Slotting machine

STANKOIMPORT 450

Condition: excellent (used), Year of construction: 1981, functionality: fully functional, machine/vehicle number: 2172, travel distance X-axis: 1,000 mm, travel distance Y-axis: 630 mm, feed rate X-axis: 400 m/min, feed rate Y-axis: 400 m/min, feed rate Z-axis: 300 m/min, table length: 1,120 mm, table width: 630 mm, total length: 2,760 mm, table height: 2,800 mm, total width: 3,306 mm, rapid traverse X-axis: 1 m/min, rapid traverse Y-axis: 1 m/min, rapid traverse Z-axis: 1 m/min, drilling capacity: 30 mm, Dimensions of the working surfaces: - Maximum stroke of spindle - min.270mm Crsdpfx Aeunrhask Aoi - Spindle extension - 710mm - Distance from spindle end to working table - least 200mm greatest 750mm - Internal spindle cone acc.to GOST 15945-70 - metric 45 - Machine weight (without electrical equipment and accerssories) - 6890kg Table and skids: - Nr.of table slots - 7 - Securing the table and sleds - mechanical - Screen counting method - optic - Screen resolution value- 0,001mm Spindle: - Boring capacity: 250mm - The accuracy of processing a given size at a feed rate no more than 150mm/min - 0,2mm - Force allowed by the feed mechanism - 600kgs - Spindle RPM limits (within two gears): 1st gear- 32-400 RPM, 2nd gear - 160-2000 RPM - Maximum vertical mechanical displacement - 330mm Extras: coilets, tool holders, other additional equipment, documentation for machine

Condition: used, turning diameter over cross slide: 710 mm, spindle bore: 180 mm, turning diameter: 1,000 mm, turning length: 4,000 mm, quill stroke: 250 mm, quill diameter: 125 mm, spindle speed (max.): 800 rpm, spindle speed (min.): 6 rpm, bed width: 560 mm, overall weight: 9,700 kg, Equipment: rotational speed infinitely variable, KRAFT BV-40160 – USED HEAVY-DUTY LATHE A KRAFT BV-40160 from a company liquidation. Originally delivered to the previous owner as new from the factory in 2016/2017. On-site inspection or via video call is possible at any time. KEY FEATURES - Conventional guide and lead screw heavy-duty lathe, turning diameter 1,000 mm, distance between centers 4,000 mm - Additional guide for the tailstock on the lower machine bed - Frequency-controlled main drive 22 kW - Swiveling 4-position tool holder TECHNICAL DATA - Turning diameter over bed: 1,000 mm - Turning diameter over cross slide: 710 mm - Swing diameter in the gap: 1,280 mm, gap width 450 mm - Center height: 500 mm - Distance between centers: 4,000 mm - Bed width: 560 mm (3V + 1 flat), additional tailstock guide on the lower bed - Cross slide width: 350 mm - Spindle bore: 180 mm, spindle nose A2-15 - Spindle speeds: 4-speed, continuously variable 6-800 rpm - Main motor: 22 kW with frequency inverter - Cross movement of tailstock: 550 mm, upper slide movement: 225 mm - Tailstock quill Ø 125 mm, stroke 250 mm, taper MK 6 - Tool bit cross-section: 40 mm - Lead screw: Ø 60 mm x 2 T.P.I. - Weight: net approx. 9,000 kg / gross approx. 9,700 kg - Dimensions: approx. 5,845 x 1,950 x 1,925 mm Cedszi Duhepfx Ak Asri STANDARD EQUIPMENT - Coolant system - Fixed steady rest Ø 60-380 mm - Swiveling, manual 4-position tool holder - Sliding chuck guard with electrical interlock - Swiveling, electrically interlocked guard for the upper tailstock - Traveling, rear chip / splash water guard - Halogen machine lamp - Installation / leveling elements, machine tools - German and English technical documentation, CE version - 400 V, 50 Hz, 3-phase CONDITION Used machine from a company liquidation. Sold "as is, where is", no warranty. On-site inspection or via video call is strongly recommended. OUR SERVICE Online or on-site factory inspection, transport organized on request, assembly, commissioning and operator training by our service technicians, direct German-speaking contact person for spare parts and support, member of the FDM, the trade association of the machine and tool wholesale trade. Since this is a single item, subject to prior sale. Please call or write to us, and we will arrange an inspection appointment as soon as possible.

Condition: good (used), Year of construction: 2007, Manufacturer: Volz BMT Year of manufacture: 2007 Control: conventional with digital readout (DRO) Country of origin: Taiwan Swing diameter: 660 mm Max. turning length: 2000 mm Spindle bore: 85 mm Spindle mount: D1-8 Spindle motor: 7.5 kW Spindle speed: 17–1200 rpm with steady rest with digital readout (DRO) Cjdpjx Uw S Hofx Ak Aeri with thread cutting function

Condition: good (used), functionality: fully functional, Year of construction: 2015, Four-Roller Plate Rolling Machine Manufacturer: FACCIN Model: 4HEL 2122 Year: 2015 Technical Specifications Brand: FACCIN Model: 4HEL 2122 Year of manufacture: 2015 Working width: 2050 mm Roll geometry: Linear guides Top roll diameter: 225 mm Bottom roll diameter: 210 mm Side roll diameter: 165 mm Bending force against top roll: 100 t Motor power: 9 kW Dimensions (approx.): L 3.50 x W 1.20 x H 1.10 m Weight (approx.): 4,200 kg Performance Rolling capacity (full working width): 12 mm Pre-bending capacity (full working width): 8 mm From tube diameter: 1,125 mm With yield strength: 260 N/mm² Rolling capacity (full working width): 8 mm Pre-bending capacity (full working width): 6 mm From tube diameter: 295 mm Csdpfxozguume Ak Aeri With yield strength: 260 N/mm² Rolling capacity (full working width): 8 mm Pre-bending capacity (full working width): 6 mm From tube diameter: 1,125 mm With yield strength: 360 N/mm² Rolling capacity (full working width): 6.5 mm Pre-bending capacity (full working width): 5 mm From tube diameter: 295 mm With yield strength: 360 N/mm² Rolling capacity (half working width): 15 mm Pre-bending capacity (half working width): 10 mm From tube diameter: 1,125 mm With yield strength: 260 N/mm² Equipment - Double linear guide system for roller movement - Extra wide bearing blocks - MCS double bearing system for roll rotation - Extra heavy-duty, doubly supported drop end bearing - Electronic parallelism system (EPS) - Hardened rolls for maximum wear protection and reduced sheet damage - All rolls polished after heat treatment - SIEMENS S7 PLC touch control - Safety cable with emergency stop and CE certification - Water cooler for hydraulic unit All details without guarantee. A live demonstration under power is possible at any time in our showroom.

Condition: new, pressure 60 t stroke 400 mm daylight longitudinal/sideways 820 x 300 mm dayligth 900 mm liter capacity 6,5 l feed down 6,1 mm/sec feed up 10 mm/sec Motor output 2,2 kW Cedegg Nn Sopfx Ak Aori weight of the machine ca. 0,675 t dimensions of the machine ca. 1,2 x 0,85 x 2,1 m Presses can be operated both by hand and by motor. Cylinders can be moved sideways. Safety valve with cylinder end position. CE marking

Condition: good (used), Year of construction: 2017, turning height: 1,600 mm, workpiece weight (max.): 16,000 kg, Videos of the machine in operation can be provided upon request. Max. turning diameter: 3200 mm Table diameter: 2800 mm Crjdpfjyrflzex Ak Asi Max. turning height: 1600 mm Max. workpiece weight: 16,000 kg Table speed range: 70 rpm Number of table speed ranges: constant Vertical movement in the Z-axis (ram stroke): 1100 mm Horizontal slide travel in the X-axis: 1720 mm Working feed rate range: 2 - 2000 mm/min Rapid traverse in the X/Z axis: 7 m/min Crossrail traverse: 360 mm/min Main motor power: 55 kW Installed power: 69 kW Dimensions: 5500 x 6540 x 4900 mm Weight: 43,000 kg

Condition: new, Technical data: Capacity: 60 t Installation height: 820 mm Working area, max.: 820 x 300 mm Credpfxek Nz Ndo Ak Aei Piston stroke: 400 mm Forward speed: 6.1 mm/s Return speed: 10 mm/s Motor power: 3 kW Width: 1460 mm Depth: 850 mm Height: 2400 mm Weight, approx.: 700 kg Features: - Cylinder that can be shifted laterally - Generous working area - Height-adjustable table - Torsion-resistant design made of welded steel - Pressure gauge - Fine pressure adjustment - Additional hand pump Support prisms available at an extra charge.

Year of construction: 1985, condition: reconditioned (used), REFORM Type AR 10, Type 40H Face grinding machine Year of manufacture: 1985 30 kW grinding motor Modicon control system Magnetic control, 6 stages Magnetic size: 1000 mm x 300 mm Crodpfjd E Np Eex Ak Aoi Segment head diameter: 460 mm Segment dimensions: 90 x 38 x 180 mm Number of segments: 1 set = 8 pieces Grinding motor feed: 0.01 mm - 0.1 mm, continuously adjustable Hydraulic oscillating drive New power cables between machine and control cabinet

Condition: good (used), Year of construction: 1968, Malcus MC40 Centerless Cylindrical Grinding Machine Manufacturer: Malcus Halmstad, Sweden Model: MC-40 Year of Manufacture: 1968 Control Panel: Mechanical push-button control with main switch and emergency stop Grinding Units: Two opposing units with adjustable guide and grinding supports Machine Construction: Heavy-duty cast iron frame Condition: Used, fully functional The Malcus MC40 is a robust centerless cylindrical grinding machine made in Sweden, renowned for its reliable precision during continuous industrial operation. The machine features a solid cast iron construction which minimizes vibration and ensures consistent grinding results. Its opposing grinding and guide assemblies can be precisely adjusted, making it ideal for machining rotationally symmetrical workpieces. An integrated dressing device keeps the grinding wheel in optimum condition during use. The mechanical control panel with its clearly arranged elements enables intuitive operation of the grinding process. Designed for high stability and long service life, this machine is an excellent choice for workshops and production facilities seeking a dependable solution for centerless grinding. No guarantee is provided for the accuracy, completeness, or currency of the information given. Cedpfox Aq A Esx Ak Aeri

Condition: used, Year of construction: 1995, grinding length 600 mm grinding width max. 320 mm workpiece height max. 500 mm magnetic clamping plate 300 x 605 mm horiz. table movement: longitudinal man. max. 750 mm horizontal table movement: cross max 340 mm sanding disc diameter 355 mm table load max. 420 kg grinding wheel width 50 mm bore 127 mm spindle turning speed range 1500 U/min rapid traverse vertical 400 mm/min weight of the machine ca. 2500 kg dimensions of the machine ca. ca. 2800x2000x1800 mm Crsdpfszkv Aysx Ak Aji