Used broaching & slotting & drawing machines for sale (171)

Condition: good (used), overall weight: 10,364 kg, Year of construction: 2019, 2019 GENERAL BROACH 10-30 GBTU VERTICAL TABLE UP BROACH Equipped with: Retriever Kjdpfxertrzao Agqell Shuttle Table Chip Conveyor Auto Load Grayco Lube AB Panelview Coolant Tank & Pump Specifications: Capacity: 10 Ton Stroke: 30" Table Up 1″ Puller / Retriever Hydraulic Power Unit Chip Conveyor Machine Dimensions (approx.): 165″ x 48″ x 60″ Machine Weight Total (approx.): 22,800 lbs. Machine Column (approx.) : 13,000 lbs. Base w/ Chip Conveyor (approx.): 4,700 lbs. Electrical Panel (approx.): 600 lbs. Hydraulic Power Unit (approx.): 4,500 lbs.

Year of construction: 1978, condition: good (used), U.S. MODEL 50TX120 VERTICAL PULL DOWN BROACH Equipped with: Retriever Puller Klodpfxortrzlj Agqel Hydraulic System Coolant System Chiller Chip Conveyor Manuals Specifications: Normal Broaching Capacity: 100,000 Lbs at 922 PSI Peak Force Capacity: 133,600 Lbs at 1350 PSI Main Slide Stroke (Bump Inches): 106 Maximum Cutting Speed: 20 Ft/Min. Maximum Return Speed: 40 Ft/Min. Main Pump Motor: 75 HP at 900 RPM Hydraulic Reservoir: 365 Gallons Handling Pump Motor: 10 HP at 1200 RPM Coolant Pump Motor: 1.5 HP at 1800 RPM Coolant Pump Capacity: 100 Gallons / Min at 23 Head Ft. Coolant Reservoir Capacity: 600 Gallons Approx. Floor Space ( Width x Depth x Height): 65" x 96" x 243" Net Weight, Approximate: 79,000 #

Condition: good (used), Cardinal Broach Kledpeq R T Hcefx Agqol Model TM7

Condition: good (used), Year of construction: 1956, Slotting machine, slotting machine, quick planer, keyseating machine, slotting machine, slotting machine, slotting tool, broaching machine, slotting machine, horizontal slotting machine, planing machine, schepping -Manufacturer: Elliott, horizontal shaping machine type 24M SHAPER -Stroke: 610mm -Stroke rate: 8 - 74 1/min Kjdoh Nvy Eepfx Agqoll -Clamping table: 580 x 330 mm -Travel: X/Y/Z 375/755/292 mm -T-Slot: 20mm -Drive: 3.7 kW -Dimensions: 2080/1120/H1550 mm -Weight: 1520 kg

Condition: good (used), max. ram stroke 400 mm throat 900 mm table diameter 1000 mm Ksdeya Iilepfx Agqsll ram adjustment 1000 mm ram swivable +/- 12° longitudinal adjustment 950 mm cross adjustment 750 no. of strokes 11 - 60 Hub/min table diameter 1000 mm table load 4 t total power requirement 12 kW weight of the machine ca. 8,2 t dimensions of the machine ca. 3,4 x 2,2 x 3,1 m

Condition: used, Year of construction: 1964, serial number 23046 stroke 320 mm +++++ Please note: Kodofgpdropfx Agqjll The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1989, stroke 600 mm Klodpfxsw Sykfe Agqol hydraulic ja keins dabei weight 3,7 t

Condition: used, Multi-wedge broach, hexagonal broaching tool, broaching tool, broach, special tool, grooving tool, grooving machine, slotting machine, slotting machine, slotting tool, slotting broach -Manufacturer: SWZ, broach, impact broach -Type: SW 19 1TGL 29-16600/02 20/50 HSS -Item no.: 440 0432 08 102 04708 -Width: Hexagonal 19 mm wrench width, see photos -Quantity: 1 piece available Kjdpfxjitt R So Agqjll -Total dimensions: 950/22/22 mm -Weight: 1.7kg

Condition: used, Broaching tool, broaching needle, special tool, grooving tool, keyseating machine, keyway broaching machine, keyway broaching machine, keyway broaching tool, broaching needle -Manufacturer: Planeta Coswig, broach push broach -Type: 16D11x2.7 34-120inSt 34-165inGG Klsdpfjitt Saox Agqsl - Width: 16mm -Number: 1x available -Total dimensions: 1250/16/H30 mm -Weight: 4.2kg

Condition: excellent (used), Broaching tool, broaching needle, special tool, grooving tool, keyseating machine, keyway broaching machine, keyway broaching machine, keyway broaching tool, broaching needle -Manufacturer: SWZ, broach push broach -Type: B 6 J9x1.8 RL 24-72mm -Item no.: 45 0014 -Width: 6mm -Number: 2x broach available -Price per piece Kjdoitt Ryepfx Agqsll -Total dimensions: 900/6/H13 mm -Weight: 0.5 kg/pc.

Condition: used, Broaching tool, broaching needle, special tool, grooving tool, keyway machine, keyway machine, keyway tool, keyway broaching needle -Manufacturer: SWZ, broaching needle Kjdpfx Ageitt R Ioqoll -Type: SW 22 F8x28,35 RL 20-50 mm -Article No.: 24 3039 174 208 020 TKC -Width: Square 22 mm -Quantity: 3 pieces available -Price per piece -Total dimensions: Ø 22 x 925 mm -Weight: 2.1 kg/piece

Condition: used, Square broaching tool, multi-wedge broaching needle, broaching tool, broaching needle, special tool, grooving tool, keyway machine, keyway machine, keyway tool, keyway broaching needle -Manufacturer: SWZ, broaching needle Kljdpfx Agekkzymjqjl -Width: Square 17 mm wrench size, see photos -Type: unfortunately no longer readable -Size: see photos -Quantity: 1 piece available -Total dimensions: Ø 19 x 955 mm -Weight: 1.3kg

Condition: ready for operation (used), Year of construction: 2007, Immediately available ex-location: Hydraulic Horizontal Broaching Machine Hahndorf Model HRH 1200/4 Year of manufacture: 2007 Pulling force: 4 t Broach length: 1200 mm Maximum keyway width up to 22 mm Broaching speed: 0 – 6.5 m/min Kljdpfeyax U Sex Agqjl Rapid return: 10 m/min Automatic tool clamping Drive: 5.5 kW Mounting plate: 350 x 350 mm Numerous holders and broaching tools included Weight: 750 kg Price: EUR 4,750 plus VAT, ex-site

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, machine/vehicle number: M 09074, overall weight: 950 kg, power: 8 kW (10.88 HP), input voltage: 400 V, Technical Specifications: Manual Adjustment: 400mm manual adjustment Automatic Broaching Stroke: 250mm, automatic stroke Keyway Widths: 2 to 32mm Workpiece Diameter: 620mm Maximum Thrust Force: 20kN fixed value Cutting Speed: 15 m/min, infinitely variable Dimensions (W x D x H): 1000 x 1200 x 2440mm Net Weight: approx. 950kg Electrical Connection: 3 x 400 VAC, 50/60 Hz, 8kW Pneumatic Connection: not required Klodpfx Aeyazc Ssgqjl Colour: Blue RAL 5001, Grey RAL 7035 For further details, please see the PDF description in the attachment.

Year of construction: 1948, condition: used, Technical details: max. ram stroke: 450 mm table diameter: 800 mm min. ram stroke: 65 mm workpiece height max.: 600 mm ram adjustment: 600 mm no. of ram strokes: 18; 22; 28; 35; 45; 56 Hub/min. cross feed of the table: 800 mm longitudinal feed of the table: 1000 mm table rotation: 360 ° feed: Tisch: pro Hub: 0,14 - 0,22 - 0,35 - 0,56 - 0,9 -1,4 mm/Hub total power requirement: 7,8 kW weight of the machine ca.: 6,25 t dimension machine xH: 2,8 x 1,9 x 3,0 m other features: Ram: -the ram is adjustable in the projection of 900mm -throat of bed = 700mm Tool clamp by means of bracket clamp (dimensions 350 x 250mm) Accessories: 1piece 3-jaw chuck Ø 250mm * Kljdpfx Agsu Ng Tbjqjl

Condition: used, Year of construction: 1954, Technical details: max. ram stroke: 220 mm workpiece diameter - max.: 400-450 mm total power requirement: 1,5 kW Kledpfx Agsv Ty R Djqjl work table:: 650x250 mm ram adjustment: 100 Manuell mm no. of ram strokes: 45/78/125 table adjustment: 400 längs mm table adjustment: 150-170 quer mm table adjustment: ca. 360 vertikal mm tool - head swivelling: +/- 10 Grad total power requirement: 1,5 kW weight of the machine ca.: 0,9 t dimension machine xH: 1,2 x 0,9 x 1,8 m

Year of construction: 1948, condition: used, Technical details: max. ram stroke: 180 mm adjustment of stroke: 100 mm no. of ram strokes: 45 / 73 / 125 Hub/min distance table/ram: 400 mm work table:: 650 x 250 mm total power requirement: 2,0 kW voltage: 380 V dimension machine xH: 1,3 x 1,0 x 1,9 m Kodpeu Ng Tnofx Agqell VERTICAL BROACHING MACHINE for the machining of keyways on flanges and/or bushes table adjustment: lengthwise=420 mm manual / 400 mm automatic, crosswise=150mm; vertical=300mm mechan. Drive The stroke is adjusted on the crank disk by means of a threaded spindle. Inclined position of the ram guide with ram 10° Rotation of the drive disk per min. = 400 rpm. The machine does not comply with the legal safety requirements of the UVV (UVV = accident prevention regulations) . Sold as is, without test. *

Year of construction: 1963, condition: used, Technical details: max. ram stroke: 150 mm workpiece diameter - max.: 250 mm slot width: 50 mm feed speed: 10 m/min. adjustment of stroke: ja mm voltage: 380 V work table:: Ø 250 mm total power requirement: 6,0 kW weight of the machine ca.: 1,05 t dimension machine xH: 1,2 x 0,8 x 1,6 m Application: For the internal grooving of flanges Drawing needle specifications: -total length = 650mm -Width = 10; 20; 30; 50mm -Drawing length = approx. 150mm Lubrication takes place via the drawing needles. Equipment: Klsdpfeu Ng T Usx Agqol 4 different drawing needle guides (5; 22; 32 and 50mm) 50 different flange holders 23x drawing steel holders shank 18mm; 12x shank 22mm; 7x shank 26, 30, 40 and 45mm incl. accessories see photo i.D. *

Condition: good (used), Hello, For sale: Slotting Machine type HOV-2S. Kjdpfx Aexyi Saogqjll The machine is operational and in continuous use; inspection and testing are possible. The price listed in the advertisement is net and VAT must be added. The machine can be viewed in Starachowice at 13 Kwiatkowskiego Street. Telephone contact from 7:00 to 16:00.

Condition: new, functionality: fully functional, Year of construction: 2026, Vertical Broaching Machine VADARI GmbH Type SRM 2027- 60 kN – New Machine – BROACHING MACHINES MADE IN GERMANY ==> Latest update: A fully refurbished used machine will soon be available again after reconditioning. Please inquire separately! ==> Information for manufacturing companies or dealers with their own production: If required, the drawings, rights, spare parts, customer and prospect data, planning and production documents (including plans for a 9-ton pulling force variant) for the broaching machine can be acquired from us. If interested, please contact us. ==> Our new machines are manufactured to order. Rapid production and delivery possible. ==> Currently, spare parts such as spindles and spindle nuts for Wolff SRM and VADARI SRM broaching machines are available for immediate delivery. Cost-effective and extremely robust vertical broaching machine designed for long-term use. Broaching tools (including custom needles for internal splines, etc.) and accessories are available. Please inquire for details. All types of broaching tools and tool holders from other manufacturers can also be used with our broaching machine! Complete manufacturing and assembly are carried out at our facility in Germany. Prompt delivery available by arrangement. Additionally, we supply spare and wear parts (spindles, spindle nuts, motors, gears, and all necessary components including electrical parts) for both Wolff and VADARI SRM broaching machines. Vertical Broaching Machine Type SRM 2026 – NEW MACHINE: The machine is primarily intended for producing keyway slots from 3–28 mm, as well as profiles of similar dimensions. Its compact footprint allows for successful use in small, medium, and large businesses. The low price makes it suitable even for small production runs and one-off manufacture. The drive is provided by a multi-speed gear brake motor. The maintenance-free double spindle drive ensures smooth operation and a central pulling point, resulting in consistent cutting performance. The open tool table enables convenient placement of even large workpieces. In most cases, workpieces do not require clamping. Stroke adjustment is controlled by adjustable limit switches with stroke limitation. For short hubs/workpieces, multiple parts can be stacked on top of one another. Broaching needles, mandrels, and spare parts available at favorable terms upon request. Technical Data: Pulling force: 60 kN at 3 m/min; 40 kN at 6 m/min Broaching speed: 3 m/min + 6 m/min (Optional: stepless speed control from 0 m/min to 6 m/min via extended electronics) Return speed: 6 m/min Stroke: 1050 mm Broaching tool length: 1200 mm Workpiece diameter: unlimited Work table: 450 x 350 mm Table opening: 140 mm Weight: approx. 510 kg Footprint: 750 x 570 mm Total machine height: 1510 mm Drive power: 3.7 / 4.4 kW Electrical equipment: 400 / 230 Volts, 50 Hz Control voltage: 230 Volts Operating voltage: 400 Volts, 50 Hz Paint finish: Exterior RAL 7035/7036/7016, Interior RAL 3000 or customized Safety door: Standard equipment Coolant system: Standard equipment The machine complies with the latest Machinery Directive Ksdpfx Asuqbnhegqell and is CE marked.

Condition: ready for operation (used), A Welter shaping machine for gear cutting and profile machining is available. Stroke: 1250mm, machine dimensions X/Y: 3800mm/5600mm. Documentation available. On-site inspection is possible. Kledox Uq Twopfx Agqol

Condition: reconditioned (used), functionality: fully functional, cutting length (max.): 3,150 mm, ESPE HYDRAULIC guillotine shears model CNTA 16A/3150 FOR cutting sheet metal Output parameters of the machine: - maximum cutting length - 3150mm, - maximum thickness of cut sheet metal - 16mm, - table width - 160mm, - cutting angle - 0.5 - 2.5 degrees hydraulically adjustable, - working height of the table - 850mm, - beam drive and sheet metal pressure - hydraulic, - adjustable gap - electric drive, - adjustable depth (width) of cut - depending on the set angle, - main drive 30kW, - auxiliary drives 2.5kW, - adjustable numerically controlled bumper - AC servonap, Klsdpfx Ajuq Eh Sogqol - friendly and simple CNC numerical control - weight about 16500kg, CNC control: Control built on the basis of industrial automation components (from Delta Electronics) equipped with a touch-screen operator panel for setting work parameters: - setting the thickness of the material (automatic slot adjustment) - setting the knife working depth (cutting width - reducing time when cutting narrow details) - setting the position of the cut material bumper - setting the working angle of the knife - possibility to program a sequence of cuts up to 50 operations for one sheet (automatic change of depth setting, bumper setting, sheet thickness, knife angle setting, cutting width) after each cut. This makes it possible to cut the entire sheet in a preset sequence, without the need to constantly rearrange the sheets.

Condition: good (used), Keyseating machine FRÖMAG RAPIDA 463 incl. indexing table - Keyway width producible: 3 - 63 mm Ksdpfx Ajx Tyx Hjgqoll - Maximum keyway length: 600 mm - Indexing table - For bores from 10 - 500 mm - Feed size: 0.01 - 0.25 mm - Cutting speed steplessly adjustable 2 - 22 meters/min - Return speed - constant 50 meters/min - Load capacity: 3000 kg - Connected load: 4.6 kW - Including work platform - Various broaching needles and corresponding accessories in the tool cabinet Dimensions: LxWxH (machine): 1.6x1.5x2.3 meters / weight 3500 kg Subject to errors and data entry mistakes.

Condition: used, Year of construction: 2000, Technical details: pulling force - max.: 2,5 t max. ram stroke: 1000 mm max. workpiece diameter: 40 mm Broaching speed: 60 m/min. return speed: 20 m/min. total power requirement: 24 kW weight of the machine ca.: 6 t Kjdpfxjw Dugas Agqjll dimensions of the machine ca.: 1,7 x 2,4 x 4,77 m clamping plate: 320 mm It is a hydraulic machine. *

Condition: used, Year of construction: 1987, stroke length max. max. 1300 mm max. groove width C45/GG 20/26 mm pulling force - max. 3 t Table dimensions 500 x 220 mm cutting speed 2 / 4 m/min return speed 3 m/min power requirement 3 kW voltage 400 V total power requirement 3 kW weight of the machine ca. 385 t dimensions of the machine ca. 0,5 x 1,0 x 1,50 m Serial No..: 17136 Kledpfjx Ny Aqox Agqol Stroke adjustable up to max. 1300 mm.