Used Tooth Edges for sale (4,291)

Condition: good (used), Year of construction: 1999, machine/vehicle number: 0-200-21-3286, functionality: fully functional, input voltage: 400 V, input current: 56 A, type of input current: three-phase, edge thickness (max.): 20 mm, Equipment: CE marking, Used single-sided HOMAG edge-banding machine for straight edges – KL 79/A20/S2 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the right side. Year of Manufacture: 1999 SPEZIFICATION & EQUIPMENT: Basic machine with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness max. 60 mm - top pressure with compound V-belt, motorized height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - clamping of glue application unit before rear end of workpiece, for even glue application - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clock-wise, counter clock-wise), 2x3.5kW, jumping function GLUING SECTION A20, consisting of: - QA34 glue application unit, on request with PTFE-coating (Teflon) - Pre-melter for EVA glues - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 6 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit HL81, 2 motors, with straight/chamfer cutting function motorised fine-positioning of snipping stop - Pre-milling (rough trimming) 1,5 kW, top/bottom - Corner rounding FK13, 2 motors (top/bottom) with automatic 8-fold tool changer and several exchangeable trimming heads - Profile (radius-) scraping MN11, with auto-revolver positioning - Flat scraping (glue joint) FA10, top/bottom, (version with 3 tracer rollers) - Straight belt sanding unit KS10 - Buffing unit top/bottom ELECTRONIC CONTROL: Hfjdpfoy H Hzbjx Ad Reg - HOMATIC NC21 OPERATING SYSTEM

Condition: new, Year of construction: 2026, Edge Sander Description: Hsdpfx Adovuggze Rofg Sanding of curved materials using a side table. Simple and quick sanding belt replacement using a lever. Movable aggregate ensures horizontal and vertical operation. Additional table with adjustable height included as standard. Tensioning device ensures even sanding belt tension. Compact size of the device with a wide range of applications. Technical Data: Belt size: 2010 x 152 mm Worktable size: 790 x 221 mm Table height: 810 mm Stand height: 600 mm Additional rounding table size: 514 x 221 mm Maximum sanding length: 790 mm Dust extraction port diameter: 100 mm Edge and face sanding at an angle: 0 - 45° Belt speed: 840 m/min Motor power: 1.1 kW Power supply: 400 V Weight: 75 kg The price quoted is the net price. It does not include transportation costs

Condition: used, used, top condition Machine cleaned and lubricated Partially overhauled. Hjdpfx Adsy H N Tms Refg Emergency stop button renewed. All sliding pads replaced Motor cover repaired. Oscillation overhauled and adjusted. Test run conducted Manufacturer: SCM Samco Model: Unilev 15 Machine No.: 98510909050 Motor: 2.2 / 3 kW Oscillation: pneumatic, infinitely variable Veneer edge sanding unit Front table approx. 1400 x 220 mm Rear table approx. 1440 x 220 mm Tilting table double-sided Belt tension pneumatic Belt length 2170 mm Belt width 150 mm 2 belt speeds: 10 / 20 m/sec mobile Round edge sanding device with support table approx. 500 x 400 mm Extraction connection D 120 mm Required space approx. 1500 x 750 x 1400 mm Weight approx. 490 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee

Condition: like new (used), functionality: fully functional, empty load weight: 6,330 kg, operation weight: 7,600 kg, Year of construction: 2019, operating hours: 700 h, Tooth was hardly used. Condition like new. Hedey H D Npopfx Ad Rofg

Condition: used, Year of construction: 2017, total height: 2,100 mm, total length: 6,700 mm, total width: 1,050 mm, Weight: 3.500 kg Price: On request - Details: - └ Description: Includes Nordson unit built in 2017 - Year: 2017 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: - Number of units [pcs]: 6 - └ 1st unit type: - - Type/Brand: Nordson - - Tools available: Yes - └ 3rd unit type: Hfsdeyrpvwjpfx Ad Reg - - Tools available: Yes - Voltage [V]: 400 - Current consumption [A]: 41 - Fuse [A]: 50 - Transport dimensions: 6700mm x 1050mm x 2100mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 5 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2013, total height: 2,100 mm, total length: 9,000 mm, total width: 1,050 mm, Weight: 6.000 kg Price: On request - Details: - └ Description: Not working: Several loose sensors and the glue bin has been disassembled, machine has not yet been tested - Year: 2013 - Documentation available: No - CE certificate present: No - Serial number: - Number of units [pcs]: 9 - └ 1st unit type: - - Tools available: Yes - └ 2nd unit type: - - Type/Brand: Nordson - └ 3rd unit type: - - Tools available: Yes - └ 4th unit type: - - Tools available: No - └ 9th unit type: - - Tools available: Yes - Voltage [V]: 400 - Current consumption [A]: 69 - Fuse [A]: 80 - Transport dimensions: 9000mm x 1050mm x 2100mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 4 Financial information Hfodjyrp Uajpfx Ad Rsg VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2007, with feed unit for molded parts with hot melt glue specification Top condition cleaned, function tested, tested, trial run used, good condition Manufacturer: Artech-Biesse Type: Single Year of manufacture: 2007 Machine no.: 91009 CE type tested with automatic edge trimming, round edge banding tilt-adjustable worktable – for bevel edge banding extendable table extension with roller support feed system – steplessly adjustable edge thickness 0.4 - 3.0 mm workpiece height min. 10, max. 120 mm required space approx. 1400 mm x 1000 mm x 1600 mm weight approx. 320 kg total connected load 5.2 kW Hedpfovwgizox Ad Rofg Location 97447 Gerolzhofen, free loaded, unpacked Transfer in as-inspected condition, without warranty or guarantee.

Condition: excellent (used), functionality: fully functional, edge thickness (max.): 45 mm, total height: 1,650 mm, total length: 2,800 mm, total width: 1,220 mm, overall weight: 660 kg, Equipment: CE marking, documentation/manual, Used edge banding machine after technical inspection. - Italian production Hsdpfey Iv R Usx Ad Rofg - Not repainted - Very good condition - Used edge bander Technical parameters Equipment: - Plate - Glue tank (granulate) - Guillotine – pre-cutting of edge band - Unit for final trimming of edges with saw blade - 2 milling units for top/bottom edge processing - 2 scrapers for removing excess glue - 2 polishers - Max workpiece thickness: 45mm - Min workpiece width: 50mm - Min workpiece length: 150mm - Extraction port diameter: 60mm - Compressed air pressure: 6 bar Overall dimensions: - Length: 2800 mm - Width: 1220 mm - Height: 1650 mm - Weight: 660 kg Where can you inspect our machines? JBS MASZYNY STOLARSKIE WOLICA DRUGA 26 23-310 MODLIBORZYCE LUBELSKIE VOIVODESHIP

Condition: excellent (used), Year of construction: 1999, Manufacturer: WEGOMA Model: KS 2400 Category: Edge sanding machine Year of manufacture: 1999 Table width: 300 mm Table length: 730 mm Total units: 1 Max. sanding belt width: 150 mm Sanding belt length: 2,400 mm Main motor: 1.85 kW Sanding sleeve Round sanding support Oscillation Height adjustment: Table, manual Sanding belt tiltable: Yes Required length: 1.7 m Required width: 0.8 m Required height: 1.5 m Location: ex-stock 54634 Bitburg Hsdpfsyza Ahox Ad Rjfg - immediately available - Subject to prior sale

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor Hfodpfeb A Igpox Ad Reg -Power: 0.4 kW at 12000 rpm at 200 Hz -Power: 0.60 kW at 16500 rpm at 300 Hz -with indexable insert milling cutter -Number: 3x motors available -Price: per piece -Weight: 6 kg/piece

Operating hours: 7 h, condition: as good as new (ex-display), functionality: fully functional, Micro-stationary system for the production of a zero joint - jointless optics as if from a single casting A machining table is also available as an option - Heating time:ᐸ30Sekunden - max. edge height 65mm (option 103mm), max. edge thickness 3mm - Processing of so-called "laser edges" (co-extruded and post-coated edges, as well as old-classically pre-coated EVA hot-melt adhesive edges) - higher heat resistance and water resistance - perfectly straight, inclined, curved and round panel materials as well as moulded parts can be processed. - sloping cut surfaces of up to 55° (installation in the available table) - high process reliability & lower follow-up costs; - no glue change necessary = almost no set-up costs; - no burning of the glue; - no glue residue on the workpiece - Infinitely variable feed speed from 1 to 5.5 m/min. - continuously adjustable hot air up to 520°C - 230VoltAC, 4m connection cable, compressed air hose - 3,05kW - low air requirement, assembly compressor is sufficient The zero joint unit can be used mobile as well as micro-stationary! Optimal e.g. for larger moulded parts and for use on the construction site. For this purpose, a Systainer with an additional supply line for electricity and compressed air is included in the scope of delivery. Hfsdped St R Sefx Ad Rjg The system is also available for retrofitting in an edge banding machine (Hot air, Airtec) - please ask us

Condition: new, Year of construction: 2026, max. working width: 1350 mm workable material thickness: 0,5 - 80 mm Infinitely variable feed speed: 0,5 - 6 m / min Hfedpfx Ajygx A Nod Rog Grinding belt dimensions: 1910 x 1350 mm Sand rolling brush size: 300 x 400 mm Sandbelt line speed: 12 m / s Number of roller-brush planetary revolution shaft heads: 8 pcs. Rolling bruh rotation speed: 8-26 m / s Rolling brush public speed: 1-15 rpm machine thickness servo adjustment precision: 0,01 mm Length: 3800 mm Width: 2300 mm Height: 2400 mm Machine weight: 5500 kg Electrical connected load: 49,5 kW Standard configuration Machine configuration:1st station: Sanding belt2nd station: Brush elements Main components:PLC: SiemensTouchscreen: SiemensLow-voltage devices: SchneiderFrequency converter: SchneiderSuction fan: Elektror, Germany Total connected load:Sanding belt motor: 15 kWBrush motor: 11 kWInfeed belt motor: 4 kWVacuum suction motor: 15 kWFrequency converter for rotating brushes: 15 kW Extended machine accessories Optional feeding mode:1. Feeding with strong permanent magnet adsorption transport (suitable for steel workpieces. Workpiece size ≥ 30 mm × 30 mm)2. Feeding with vacuum negative pressure adsorption transport (suitable for stainless steel plates, copper plates, aluminum plates, etc.) that cannot be magnetically adsorbed. Workpiece size ≥ 50 mm × 50 mm)

Condition: new, Year of construction: 2024, Sanding belt size: 150 x 2280 mm Engine power: 2,2 kW Abrasive belt oscillation pneumatic belt tension Swiveling grinding unit 90 ° / 180 ° Hodpfxodq H D So Ad Rjfg Additional table on pulley

Condition: new, Year of construction: 2025, functionality: fully functional, power: 6.5 kW (8.84 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 3 mm, height adjustment type: mechanical, compressed air connection: 6 bar, plate length: 1,200 mm, product height (max.): 3 mm, tank capacity: 3 l, warranty duration: 12 months, DANIBRUM AC CONTUR 2 – Edge Banding Machine for Curved, Round, and Irregular Panels The DANIBRUM AC Contur 2 is the ideal solution for precision edge banding on panels with non-standard shapes — from oval, round, and rectangular parts to undefined curved geometries. Its operational flexibility allows edge application on 90° angles as well as open and closed arcs, thanks to an advanced mechanical feed system and adjustable profiling setup. A key advantage of this machine is its high-precision edge trimming, enabled by a laser sensor that perfectly synchronizes the edge tape ends, ensuring flawless joints with a tolerance of just ±0.3 mm. Operation is intuitive through a touch-screen interface that allows fast adjustment of all working parameters. The system features a vacuum-supported mobile arm, extendable up to 2250 mm, providing reliable and stable support for the workpiece during processing. For safe and efficient use, the machine is equipped with a foot pedal control system, while the adjustable feed speed enables edge banding at 0 to 30 cm/s and longitudinal profiling at 0 to 24 cm/s. Optimized for Complex Workpieces This machine is designed to handle: Edge tape thickness: 0.5 – 3 mm Panel thickness: 12 – 60 mm Minimum working radius: 20 mm Compatible with various panel formats: Round pieces up to Ø2400 mm Hjdpewg E Hvofx Ad Rjfg Rectangular panels: 1200 x 2400 mm L-shaped panels: 1400 x 1600 mm Equipped with high-speed longitudinal profiling cutters (24,000 rpm), it guarantees a high-quality finish even on complex contours. The AC Contur series includes multiple models, such as AC Contur 2 and AC Contur 3, the latter featuring two extendable arms for increased productivity. Technical Specifications Edge tape thickness: 0.5 – 3 mm Minimum working radius: 20 mm Panel thickness: 12 – 60 mm Material dimensions: Round: Ø2400 mm Rectangular: 1200 x 2400 mm L-shape: 1400 x 1600 mm Cutter speed (longitudinal profiling): 24,000 rpm Feed speed: Edge banding: 0 – 30 cm/s Profiling: 0 – 24 cm/s Edge tape joint accuracy: ±0.3 mm Compressed air pressure: 0.6 – 0.8 Mpa Working temperature: 110 – 210°C Adhesive tank capacity: 2.6 liters Arm extension length: 2250 mm Installed power: 6.5 kW Power supply: 400 V – 3 Phase – 50 Hz Weight: 430 kg Overall dimensions: 1870 x 1400 x 1530 mm

Condition: good (used), Year of construction: 1990, Edge or gluing press 5 vertical pistons 3 hold-down clamps External dimension: 3700 mm Hodpfxoyxyh Eo Ad Rofg External height: 2480 mm Available from location 57319 Bad Berleburg

Condition: new, Year of construction: 2025, the SQUALO 615 multi-blade or multi-blade circular saw with single shaft is a technological machine, indispensable in a modern sawmill to optimize the production of sawn timber. moreover it is 2-in-1 as it can be configured as a trimming machine with 1 or more movable blades. ideal for the production of strips, squares, sawn timber, profiles, edged planks, prisms, boards, elements for pallets. Rollers / conveyor belt width 620 mm Width of infeed / outfeed conveyor rollers 620/720 mm Max saw unit width 590 mm Max cutting height (without pad) mm 150 (mm 125 Trimming machine) Min. Length working mm 800 Max width passage 800 mm Blades hole diameter mm 80 (mm 104 Trimming machine) Circular blades diameter 250/470 mm (480 mm Trimming machine) Blade shaft speed rpm 3.800 Hfedpfjhpbxijx Ad Rog Variable feed speed with ROLLS 3 - 36 m / min Variable feed speed with CARPET m / min 4 - 25 optional: softstarter start

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Features and technical data: Hsdpowka Iisfx Ad Refg - Machine completely overhauled: - New Glue Jet 301 glue application system (top part 1 mm) - All units inspected - All milling cutters resharpened - All knives replaced - Feed speed: 10 - 18 m/min - Workpiece length: min. 160 mm - Workpiece width: min. 60 mm - Workpiece thickness: 8 - 60 mm - Edge thickness: 0.4 - 8 mm - Electrically adjustable feed motor: 400 V / 50 Hz, 2.2 kW - Motorized pressure bridge adjustment - Automatic chain lubrication - PPC 315 control with 15" touchscreen - ECO MODE energy saving function - Infeed fence 1350 mm, motorized adjustment - Jointing unit 1802: - 2 x 2.0 kW, 200 Hz, 12,000 rpm with 2 jointing units for panel edge jointing - Diamond cutter, Ø 70 x 64 x 30 mm, Z2, left rotation for jointing unit - Diamond cutter, Ø 70 x 64 x 30 mm, Z2, right rotation for jointing unit - Edge feeder 1901 fully automatic - Glue application station Glu Jet GJ301 automatic: - 2.3 kW; 50 Hz - Granulate hopper - Pressure unit 1913 MOT - End trimming unit 1918 (60 mm) pneumatic - Multifunctional milling unit 1826 MOT4 (2 x 0.65 kW): - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm left rotation - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm right rotation - Profile milling unit 1833 MOT4: - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 Radius R = 2.5 mm, left rotation with CM technology - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 Radius R = 2.5 mm, right rotation with CM technology - Scraper unit 1929 MOT2: - Carbide reversible knives for scraper holder R = 2.5 mm (2 pcs. required) - Flat scraper 1964 - Buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) Availability: short-term Location: 63934 Röllbach

Condition: good (used), Radii from 2 mm to 12.5 mm. Expandable up to 25 mm. 45° bevels up to 16 mm wide. Workpiece support extendable up to 380 mm. Optional feed system available. You will receive an invoice with VAT shown separately. Price applies ex stock Haldensleben. Hfsdpfjw Sw Syex Ad Rjg

Condition: used, Knapp transfer roller conveyor Toothed belt slider 90° 900-485-425 RA1876 Make: Knapp Running direction: both directions Roller width (RB): 425 mm Nominal/outer width (NB): 485 mm Length: 900 mm Roller diameter: 50 mm Roller distance: 75 mm Motor overslide belts: SEW-Motor 3x 300-500V 0,25 kW Motor Roller conveyors: Interroll EC300 24V Height frame: 170 mm Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Pneumatic end stop and pneumatic lifting of the transfer belt Scope of delivery: without supports Optionally available: Supports Side guide one and both sides Condition: functional and visually good condition For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Hfodpfx Adok Abixj Rog Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2007, Gebhardt timing belt pusher straight + 90° right 200-550-100 Year of manufacture: 2007 Machine number: 1070.113 POS. 013.10 354.21 Max. Weight: 30 kg Design: built in 2 cars (parallel running, B = 610 mm) driven roller conveyor feeder railway L = 2, 0 m, optionally up to 10 m expandable Conveyor roller conveyor without drive L = 1, 70 m, on demand expandable with drive up to 5m conveyor width: 550 mm Excavation: 15 mm Conveyor speed: v = 0.35 m/sec. Support roller pitch: 100 mm Drive: Motor type WA20DT71D4BMG/IS Power: 0, 37kW Speed: 96 Design 7 shaft: hollow shaft 20 mm Voltage: 230/400 V Current: 1,25 A Transportzmasze: L x B x H = 2,05 x 1.70 x 0.70 m Weight: 230 kg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik Hjdpfxjk Aa Hco Ad Rsfg

Condition: used, Knapp transfer roller conveyor Toothed belt slider 90° 750-510-450 RA1875 Make: Knapp Running direction: both directions Roller width (RB): 450 mm Nominal/outer width (NB): 510 mm Length: 750 mm Hjdpfx Adjk Abiuj Rofg Roller diameter: 50 mm Roller distance: 55 & 90 mm Angle between roller conveyors: 15° Motor overslide belts: SEW-Motor 3x 300-500V Motor Roller conveyors: Interroll EC300 24V Height frame: 420 mm Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Scope of delivery: without supports Optionally available: Supports Side guide one and both sides Condition: functional and visually good condition For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Knapp transfer roller conveyor Toothed belt slider 90° 525-690-625 RA1890 Make: Knapp Running direction: both directions Roller width (RB): 625 mm Nominal/outer width (NB): 690 mm Length: 525 mm Roller diameter: 50 mm Roller distance: 75 mm Motor overslide belts: SEW-Motor 3x 300-500V 0,25 kW Motor Roller conveyors: Interroll EC300 24V Height frame: 170 mm Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Pneumatic lifting of the transfer belt Scope of delivery: without supports Optionally available: Supports Side guide one and both sides Condition: functional and visually good condition For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. Hfodpsr R D Acsfx Ad Rjg With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Knapp transfer roller conveyor Toothed belt slider 90° 675-690-625 RA1891 Make: Knapp Running direction: both directions Roller width (RB): 625 mm Hfsdpfx Ask Abi Rsd Rsg Nominal/outer width (NB): 690 mm Length: 675 mm Roller diameter: 50 mm Roller distance: 75 mm Motor overslide belts: SEW-Motor 3x 300-500V 0,25 kW Motor Roller conveyors: Interroll EC300 24V Height frame: 170 mm Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Pneumatic lifting of the transfer belt Scope of delivery: without supports including end stop Optionally available: Supports Side guide one and both sides Condition: functional and visually good condition For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Knapp transfer roller conveyor Toothed belt slider 90° 750-485-425 RA1856 Make: Knapp Running direction: both directions Roller width (RB): 425 mm Nominal/outer width (NB): 485 mm Length: 750 mm Distance between the roller conveyors: 95 mm Distance between the overslide belts: 400 mm Roller diameter: 50 mm Roller distance: 75 mm Motor overslide belts: SEW-Motor 3x 300-500V Motor Roller conveyors: Interroll EC300 24V Height frame: 245 mm Currently set high: 620 mm Pneumatic overslide belts Pneumatic end stop Hfodpfx Adsk Abhwo Rsg Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Optionally available: Side guide one and both sides For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Knapp transfer roller conveyor Toothed belt slider 90° 900-485-425 RA1893 Make: Knapp Running direction: both directions Roller width (RB): 425 mm Nominal/outer width (NB): 485 mm Length: 900 mm Hjdek Abi Uopfx Ad Rsfg Roller diameter: 50 mm Roller distance: 75 mm Motor overslide belts: SEW-Motor 3x 300-500V Motor Roller conveyors: Interroll EC300 24V Height frame: 275 mm inkluding Pneumatic overslide belts and end stop Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Optionally available: Supports Side guide one and both sides For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics