Spindle ISO 40 with speed range 56–4500 rpm, table load capacity up to 200–500 kg, Machine dimensions: 1.90 m (length) × 1.70 m (depth) × approx. 2.3 m (height) Gbjdpfjx E Atkjx Ad Roi machine weight approx. 1.7 tons. year of manufacture: 1986 Please note: The information on this page has been obtained and compiled to the best of our knowledge, but accuracy cannot be guaranteed. Accordingly, it does not constitute representation or a contract and we recommend you verify all relevant details. Financial information VAT/margin: VAT: The price shown is exclusive of VAT (VAT deductible for businesses).

Condition: ready for operation (used), functionality: fully functional, center height: 150 mm, grinding wheel diameter: 300 mm, overall weight: 3,000 kg, controller model: MARPOSS E54, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection between 08/04/2026 and 16/04/2026! TECHNICAL DETAILS Centre height over bed: approx. 150 mm Centre distance: approx. 700 mm Grinding wheel diameter: approx. 300 mm MACHINE DETAILS Control: MARPOSS E54 Operating voltage: 3 x 380 V Frequency: 50 Hz Rated current: 17.8 A Connection load: 9.84 kVA Dimensions & Weight Dimensions (L x W x H): 3,500 x 2,000 x 2,000 mm Gedpsylaf Nofx Ad Rebi Weight: 3,000 kg

Condition: new, New bellows (Führungsbahnabdechkungen) for tool milling machines produced by TOS / INTOS Zebrak. For enquiries, please indicate the exact type of machine. More parts available. Gbsdpfx Adodx Rfvs Rei

Condition: good (used), functionality: fully functional, BUA 25/1000 Gbodpfx Adowug A Is Roi

Condition: excellent (used), TOS four-sided planer and moulder 220/120 mm, 5 spindles, in excellent condition Gbodpfxoycgnlj Ad Rsi

Condition: ready for operation (used), chuck outer diameter: 1,620 mm, total height: 4,650 mm, empty load weight: 20,000 kg, + zijsteun Elektrisch vernieuwd in 2007!!! Max turningdia -- passage: 1700 mm Gbodpfxoyl A Hpe Ad Rji Power on the spindle: 37 kW Max hight of workpiece Z-axis: 1290 mm Digital screen: Heidenhain 2 axes Number of speeds: 3,5 - 150 rpm Long: 4550 mm Wide: 2670 mm

Year of construction: 1980, condition: used, turning diameter over bed 655 mm turning diameter over slide rest 390 mm turning length 1250 mm spindle bore 82 mm spindle turning speed range 9-1120 U/min feeds 0,049-3 mm/U total power requirement 12 kW Godpfx Adelc Uk Io Rebi weight of the machine ca. 5,2 t required space 3,5 x 1,9 x 1,7 m m

Condition: excellent (used), functionality: fully functional, Double-shaft multiblade saw TOS SVITAVY PWR 422 450/250mm Track width: 450mm Godpfx Adjycvf Tj Rebi Shaft width: 450mm Shaft diameter: 60mm Bushing diameter: 80mm Maximum cutting height: 20–250mm Saw blade diameter min/max: 250–450mm Maximum width of incoming material: 860mm Minimum length of incoming material: 900mm Saw motor power: 2x110kW Feed speed adjustable via frequency inverter: 4–40 m/min

Condition: good (used), Universal milling head, milling chuck, milling extension, angle milling head, universal angle milling head, milling angle head -Manufacturer: TOS, Universal milling angle head from TOS FB25-V milling machine -Recording output: SK50 -Recording: Input gear -Milling head: fully swivelling -Stroke: 55 mm Gsdpegxqt Aofx Ad Robi -Recess recording: mm -Bolt circle: mm -Transport dimensions: 780/490/H430 mm -Weight: 224 kg

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck Gbodpfx Ajwucf Sed Rei -Manufacturer: TOS, three-jaw chuck chuck size Ø 125 mm -Passage: Ø 35 mm -Bolt circle: Ø 108 mm -Accessories: incl. 2nd set of interchangeable jaws -Dimensions: Ø125 x 70 mm -Weight: 4.1 kg

Condition: good (used), Dividing head, dividing head, rotary table, rotating table -with translation: 1:40 Gbedpfxedc R N Tj Ad Rei -Indoor recording: MK4 -Peak height: mm -Passage: Ø 32 mm -Dividing head: swiveling -Dimensions: 430/430/H280 mm -Weight: 83 kg

Condition: used, Tailstock, counter bearing for dividing head, dividing attachment -Tip height: 135 mm -Recording: MK2 Gbjdpfx Asb Hbx Njd Rei -Drawing with the photos -Price: per piece -Number: 2 pieces -Dimensions: 200/75/H145 mm -Weight: 5 kg

Condition: used, Year of construction: 1987, Technical details: max. pitch circle diameter: 360/24 mm weight of the machine approx.: 46 kg centre height: 130 mm swivable: ja ° rotation movement: 360 Grad dimensions: 350 x 450 x 260 mm Application: For auxiliary work e.g. scribing of graduations. -dividing attachment with chuck Ø 125 in 360° pitch circle -clamping takes place via grid with index -pitch circle 24 -chuck: Ø 125mm, with revolving scale; through hole Ø 17mm; without jaws -base plate: size 260 x 300mm, with 2 clamping grooves WxL: 15 x 21mm - chuck key - 2 pieces groove stone Gbjdpfou Nlg Tjx Ad Rsi *

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: C210068/9002194, grinding length: 750 mm, grinding wheel diameter: 400 mm, total width: 2,750 mm, total length: 1,950 mm, total height: 1,750 mm, grinding diameter: 250 mm, Machine complete with filter unit and documentation. Grinding diameter (maximum workpiece Ø): 250 mm. Centre distance / maximum grinding length: 750 mm. Grinding wheel (max. size): 400 × 40 × 127 mm. Grinding spindle motor power: 5 kW. Grinding wheel speeds: approx. 2140 / 2640 rpm. Workpiece mounting: between centres, tailstock; suitable for external cylindrical grinding. Dimensions (L / W / H, approx.): 2750 mm / 1950 mm / 1750 mm. Machine weight: approx. 3.9 t (≈ 3900 kg). Godpfsxz Tvxsx Ad Robi

Year of construction: 2009, condition: reconditioned (used), 4-SIDED 5-HEAD PLANER TOS SVITAVA LIGNUM 4-SIDED 5-HEAD PLANER TOS SVITAVA LIGNUM 5-HEAD PLANER 240 MM WITH A GROOVED TABLE AFTER A COMPLETE RENOVATION FWH 225mm 23kW total power Gbodpfxendcg Nj Ad Rsi

Condition: excellent (used), functionality: fully functional, I am selling this machine, connected and can be tested. Can send a video of the machine via whatsapp. Swing diameter over bed: 1250 mm Swing diameter over slide: 940 mm Center distance: 5000 mm Gbsdpfx Adjv Nw D Ho Rei Spindle bore: 102 mm

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 844 12 64, turning diameter over cross slide: 215 mm, spindle bore: 40 mm, turning diameter: 380 mm, center height: 190 mm, center width: 1,250 mm, quill stroke: 120 mm, total length: 3,020 mm, total width: 950 mm, total height: 1,500 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 14 rpm, overall weight: 1,850 kg, quill mount: MK 3, workpiece weight (max.): 300 kg, Trade show lathe, available from stock. After Trens filed for bankruptcy, we made an effort and had TOS and later Trens lathes completely overhauled. All machines were disassembled down to the last screw. Here is a run-through of a general overhaul at our company: 1. Machine cleaning, disassembly of the individual machine components 2. Grinding: bed, slide, cross support, spindle, tailstock quill 3. Grinding + scraping of the upper support guideways, replacement: trapezoidal screw with nut and V-ledge 4. Scraping of the guide surfaces: spindle, slide, cross support, and tailstock to geometric positions according to the accuracy report 5. Replacement: screw with nut, V-ledge, and Multifix base body for the cross support (including 2 turning tool cartridges) 6. Complete disassembly and replacement of the necessary spare parts in the lock case, threaded housing, headstock, gear box, tailstock, cross support, and upper support 7. Installation, replacement if necessary, of racks, repair of the lead screw and feed screw 8. Complete bearing replacement in all machine assemblies Gbodpfxjv Hzqxo Ad Rsi 9. Complete replacement of machine plates 10. Priming of the machine, sealing, sanding, polyurethane topcoat, and painting of the machine accessories - white RAL 9003, anthracite RAL 7016 11. New control cabinet with electrical components, replacement: main motor, rapid traverse motor, hydraulic pump, cabling, and LED lighting of the work area 12. Preparation of the accuracy report and the electrical test report 13. Inspection and machine acceptance at the factory All refurbished machines have a CE certificate and a 12-month warranty. CE version: - Chuck guard with limit switch - Front chip guard mounted on slide - Rear chip guard - Lead screw and feed screw covers - Brakes after emergency stop within 2 seconds Special accessories (used): - Three-jaw lathe chuck Ø 190 mm - Four-jaw lathe chuck Ø 190 mm - Three-jaw lathe chuck Ø 240 mm - Four-jaw faceplate Ø 320 mm - Support center for bed slide - Various chuck jaws (10 pieces) - Collet set Ø 2 - 25 mm with collet chuck + drawbar - Special collet set (10 pieces) with collet chuck - 4-way tool holder

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 2,500 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, torque: 1,200 Nm, controller manufacturer: HEIDENHAIN TNC 530, workpiece diameter (max.): 3,000 mm, workpiece weight (max.): 60,000 kg, total height: 5,560 mm, total length: 11,550 mm, total width: 10,750 mm, table width: 3,000 mm, table height: 800 mm, table length: 3,000 mm, table load: 60,000 kg, rotary table diameter: 3,000 mm, rotational speed (min.): 10 rpm, rotational speed (max.): 2,500 rpm, overall weight: 87,000 kg, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We offer a used FUE 125 W/4 milling and boring machine, manufactured in 2011, equipped with the HEIDENHAIN iTNC 530 HSCI control system and HR410 handwheel, HEIDENHAIN digital drives, standard design, metric version, AC 3PE˜50Hz, 400V connection. Travel ranges: • X-axis (longitudinal): 4,000 mm • Y-axis (cross): 1,250 mm Gbjdpfx Adoxp U U Se Rji • W-axis (spindle extension): 800 mm, spindle diameter 130 mm • Z-axis (vertical): 2,500 mm • Rapid traverse X1: 20,000 mm/min • Rapid traverse Y, Z1: 10,000 mm/min Machine specifications: • Metric version: Yes • Spindle head design: Extendable working spindle (W axis) + 3 automatically exchangeable accessory heads • Tool clamping: ISO 50 • Power: 28 kW • Spindle taper: ISO 50, DIN 69 871 clamping • Automatic accessory head IPS with automatic spindle positioning for H/V orientation, 2,500 rpm / 1,200 Nm • Automatic accessory head IZN1 for turning, CAPTO 6 clamping • Automatic accessory head IZN2 for turning, CAPTO 6 clamping Control and accessories: • HEIDENHAIN iTNC 530 HSCI • HEIDENHAIN HR 410 wired handwheel • Cooling unit for spindle head thermal stabilization • High-pressure through-spindle cooling: 20 bar / 30 l/min / 180 l • External low-pressure cooling: 5 bar / 60 l/min / 1,200 l Clamping area in front of the machine: Optional Currently equipped with a rotary traversing table (KES) with carousel function (option: configurable as plate or table) • Dimensions: 3,000 x 3,000 mm, V (Y) axis = 1,500 mm • Load capacity: 60,000 kg (hydrostatic) • Speed range: 1 - 80 rpm • T-slot dimension (base clamping plate): 28 H11, central 28 H8 • T-slot pitch and count: 200 mm, 15 slots • Centering hole: 100 H7 • Rotational axis drives: MASTER-SLAVE, 2x SIEMENS motor • Additional carousel plate, diameter 3,000 mm, 8-way star-shaped slot configuration For further options and accessories or to arrange an inspection, please contact us.

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: CNGL65155, Toshiba ES-2515AC This is a Toshiba ES-2515AC copier in very good condition, offering high copy quality with a low page count. Meter reading: 79,000 total copies (39K black & white and 40K color copies) Features: PCL / PS / Scan to Email / Paper feed unit with 3 cassettes Technical data: Power supply: 220-240 V, 50-60 Hz CM SOLUTIONS is today one of the leading French and European companies in the purchase, sale, and remarketing of refurbished office equipment. By integrating transparency, expertise, and ethics at every level of our activity, we offer our customers high-performance products at competitive prices. Gbsdpfstxnkgox Ad Roi Why do customers choose CM Solutions? - 28 years of international experience in over 50 countries - 20 equipment brands: Ricoh, Kyocera, Xerox, Toshiba, Canon, Konica Minolta, and more - A large stock of 2,000 copiers available immediately - A team of qualified technicians Please feel free to contact us for more information.

Condition: used, Indexable insert drills, high performance drills with indexable inserts, solid drills, end mills, end mills, milling cutters, indexable insert mills, end mills with internal cooling, indexable insert end mills -Finger milling cutter: indexable insert end mill with internal cooling, 2 pieces Gbedpsrk S Dxofx Ad Rji -Receptacle: Ø 25 mm -Diameter: 25 and 30 mm -Levy/Price: complete -Transport dimensions: 210/70/H40 mm -Weight: 1.0kg

Condition: used, total length: 3,900 mm, total width: 1,500 mm, total height: 1,600 mm, Empty weight: 2.940 kg Price: On request - Documentation available: Yes - CE certificate present: No - Drive system: Conventional - Centre height [mm]: 335 - Swing over bed [mm]: 630 - Distance between centres [mm]: 2000 - Bed width [mm]: 455 - Spindle bore [mm]: 80 - Min. spindle speed [rpm]: 10 - Max. spindle speed [rpm]: 1000 - Options: Four-jaw chuck, Removable bed, Fixed steady, Three-jaw chuck - Transport dimensions: 3900mm x 1500mm x 1600mm (l x w x h) - Transport weight [kg]: 2940kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Gbedsytn Eyepfx Ad Rji Lukas van Rossum

Condition: used, total height: 1,600 mm, total length: 5,000 mm, total width: 1,600 mm, Empty weight: 3.190 kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Centre height [mm]: 315 - Swing over bed [mm]: 630 - Distance between centres [mm]: 3000 - Spindle bore [mm]: 80 - Min. spindle speed [rpm]: 10 - Max. spindle speed [rpm]: 1000 - Options: Digital readout, Removable bed - Swing over removable bed [mm]: 900 - Type of digital readout: 2 assen - Control: Conventional - Transport dimensions: 5000mm x 1600mm x 1600mm (l x w x h) - Transport weight [kg]: 3190kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Gsdswnitiopfx Ad Robi Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 1999, Ref. -No.: 10638 Manufacturer: TOS HULIN Gbodpjytqy Tsfx Ad Rei Type: SKA 12 CNC Year of construction: 1999 Type of control: CNC Control: Sinumerik 840 C Storage location: Halberstadt Country of origin: Czech Republic Turning Diameter: 1450 mm Turning Height: 1450 mm Tool Taper: SK50 Power Capacity: 60 kW Planar disk: 630 RPM Planar disk: Ø 1250 mm Head Magazine: 30 academic subject Plate magazine: 24 academic subject Further information: - Hydraulically operated power chuck - Drive for rotary tools - Third controlled C-axis - Heidenhain linear scales in X and Z - Chip conveyor and extraction system - Renishaw for tool control The machine can be viewed under power by arrangement.

Condition: good (used), Year of construction: 2013, Control: Heidenhain iTNC 530 Spindle diameter: 130 mm X-axis travel: 5000 mm Y-axis travel: 3000 mm Z-axis travel: 1600 mm W-axis travel: 800 mm B-axis: Double pinion 0.001° Rapid traverse: 10 m/min Table size: 1800 x 2500 mm Table load capacity: 25 tons Spindle power: 37 kW Godsyr Nmiopfx Ad Robi Spindle speed: 3000 rpm Tool changer: 40-fold Chip conveyor