Used Operational Task for sale (25,410)

Condition: ready for operation (used), Servowatt DCP 130 / 30CX Operational Amplifier SN:87401-30, used, normal signs of use, 100% functional, scope of delivery as per photos Gsdpei Ec Tysfx Ag Tsil

Condition: good (used), functionality: fully functional, Year of construction: 2016, operating hours: 500 h, Bunker dosing belt by R&T Recycling Technik Year of manufacture: 2016 Capacity: 2.5 m³ Drive: 1.5 kW Frequency-controlled feed belt Gijdpfsxcuviox Ag Tjl This system was integrated into a small pilot plant for approximately 3 months in 2016. The unit is in excellent condition and ready for operation. As shown in photo no. ..., this unit can be transported on a large tandem car trailer.

Condition: good (used), machine/vehicle number: 8607719 / 8412427, Equipment: rotational speed infinitely variable, 2x OZAKI lathes Godpfexg R Nyex Ag Tsil - 1x in working order; OSL-III 8607719 - 1x defective (for spare parts); OSL-III No. 8412427

Condition: used, Machine not operational, control system does not start Horizontal Machining Center with Pallet Changer STEINEL Type BZ 24 FFZ with CNC Control SIEMENS Sinumerik 850 M Gijdpfjdzqmfsx Ag Tel Serial No. 58 Year of manufacture 1990 Travels X: 630 mm, Y: 500 mm, Z: 500 mm Table size per pallet 400 x 400 mm Pallet rotation B-axis Spindle speed max. 7100 rpm, infinitely variable Tool holder ISO 40 Power supply 380 Volt, 50 Hz, 80 Amp. - Tool changer with 60 tool positions and double-arm gripper - Pallet changer with 4 pallets - Horizontally positioned pallet station for machining, axis movement = X-axis - Pallet rotation = B-axis - Ram spindle as Z-axis - Ram spindle with cross movement as Y-axis - Coolant spray nozzles on the ram spindle and in the work area - Coolant system with chip conveyor beneath the work area - CNC Control SIEMENS Sinumerik 850 M with TFT monitor - Interface for data transfer Space requirement (L x W x H) 9000 x 3100 x 3200 mm Weight 13.5 tons Machine not operational, control system does not start – otherwise in good condition Transport dimensions: Machine with tool magazine L x W x H 9000 x 3000 x 3000 mm Chip conveyor L x W x H 4700 x 1000 x 1450 mm

Condition: new, functionality: fully functional, With this offer, you are purchasing a new Kyocera TaskAlfa 8353ci colour multifunctional system. Item for sale: 1 x Kyocera TaskAlfa 8353ci with the following features: Includes original packaging. Giodexrbrcopfx Ag Tjl Condition: This offer is for a new device that has not yet been used. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment to do so! Seaworthy packaging and worldwide shipping available on request! For more information, please feel free to contact us personally.

Condition: excellent (used), Year of construction: 2005, load capacity: 5,000 kg, Self-supporting, braked rotating device for jig construction, tool making for assembly, welding, painting, etc. with foot-operated remote control, right/left switchable Godpohtrp Iofx Ag Toil with speed control upon request, surcharge €400 when working with warning light Machine is technically in new condition, almost unused Dimensions: Height to axle center 1000mm Mounting plate 400 x 400 mm Hole spacing approx. 240 x 240 mm External dimensions of box section 1000mm x 850mm More machines of this type in various sizes are in stock. Load capacity up to 5000 kg New machine price over €20,000

Condition: good (used), Manufacturer: Taski Giedpehzrbgsfx Ag Tol Tip: CO 700 BMS Works! Battery is not good! Without scrubber!

Condition: used, functionality: fully functional, TASKI Swingo CO755 Automatic Cleaner and Scrubber-Dryer (internal article no. REI_001) Name: TASKI Swingo Drive: ELECTRIC Giedpjwlq Ebofx Ag Tjl Hand-held Condition: see photos / good condition Manufacturer: TASKI Model: Swingo CO755 Electric-operated 24 V 600 W 100-240 V 50-60 Hz 300 W Max. 155 kg Year of manufacture Integrated charger Fully charged battery Self-propelled forward and reverse Charging current: 240 Scrub brush missing Price quoted upon pickup from warehouse 47441 Moers Various cleaners and scrubber-dryers in stock We offer as shown. Inspection is expressly offered. General: We offer various items here, which we describe as best as possible and provide informative photos. Further information about the item cannot be provided. We offer viewings on Tuesdays and Thursdays between 9 a.m. and 4 p.m. by appointment by phone. The item can be picked up immediately if required. Due to time constraints, we can only offer answers to this question if you provide us with a telephone number with your inquiry. Unless expressly stated, this item is USED. We offer it as shown. All items are ex warehouse, 47441 Moers. If you require shipping, please contact us to discuss packaging and shipping costs. (Shipping costs are approximately €150 net, depending on distance.) All dimensions are approximate.

Condition: reconditioned (used), functionality: fully functional, working width: 430 mm, overall weight: 48 kg, warranty duration: 12 months, input voltage: 230 V, TASKI ERGODISC DUO SINGLE DISC SCRUBBER Two operating modes: 165 RPM and 330 RPM The 430mm cleaning head is equipped with a new, medium-hard disc brush, allowing for work on any surface. The advantages of single-disc machines powered by 230V include a simple design, low operating costs, and reliability. High maneuverability thanks to their compact size. The centrally located, powerful motor ensures uniform pressure and significantly simplifies operation. Perfect for small spaces where easy maneuverability is essential. This makes the machine suitable for use in places such as car showrooms, boutiques, museums, hotels, restaurants, offices, public buildings, and many others. You are purchasing the exact machine you see in the photos. Other models are available in our other auctions, which we encourage you to check out. TECHNICAL DATA: Power supply (V): 230 Working width (mm): 430 Rotation speed (rpm/min): 165 / 330 Giedjxx T A Hopfx Ag Tel Power consumption (W): 1100 Weight (kg): 48 Cable length (m): 15 INCLUDED: NEW 430mm PPL 0.5 disc brush 5 liters of TENZI NORMAL fluid - FREE KEY FEATURES: Thanks to its design, the machine is highly maneuverable. The small turning radius allows operation even in narrow passages and alleys. The large working width (430mm) ensures high surface coverage. The control panel is very easy to read and use.

Condition: used, Meet the Taski Swingo 2100, your perfect solution for spotless floors. This compact ride-on scrubber dryer combines maneuverability with powerful performance. With its narrow width of just 58 cm, you can easily navigate through doors, corridors, and elevators—ideal for schools, healthcare facilities, and retail environments. The Swingo 2100 is equipped with two disc brushes (ø28 cm) and a working width of 55 cm, enabling you to clean up to 3,025 m² per hour. Large clean and dirty water tanks of 75 liters allow for prolonged, uninterrupted operation, with a working time of 3.5 hours—ample for medium-sized areas. A robust brush pressure of 54 kg lets you tackle even stubborn dirt with ease, yet the machine remains remarkably quiet at under 70 dB(A). Standard safety and comfort features include an intuitive control panel, anti-slip wheels, and stable handling. The Taski Swingo 2100 is engineered for ease of use: simple maintenance, rapid charging thanks to the optional onboard charger, and always ready for the next job. Technical specifications: Godpfjwzvc Rex Ag Tjil - Brand: Taski - Model: Swingo 2100 - Ride-on or walk-behind: Ride-on - Theoretical capacity: 3,025 m²/h - Scrubbing width: 55 cm - Squeegee width: 63 cm - Battery run time: 3.5 hours - Clean water tank capacity: 75 liters - Dirty water tank capacity: 75 liters - Number of brushes: 2 - Brush type: Disc - Brush diameter: 28 cm - Power source: 24V - Maximum speed: 5.5 km/h - Brush pressure: 54 kg - Sound level:

Condition: used, TASKI Swingo CO955 Automatic Cleaner and Scrubber-Dryer (internal article no. REI_002) Name: TASKI Swingo Hand-held Condition: see photos / very good condition Manufacturer: TASKI Model: Swingo CO955 Electric-operated 24 V 1000 W 100-240 V 300 W Charging current: 240 V Max. 179 kg Year of manufacture Integrated charger Fully charged battery Self-propelled forward and reverse 2 disc brushes Price quoted upon pickup from the warehouse in 47441 Moers NEW PRICE: approx. €13,500 Various cleaners and scrubber-dryers in stock We offer as shown. Inspection is expressly offered. General: Giodpfx Agjwlq I Ae Tol We offer various items here, which we describe as best as possible and provide informative photos. Further information about the item cannot be provided. We offer viewings on Tuesdays and Thursdays between 9 a.m. and 4 p.m. by appointment by phone. The item can be picked up immediately if required. Due to time constraints, we can only offer answers to this question if you provide us with a telephone number with your inquiry. Unless expressly stated, this item is USED. We offer it as shown. All items are ex warehouse, 47441 Moers. If you require shipping, please contact us to discuss packaging and shipping costs. (Shipping costs are approximately €150 net, depending on distance.) All dimensions are approximate.

Condition: reconditioned (used), functionality: fully functional, working width: 430 mm, overall weight: 48 kg, warranty duration: 12 months, input voltage: 230 V, TASKI ERGODISC DUO SINGLE DISC SCRUBBER Two operating modes: 165 RPM and 330 RPM The 430mm cleaning head is equipped with a new, medium-hard disc brush, allowing for work on any surface. The advantages of single-disc machines powered by 230V include a simple design, low operating costs, and reliability. High maneuverability thanks to their compact size. The centrally located, powerful motor ensures uniform pressure and significantly simplifies operation. Perfect for small spaces where easy maneuverability is essential. This makes the machine suitable for use in places such as car showrooms, boutiques, museums, hotels, restaurants, offices, public buildings, and many others. You are purchasing the exact machine you see in the photos. Other models are available in our other auctions, which we encourage you to check out. TECHNICAL DATA: Power supply (V): 230 Gsdsxx Tk Dspfx Ag Teil Working width (mm): 430 Rotation speed (rpm/min): 165 / 330 Power consumption (W): 1100 Weight (kg): 48 Cable length (m): 15 INCLUDED: NEW 430mm PPL 0.5 disc brush 5 liters of TENZI NORMAL fluid - FREE KEY FEATURES: Thanks to its design, the machine is highly maneuverable. The small turning radius allows operation even in narrow passages and alleys. The large working width (430mm) ensures high surface coverage. The control panel is very easy to read and use.

Condition: used, With an impressive 85 cm working width and maneuverability as its trademark, the Taski Swingo 4000 maneuvers smoothly through any space, be it offices, warehouses or production halls. The two 43 cm disc brushes ensure thorough cleaning, supported by an adjustable brush pressure of 56 to 112 kg. Giedouqk Dfepfx Ag Tel This powerful scrubber is designed with you in mind, with a 200-liter fresh water tank and an impressive work time of approximately 5 hours. ECO mode optimizes performance, while safety features such as an emergency stop, anti-skid wheels and an automatic parking brake ensure your peace of mind. User-friendliness is at the heart of the Taski Swingo 4000. In addition to its intuitive operation, it offers easy maintenance and a comfortable operator's seat. So, whether you are a seasoned professional or new to the world of cleaning technology, this scrubber will adapt to your needs. Transform your cleaning routine with the Taski Swingo 4000 - the ideal blend of power, precision and ease of use. Other specifications: - Working capacity: 4,500 m²/h, - Battery working time: 3 hours, - Scrubbing width: 75 cm, - Mopping width: 99 cm, - Clean water tank capacity: 110 liters, - Holding tank capacity: 125 liters, - Number of disc brushes: 2 (Ø39 cm), - Power source: Battery 24V, - Maximum speed: 6 km/h, - Brush pressure: 30 - 60 kg, - Traction on: Front wheel, - Noise level: < 70 dB (A), - Weight (excluding batteries): 225 kg, - Weight (incl. batteries): 381 kg, - Dimensions: 149.5 x 77 x 132 cm, Would you like to know more about the Taski Swingo 4000? Then contact us, we would be happy to tell you more about it!

Condition: reconditioned (used), Year of construction: 2021, functionality: fully functional, working width: 380 mm, area performance: 1,140 m²/h, overall weight: 67 kg, warranty duration: 12 months, water tank capacity: 10 l, TASKI SWINGO 350 SCRUBBER NEW 12V 25Ah SONNENSCHEIN GEL BATTERIES (2x) 2021 production year 380mm cleaning head equipped with a medium-hardness roller brush, allowing work on any surface. New polyurethane astringent rubbers, resistant to contact with oil liquids, greases and petroleum derivatives. Built-in battery charger makes everyday use easier Gijdpjwmcuqsfx Ag Tol A powerful suction turbine ensures high water suction power from the squeegee Each device we offer has individually taken photos, you buy exactly the machine you see TECHNICAL DATA: Power supply voltage: 24 V Brush working width (mm): 380 Suction nozzle working width (mm): 530 Theoretical efficiency (m²): 1140 Brush pressure (kg): 17 Tank capacity (l): 10/10 Weight of the machine ready for operation (kg): ~67 Dimensions (L x W x H) (mm): 790 x 450 x 430 INCLUDED: NEW GEL BATTERIES 12V 25Ah SONNENSCHEIN (2x) Brush cylindrical Suction bar with new oil-resistant rubbers Built-in battery charger Tenzi Normal 5 liters liquid - FREE KEY FEATURES: A 10-liter tank allows you to pour a large amount of cleaning solution, so you don't have to stop working often to refill it Thanks to its design, the machine is very maneuverable. A small turning radius also allows you to work in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface A large working width (380mm) ensures high surface efficiency A very legible and intuitive control panel.

Condition: used, Year of construction: 2016, operating hours: 244 h, The Taski Swingo XP-R is a scrubber-dryer with a stand-on operator platform, providing excellent all-around visibility and easy mounting and dismounting. The Taski Swingo XP-R combines the maneuverability and agility of a smaller unit with outstanding cleaning performance. Gijdenwn A Dopfx Ag Tsl This machine delivers intensive floor cleaning using two round disc brushes and a specialized squeegee assembly. Its unique design allows the operator to work in an ergonomic position and promotes efficient use of water, chemicals, and energy. The large water tank and 24V batteries enable the Taski XP-R to operate effectively for up to 3.5 hours. Besides achieving excellent scrubbing results, it steers exceptionally well. A new generation of electronics and software ensures the best possible driving experience. Additionally, a safety feature automatically shuts down the machine when the operator steps off. Key features of this scrubber-dryer: - Modern, ergonomic design balancing professional appearance with enhanced user comfort - Convenient mounting and dismounting - Full 360-degree visibility around the machine - Larger water tank increases productivity by up to 10% - State-of-the-art electronics and software provide unrivaled driving comfort - Yellow-marked components for daily maintenance - Superior cleaning and drying results for safe floors - Reduced water and energy consumption compared to standard scrubber-dryers - Automatic shutdown when operator leaves the machine All our used machines come standard with: - Complete service and maintenance check - New battery set - Free on-site delivery - Replacement of all wear parts and squeegees - Service and refurbishing - Operation and instruction - Cleaning chemicals - Brushes and accessories tailored to your floor type Other specifications: - Theoretical productivity: 4,500 m²/h - Battery runtime: 3 hours - Scrubbing width: 75 cm - Squeegee width: 95 cm - Number of brushes: 2 - Power supply: 24V battery - Brush diameter: 38 cm Ø - Brush type: Disc - Clean water tank capacity: 113 liters - Dirty water tank capacity: 140 liters - Traction: Wheel-driven - Maximum speed: 6 km/h - Noise level: 69 dB(A) - Weight (net): 207 kg - Weight (ready to use): 452 kg - Dimensions (LxWxH): 160 x 47.5 x 120 cm Metech also provides full maintenance services and supplies for these machines, including orderable cleaning agents. In addition to this used Taski Swingo XP-R, we also offer new scrubber-dryers and other used Taski models. Check our selection or contact us for more information.

Condition: reconditioned (used), Year of construction: 2019, operating hours: 1,744 h, functionality: fully functional, working width: 850 mm, area performance: 6,375 m²/h, overall weight: 805 kg, warranty duration: 12 months, water tank capacity: 200 l, TASKI SWINGO 4000 SCRUBBER NEW 6V 250Ah GEL BATTERIES (SIAP) (4x) Manufactured in 2019 Machine has 1,744 hours of operation. 850mm cleaning head equipped with two new medium-hard disc brushes for work on any surface. New polyurethane squeegee rubbers resistant to oil, grease, and petroleum products. A built-in battery charger simplifies daily operation. The device is equipped with a new, durable drain hose and new suction hoses. A new suction turbine ensures high water suction power from the squeegee. Each device we offer has individually taken photos; you buy exactly what you see. TECHNICAL DATA: Power supply voltage: 24 V Brush working width (mm): 850 Suction width (mm): 1100 Theoretical capacity (m²/h): 6375 Clean/dirty water tank capacity (l): 200/210 Working speed (km/h): 7.5 Number of brushes (pcs): 2 Weight without batteries (kg): 295 Total weight, ready to use (kg): 805 DIMENSIONS: Length with squeegee (mm) 1780 Height (mm) 1400 Width with squeegee (mm) 1100 Width without squeegee (mm) 890W INCLUDED: NEW 6V 250Ah SIAP GEL BATTERIES (x4) NEW 24V 600W suction turbine NEW 430mm PPL 0.5 disc brushes (x2) NEW drain hose NEW suction hoses Built-in battery charger Gsdpfjw A Il Tex Ag Teil Squeegee blade with new oil-resistant rubbers 5L Tenzi Normal fluid - FREE KEY FEATURES: The 200-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. Thanks to its design, the machine is highly maneuverable. A small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface. The ergonomically designed cockpit and centrally located operator's seat provide excellent visibility of the surface being cleaned. The large working width (850 mm) ensures high surface coverage. The control panel is very easy to read and intuitive to use.

Condition: like new (used), Kyocera Taskalfa 4053ci 15 pcs machines For sale in good condition. Giedpfx Agotqucto Tsl Counters below 100k If you take min. 5pcs , we can make a package price for you. For more information please send a message.

Condition: used, 5 axis: yes Milling and turning: yes 5 axis machininng center (milling/turning from bar) Under power in our warehouse MAKE CHIRON MODEL MILL 800 5 axis CNC Fanuc 18iMBS (5 simoultaneous axis 1*) X, Y, Z (mm) 800 – 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min/max 5/65 mm L= 600-1200 mm Highspeed (2) 60m/min. Spindle 20-12.000 min.’ – 140 Nm.12.000 RPM 12,5 KW/Max 34kW Swivelling head (CNC controlled) ± 100° Low hours This machine can be inspected under power in our Warehouse Gijdpsgph Rnofx Ag Tjl Mimu Machine Tools (Italy)

Condition: used, Year of construction: 2021, functionality: fully functional, 3 colour flexo with slotter, rotery die cutter and folder-gluer SERIAL WORK(mm): 1290x2600 Gijdpfxew Rya Ds Ag Tol HOPPER OPERATION(mm): 1550x2600 MIN. CARTON WIDTH(mm): 350x750 MAX. PRINT AREA(mm): 1290x2350 CHANNEL WIDTH(mm): 9 CLICHE THICKNESS(mm): 3.9 MAX. CARDBOARD THICKNESS(mm): 10 CAPACITY (PCS/HOUR): 6000 MAX. ROTERY CUTTING AREA(mm): 1240x2350 CUTTER TIRE THICKNESS(mm): 10 PRESSURE TURN DIAMETER(mm): 399 CLICHÉ PRINT ROLLER DIAMETER(mm): 407 ROTERY FORMWORK ROLLER(mm): 360 ROTERY RUBBER REDIAMETER(mm): 292 MAIN MOTOR POWER(kw): 15

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 500 mm, controller manufacturer: Fanuc, controller model: 31i - Model A5, workpiece length (max.): 500 mm, spindle speed (max.): 20,000 rpm, operating hours of spindle: 5,000 h, tool length: 250 mm, tool diameter: 125 mm, tool weight: 7,500 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 20,000 rpm HSK63 180 tool positions Gisdpfx Agot Azdts Tel IKZ 20 - 80 bar programmable Bar passage Ø 65mm Hainbuch clamping top BZI65 LNS Servo II bar feeder (flat and 4-edge) Renishaw tool measurement/breakage monitoring CLIMATIZED machine room 2 spreader center clamps with hydraulic pressure regulation, Delivery/invoice possible from 2 locations: Swiss plant Austrian plant

Condition: excellent (used), Year of construction: 2007, turning length: 1,545 mm, turning diameter over cross slide: 660 mm, spindle bore: 65 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,545 mm, Make: MAZAK Type: INTEGREX 200-4 ST Control: MAZATROL MATRIX Year: 2007 Multi-Tasking Machining in a Single Machine Setup Sub spindle for overtaking with full C-Axis The INTEGREX IV series can finish all machining processes. High speed, advanced milling spindle that can tilt up to 240 degrees swiveling. Lower turret with rotary tool spindle so livew tooling Chip conveyor with coolant and 15 Bar iKZ Double chuck KNCS-N 210-53 SMW Autoblock MAZAK Flex -GL150F Gantry Loader Gripping range 200 x 120 length x 15 Kg Max. turning Ø: 660mm X-Axis: 580mm Y-Axis: 160mm Z-Axis: 1545mm Giodpfjx S Hm Ijx Ag Tjl B Axis: 270° Spindle bore: 65mm Speedrange: 5000Rpm Spindle power: 22kW Subspindle speeds:5000Rpm Subspindle bore: 65mm Subspindle power: 18.5kW ATC / revolver: 40 B-Axis Toolsystem:Capto C6 B-Axis Speedranges:12000Rpm Length: 5200mm Width: 2550mm Height: 2600mm Weight: 14000kg

Condition: used, Year of construction: 2003, Mazak Integrex E-410H Multi-Tasking Lathe with Mazatrol 640M Pro Control, Serial No. 164385 (2003). Country of Origin: Japan Please note: Toolholders/Tooling photographed in the toolchanger will not be supplied with this machine. Any available tooling will be a specifically described. Gjdpex T Df Dsfx Ag Teil Please Note: This lot is located in Birmingham, UK. A charge of £4,500 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, This listing is for 1 of 4 nonoperational Serosep EntericBio Workstation. This unit is supplied nonoperational and is ready for immediate release. The EntericBio Workstation is an automated system designed to set up reactions for the EntericBio PCR testing system. Key Features and Benefits: - Automation and Efficiency: The workstation automates the transfer of processed samples directly into lyophilized reaction wells, significantly reducing hands-on time for lab personnel. This automation allows staff to focus on other critical tasks while enhancing workflow efficiency. Gedpfx Asxxygfog Toil - Direct Detection: One of the most notable features is its ability to detect target DNA and RNA directly from stool specimens, eliminating the need for commercial nucleic acid extraction or purification. This streamlining of the process not only saves time but also minimizes sample handling. - Flexibility: The EntericBio Workstation offers a comprehensive modular menu capable of testing for a wide array of gastrointestinal pathogens, including bacteria, parasites, CPE, and viruses, all within the same workflow. For example, it can simultaneously identify pathogens such as Salmonella and Norovirus in a single run. - Speed: The system is designed to process up to 46 specimens per run, delivering results in less than 3 hours. Additionally, it can perform consecutive runs every hour, making it ideal for laboratories with high sample volumes. - Accuracy: The EntericBio system boasts a remarkable mean time before failure of over 50 months and a specimen inhibition/failure rate of less than 2%, ensuring reliable results for laboratory testing. - Environmental Benefits: By reducing clinical waste by 88% and consumable storage needs by up to 85% compared to traditional microbiology methods, the EntericBio Workstation contributes to more sustainable laboratory practices. - User-Friendly: Designed for all levels of staff, even those without previous molecular experience can operate the system thanks to its automated interpretation analysis software tailored for specific test kits. This feature enhances accessibility and reduces training time. - Modular Footprint: With its small and modular design, the EntericBio Workstation can be flexibly placed in various laboratory settings, allowing for efficient use of space without compromising functionality.

Condition: excellent (used), Year of construction: 2020, Maximum turning diameter 660mm, Giodpfxeq T Rt Do Ag Tol Swing over bed 660mm, maximum turning length 1,540mm, Traverses X Y Z 630mm, 300mm (+/-150mm), 1585mm, B axis 240degrees (+/- 120), C axis 0.001 degrees, main spindle speed 3,000rpm, milling speed 12,000rpm, bar capacity 102mm, 40 station ATC, Capto C6 taper, spindle power 26/18.5 kw, Fanuc 31iB control, probe, swarf conveyor, hydraulic steady, coolant

Condition: used, Year of construction: 2002, Mazak Integrex E-650H Multi-Tasking Lathe with Mazatrol PC-Fusion 640M Pro Control, 3000mm B/C, SMW-Autoblock KS-MSW 135-460mm Hydraulic Steady, Boring Bar Attachment, 120 ATC, Swarf Conveyor. S/No. 159927 (2002) Country of Origin: Japan Gsdjx T Dfwjpfx Ag Teil Please note: Toolholders/Tooling photographed in the toolchanger will not be supplied with this machine. Any available tooling will be a specifically described. Please Note: This lot is located in Birmingham, UK. A charge of £4,500 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.