Used Solid for sale (3,433)

Condition: used, Tires, solid rubber tires, forklift tires, complete wheels -Handover: in current condition as viewed -Tire condition: see photos -Manufacturer: Master Solid, solid rubber tires type Super Elastic 2 pieces -Tire size: 6.50-10 RIM 5.00F-10 -Bolt circle: Ø 150 x 13 mm Rcjdpfx Ajututcjmtjf -Recess: Ø 120 mm -Price/Delivery: complete -Dimensions each: Ø 570 x 160 mm -Weight: 48 kg/piece

Condition: good (used), Drilling machine, drill press, pillar drill, column drill -Manufacturer: Solid, column drill type SHW 30 -Motor power: 1.1 kW -Speed speeds: 70 - 1980 rpm, 7 levels -Table size: 270 x 270 mm, travel 630 mm -Clamping table: pivotable on vice device -Spindle holder: MK3 with drill chuck -Spindle stroke: 120 mm -Throat: 280 mm -Column Ø: 110 mm Redpsqxvxlsfx Amtjcf -Accessories: including foot control -Dimensions: 860/640/H1850 mm -Weight: 273 kg

Condition: ready for operation (used), Drill diameter: 16 mm Spindle mount: MK 3 Overhang: 240 mm Quill travel: 100 mm Rjdszh H Nxspfx Amtecf Spindle speeds, infinitely variable via pole-change motor and 2 groups: 250 - 4000 rpm Drive motor: 380 V, approx. 1/1.3 kW Approximate footprint: 2200 x 620 x total 1770 mm Approximate weight: 280 kg

Condition: like new (used), Year of construction: 2007, power: 5.5 kW (7.48 HP), For sale is a Solid Air piston compressor (2-cylinder version, 5.5 kW, 2007) in excellent, technically flawless condition – including a matching 500 L compressed air tank (2007). Rcjdpfjzlhp Ujx Amtef A special feature of this compressor: it was used exclusively as an emergency unit, so it has hardly been run. Accordingly, it has very few operating hours and is in almost new condition, both technically and visually. The compressor has always been regularly serviced, is fully functional, has been inspected, and is ready for immediate use. The included 500 L compressed air tank ensures a consistent, pressure-stable air supply and, by reducing the number of switching cycles, also protects the compressor. Technical data: - Type: Piston compressor, 2-cylinder - Motor power: 5.5 kW - Compression pressure: 10 bar - Displacement flow rate: 916 l/min - Operating speed: 850 min⁻¹ - Compressed air tank: 500 L (included) - Operating hours: very low (used only as an emergency unit) With our comprehensive all-inclusive package, we will personally take care of the complete service for you – from delivery to the commissioning of your new compressor. This includes unloading, setting up, and aligning the system. Our experienced service technicians will then professionally commission the system, carry out all necessary functional tests, and ensure that your Solid Air compressor, together with the 500 L tank, runs reliably and efficiently. In addition, we offer individual training for your employees so that you can use the system optimally from the start. We will also continue to be available to you after installation – whether for maintenance, technical questions, or future expansions. With our comprehensive all-inclusive package, you don't have to worry about anything – we will ensure that everything runs smoothly and that you can focus entirely on your production. Our service promise: Quality, competence, and customer satisfaction are our top priorities. Our team consists of qualified and experienced technicians who specialize in compressed air and compressor systems, as well as other machines. We place great value on personal support and will be happy to assist you at any time, even after the purchase. In addition, you have the opportunity to inspect and test the system at any time in our workshop. You are cordially invited to come and see the condition and operation of the system for yourself. You are in the best hands with us – professional, reliable, and with a passion for machines! PS CNC Service Germany GmbH & Co. KG All information is subject to change without notice.

Condition: good (used), 1 x bench drilling machine Solid TB 16 in technically good condition. Rcjdpfowyw Apex Amtjf Technical data: Mount: MK 2 Speeds: 200 - 3200 rpm Table clamping surface: 260 x 330 mm Accessories: Quick-action chuck 1 - 13 mm Drift key The machine can be inspected under power.

Condition: used, Year of construction: 1998, Technical details: Rsdsu Idutspfx Amtjcf bore capacity in steel (diameter): 15 mm bore stroke: 100 mm threading: M16 number of drilling stations: 3 drill spindle - Morse Taper: 3x MK2 spindle throat: 220 mm spindle distance: 335 mm headstock adjustment: (vertikal) 290 manuell mm feed:: mauell mm/U spindle speed:: 220-1600 / 400-3200 / 800-6400 U/min distance between table/spindle: min./max.: 235/525 mm table surface area: 1270 x 315 mm table adjustment: fest / fix mm total power requirement: nicht bekannt kW weight of the machine ca.: 0,72 t dimension machine xH: 1,4 x 0,8 x 2,25 m incl. cooling water system operation by hand and foot The drilling spindles are equipped as follows: 1x drill chuck 13mm 2x quick chuck 10mm *

Year of construction: 1965, condition: used, Drilling diameter 30 mm total power requirement 0,74 kW Machine weight approx. 0.35 t drilling capacity in steel (diameter) 30 mm throat 300 mm drilling stroke 120 mm mounting MK 3 table surface 335 x 280 mm groove width 14 mm table adjustable in height 510 mm distance spindle/table max. 120 - 630 mm Rjdpjm Sg Tbofx Amtocf column base area 380 x 400 mm distance spindle / base plate 1160 mm Speed range - drilling 200 - 2500 rpm speed steps working spindle 4 column diameter 100 mm machined base plate: Yes table rotation approx. 180 ° space requirement approx. 0,9 x 0,4 x 1,9 m Control conventional

Year of construction: 1998, condition: good (used), Robust Tool Grinding Machine DS CDN Tool grinding machine, grinding machine, angle grinding machine, lathe tool grinding machine, steel grinding machine - 4 grinding stations - 3 angular tables on oscillating tables - 1 vise for chip-breaking groove - max. steel cross-section mm - Dimensions 1000/1100/H1500 mm - Weight 336 kg Rcodpfx Amjdzdumotof

Condition: used, Year of construction: 1990, ja vice 1 quill stroke ja 2.000 mm weight of the machine ca. 790 kg +++++ Rjdpfxefym Hue Amtscf Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: like new (used), - TOPSOLID’PDM SERVER license - TOPSOLID’DESIGN PRO license with USB dongle - TOPSOLID’DESIGN PRO + CAM M2 + PP HAAS – FANUC license with USB dongle Rcsdpfx Amezbyb Notsf

Condition: used, Motor with 3 speeds cleaned, function tested, trial run used Make: Solid Type: B 16 Machine no.: 532377 Morse taper spindle Drill chuck: keyless/keyed 2 x keyless x keyed Throat depth: 250 mm Spindle stroke: 100 mm 21 speed steps from 200-2800 Motor: 3 speeds Lighting Rodpfx Aew En H Aomtecf Table size: 330 mm x 330 mm Machine vice Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition No warranty or guarantee

Condition: good (used), Tires, solid rubber tires, forklift tires, complete wheels -Manufacturer: Vorwerk Rota, solid rubber tires, 2 pieces -Tire size: 23x9-10 (225/75-10) RIM 6.50 F-10 -Bolt circle: Ø 160 x 20 mm -Recess: Ø 110 mm -Price/Fee: complete Rcjdjv Df T Eepfx Amtsf -Dimensions each: Ø 550 x 215 mm -Weight: 58 kg/piece

Condition: good (used), Tires, solid rubber tires, forklift tires -Manufacturer: Rigdon, solid rubber tire SE 90 with rim -Tire size: 16x6-8 -Rim: 33R-8 Rsdpfjv Df Txjx Amtocf -Bolt circle: Ø 145 x 18 mm -Recess: Ø 110 mm Quantity: 1 piece available -Dimensions each: Ø 380 x 165 mm -Weight: 20 kg

Condition: good (used), Tires, solid rubber tires, forklift tires, complete wheels -Manufacturer: Bergougnan, solid rubber tire with rim Rcjdev Df Trspfx Amtsf -Tire size: 18x7-8 -Bolt circle: Ø 145 x 18 mm -Recess: Ø 110 mm Quantity: 1 piece available -Dimensions: Ø 430 x 160 mm -Weight: 30 kg

Condition: used, Year of construction: 2007, Heating plate press Rcsdpfx Aezuzxnemtof Manufacturer: OTT Type: Solid 16-32 Year of manufacture: 2007 Technical data Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2001, - Cutting length: 5800 mm - Cutting width: 2 x 2200 mm - Max. cutting height: 100 mm Panel dividing and solid wood saw Manufacturer: PANHANS Type: EURO 32 Year of manufacture: 2001 Dimensions: - Cutting length: 5800 mm - Cutting width: 2 x 2200 mm - Max. cutting height: 100 mm Machine attachments: - Roller table at the rear: 3982 mm - Support beam at the rear: 9 pieces, 40 x 4056 mm - Air cushion table at the front: 2 pieces, 600 x 1800 mm, adjustable Air cushion table at the front for miter cutting device: 1 piece, 600 x 1400 mm Rodozuy Egepfx Amtecf - Air cushion miter table: 600 x 1800 mm, left - Miter ruler: up to 2060 mm - Clamps: 9 pieces, adjustable - Stop jaws: 2 pieces, adjustable - Side pressure: 65-1365 mm, stepless Special accessories: automatic miter cutting device - Special version: hydraulic lifting table with roller conveyor, infeed roller conveyor, 4 length edgers, 4 panel extractors Note: The technical data and descriptions are copies of the order confirmation from that time. The information is provided for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 2008, I sell the press for glulam glued massive wood LISY DVORAK TH6, year 2008. Redpfx Amjkd Drhetecf Material size 3000 X 1250 x 50mm 6 working areas, manual rotation. 6 pcs hydraulic cross pressures per 1 area / pomp 1,1 KW 6 pcs manual pressures per 1 area Self weight 1200kg. Very good condition. Available immediately.

Condition: new, JLT Clamp Rack Systems For Solid Wood Edge & Face Laminating A rugged and versatile clamping system specifically designed for solid wood edge and face laminating of both hard woods and softwoods. Available in two standard sizes, the Clamp Rack (or Panel Clamp) is ideal for the production of components such as panels, joinery sections, stair components,worktops, block gluings, and table tops etc. Frames can also be clamped. The patented equalizer clamp arms incorporate a number of important features not found on other types of mechanical clamp that help ensure a quality glue joint is produced. They can be positioned anywhere on the frame being easily moved from side to side / row to row. When not in use they can be hung vertically from a top support bar thus saving valuable workshop space. For face laminating material up to 150mm (6") in thickness optional rocker plates can be supplied which easily slide over the top and bottom clamp jaws thus evenly distributing the clamping pressure. When using the 401 type clamp and rocker plates material up to 200mm (8") can be laminated. Standard max. opening of the clamp arm is 1020mm (40") although larger sizes are available on request Rodpfxsb Evnke Amtscf

Condition: good (used), functionality: fully functional, For sale is a robust lathe/woodturning lathe for processing wooden workpieces. The machine features a stable machine bed design, an adjustable tailstock, and an M33 spindle mount. With a center distance of 1,000 mm and a center height of 180 mm, the machine is suitable for various turning operations and longer workpieces. Technical data: Overall length: approx. 1,520 mm Overall width: approx. 520 mm Center distance: approx. 1,000 mm Center height: approx. 180 mm Spindle mount: M33 Speeds: 1,000 / 1,700 / 2,700 rpm Motor power: 0.9 kW Voltage: 240 V Rcedpfx Amozl D Rnstsf Weight: approx. 45 kg Adjustable tailstock Tailstock with quill and handwheel Belt drive Stable machine bed design Used machine with signs of wear and tear consistent with age and use. The condition can be seen in the photos. Inspection and test run possible by appointment. Transport possible for an additional charge! The machine will be inspected before sale. Due to the age of the used machine, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sales and changes are subject to change. All information without guarantee.

Condition: good (used), Tires, solid rubber tires, forklift tires, complete wheels Rodpfsziz A Asx Amtjcf -Manufacturer: Watts, Premia solid rubber tires with rim (2 pieces) -Tire size: 18x7-8 -Bolt circle: Ø 144 x 19 mm -Hub bore: Ø 110 mm -Submission/Price: complete -Dimensions: Ø 435 x 145 mm -Weight: 25.2 kg/pc.

Condition: used, Tires, solid rubber tires, forklift tires, complete wheels -Manufacturer: Ecomatic, solid rubber tires with rim, 2 pieces -Tire size: 7.00-12 RIM 5.00 S-12 -Bolt circle: Ø 190 x 27 mm -Hub bore: Ø 145 mm -Submission/Price: complete Rsdpfx Amsziyqletjcf -Dimensions: Ø 600 x 180 mm -Weight: 50.6 kg/pc.

Condition: used, Tires, solid rubber tires, forklift tires, complete wheels Rjdpfxjziyibo Amtocf -Manufacturer: Solideal, Magnum solid rubber tires with rim (2 pieces) -Tire size: 6.00-9 -Bolt circle: Ø 180 x 17 mm -Hub bore: Ø 140 mm -Submission/Price: complete -Dimensions: Ø 445 x 137 mm -Weight: 24.8 kg/pc.

Condition: used, Trumpf TRUMPF TruDisk 4002 (4 C) High-Performance Solid-State Disk Laser with up to 4 kW Output Type: TruDisk 4002 (4 C) The TruDisk 4002 is a powerful, energy-efficient, and modular laser solution – ideal for industrial manufacturing environments with demanding requirements for quality, precision, and automation. The combination of high power, excellent beam quality, and smart factory features makes it particularly attractive for modern production lines. System type: TruDisk 4002 (4C) Manufacturer: TRUMPF Laser GmbH + Co. KG Year of manufacture: May 2012 Drawing number: 20-10-02-A3* No additional tests were carried out in-house. Operating hours could not be read out. The laser operated flawlessly until decommissioning. Technical features: Output & wavelength: 80–4000 W at 1030 nm Beam quality (BPP): typically 2 mm·mrad (up to 25 mm·mrad, depending on configuration) Modular & compact: footprint < 1 m², modular design simplifies maintenance/service Efficient energy & cooling systems: energy-saving modes, active power factor correction, pulse function to reduce consumption Flexible cooling: integrated heat exchanger (5–28 °C), optional with compressor (up to 38 °C inlet temperature) Reflection-resistant: special resonator design also suitable for highly reflective metals Industry 4.0 capable: extensive sensor technology and data interfaces for condition monitoring, OPC UA, predictive maintenance Application areas: Scanner & hybrid welding (e.g. automotive body manufacturing, shipbuilding) High-speed cutting, including on reflective metals Flame cutting & surface processing Laser cladding, hardening, deep penetration welding where high precision is required Technical data: Supply voltage: 380 V (-10%) to 460 V (+10%), 3AC + PE Rcedpfx Amjzii Nqstsf Frequency: 50 – 60 Hz Power consumption: 23 kW / 25 kVA Rated current: 34 A at 400 V Protection rating: IP 54 Short-circuit strength: Icn / SCCR 50 kA Weight: 850 kg Condition: used Scope of delivery: (See picture) (Specifications subject to change and errors excepted!) We would be happy to answer any further questions by phone.

Condition: good (used), Tires, solid rubber tires, forklift tires -Manufacturer: Continental, solid rubber tires CSE-Robust SC 15 from GSL aerial work platform -Tire size: 5.00-8/3.00 -Bolt circle: Ø 110 x 15 mm Rjdpfx Asizk Rhjmtscf -Inner diameter: 67 mm -Quantity: 1 piece -Dimensions: Ø 460 x 125 mm -Weight: 20 kg

Condition: used, Tires, solid rubber tires, forklift tires, complete wheels, tires with rims, trailer tires, heavy-duty tires, heavy-duty wheels Rcodpjv A Thzsfx Amtof -Manufacturer: Ecotrack, solid rubber tires 2 pieces with rim -Tire size: 7.00-12 RIM 5.00 S -12 -Rim: bolt circle Ø 220 x 32 mm -Recess: Ø 170 mm -Dimensions each: Ø 610 x 180 mm -Weight: 53 kg/piece